##【Spring-Boot 2.3.1】 application.properties配置详解 ##

叁歲伎倆 2024-04-17 05:29 84阅读 0赞

Spring-Boot官方开发指导文档：

2.3.1

[https://docs.spring.io/spring-boot/docs/2.3.1.RELEASE/reference/htmlsingle/\#application-properties.data.spring.datasource.hikari][https_docs.spring.io_spring-boot_docs_2.3.1.RELEASE_reference_htmlsingle_application-properties.data.spring.datasource.hikari]

**注意：最新的配置都在这里！！！！**

[https://docs.spring.io/spring-boot/docs/current-SNAPSHOT/reference/htmlsingle/][https_docs.spring.io_spring-boot_docs_current-SNAPSHOT_reference_htmlsingle]

[https://docs.spring.io/spring-boot/docs/current/reference/htmlsingle/\#common-application-properties][https_docs.spring.io_spring-boot_docs_current_reference_htmlsingle_common-application-properties]

默认创建spring-boot项目后，会在resources目录下生成一个空的application.properties配置文件，springboot启动时加载该配置文件。

application.properties(或者application.yml)中包含系统属性、环境变量、命令参数这类信息。

下面简要说一部分spring-boot项目中application.properties内的一些常用配置，更多参照官方文档。

# Spring Boot 数据库连接池 HikariCP #

## HikariCP常用属性配置 ##

如下属性都不是必须的，属于可选配置

## autoCommit ##

此属性控制从池返回的连接的默认自动提交行为。 它是一个布尔值。 默认值：true

### connectionTimeout ###

此属性控制客户端（即您）等待池中连接的最大毫秒数。 如果在没有连接可用的情况下超过此时间，则将抛出 `SQLException`。 最低可接受的连接超时为 250 毫秒。 默认值：30000（30秒）

### idleTimeout ###

此属性控制允许连接在池中空闲的最长时间。 此设置仅在 `minimumIdle` 定义为小于`maximumPoolSize` 时适用。 一旦池达到 `minimumIdle` 连接，空闲连接将不会退出。 连接是否空闲退出的最大变化为 +30 秒，平均变化为 +15 秒。 在此超时之前，连接永远不会被空闲。 值为 0 表示永远不会从池中删除空闲连接。 允许的最小值为 10000 毫秒（10秒）。 默认值：600000（10分钟）

### maxLifetime ###

此属性控制池中连接的最长生命周期。 使用中的连接永远不会退役，只有当它关闭时才会被删除。 在逐个连接的基础上，应用轻微的负衰减以避免池中的大量灭绝。 我们强烈建议设置此值，它应比任何数据库或基础结构强加的连接时间限制短几秒。 值 0 表示没有最大生命周期（无限生命周期），当然主题是 `idleTimeout` 设置。 默认值：1800000（30分钟）

### connectionTestQuery ###

如果您的驱动程序支持JDBC4，我们强烈建议您不要设置此属性。 这适用于不支持 `JDBC4 Connection.isValid（）API` 的“遗留”驱动程序。 这是在从池中给出连接之前执行的查询，以验证与数据库的连接是否仍然存在。 再次尝试运行没有此属性的池，如果您的驱动程序不符合JDBC4，HikariCP将记录错误以通知您。 默认值：无

### minimumIdle ###

此属性控制 HikariCP 尝试在池中维护的最小空闲连接数。 如果空闲连接低于此值并且池中的总连接数小于 `maximumPoolSize`，则 HikariCP 将尽最大努力快速有效地添加其他连接。 但是，为了获得最高性能和对峰值需求的响应，我们建议不要设置此值，而是允许 HikariCP 充当固定大小的连接池。 默认值：与 `maximumPoolSize` 相同

### maximumPoolSize ###

此属性控制允许池到达的最大大小，包括空闲和正在使用的连接。 基本上，此值将确定数据库后端的最大实际连接数。 对此的合理值最好由您的执行环境决定。 当池达到此大小，并且没有可用的空闲连接时，对 `getConnection()` 的调用将在超时前阻塞最多 `connectionTimeout` 毫秒。 请阅读有关游泳池尺寸的信息。 默认值：10

