自动编译搭建lnmp

╰半橙微兮° 2022-07-17 03:53 182阅读 0赞

\#!/bin/bash  
\#by liuweigan 2016/8/22  
\#检查当前用户是否root用户  
if \[ $(id -u) != "0" \]; then  
echo "Error: You must be root to run this script, please use root!"  
exit 1  
fi  
Color\_Text()  
\{  
echo -e " \\e\[0;$2m$1\\e\[0m"  
\}  
Echo\_Red()  
\{  
echo $(Color\_Text "$1" "31")  
\}  
Echo\_Green()  
\{  
echo $(Color\_Text "$1" "32")  
\}  
\#选择环境是否安装mysql  
Stack=$1  
case "$\{Stack\}" in  
lnmp)  
InstallMysql=YES  
;;  
web)  
InstallMysql=NO  
;;  
\*)  
Echo\_Red "Usage: $0 \{lnmp|web\}"  
Echo\_Green "WARNING:Select web will not install mysql on this server!"  
exit  
;;  
esac  
\#基础环境安装  
yum -y install wget gcc gcc-c++ make autoconf automake libtool  
\#安装包下载  
mkdir -p /data/soft  
rm /data/soft/\* -rf  
cd /data/soft  
wget http://exim.mirror.fr/pcre/pcre-8.34.tar.gz || \{ echo pcre wget error;exit; \}  
wget http://zlib.net/zlib-1.2.8.tar.gz || \{ echo zlib wget error;exit; \}  
wget http://www.openssl.org/source/openssl-1.0.1c.tar.gz || \{ echo openssl wget error;exit; \}  
wget http://nginx.org/download/nginx-1.8.0.tar.gz || \{ echo nginx wget error;exit; \}  
wget http://cn2.php.net/distributions/php-5.4.31.tar.gz || \{ echo php wget error;exit; \}  
wget http://nchc.dl.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz || \{ echo libmcrypt wget error;exit; \}  
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz || \{ echo libiconv wget error;exit; \}  
wget http://pecl.php.net/get/mongo-1.6.11.tgz || \{ echo mongo wget error;exit; \}  
wget http://pecl.php.net/get/memcache-3.0.6.tgz || \{ echo memcache wget error;exit; \}  
wget https://github.com/phpredis/phpredis/archive/2.2.4.tar.gz || \{ echo phpredis wget error;exit; \}  
wget http://pecl.php.net/get/imagick-3.1.0RC1.tgz || \{ echo imagick wget error;exit; \}  
\#lnmp环境下mysql和web一个服务器  
if \[ $InstallMysql = YES \];then  
wget http://www.cmake.org/files/v2.8/cmake-2.8.10.2.tar.gz || \{ echo cmake wget error;exit; \}  
wget http://ftp.ntu.edu.tw/pub/MySQL/Downloads/MySQL-5.5/mysql-5.5.50.tar.gz || \{ echo mysql wget error;exit; \}  
fi  
\#ImageMagick下载的是最新版本7，无法编译通过，所以使用旧版本6，这里使用6.9.5-8  
wget http://www.imagemagick.org/download/ImageMagick-6.9.5-8.tar.gz || \{ echo ImageMagick wget error;exit; \}  
\#解压缩  
tarfiles=\`ls -1p | grep -v '/'\`  
for tarfile in $\{tarfiles\}  
do  
echo tar -zxvf $\{tarfile\}  
tar -zxvf $\{tarfile\}  
done  
\#安装pcre  
echo =======================================  
echo "start install pcre。。。。。。。。。。"  
echo =======================================  
cd /data/soft/pcre-8.34  
./configure --prefix=/usr/local/pcre  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:pcre install ok!"  
echo =======================================  
else  
echo "error:pcre install fail!"  
exit  
fi  
\#安装zlib  
echo =======================================  
echo "start install zlib。。。。。。。。。。"  
echo =======================================  
cd /data/soft/zlib-1.2.8  
./configure --prefix=/usr/local/zlib  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:zlib install ok!"  
echo =======================================  
else  
echo "error:zlib install fail!"  
exit  
fi  
\#安装openssl  
echo =======================================  
echo "start install openssl。。。。。。。。。。"  
echo =======================================  
cd /data/soft/openssl-1.0.1c  
./config --prefix=/usr/local/openssl  
make &&make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:openssl install ok!"  
echo =======================================  
else  
echo "error:openssl install fail!"  
exit  
fi  
\#安装nginx  
echo =======================================  
echo "start install nginx。。。。。。。。。。"  
echo =======================================  
mkdir -p /usr/local/webserver  
cd /data/soft/nginx-1.8.0  
./configure --prefix=/usr/local/webserver/nginx --user=nginx --group=nginx --sbin-path=/usr/local/webserver/nginx/nginx --conf-path=/usr/local/webserver/nginx/nginx.conf --pid-path=/usr/local/webserver/nginx/nginx.pid --with-http\_ssl\_module --with-pcre=/data/soft/pcre-8.34 --with-zlib=/data/soft/zlib-1.2.8 --with-openssl=/data/soft/openssl-1.0.1c  
make &&make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:nginx install ok!"  
echo =======================================  
else  
echo "error:nginx install fail!"  
exit  
fi  
\#nginx用户和用户组  
