[嵌入式TDD实战]TDD开发AT26DF驱动模块(二)：掌控通信

ゝ一纸荒年。 2022-11-30 01:25 184阅读 0赞

### 文章目录 ###

*  前言
 *  芯片概览
 *  依赖于抽象
 *  监控调用
 *   *  测试桩
     *  Mock
 *  结语

# 前言 #

[上一章][Link 1]中，我们把模块最基础的测试框架搭了起来，接下来，在开始疯狂码代码前，我们要先设计下要开发成什么样，那就得了解下我们要开发的东西的基本特性，于是我们翻出了AT26DF321的Datasheet，这个就不给了，网上一搜一大堆，随便自己下一个。

# 芯片概览 #

首先，这是个Flash芯片。

先要明确的是我们现在要搞出的驱动是最底层的那种驱动，直接和硬件交互，和具体芯片耦合的那种。要求使用者明确的知道他在使用的是这款芯片，且对芯片本身特性有一定的了解。而一般情况下，给最终用户使用前还会再经过多层封装；最终用户(比如APP业务开发的人)使用应该是个很抽象的模块，比如操作文件的那种。

通过阅读datasheet，我们可以看到，这个Flash芯片是通过SPI来通信的。MCU是SPI的主机，其作为从机，而且使用的是SPI的mode 0和3，也就是SPI最常用的通信模式，那就很舒服了，不用太管SPI的配置啥的了。我们可以直接抽象出SPI的收发接口，模块直接调用就可。  
![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center][]  
接着往下看：一条命令是用SPI断言CS开始，然后要输出一个8Bit操作码，然后是一些附加参数啥的，然后取消断言来结束操作。  
![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 1][]  
那就十分清晰了，我们的驱动提供的是对命令的抽象接口，这些接口会通过SPI接口去发送和接收各种指令和答复。

那首先先考虑下咱们的模块怎么知道调用哪个SPI接口的问题。

# 依赖于抽象 #

咱的模块需要去调用SPI接口发送和接收数据，一个很自然的写法就是模块直接依赖于SPI模块的接口，在自己初始化时初始化SPI模块，然后发送接收时直接调用对应发送接收函数。

但是这样直接的依赖/耦合也会导致很多问题：

*  管的太宽泛了：SPI模块凭什么由你来初始化？人SPI该怎么初始化，多少波特率，各种设置啥的关你啥事，你个模块就好好的管你的收发就行了。要是多个模块都在自己内部初始化了SPI，那不乱套了？
 *  模块依赖太强：SPI模块可能不止一个，要是直接调用的话，模块还得知道我实际调用的是哪个SPI接口，或要传哪个参数来指定对应SPI。而且那要是突然改了要调用的模块，比如SPI口不够用了，要你改成I/O口模拟的；比如我搞了个TCPIP远程透传SPI；比如……，反正就是不调原来那个模块了你咋办？整个模块所有收发的地方都改掉？
 *  多个模块可能并发使用同一个SPI，那就只好通过锁等方式避免多线程问题，那你这锁往哪里加？要不改SPI模块，要不改每个模块。
 *  比如，虽然我有多个模块用SPI，但是我只想在里这个模块调用SPI时的前后干一些事情，比如打印一些信息啥的。那又咋搞。
 *  ……