### metricRegistry ###

此属性仅可通过编程配置或 IoC 容器获得。 此属性允许您指定池使用的 `Codahale / Dropwizard MetricRegistry` 的实例来记录各种度量标准。 有关详细信息，请参阅度量维基页面。 默认值：无

### healthCheckRegistry ###

此属性仅可通过编程配置或IoC容器获得。 此属性允许您指定池使用的 `Codahale / Dropwizard HealthCheckRegistry` 的实例来报告当前的健康信息。 有关详细信息，请参阅运行状况检查维基页面。 默认值：无

### poolName[\#][Link 1] ###

> This property represents a user-defined name for the connection pool and appears mainly in logging and JMX management consoles to identify pools and pool configurations. Default: auto-generated

此属性表示连接池的用户定义名称，主要显示在日志记录和 JMX 管理控制台中，以标识池和池配置。 默认值：自动生成

## 配置示例[\#][Link 2] ##

Spring Boot 2.0 默认连接池就是 Hikari 了，所以引用 parents 后不用专门加依赖

*  Spring Boot 2.x 默认使用 HikariCP
 *  Spring Boot 1.x 默认使用的是 Tomcat 连接池，需要移除 `tomcat-jdbc`，配置 `spring.datasource.type=com.zaxxer.hikari.hIkari.HikariDatasource`

spring.datasource.url=jdbc:mysql://localhost:3306/beta?serverTimezone=UTC&useUnicode=true&characterEncoding=utf-8&useSSL=true
    spring.datasource.username=cicd
    spring.datasource.password=Home123*
    spring.datasource.driver-class-name=com.mysql.cj.jdbc.Driver
    
    # 可选配置
    spring.datasource.type=com.zaxxer.hikari.hIkari.HikariDatasource
    spring.datasource.hikari.minimumIdle=10
    
    # Hikari连接池的设置
    ## Hikari 时间单位都是毫秒
    spring.datasource.type=com.zaxxer.hikari.HikariDataSource
    ## 连接池名字
    spring.datasource.hikari.pool-name=MyHikariCP
    ## 最小空闲连接数量
    spring.datasource.hikari.minimum-idle=10
    ## 空闲连接存活最大时间，默认600000（10分钟）
    spring.datasource.hikari.idle-timeout=600000
    ## 连接池最大连接数，默认是10
    spring.datasource.hikari.maximum-pool-size=10
    ## 此属性控制从池返回的连接的默认自动提交行为,默认值：true
    spring.datasource.hikari.auto-commit=true
    ## 此属性控制池中连接的最长生命周期，值0表示无限生命周期，默认1800000即30分钟
    spring.datasource.hikari.max-lifetime=1800000
    ## 数据库连接超时时间,默认30秒，即30000
    spring.datasource.hikari.connection-timeout=30000

**另外：**

在Spring Boot自动化配置中，对于数据源的配置可以分为两类：

*  **通用配置：以`spring.datasource.*`的形式存在**，主要是对一些即使使用不同数据源也都需要配置的一些常规内容。比如：数据库链接地址、用户名、密码等。这里就不做过多说明了，通常就这些配置：

spring.datasource.url=jdbc:mysql://localhost:3306/test
    spring.datasource.username=root
    spring.datasource.password=123456
    spring.datasource.driver-class-name=com.mysql.jdbc.Driver

*  **数据源连接池配置：以`spring.datasource.<数据源名称>.*`的形式存在**，比如：Hikari的配置参数就是`spring.datasource.hikari.*`形式。下面这个是我们最常用的几个配置项及对应说明：

#数据源类型
    spring.datasource.type=com.zaxxer.hikari.HikariDataSource
    
    #连接池名称，默认HikariPool-1
    spring.datasource.hikari.pool-name=KevinHikariPool
    
    #最大连接数，小于等于0会被重置为默认值10；大于零小于1会被重置为minimum-idle的值
    spring.datasource.hikari.maximum-pool-size=12
    
    #连接超时时间:毫秒，小于250毫秒，否则被重置为默认值30秒
    spring.datasource.hikari.connection-timeout=60000
    
    #最小空闲连接，默认值10，小于0或大于maximum-pool-size，都会重置为maximum-pool-size
    spring.datasource.hikari.minimum-idle=10
    
