使用shell脚本监控服务器内存和cpu使用量，自动清理无效内存（补充篇）

本是古典何须时尚 2022-06-07 09:43 591阅读 0赞

公司服务器经常性由于内存溢出奔溃，再找到问题解决问题之前，先使用了一种过渡手段暂缓问题的发生，那就是使用使用shell脚本监控服务器内存和cpu使用量，自动清理无效内存，脚本代码如下，里面有对应的解释。

本片博客是上一篇《[增加定时检测linux占用内存，及时清理功能][linux]》的补充

代码如下：

#!/bin/bash
    echo "current time is $(date -d "today" +"%Y-%m-%d-%H-%M-%S")"  >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #系统分配的区总量 
    mem_total=`free | grep "Mem:" |awk '{print $2}'` 
    echo "mem_total is $mem_total " >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #当前剩余的大小 
    mem_free=`free | grep 'buffers/cache' | awk '{print $3}'`
    
    echo "mem_free is $mem_free" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #当前已使用的used大小 
    mem_used=`free -m | grep Mem | awk '{print  $3}'` 
    echo "mem_used is $mem_used" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    if (($mem_used != 0)); then 
     
    #如果已被使用，则计算当前剩余free所占总量的百分比，用小数来表示，要在小数点前面补一个整数位0 
    mem_per=0`echo "scale=2;$mem_free/$mem_total" | bc` 
    echo "free percent is $mem_per" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    DATA="$(date -d "today" +"%Y-%m-%d-%H-%M-%S") free percent is : $mem_per"
    echo $DATA >> /usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    echo $DATA >> /var/log/mem_detect.log
    #设置的告警值为44%(即使用超过56%的时候告警)。 
    mem_warn=0.4 
    echo "mem_warn is $mem_warn"  >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #当前剩余百分比与告警值进行比较（当大于告警值(即剩余44%以上)时会返回1，小于(即剩余不足44%)时会返回0 ） 
    mem_now=`expr $mem_per \> $mem_warn` 
    echo "剩余百分比与警告值比较 mem_now is $mem_now"  >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    echo "when mem_now is 1 , means mem is ok ! "  >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    
    echo "-----------------------------------" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #如果当前使用超过56%（即剩余小于44%，上面的返回值等于0），释放内存
    if (($mem_now == 0)); then 
    echo "but now the mem_now is 0 ,小于(即内存剩余不足44%)，所以清理内存, start to clear memery....." >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    sync
    echo 1 > /proc/sys/vm/drop_caches
    echo 2 > /proc/sys/vm/drop_caches
    echo 3 > /proc/sys/vm/drop_caches
    echo "---> start auto clear memery is OK ! $DATA , warn is $mem_warn ,小于(即内存剩余不足44%)，所以清理内存, " >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d_%H).log
    
    fi
    
    
    #取当前空闲cpu百份比值（只取整数部分） 
    cpu_idle=`top -b -n 1 | grep Cpu | awk '{print $5}' | cut -f 1 -d "."`
    echo "cpu_idle percent is $cpu_idle，cpu 剩余量充足，警告值是当剩余不足30%时，自动清理内" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    echo "================================================================" >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
    #设置空闲cpu的告警值为30%，如果当前cpu使用超过70%（即剩余小于30%），立即发邮件告警,自动清理内存 
    if (($cpu_idle < 30)); then
    echo " cpu 剩余不足30% ，所以清理内存, start to clear memery....." >>/usr/local/tomcat/logs/monitor/mem_auto_$(date +%Y%m%d).log
          sync
    echo 1 > /proc/sys/vm/drop_caches
    echo 2 > /proc/sys/vm/drop_caches
    echo 3 > /proc/sys/vm/drop_caches
    echo "--->cpu used more than 70% ,so start auto clear memery is OK ! $DATA , warn is $mem_warn " >>/usr/local/tomcat_treasure/logs/memery_monitor/memstat_cpu_auto_$(date +%Y%m%d_%H).log
    
    fi
    fi

[linux]: http://blog.csdn.net/u011159417/article/details/78141409