为了避免这些问题，在一些能预见有可能需要变动依赖的地方，一般并不会直接去依赖某个具体的模块，而是依赖于抽象。

具体点说，在这个情况下，依赖于接口。在C中的表现形式就是函数指针。

由初始化模块的人主动告知接口，模块在要完成特定功能时只需要按照约定调用接口就行，并不需要知道实现细节，这样就实现了解耦。

于是，我们先为我们的模块搞定一下SPI的抽象。

具体来说就是给各种注册函数指针的接口，然后把函数指针记录在内部，在需要的时候进行调用。具体细节就不说了，下面直接贴出具体实现：

AT26DF.h

#ifndef _AT26DF_H
    #define _AT26DF_H
    #include <stdint.h>
    // description: Register SPI call back functions
    // parameter  : spi_rb   callback function to read byte using SPI
    //              spi_wb   callback function to write byte using SPI
    // return     : 
    // note       : you should register SPI functions through this interface before use the driver.
    void ATD26DF_regFuncSPI(uint8_t (*spi_rb)(void), void (*spi_wb)(uint8_t wb));
    // description: Register SPI call back functions
    // parameter  : spi_rb   callback function to burst read byte using SPI
    //                       NULL   if want to use the default function
    //              spi_wb   callback function to burst write byte using SPI
    //                       NULL   if want to use the default function
    // return     : 
    // note       : if you don't register any functions, the default functions will call the functions
    //              registered by the ATD26DF_regFuncSPI.
    void ATD26DF_regFuncSPIBurst(void (*spi_rb)(uint8_t* pBuf, uint16_t len), 
                                 void (*spi_wb)(const uint8_t* pBuf, uint16_t len));
    // description: Registers call back function for ATD26DF select & deselect.
    // parameter  : cs_sel     callback function for WIZCHIP select
    //              cs_desel   callback fucntion for WIZCHIP deselect
    // return     : 
    // note       : you should register CS functions through this interface before use the driver.
    void ATD26DF_regFuncCS(void(*cs_sel)(void), void(*cs_desel)(void));
    
    #endif

AT26DF.c

#include "common.h"
    #include "AT26DF.h"
    
    static uint8_t _spi_rb_default(void);
    static void _spi_wb_default(uint8_t wb);
    static void _spi_burst_rb_default(uint8_t* pBuf, uint16_t len);
    static void _spi_burst_wb_default(const uint8_t* pBuf, uint16_t len);
    static void _nullFunc(void);
    
    static uint8_t (*_spiRead)(void) = _spi_rb_default;
    static void (*_spiWrite)(uint8_t wb) = _spi_wb_default;
    static void (*_spiBurstRead)(uint8_t* pBuf, uint16_t len) = _spi_burst_rb_default;
    static void (*_spiBurstWrite)(const uint8_t* pBuf, uint16_t len) = _spi_burst_wb_default;
    static void(*_csSel)(void) = _nullFunc;
    static void(*_csDesel)(void) = _nullFunc;
    
    static uint8_t _spi_rb_default(void){
        return 0;}
    static void _spi_wb_default(uint8_t wb){
        (void)wb;}
    static void _spi_burst_rb_default(uint8_t* pBuf, uint16_t len){
        
      while(len > 0){
        
        --len;
        *pBuf++ = _spiRead();
      }
    }
    static void _spi_burst_wb_default(const uint8_t* pBuf, uint16_t len){
        
      while(len > 0){
        
        --len;
        _spiWrite(*pBuf++);
      }
    }
    
    static void _nullFunc(void){
        }
    
    void ATD26DF_regFuncSPI(uint8_t (*spi_rb)(void), void (*spi_wb)(uint8_t wb)){
        
      _spiRead = spi_rb;
      _spiWrite = spi_wb;
    }
    
    void ATD26DF_regFuncSPIBurst(void (*spi_rb)(uint8_t* pBuf, uint16_t len), void (*spi_wb)(const uint8_t* pBuf, uint16_t len)){
        
      if(spi_rb)
        _spiBurstRead = spi_rb;
      else
        _spiBurstRead = _spi_burst_rb_default;
      if(spi_wb)
        _spiBurstWrite = spi_wb;
      else
        _spiBurstWrite = _spi_burst_wb_default;
    }
    
    void ATD26DF_regFuncCS(void(*cs_sel)(void), void(*cs_desel)(void)){
        
      _csSel = cs_sel;
      _csDesel = cs_desel;
    }

SPI的最基本功能就是CS引脚的断言和取消断言，以及读写因此接口也只需要提供这些功能。

# 监控调用 #

现在我们来点测试中的高级内容。

我们知道我们的模块后面会调用这些接口来传送各种指令，那我们要怎么保证那些字节是按照我们希望的那样传送的呢？

## 测试桩 ##

假设我们的模块有一个接口：  
.h

void ATD26DF_outputABC();