    #空闲连接超时时间，默认值600000（10分钟），大于等于max-lifetime且max-lifetime>0，会被重置为0；不等于0且小于10秒，会被重置为10秒。
    # 只有空闲连接数大于最大连接数且空闲时间超过该值，才会被释放
    spring.datasource.hikari.idle-timeout=500000
    
    #连接最大存活时间.不等于0且小于30秒，会被重置为默认值30分钟.设置应该比mysql设置的超时时间短
    spring.datasource.hikari.max-lifetime=540000
    
    #连接测试查询
    spring.datasource.hikari.connection-test-query=SELECT 1
    
    
    spring.datasource.hikari.minimum-idle=10
    spring.datasource.hikari.maximum-pool-size=20
    spring.datasource.hikari.idle-timeout=500000
    spring.datasource.hikari.max-lifetime=540000
    spring.datasource.hikari.connection-timeout=60000
    spring.datasource.hikari.connection-test-query=SELECT 1

这些配置的含义：

*  `spring.datasource.hikari.minimum-idle`: 最小空闲连接，默认值10，小于0或大于maximum-pool-size，都会重置为maximum-pool-size
 *  `spring.datasource.hikari.maximum-pool-size`: 最大连接数，小于等于0会被重置为默认值10；大于零小于1会被重置为minimum-idle的值
 *  `spring.datasource.hikari.idle-timeout`: 空闲连接超时时间，默认值600000（10分钟），大于等于max-lifetime且max-lifetime>0，会被重置为0；不等于0且小于10秒，会被重置为10秒。
 *  `spring.datasource.hikari.max-lifetime`: 连接最大存活时间，不等于0且小于30秒，会被重置为默认值30分钟.设置应该比mysql设置的超时时间短
 *  `spring.datasource.hikari.connection-timeout`: 连接超时时间：毫秒，小于250毫秒，否则被重置为默认值30秒
 *  `spring.datasource.hikari.connection-test-query`: 用于测试连接是否可用的查询语句

全部配置参考：[https://docs.spring.io/spring-boot/docs/2.3.1.RELEASE/reference/htmlsingle/\#data-properties][https_docs.spring.io_spring-boot_docs_2.3.1.RELEASE_reference_htmlsingle_data-properties]

spring.datasource.hikari.allow-pool-suspension
    spring.datasource.hikari.auto-commit
    spring.datasource.hikari.catalog
    spring.datasource.hikari.connection-init-sql
    spring.datasource.hikari.connection-test-query
    spring.datasource.hikari.connection-timeout
    spring.datasource.hikari.data-source-class-name
    spring.datasource.hikari.data-source-j-n-d-i
    spring.datasource.hikari.data-source-properties
    spring.datasource.hikari.driver-class-name
    spring.datasource.hikari.exception-override-class-name
    spring.datasource.hikari.health-check-properties
    spring.datasource.hikari.health-check-registry
    spring.datasource.hikari.idle-timeout
    spring.datasource.hikari.initialization-fail-timeout
    spring.datasource.hikari.isolate-internal-queries
    spring.datasource.hikari.jdbc-url
    spring.datasource.hikari.leak-detection-threshold
    spring.datasource.hikari.login-timeout
    spring.datasource.hikari.max-lifetime
    spring.datasource.hikari.maximum-pool-size
    spring.datasource.hikari.metric-registry
    spring.datasource.hikari.metrics-tracker-factory
    spring.datasource.hikari.minimum-idle
    spring.datasource.hikari.password
    spring.datasource.hikari.pool-name
    spring.datasource.hikari.read-only
    spring.datasource.hikari.register-mbeans
    spring.datasource.hikari.scheduled-executor
    spring.datasource.hikari.schema
    spring.datasource.hikari.transaction-isolation
    spring.datasource.hikari.username
    spring.datasource.hikari.validation-timeout

# 指定自定义配置文件名称和位置 #

这些参数配置不一定要写在application.properties里面，可以在application.properties里面配置指定自定义配置文件名称和位置：（但是无论怎么配置，spring-boot都会读取加载application.properties文件）