cat /etc/group|grep -iq nginx && echo 'group nginx already exists！' || groupadd nginx  
cat /etc/passwd|grep -iq nginx && echo 'user nginx already exists！' || useradd nginx -g nginx -M -s /sbin/nologin  
\#安装mysql  
\#基础环境安装  
if \[ $InstallMysql = YES \];then  
echo =======================================  
echo "start install mysql。。。。。。。。。。"  
echo =======================================  
yum -y install wget gcc gcc-c++ make ncurses-devel  
cd /data/soft/cmake-2.8.10.2  
./configure  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:cmake install ok!"  
echo =======================================  
else  
echo "error:cmake install fail!"  
exit  
fi  
\#mysql用户和用户组  
cat /etc/group|grep -iq mysql && echo 'group mysql already exists！' || groupadd mysql  
cat /etc/passwd|grep -iq mysql && echo 'user mysql already exists！' || useradd -M -g mysql -s /sbin/nologin mysql  
\#mysql数据目录  
mkdir -p /wwwroot/database/mysql/data  
chown -R mysql.mysql /wwwroot/database/mysql/data  
cd /data/soft/mysql-5.5.50  
cmake -DCMAKE\_INSTALL\_PREFIX=/usr/local/mysql -DMYSQL\_UNIX\_ADDR=/tmp/mysql.sock -DDEFAULT\_CHARSET=utf8 -DDEFAULT\_COLLATION=utf8\_general\_ci -DWITH\_INNOBASE\_STORAGE\_ENGINE=1 -DWITH\_ARCHIVE\_STORAGE\_ENGINE=1 -DWITH\_BLACKHOLE\_STORAGE\_ENGINE=1 -DWITH\_PARTITION\_STORAGE\_ENGINE=1 -DENABLED\_LOCAL\_INFILE=1 -DMYSQL\_DATADIR=/wwwroot/database/mysql/data -DMYSQL\_USER=mysql -DMYSQL\_TCP\_PORT=3306  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:mysql install ok!"  
echo =======================================  
else  
echo "error:mysql install fail!"  
exit  
fi  
fi  
\#php安装  
\#基础环境安装  
yum -y install bzip2 bzip2-devel curl curl-devel libjpeg libjpeg-devel libpng libpng-devel freetype-devel libxml2 libxml2-devel openssl openssl-devel  
\#libiconv  
cd /data/soft/libiconv-1.14  
./configure --prefix=/usr/local/libiconv  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:libiconv install ok!"  
echo =======================================  
else  
echo "error:libiconv install fail!"  
exit  
fi  
make && make install  
\#libmcrypt  
cd /data/soft/libmcrypt-2.5.8  
./configure --prefix=/usr/local/libmcrypt  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:libmcrypt install ok!"  
echo =======================================  
else  
echo "error:libmcrypt install fail!"  
exit  
fi  
\#php  
echo =======================================  
echo "start install php。。。。。。。。。。"  
echo =======================================  
cd /data/soft/php-5.4.31  
if \[ $InstallMysql = YES \];then  
./configure --prefix=/usr/local/webserver/php --with-libxml-dir=/usr/include/libxml2 --with-config-file-path=/usr/local/webserver/php/etc --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx --with-pear --with-curl --with-gd --with-jpeg-dir=/usr/lib64/ --with-png-dir=/usr/lib/ --with-freetype-dir=/usr/lib64/ --with-iconv=/usr/local/libiconv/ --with-mcrypt=/usr/local/libmcrypt/ --with-zlib --with-zlib-dir=/usr/local/zlib --with-bz2 --with-xmlrpc --with-openssl --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql\_config --with-pdo-mysql=/usr/local/mysql --disable-debug --enable-zip --enable-sockets --enable-soap --enable-mbstring --enable-xml --enable-ftp --enable-exif --enable-wddx --enable-bcmath --enable-shmop --enable-dba --enable-sysvsem --enable-sysvshm --enable-sysvmsg  
else  
./configure --prefix=/usr/local/webserver/php --with-libxml-dir=/usr/include/libxml2 --with-config-file-path=/usr/local/webserver/php/etc --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx --with-pear --with-curl --with-gd --with-jpeg-dir=/usr/lib64/ --with-png-dir=/usr/lib/ --with-freetype-dir=/usr/lib64/ --with-iconv=/usr/local/libiconv/ --with-mcrypt=/usr/local/libmcrypt/ --with-zlib --with-zlib-dir=/usr/local/zlib --with-bz2 --with-xmlrpc --with-openssl --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --disable-debug --enable-zip --enable-sockets --enable-soap --enable-mbstring --enable-xml --enable-ftp --enable-exif --enable-wddx --enable-bcmath --enable-shmop --enable-dba --enable-sysvsem --enable-sysvshm --enable-sysvmsg  
fi  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:php install ok!"  
echo =======================================  
else  
echo "error:php install fail!"  
exit  
fi  
cp php.ini-development /usr/local/webserver/php/etc/php.ini  
cd /usr/local/webserver/php/etc  
cp php-fpm.conf.default php-fpm.conf  
  