我们认为ATD26DF\_outputABC应该要调用我们注册的写接口并依次输出‘A’、‘B’、“C”。  
那我简单用测试桩的写法为它写个测试大概是这么写(先不用实验，大概看看就行)：

static uint8_t _actBuf[20];
    static uint16_t _cnt = 0;
    void _spi_wb_stub(uint8_t b){
        
      _actBuf[_cnt++] = b;
    }
    
    TEST(AT26DF, outputABC){
        
      ATD26DF_regFuncSPI(NULL, _spi_wb_stub);
    
      ATD26DF_outputABC();
    
      TEST_ASSERT_EQUAL_UINT16(3, _cnt);
      TEST_ASSERT_EQUAL_UINT8_ARRAY("ABC", _actBuf, 3);
    }

测试桩的写法满足最简单的场景足够了，但稍微复杂点，或者要涉及多个函数之间调用顺序、检验复杂的输入参数等问题就会很吃力。

## Mock ##

我们直接搞个高级的吧。mock一个SPI接口出来。

你既然看到了这一章，那我默认你已经学了CMock，并搭好了生成环境了。

根据模块的设计，我们需要mock出来的接口其实就4个：

SPI.h

#ifndef _SPIINTERFACE_H
    #define _SPIINTERFACE_H
    #include <stdint.h>
    uint8_t SPI_readByte(void);
    void SPI_writeByte(uint8_t b);
    void SPI_SelectCS(void);
    void SPI_DeselectCS(void);
    #endif

因为你仔细看BrustRead和BrustWrite的默认实现，就是直接依次调用单个的那个接口，所以我们可以直接利用这个特性，只关注单字节的输入输出。

至于生成mock的配置，这样就好了：

SPI.yml

:cmock:
      :plugins:
        - :ignore
        - :ignore_arg
      :enforce_strict_ordering: true

enforce\_strict\_ordering为true是因为我们希望不同接口间的相互顺序也是严格的，换句话说，SelectCS当然得在所有SPI接口之前，DeselectCS必须得在所有SPI接口后。  
ignore\_arg是因为有些命令会要求写些dummybyte，也就是无所谓是什么，所以就会有不需要检查参数的情况。

实际在写的过程中我是写着写着才发现需要怎么修改mock生成参数的，这里不赘述了，反正要是随时发现有新的需求，就重新生成mock，然后覆盖过去就是。

然后我们到CMock下生成mock文件

ruby cmock.rb -oSPI.yml SPI.h

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 2][]  
这样，就有了我们的SPI接口的mock文件

MockSPI.h

/* AUTOGENERATED FILE. DO NOT EDIT. */
    #ifndef _MOCKSPI_H
    #define _MOCKSPI_H
    
    #include "SPI.h"
    
    /* Ignore the following warnings, since we are copying code */
    #if defined(__GNUC__) && !defined(__ICC) && !defined(__TMS470__)
    #if __GNUC__ > 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ > 6 || (__GNUC_MINOR__ == 6 && __GNUC_PATCHLEVEL__ > 0)))
    #pragma GCC diagnostic push
    #endif
    #if !defined(__clang__)
    #pragma GCC diagnostic ignored "-Wpragmas"
    #endif
    #pragma GCC diagnostic ignored "-Wunknown-pragmas"
    #pragma GCC diagnostic ignored "-Wduplicate-decl-specifier"
    #endif
    
    void MockSPI_Init(void);
    void MockSPI_Destroy(void);
    void MockSPI_Verify(void);
    
    
    