**spring.config.name=自定义的配置文件名称**

**spring.config.location=配置文件位置（可以是classpath或者有效url)**

也可以通过在自定义类上设置@PropertySource注解指定读取某个配置文件

1. 命令行参数  
server.address=xxx.xxx.xx.xxx  //服务器绑定ip地址，多网卡时可以指定

server.port=xxx

//可以指定springboot内嵌容器启动的端口，默认使用tomcat容器时在8080端口，右键run- java application/springboot..，可以支持不同的容器，在引入不同的依赖时。当server.port=0时，表示自动扫面获取一个可用的端口。

ssl的安全访问配置

server.port=8443  
server.ssl.key-store=classpath:keystore.jks  
server.ssl.key-store-password=secret  
server.ssl.key-password=another-secret  
目前spring-boot不支持http和https同时启用的情况，只支持使用其中一个，如果需要同时使用，可以使用其他形式的实现方式。

该部分对应org.springframework.boot.autoconfigure.webServerProperties类。

此外还有一些不是很常用的如：

server.http2.enable=true/false

//该属性可以支持http2的协议类型，目前只支持tomcat和undertow的容器并且需要JDK1.8+.

官文上对于内嵌tomcat的配置参数也有很多，还可以编码来实现很多tomcat中的功能，不多说了，内容多，需要的看一下官网。

2. 系统属性/变量  
开发/测试/生产环境配置  
spring.profiles.active=xxxx

//该系统变量可以指明要使用的配置文件，一般应用于多环境配置分离，如生产环境（production),开发环境(development）,测试环境(test）等，可以自定义，如开发环境配置文件为application-dev.properties，则spring.profiles.active=dev，在启动时会加载application-dev.properties配置文件。

关于Banner  
项目启动时会打印一大坨符号组成的东西，看了好久感觉好像是打印的Spring这几个字母。

SpringBoot里叫banner配置。

banner.location=xxx.txt //可以自定义输出信息的位置

banner.charset=utf-8 //指定编码格式

spring.main.banner-mode=console/off    //banner图开启或者打印模式

Mysql数据源配置(引入spring-boot-starter-jdbc自动集成)  
注解使用jdbcTemplate或者集成Mybatis(引入maven:mybatis-spring-boot-starter )

spring.datasource.driver-class-name=com.mysql.jdbc.Driver  
spring.datasource.url=jdbc:mysql://localhost:3306/company?allowMultiQueries=true  
spring.datasource.username=root  
spring.datasource.password=xxxx

该部分配置为spring数据源的配置，使用jdbcTemplate进行数据库操作(使用jdbcTempate，会自动提示导入spring-boot-starter-jdbc等依赖)。在使用单元测试时，同时运行多个可能会出现数据源冲突，此时可以通过下面的属性生成唯一的数据源名称

spring.datasource.generate-unique-name=true

spring.datasource.\*  的属性集配置对应org.springframework.boot.autoconfigure.jdbcDataSourceProperties类。

MongoDB数据源配置(引入spring-boot-starter-data-mongodb自动集成)  
spring.data.mongodb.\*对应的属性类为MongoProperties.java

常用基本属性：

spring.data.mongodb.host=xxx //默认localhost

spring.data.mongodb.port=xxx //默认27017

spring.data.mongodb.database=xx //数据库

spring.data.mongodb.username=xx //数据库用户名

spring.data.mongodb.password=xx //数据库用户密码

上述参数还可以用一个代替：（上述参数不可与该参数同时使用）

spring.data.mongodb.uri=mongodb://localhost:27017/test

如果有密码：

mongodb://username:password@localhost:27017/dbname

Redis配置(引入spring-boot-starter-data-redis自动集成)  
\#spring.redis.url=  
\#上面url形式等同下面  
\#host和port默认值取值localhost，6379  
spring.redis.host=localhost  
spring.redis.port=6379

\#链接池配置，下面是默认值

spring.pool.max-idle=8

spring.pool.min-idel=0

spring.pool.max-wait=-1 //-1禁用该属性，等待单位milliseconds

spring.pool.max-active=8

\#密码，无密码时不需要  
\#spring.redis.password=  
\#spring.redis.ssl=true/false

对应类org.springframework.boot.autoconfigure.data.redis.RedisProperties.java类

MyBatis配置(引入mybatis-spring-boot-starter自动集成)  
如果不适用xml映射文件配置，下面的不需要，直接使用注解可以实现

\#本例子中放在resources/mybatis/mybatis-config.xml中

mybatis.config-location=classpath:mybatis/mybatis-config.xml

mybatis.mapper-locaitons=classpath:mybatis/mappings/\*.xml

\#下面的配置可以在mybatis-config.xml中配置

\#mybatis.configuration.\*=xxx  
\#别名实体包，多个逗号隔开  
\#mybatis.type-aliases-package=com.tom.bean  
\#类型转换器包，多个逗号隔开  
\#mybatis.type-handlers-package=com.tom.mybatis.handlers  
\#执行类型  
\#mybatis.executor-type=SIMPLE/REUSE/BATCH