\#php相关扩展安装  
\#mongoDB扩展  
echo =======================================  
echo "start install mongo。。。。。。。。。。"  
echo =======================================  
cd /data/soft/mongo-1.6.11  
/usr/local/webserver/php/bin/phpize  
./configure --with-php-config=/usr/local/webserver/php/bin/php-config  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:mongo install ok!"  
echo =======================================  
else  
echo "error:mongo install fail!"  
exit  
fi  
\#phpredis扩展  
echo =======================================  
echo "start install phpredis。。。。。。。。。。"  
echo =======================================  
cd /data/soft/phpredis-2.2.4  
/usr/local/webserver/php/bin/phpize  
./configure --with-php-config=/usr/local/webserver/php/bin/php-config  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:phpredis install ok!"  
echo =======================================  
else  
echo "error:phpredis install fail!"  
exit  
fi  
\#memcache  
echo =======================================  
echo "start install memcache。。。。。。。。。。"  
echo =======================================  
cd /data/soft/memcache-3.0.6  
/usr/local/webserver/php/bin/phpize  
./configure --enable-memcache --with-php-config=/usr/local/webserver/php/bin/php-config --with-zlib-dir  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:memcache install ok!"  
echo =======================================  
else  
echo "error:memcache install fail!"  
exit  
fi  
\#imagick扩展  
\#此扩展需依赖ImageMagick库，先安装ImageMagick。  
echo =======================================  
echo "start install ImageMagick。。。。。。。。。。"  
echo =======================================  
cd /data/soft/ImageMagick-6.9.5-8  
./configure --enable-shared --without-perl  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:ImageMagick install ok!"  
echo =======================================  
else  
echo "error:ImageMagick install fail!"  
exit  
fi  
\#因为新版本的ImageMagick编译出来的目录为ImageMagick-6，必须为ImageMagick才行，否则会出现错误。  
ln -s /usr/local/include/ImageMagick-6 /usr/local/include/ImageMagick  
cd /data/soft/imagick-3.1.0RC1  
/usr/local/webserver/php/bin/phpize  
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-imagick=/usr/local/include/ImageMagick  
make && make install  
if \[ $? = 0 \];then  
echo =======================================  
echo "success:imagick install ok!"  
echo =======================================  
else  
echo "error:imagick install fail!"  
exit  
fi  
echo "\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*"  
echo "lnmp all install complete。。。。。。。"  
echo "\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*"  
\#仔细查看如下注释的部分，手动设置相关内容。  
\#防火墙放开80和3306端口。  
\#vim /etc/sysconfig/iptables  
:<<!  
添加如下规则，并保存：  
\-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT  
\-A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT  
!  
\#service iptables restart  
  