    
    #define SPI_readByte_IgnoreAndReturn(cmock_retval) SPI_readByte_CMockIgnoreAndReturn(__LINE__, cmock_retval)
    void SPI_readByte_CMockIgnoreAndReturn(UNITY_LINE_TYPE cmock_line, uint8_t cmock_to_return);
    #define SPI_readByte_ExpectAndReturn(cmock_retval) SPI_readByte_CMockExpectAndReturn(__LINE__, cmock_retval)
    void SPI_readByte_CMockExpectAndReturn(UNITY_LINE_TYPE cmock_line, uint8_t cmock_to_return);
    #define SPI_writeByte_Ignore() SPI_writeByte_CMockIgnore()
    void SPI_writeByte_CMockIgnore(void);
    #define SPI_writeByte_Expect(b) SPI_writeByte_CMockExpect(__LINE__, b)
    void SPI_writeByte_CMockExpect(UNITY_LINE_TYPE cmock_line, uint8_t b);
    #define SPI_writeByte_IgnoreArg_b() SPI_writeByte_CMockIgnoreArg_b(__LINE__)
    void SPI_writeByte_CMockIgnoreArg_b(UNITY_LINE_TYPE cmock_line);
    #define SPI_SelectCS_Ignore() SPI_SelectCS_CMockIgnore()
    void SPI_SelectCS_CMockIgnore(void);
    #define SPI_SelectCS_Expect() SPI_SelectCS_CMockExpect(__LINE__)
    void SPI_SelectCS_CMockExpect(UNITY_LINE_TYPE cmock_line);
    #define SPI_DeselectCS_Ignore() SPI_DeselectCS_CMockIgnore()
    void SPI_DeselectCS_CMockIgnore(void);
    #define SPI_DeselectCS_Expect() SPI_DeselectCS_CMockExpect(__LINE__)
    void SPI_DeselectCS_CMockExpect(UNITY_LINE_TYPE cmock_line);
    
    #if defined(__GNUC__) && !defined(__ICC) && !defined(__TMS470__)
    #if __GNUC__ > 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ > 6 || (__GNUC_MINOR__ == 6 && __GNUC_PATCHLEVEL__ > 0)))
    #pragma GCC diagnostic pop
    #endif
    #endif
    
    #endif

MockSPI.c

/* AUTOGENERATED FILE. DO NOT EDIT. */
    #include <string.h>
    #include <stdlib.h>
    #include <setjmp.h>
    #include "unity.h"
    #include "cmock.h"
    #include "MockSPI.h"
    
    static const char* CMockString_SPI_DeselectCS = "SPI_DeselectCS";
    static const char* CMockString_SPI_SelectCS = "SPI_SelectCS";
    static const char* CMockString_SPI_readByte = "SPI_readByte";
    static const char* CMockString_SPI_writeByte = "SPI_writeByte";
    static const char* CMockString_b = "b";
    
    typedef struct _CMOCK_SPI_readByte_CALL_INSTANCE
    {
        
      UNITY_LINE_TYPE LineNumber;
      uint8_t ReturnVal;
      int CallOrder;
    
    } CMOCK_SPI_readByte_CALL_INSTANCE;
    
    typedef struct _CMOCK_SPI_writeByte_CALL_INSTANCE
    {
        
      UNITY_LINE_TYPE LineNumber;
      int CallOrder;
      uint8_t Expected_b;
      int IgnoreArg_b;
    
    } CMOCK_SPI_writeByte_CALL_INSTANCE;
    
    typedef struct _CMOCK_SPI_SelectCS_CALL_INSTANCE
    {
        
      UNITY_LINE_TYPE LineNumber;
      int CallOrder;
    
    } CMOCK_SPI_SelectCS_CALL_INSTANCE;
    
    typedef struct _CMOCK_SPI_DeselectCS_CALL_INSTANCE
    {
        
      UNITY_LINE_TYPE LineNumber;
      int CallOrder;
    