\#mybatis  
\#entity扫描的包名  
mybatis.type-aliases-package=com.cqfae.boot.mina.domain.entity  
\#Mapper.xml所在的位置  
mybatis.mapper-locations=classpath\*:/mybaits/mapper/\*.xml  
\#mybatis扩展配置 @see https://blog.csdn.net/lovebosom/article/details/52584562  
mybatis.configuration.cache-enabled=false  
mybatis.configuration.lazy-loading-enabled=true  
mybatis.configuration.aggressive-lazy-loading=true  
mybatis.configuration.multiple-result-sets-enabled=true  
mybatis.configuration.use-column-label=true  
mybatis.configuration.use-generated-keys=false  
mybatis.configuration.auto-mapping-behavior=FULL  
mybatis.configuration.default-executor-type=REUSE  
mybatis.configuration.default-statement-timeout=25  
mybatis.configuration.safe-row-bounds-enabled=false  
mybatis.configuration.map-underscore-to-camel-case=true  
mybatis.configuration.local-cache-scope=SESSION  
mybatis.configuration.jdbc-type-for-null=OTHER  
mybatis.configuration.lazy-load-trigger-methods=equals,clone,hashCode,toString

cache配置(引入spring-boot-starter-cache自动集成)  
对于缓存自动集成，spring-boot也提供了很多方案，这里说一下默认的spring-cache、ehcache、redis-cache的相关属性配置

spring.cache.type=cache/ehcache/redis....(参照CacheType类) //用于指明要使用的缓存类型

ehcache专用：

spring.cache.ehcache.config=classpath:cache/ehcache.xml //用于配置使用ehcache时配置文件所在位置

在使用默认的cache时（默认cache是采用concurrentMap实现的缓存,前提是没有引入spring-boot-starter-data-redis等其他缓存依赖)或者使用redis时，可以使用下面参数配置

spring.cache.cache-names=xxx,xxx,xxx   //配置缓存名称

redis专用：

spring.cache.redis.time-to-live=600000    //缓存有效时间，单位毫秒

spring.cache.\*对应类为：org.springframework.boot.autoconfigure.cache.cacheProperties.java

完成上面的设置就可以在项目中使用spring注解，但是要使用@EnableCaching启用注解，具体cache使用详见下面的章节。

文件上传配置  
\#默认true

\#spring.http.mutipart.enabled=true

\#上传中转文件位置,  
\#spring.http.multipart.location=  
\#最大上传文件大小，默认1MB  
spring.http.multipart.max-file-size=5MB  
\#最大请求大小,默认10MB  
spring.http.multipart.max-request-size=20MB

对应类：org.springframework.boot.autoconfigure.web.MultipartProperties

(注意：在实际类中出现驼峰表示的变量，配置属性单词间用-分割)

**SpringBoot 2.6**官网基本属性集合：  **最近配置参考最上面官方链接！！！**  
\# ===================================================================  
\# COMMON SPRING BOOT PROPERTIES  
\#  
\# This sample file is provided as a guideline. Do NOT copy it in its  
\# entirety to your own application.               ^^^  
\# ===================================================================  
\# ----------------------------------------  
\# CORE PROPERTIES  
\# ----------------------------------------  
   
\# BANNER  
banner.charset=UTF-8 \# Banner file encoding.  
banner.location=classpath:banner.txt \# Banner file location.  
banner.image.location=classpath:banner.gif \# Banner image file location (jpg/png can also be used).  
banner.image.width= \# Width of the banner image in chars (default 76)  
banner.image.height= \# Height of the banner image in chars (default based on image height)  
banner.image.margin= \# Left hand image margin in chars (default 2)  
banner.image.invert= \# If images should be inverted for dark terminal themes (default false)  
   