\#设置nginx  
\#vim /etc/init.d/nginx  
:<<!  
\#!/bin/bash  
\#  
\#chkconfig: - 85 15  
\#description:nginxisaWorldWideWebserver.Itisusedtoserve  
\# processname: nginx  
  
nginx=/usr/local/webserver/nginx/nginx  
nginx\_config=/usr/local/webserver/nginx/nginx.conf  
nginx\_pid=/usr/local/webserver/nginx/nginx.pid  
RETVAL=0  
prog="nginx"  
\# Source function library.  
. /etc/rc.d/init.d/functions  
\# Source networking configuration.  
. /etc/sysconfig/network  
\# Check that networking is up.  
\[ $\{NETWORKING\} = "no" \] && exit 0  
\[ -x $nginx \] || exit 0  
\# Start nginx daemons functions.  
start() \{  
if \[ -e $nginx\_pid \];then  
echo "nginx already running...."  
exit 1  
fi  
echo -n $"Starting $prog: "  
daemon $nginx -c $\{nginx\_config\}  
RETVAL=$?  
echo  
\[ $RETVAL = 0 \] && touch /var/lock/subsys/nginx  
return $RETVAL  
\}  
\# Stop nginx daemons functions.  
stop() \{  
echo -n $"Stopping $prog: "  
killproc $nginx  
RETVAL=$?  
echo  
\[ $RETVAL = 0 \] && rm -f /var/lock/subsys/nginx $nginx\_pid  
\}  
\# reload nginx service functions.  
reload() \{  
echo -n $"Reloading $prog: "  
killproc $nginx -HUP  
RETVAL=$?  
echo  
\}  
\# See how we were called.  
case "$1" in  
start)  
start  
;;  
stop)  
stop  
;;  
reload)  
reload  
;;  
restart)  
stop  
start  
;;  
status)  
status $prog  
RETVAL=$?  
;;  
\*)  
echo $"Usage: $prog \{start|stop|restart|reload|status|help\}"  
exit 1  
esac  
exit $RETVAL  
!  
\#:wq保存此文件。  
:<<!  
chmod +x /etc/init.d/nginx  
chkconfig --add nginx  
chkconfig --level 345 nginx on  
service nginx start  
!  
\#查看nginx是否正常启动。  
\#浏览器访问http://服务器IP，查看是否显示正常。  
  