    } CMOCK_SPI_DeselectCS_CALL_INSTANCE;
    
    static struct MockSPIInstance
    {
        
      int SPI_readByte_IgnoreBool;
      uint8_t SPI_readByte_FinalReturn;
      CMOCK_MEM_INDEX_TYPE SPI_readByte_CallInstance;
      int SPI_writeByte_IgnoreBool;
      CMOCK_MEM_INDEX_TYPE SPI_writeByte_CallInstance;
      int SPI_SelectCS_IgnoreBool;
      CMOCK_MEM_INDEX_TYPE SPI_SelectCS_CallInstance;
      int SPI_DeselectCS_IgnoreBool;
      CMOCK_MEM_INDEX_TYPE SPI_DeselectCS_CallInstance;
    } Mock;
    
    extern jmp_buf AbortFrame;
    int GlobalExpectCount;
    int GlobalVerifyOrder;
    
    void MockSPI_Verify(void)
    {
        
      UNITY_LINE_TYPE cmock_line = TEST_LINE_NUM;
      if (Mock.SPI_readByte_IgnoreBool)
        Mock.SPI_readByte_CallInstance = CMOCK_GUTS_NONE;
      UNITY_SET_DETAIL(CMockString_SPI_readByte);
      UNITY_TEST_ASSERT(CMOCK_GUTS_NONE == Mock.SPI_readByte_CallInstance, cmock_line, CMockStringCalledLess);
      if (Mock.SPI_writeByte_IgnoreBool)
        Mock.SPI_writeByte_CallInstance = CMOCK_GUTS_NONE;
      UNITY_SET_DETAIL(CMockString_SPI_writeByte);
      UNITY_TEST_ASSERT(CMOCK_GUTS_NONE == Mock.SPI_writeByte_CallInstance, cmock_line, CMockStringCalledLess);
      if (Mock.SPI_SelectCS_IgnoreBool)
        Mock.SPI_SelectCS_CallInstance = CMOCK_GUTS_NONE;
      UNITY_SET_DETAIL(CMockString_SPI_SelectCS);
      UNITY_TEST_ASSERT(CMOCK_GUTS_NONE == Mock.SPI_SelectCS_CallInstance, cmock_line, CMockStringCalledLess);
      if (Mock.SPI_DeselectCS_IgnoreBool)
        Mock.SPI_DeselectCS_CallInstance = CMOCK_GUTS_NONE;
      UNITY_SET_DETAIL(CMockString_SPI_DeselectCS);
      UNITY_TEST_ASSERT(CMOCK_GUTS_NONE == Mock.SPI_DeselectCS_CallInstance, cmock_line, CMockStringCalledLess);
    }
    
    void MockSPI_Init(void)
    {
        
      MockSPI_Destroy();
    }
    
    void MockSPI_Destroy(void)
    {
        
      CMock_Guts_MemFreeAll();
      memset(&Mock, 0, sizeof(Mock));
      GlobalExpectCount = 0;
      GlobalVerifyOrder = 0;
    }
    
    uint8_t SPI_readByte(void)
    {
        
      UNITY_LINE_TYPE cmock_line = TEST_LINE_NUM;
      CMOCK_SPI_readByte_CALL_INSTANCE* cmock_call_instance;
      UNITY_SET_DETAIL(CMockString_SPI_readByte);
      cmock_call_instance = (CMOCK_SPI_readByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(Mock.SPI_readByte_CallInstance);
      Mock.SPI_readByte_CallInstance = CMock_Guts_MemNext(Mock.SPI_readByte_CallInstance);
      if (Mock.SPI_readByte_IgnoreBool)
      {
        
        UNITY_CLR_DETAILS();
        if (cmock_call_instance == NULL)
          return Mock.SPI_readByte_FinalReturn;
        Mock.SPI_readByte_FinalReturn = cmock_call_instance->ReturnVal;
        return cmock_call_instance->ReturnVal;
      }
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringCalledMore);
      cmock_line = cmock_call_instance->LineNumber;
      if (cmock_call_instance->CallOrder > ++GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledEarly);
      if (cmock_call_instance->CallOrder < GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledLate);
      UNITY_CLR_DETAILS();
      return cmock_call_instance->ReturnVal;
    }
    
    void SPI_readByte_CMockIgnoreAndReturn(UNITY_LINE_TYPE cmock_line, uint8_t cmock_to_return)
    {
        