\# LOGGING  
logging.config= \# Location of the logging configuration file. For instance \`classpath:logback.xml\` for Logback  
logging.exception-conversion-word=%wEx \# Conversion word used when logging exceptions.  
logging.file= \# Log file name. For instance \`myapp.log\`  
logging.file.max-history= \# Maximum of archive log files to keep. Only supported with the default logback setup.  
logging.file.max-size= \# Maximum log file size. Only supported with the default logback setup.  
logging.level.\*= \# Log levels severity mapping. For instance \`logging.level.org.springframework=DEBUG\`  
logging.path= \# Location of the log file. For instance \`/var/log\`  
logging.pattern.console= \# Appender pattern for output to the console. Only supported with the default logback setup.  
logging.pattern.file= \# Appender pattern for output to the file. Only supported with the default logback setup.  
logging.pattern.level= \# Appender pattern for log level (default %5p). Only supported with the default logback setup.  
logging.pattern.dateformat= \# Appender pattern for log dateformat (default yyyy-MM-dd HH:mm:ss.SSS). Only supported with the default logback setup.  
logging.register-shutdown-hook=false \# Register a shutdown hook for the logging system when it is initialized.  
   
\# AOP  
spring.aop.auto=true \# Add @EnableAspectJAutoProxy.  
spring.aop.proxy-target-class=true \# Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false).  
   
\# IDENTITY (ContextIdApplicationContextInitializer)  
spring.application.index= \# Application index.  
spring.application.name= \# Application name.  
   
\# ADMIN (SpringApplicationAdminJmxAutoConfiguration)  
spring.application.admin.enabled=false \# Enable admin features for the application.  
spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication \# JMX name of the application admin MBean.  
   
\# AUTO-CONFIGURATION  
spring.autoconfigure.exclude= \# Auto-configuration classes to exclude.  
   
\# SPRING CORE  
spring.beaninfo.ignore=true \# Skip search of BeanInfo classes.  
   
\# SPRING CACHE (CacheProperties)  
spring.cache.cache-names= \# Comma-separated list of cache names to create if supported by the underlying cache manager.  
spring.cache.caffeine.spec= \# The spec to use to create caches. Check CaffeineSpec for more details on the spec format.  
spring.cache.couchbase.expiration=0 \# Entry expiration in milliseconds. By default the entries never expire.  
spring.cache.ehcache.config= \# The location of the configuration file to use to initialize EhCache.  
spring.cache.infinispan.config= \# The location of the configuration file to use to initialize Infinispan.  
spring.cache.jcache.config= \# The location of the configuration file to use to initialize the cache manager.  
spring.cache.jcache.provider= \# Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath.  
spring.cache.redis.cache-null-values=true \# Allow caching null values.  
spring.cache.redis.key-prefix= \# Key prefix.  
spring.cache.redis.time-to-live=0 \# Entry expiration in milliseconds. By default the entries never expire.  
spring.cache.redis.use-key-prefix=true \# Whether to use the key prefix when writing to Redis.  
spring.cache.type= \# Cache type, auto-detected according to the environment by default.  
   
\# SPRING CONFIG - using environment property only (ConfigFileApplicationListener)  
spring.config.location= \# Config file locations.  
spring.config.name=application \# Config file name.  
   
\# HAZELCAST (HazelcastProperties)  
spring.hazelcast.config= \# The location of the configuration file to use to initialize Hazelcast.  
   
\# PROJECT INFORMATION (ProjectInfoProperties)  
spring.info.build.location=classpath:META-INF/build-info.properties \# Location of the generated build-info.properties file.  
spring.info.git.location=classpath:git.properties \# Location of the generated git.properties file.  
   
\# JMX  
spring.jmx.default-domain= \# JMX domain name.  
spring.jmx.enabled=true \# Expose management beans to the JMX domain.  
spring.jmx.server=mbeanServer \# MBeanServer bean name.  
   