\#mysql设置  
:<<!  
cd /usr/local/mysql  
cp -f support-files/my-huge.cnf /etc/my.cnf  
chown -R mysql.mysql /wwwroot/database/mysql/data/  
!  
\#vim /etc/my.cnf  
:<<!  
socket = /tmp/mysqld.sock  
key\_buffer\_size = 384M  
max\_allowed\_packet = 16M  
innodb\_data\_home\_dir = /data/mysql/data 去掉\#  
innodb\_data\_file\_path = ibdata1:2000M;ibdata2:10M;autoextend 去掉\#  
innodb\_log\_group\_home\_dir = /data/mysql/data 去掉\#  
innodb\_buffer\_pool\_size = 384M 去掉\#  
innodb\_additional\_mem\_pool\_size = 20M 去掉\#  
innodb\_log\_file\_size = 100M 去掉\#  
innodb\_log\_buffer\_size = 8M 去掉\#  
innodb\_flush\_log\_at\_trx\_commit = 1 去掉\#  
innodb\_lock\_wait\_timeout = 50 去掉\#  
!  
\#:wq保存文件。  
:<<!  
scripts/mysql\_install\_db --datadir=/wwwroot/database/mysql/data/ --user=mysql  
cp support-files/mysql.server /etc/init.d/mysql  
chmod +x /etc/init.d/mysql  
chkconfig --add mysql  
chkconfig mysql off  
chkconfig --level 345 mysql on  
service mysql start  
!  
\#查看mysql是否正常启动。  
\#设置mysql登录。  
:<<!  
默认mysql的root是没有密码的，可直接登录。如下：  
/usr/local/mysql/bin/mysql -u root  
mysql> use mysql;  
添加root用户并所有服务器可登录：  
mysql> grant all privileges on \*.\* to root@'%' identified by "meiliwang2016";  
删除所有密码为空的的mysql用户。  
mysql> delete from user where password='';  
mysql> flush privileges;  
mysql> quit  
测试下：  
\[root@mysql mysql\]\#/usr/local/mysql/bin/mysql -u root -p  
输入密码meiliwang2016是否可正常登录mysql。  
!  
  
\#php设置  
\#cd /usr/local/webserver/php/etc  
\#vim php-fpm.conf  
\#pid = run/php-fpm.pid //此行在后面做开机启动时需要，否则service php-fpm restart找不到pid文件。  
\#:wq保存文件。  
  
\#vim php.ini  
\#时区修改为date.timezone =PRC  
\#:wq保存文件。  
  
\#启动php-fpm  
\#/usr/local/webserver/php/sbin/php-fpm  
\#检查php-fpm是否正常启动。  
  
\#修改nginx配置解析php  
\#vim /usr/local/webserver/nginx/nginx.conf  
:<<!  
location / \{  
root html;  
index index.html index.htm index.php;  
\}\#此处添加index.php  
location ~ \\.php$ \{  
root html;  
fastcgi\_pass 127.0.0.1:9000;  
fastcgi\_index index.php;  
fastcgi\_param SCRIPT\_FILENAME $document\_root$fastcgi\_script\_name;  
include fastcgi\_params;  
\}\#添加此段配置。  
!  
\#:wq保存文件。  
\#重启nginx  
\#service nginx restart  
  
\#测试php页面是否正常  
\#cd /usr/local/webserver/nginx/html/  
:<<!  
vim test.php  
<?php  
phpinfo();  
?>  
!  
\#:wq保存文件。  
\#浏览器访问http://服务器IP/test.php，查看是否显示正常。  
  
\#php-fpm开机启动  
:<<!  
cp /data/soft/php-5.4.31/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm  
chmod +x /etc/init.d/php-fpm  
chkconfig --add php-fpm  
chkconfig --level 345 php-fpm on  
!  
\#测试php-fpm能否正常重启。  
\#service php-fpm restart  
  
\#相关扩展设置  
\#查看是否在如下路径存在相应的so文件。  
\#/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20100525/  
\#文件最后添加扩展。  
\#vim /usr/local/webserver/php/etc/php.ini  
:<<!  
\[memcache\]  
extension=memcache.so  
  
\[redis\]  
extension=redis.so  
  
\[imagick\]  
extension=imagick.so  
  
\[mongo\]  
extension=mongo.so  
!  
\#:wq保存文件。  
\#重启php-fpm。  
\#service php-fpm restart  
\#通过访问http://服务器IP/test.php查看相应的扩展是否enable。