      CMOCK_MEM_INDEX_TYPE cmock_guts_index = CMock_Guts_MemNew(sizeof(CMOCK_SPI_readByte_CALL_INSTANCE));
      CMOCK_SPI_readByte_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_readByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(cmock_guts_index);
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringOutOfMemory);
      memset(cmock_call_instance, 0, sizeof(*cmock_call_instance));
      Mock.SPI_readByte_CallInstance = CMock_Guts_MemChain(Mock.SPI_readByte_CallInstance, cmock_guts_index);
      Mock.SPI_readByte_IgnoreBool = (int)0;
      cmock_call_instance->LineNumber = cmock_line;
      cmock_call_instance->ReturnVal = cmock_to_return;
      Mock.SPI_readByte_IgnoreBool = (int)1;
    }
    
    void SPI_readByte_CMockExpectAndReturn(UNITY_LINE_TYPE cmock_line, uint8_t cmock_to_return)
    {
        
      CMOCK_MEM_INDEX_TYPE cmock_guts_index = CMock_Guts_MemNew(sizeof(CMOCK_SPI_readByte_CALL_INSTANCE));
      CMOCK_SPI_readByte_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_readByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(cmock_guts_index);
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringOutOfMemory);
      memset(cmock_call_instance, 0, sizeof(*cmock_call_instance));
      Mock.SPI_readByte_CallInstance = CMock_Guts_MemChain(Mock.SPI_readByte_CallInstance, cmock_guts_index);
      Mock.SPI_readByte_IgnoreBool = (int)0;
      cmock_call_instance->LineNumber = cmock_line;
      cmock_call_instance->CallOrder = ++GlobalExpectCount;
      cmock_call_instance->ReturnVal = cmock_to_return;
      UNITY_CLR_DETAILS();
    }
    
    void SPI_writeByte(uint8_t b)
    {
        
      UNITY_LINE_TYPE cmock_line = TEST_LINE_NUM;
      CMOCK_SPI_writeByte_CALL_INSTANCE* cmock_call_instance;
      UNITY_SET_DETAIL(CMockString_SPI_writeByte);
      cmock_call_instance = (CMOCK_SPI_writeByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(Mock.SPI_writeByte_CallInstance);
      Mock.SPI_writeByte_CallInstance = CMock_Guts_MemNext(Mock.SPI_writeByte_CallInstance);
      if (Mock.SPI_writeByte_IgnoreBool)
      {
        
        UNITY_CLR_DETAILS();
        return;
      }
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringCalledMore);
      cmock_line = cmock_call_instance->LineNumber;
      if (cmock_call_instance->CallOrder > ++GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledEarly);
      if (cmock_call_instance->CallOrder < GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledLate);
      if (!cmock_call_instance->IgnoreArg_b)
      {
        
        UNITY_SET_DETAILS(CMockString_SPI_writeByte,CMockString_b);
        UNITY_TEST_ASSERT_EQUAL_HEX8(cmock_call_instance->Expected_b, b, cmock_line, CMockStringMismatch);
      }
      UNITY_CLR_DETAILS();
    }
    
    void CMockExpectParameters_SPI_writeByte(CMOCK_SPI_writeByte_CALL_INSTANCE* cmock_call_instance, uint8_t b)
    {
        
      cmock_call_instance->Expected_b = b;
      cmock_call_instance->IgnoreArg_b = 0;
    }
    