\# Email (MailProperties)  
spring.mail.default-encoding=UTF-8 \# Default MimeMessage encoding.  
spring.mail.host= \# SMTP server host. For instance \`smtp.example.com\`  
spring.mail.jndi-name= \# Session JNDI name. When set, takes precedence to others mail settings.  
spring.mail.password= \# Login password of the SMTP server.  
spring.mail.port= \# SMTP server port.  
spring.mail.properties.\*= \# Additional JavaMail session properties.  
spring.mail.protocol=smtp \# Protocol used by the SMTP server.  
spring.mail.test-connection=false \# Test that the mail server is available on startup.  
spring.mail.username= \# Login user of the SMTP server.  
   
\# APPLICATION SETTINGS (SpringApplication)  
spring.main.banner-mode=console \# Mode used to display the banner when the application runs.  
spring.main.sources= \# Sources (class name, package name or XML resource location) to include in the ApplicationContext.  
spring.main.web-application-type= \# Flag to explicitly request a specific type of web application. Auto-detected based on the classpath if not set.  
   
\# FILE ENCODING (FileEncodingApplicationListener)  
spring.mandatory-file-encoding= \# Expected character encoding the application must use.  
   
\# INTERNATIONALIZATION (MessageSourceAutoConfiguration)  
spring.messages.always-use-message-format=false \# Set whether to always apply the MessageFormat rules, parsing even messages without arguments.  
spring.messages.basename=messages \# Comma-separated list of basenames, each following the ResourceBundle convention.  
spring.messages.cache-seconds=-1 \# Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever.  
spring.messages.encoding=UTF-8 \# Message bundles encoding.  
spring.messages.fallback-to-system-locale=true \# Set whether to fall back to the system Locale if no files for a specific Locale have been found.  
spring.messages.use-code-as-default-message=false \# Set whether to use the message code as default message instead of throwing a "NoSuchMessageException". Recommended during development only.  
   
\# OUTPUT  
spring.output.ansi.enabled=detect \# Configure the ANSI output.  
   
\# PID FILE (ApplicationPidFileWriter)  
spring.pid.fail-on-write-error= \# Fail if ApplicationPidFileWriter is used but it cannot write the PID file.  
spring.pid.file= \# Location of the PID file to write (if ApplicationPidFileWriter is used).  
   
\# PROFILES  
spring.profiles.active= \# Comma-separated list (or list if using YAML) of active profiles.  
spring.profiles.include= \# Unconditionally activate the specified comma separated profiles (or list of profiles if using YAML).  
   
\# QUARTZ SCHEDULER (QuartzProperties)  
spring.quartz.job-store-type=memory \# Quartz job store type.  
spring.quartz.properties.\*= \# Additional Quartz Scheduler properties.  
spring.quartz.jdbc.initialize-schema=embedded \# Database schema initialization mode.  
spring.quartz.jdbc.schema=classpath:org/quartz/impl/jdbcjobstore/tables\_@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
   
\# Reactor  
spring.reactor.stacktrace-mode.enabled=false \# Set whether Reactor should collect stacktrace information at runtime.  
   
\# SENDGRID (SendGridAutoConfiguration)  
spring.sendgrid.api-key= \# SendGrid API key.  
spring.sendgrid.proxy.host= \# SendGrid proxy host.  
spring.sendgrid.proxy.port= \# SendGrid proxy port.  
   