    void SPI_writeByte_CMockIgnore(void)
    {
        
      Mock.SPI_writeByte_IgnoreBool = (int)1;
    }
    
    void SPI_writeByte_CMockExpect(UNITY_LINE_TYPE cmock_line, uint8_t b)
    {
        
      CMOCK_MEM_INDEX_TYPE cmock_guts_index = CMock_Guts_MemNew(sizeof(CMOCK_SPI_writeByte_CALL_INSTANCE));
      CMOCK_SPI_writeByte_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_writeByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(cmock_guts_index);
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringOutOfMemory);
      memset(cmock_call_instance, 0, sizeof(*cmock_call_instance));
      Mock.SPI_writeByte_CallInstance = CMock_Guts_MemChain(Mock.SPI_writeByte_CallInstance, cmock_guts_index);
      Mock.SPI_writeByte_IgnoreBool = (int)0;
      cmock_call_instance->LineNumber = cmock_line;
      cmock_call_instance->CallOrder = ++GlobalExpectCount;
      CMockExpectParameters_SPI_writeByte(cmock_call_instance, b);
      UNITY_CLR_DETAILS();
    }
    
    void SPI_writeByte_CMockIgnoreArg_b(UNITY_LINE_TYPE cmock_line)
    {
        
      CMOCK_SPI_writeByte_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_writeByte_CALL_INSTANCE*)CMock_Guts_GetAddressFor(CMock_Guts_MemEndOfChain(Mock.SPI_writeByte_CallInstance));
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringIgnPreExp);
      cmock_call_instance->IgnoreArg_b = 1;
    }
    
    void SPI_SelectCS(void)
    {
        
      UNITY_LINE_TYPE cmock_line = TEST_LINE_NUM;
      CMOCK_SPI_SelectCS_CALL_INSTANCE* cmock_call_instance;
      UNITY_SET_DETAIL(CMockString_SPI_SelectCS);
      cmock_call_instance = (CMOCK_SPI_SelectCS_CALL_INSTANCE*)CMock_Guts_GetAddressFor(Mock.SPI_SelectCS_CallInstance);
      Mock.SPI_SelectCS_CallInstance = CMock_Guts_MemNext(Mock.SPI_SelectCS_CallInstance);
      if (Mock.SPI_SelectCS_IgnoreBool)
      {
        
        UNITY_CLR_DETAILS();
        return;
      }
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringCalledMore);
      cmock_line = cmock_call_instance->LineNumber;
      if (cmock_call_instance->CallOrder > ++GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledEarly);
      if (cmock_call_instance->CallOrder < GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledLate);
      UNITY_CLR_DETAILS();
    }
    
    void SPI_SelectCS_CMockIgnore(void)
    {
        
      Mock.SPI_SelectCS_IgnoreBool = (int)1;
    }
    
    void SPI_SelectCS_CMockExpect(UNITY_LINE_TYPE cmock_line)
    {
        
      CMOCK_MEM_INDEX_TYPE cmock_guts_index = CMock_Guts_MemNew(sizeof(CMOCK_SPI_SelectCS_CALL_INSTANCE));
      CMOCK_SPI_SelectCS_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_SelectCS_CALL_INSTANCE*)CMock_Guts_GetAddressFor(cmock_guts_index);
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringOutOfMemory);
      memset(cmock_call_instance, 0, sizeof(*cmock_call_instance));
      Mock.SPI_SelectCS_CallInstance = CMock_Guts_MemChain(Mock.SPI_SelectCS_CallInstance, cmock_guts_index);
      Mock.SPI_SelectCS_IgnoreBool = (int)0;
      cmock_call_instance->LineNumber = cmock_line;
      cmock_call_instance->CallOrder = ++GlobalExpectCount;
      UNITY_CLR_DETAILS();
    }
    
    void SPI_DeselectCS(void)
    {
        
      UNITY_LINE_TYPE cmock_line = TEST_LINE_NUM;
      CMOCK_SPI_DeselectCS_CALL_INSTANCE* cmock_call_instance;
      UNITY_SET_DETAIL(CMockString_SPI_DeselectCS);
      cmock_call_instance = (CMOCK_SPI_DeselectCS_CALL_INSTANCE*)CMock_Guts_GetAddressFor(Mock.SPI_DeselectCS_CallInstance);
      Mock.SPI_DeselectCS_CallInstance = CMock_Guts_MemNext(Mock.SPI_DeselectCS_CallInstance);
      if (Mock.SPI_DeselectCS_IgnoreBool)
      {
        
        UNITY_CLR_DETAILS();
        return;
      }
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringCalledMore);
      cmock_line = cmock_call_instance->LineNumber;
      if (cmock_call_instance->CallOrder > ++GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledEarly);
      if (cmock_call_instance->CallOrder < GlobalVerifyOrder)
        UNITY_TEST_FAIL(cmock_line, CMockStringCalledLate);
      UNITY_CLR_DETAILS();
    }
    
    void SPI_DeselectCS_CMockIgnore(void)
    {
        
      Mock.SPI_DeselectCS_IgnoreBool = (int)1;
    }
    
    void SPI_DeselectCS_CMockExpect(UNITY_LINE_TYPE cmock_line)
    {
        
      CMOCK_MEM_INDEX_TYPE cmock_guts_index = CMock_Guts_MemNew(sizeof(CMOCK_SPI_DeselectCS_CALL_INSTANCE));
      CMOCK_SPI_DeselectCS_CALL_INSTANCE* cmock_call_instance = (CMOCK_SPI_DeselectCS_CALL_INSTANCE*)CMock_Guts_GetAddressFor(cmock_guts_index);
      UNITY_TEST_ASSERT_NOT_NULL(cmock_call_instance, cmock_line, CMockStringOutOfMemory);
      memset(cmock_call_instance, 0, sizeof(*cmock_call_instance));
      Mock.SPI_DeselectCS_CallInstance = CMock_Guts_MemChain(Mock.SPI_DeselectCS_CallInstance, cmock_guts_index);
      Mock.SPI_DeselectCS_IgnoreBool = (int)0;
      cmock_call_instance->LineNumber = cmock_line;
      cmock_call_instance->CallOrder = ++GlobalExpectCount;
      UNITY_CLR_DETAILS();
    }

把这两个文件加入咱的工程中。因为这是对SPI的mock，其实我更倾向于把它们放到SPI/test目录下，注意添加include目录。当然你要放到AT26DF/test下也没有问题。记得把上面那个SPI.h文件也放过去。

注：如果后面编译时发现报错无法解析的外部符号。  
![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 3][]  
打开MockSPI.c，把GlobalExpectCount和GlobalVerifyOrder前的extern删掉就好。  
![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 4][]  
那这样子，我们的那个小测试就变成这样写了：

#include "MockSPI.h"
    ……
    TEST(AT26DF, outputABC){
        
      MockSPI_Init();
      ATD26DF_regFuncSPI(SPI_readByte, SPI_writeByte);
      ATD26DF_regFuncCS(SPI_SelectCS, SPI_DeselectCS);
      SPI_writeByte_Expect('A');
      SPI_writeByte_Expect('B');
      SPI_writeByte_Expect('C');
    
      ATD26DF_outputABC();
      
      MockSPI_Verify();
      MockSPI_Destroy();
    }

在每个单元测试里，我们把我们的mock接口注册给模块使用，设置我们的期望，最后验证接口是否如期望那样运作。

mock不仅可以监视特定函数怎么被调用的，还能监视不同函数间按什么顺序被调用，每次调用时返回什么值，这样会精细的操作。

# 结语 #

这一章中，我们为模块设计了一个依赖于抽象的通信方案，造好了监控模块通信细节的工具。但其实我们还没真正开始写测试用例，后面，我们来看看整个TDD写测试的过程。

[Link 1]: https://blog.csdn.net/lin_strong/article/details/91491740
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center]: /images/20221124/327bcde22f034b89bd2523e130483ede.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 1]: /images/20221124/4acb3d80cb744169b67e6a0694dfc735.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 2]: /images/20221124/40659c5e5e744cb283a0d30ae186d800.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 3]: /images/20221124/90314d94c4364be5baa96344e4f31d4d.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xpbl9zdHJvbmc_size_16_color_FFFFFF_t_70_pic_center 4]: /images/20221124/86eee1faef7748fc9c41cf16bd08b9a5.png