   
\# ----------------------------------------  
\# WEB PROPERTIES  
\# ----------------------------------------  
   
\# EMBEDDED SERVER CONFIGURATION (ServerProperties)  
server.address= \# Network address to which the server should bind to.  
server.compression.enabled=false \# If response compression is enabled.  
server.compression.excluded-user-agents= \# List of user-agents to exclude from compression.  
server.compression.mime-types=text/html,text/xml,text/plain,text/css,text/javascript,application/javascript \# Comma-separated list of MIME types that should be compressed.  
server.compression.min-response-size=2048 \# Minimum response size that is required for compression to be performed.  
server.connection-timeout= \# Time in milliseconds that connectors will wait for another HTTP request before closing the connection. When not set, the connector's container-specific default will be used. Use a value of -1 to indicate no (i.e. infinite) timeout.  
server.display-name=application \# Display name of the application.  
server.max-http-header-size=0 \# Maximum size in bytes of the HTTP message header.  
server.error.include-exception=false \# Include the "exception" attribute.  
server.error.include-stacktrace=never \# When to include a "stacktrace" attribute.  
server.error.path=/error \# Path of the error controller.  
server.error.whitelabel.enabled=true \# Enable the default error page displayed in browsers in case of a server error.  
server.http2.enabled=true \# Whether to enable HTTP/2 support, if the current environment supports it.  
server.jetty.acceptors= \# Number of acceptor threads to use.  
server.jetty.accesslog.append=false \# Append to log.  
server.jetty.accesslog.date-format=dd/MMM/yyyy:HH:mm:ss Z \# Timestamp format of the request log.  
server.jetty.accesslog.enabled=false \# Enable access log.  
server.jetty.accesslog.extended-format=false \# Enable extended NCSA format.  
server.jetty.accesslog.file-date-format= \# Date format to place in log file name.  
server.jetty.accesslog.filename= \# Log filename. If not specified, logs will be redirected to "System.err".  
server.jetty.accesslog.locale= \# Locale of the request log.  
server.jetty.accesslog.log-cookies=false \# Enable logging of the request cookies.  
server.jetty.accesslog.log-latency=false \# Enable logging of request processing time.  
server.jetty.accesslog.log-server=false \# Enable logging of the request hostname.  
server.jetty.accesslog.retention-period=31 \# Number of days before rotated log files are deleted.  
server.jetty.accesslog.time-zone=GMT \# Timezone of the request log.  
server.jetty.max-http-post-size=0 \# Maximum size in bytes of the HTTP post or put content.  
server.jetty.selectors= \# Number of selector threads to use.  
server.port=8080 \# Server HTTP port.  
server.server-header= \# Value to use for the Server response header (no header is sent if empty)  
server.use-forward-headers= \# If X-Forwarded-\* headers should be applied to the HttpRequest.  
server.servlet.context-parameters.\*= \# Servlet context init parameters  
   server.servlet.context-path= \# Context path of the application.  
   server.servlet.jsp.class-name=org.apache.jasper.servlet.JspServlet \# The class name of the JSP servlet.  
server.servlet.jsp.init-parameters.\*= \# Init parameters used to configure the JSP servlet  
server.servlet.jsp.registered=true \# Whether or not the JSP servlet is registered  
   server.servlet.path=/ \# Path of the main dispatcher servlet.  
server.session.cookie.comment= \# Comment for the session cookie.  
server.session.cookie.domain= \# Domain for the session cookie.  
server.session.cookie.http-only= \# "HttpOnly" flag for the session cookie.  
server.session.cookie.max-age= \# Maximum age of the session cookie in seconds.  
server.session.cookie.name= \# Session cookie name.  
server.session.cookie.path= \# Path of the session cookie.  
server.session.cookie.secure= \# "Secure" flag for the session cookie.  
server.session.persistent=false \# Persist session data between restarts.  
server.session.store-dir= \# Directory used to store session data.  
server.session.timeout= \# Session timeout in seconds.  
server.session.tracking-modes= \# Session tracking modes (one or more of the following: "cookie", "url", "ssl").  
server.ssl.ciphers= \# Supported SSL ciphers.  
server.ssl.client-auth= \# Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store.  
server.ssl.enabled= \# Enable SSL support.  
server.ssl.enabled-protocols= \# Enabled SSL protocols.  
server.ssl.key-alias= \# Alias that identifies the key in the key store.  
server.ssl.key-password= \# Password used to access the key in the key store.  
server.ssl.key-store= \# Path to the key store that holds the SSL certificate (typically a jks file).  
server.ssl.key-store-password= \# Password used to access the key store.  
server.ssl.key-store-provider= \# Provider for the key store.  
server.ssl.key-store-type= \# Type of the key store.  
server.ssl.protocol=TLS \# SSL protocol to use.  
server.ssl.trust-store= \# Trust store that holds SSL certificates.  
server.ssl.trust-store-password= \# Password used to access the trust store.  
server.ssl.trust-store-provider= \# Provider for the trust store.  
server.ssl.trust-store-type= \# Type of the trust store.  
server.tomcat.accept-count= \# Maximum queue length for incoming connection requests when all possible request processing threads are in use.  
server.tomcat.accesslog.buffered=true \# Buffer output such that it is only flushed periodically.  
server.tomcat.accesslog.directory=logs \# Directory in which log files are created. Can be relative to the tomcat base dir or absolute.  
server.tomcat.accesslog.enabled=false \# Enable access log.  
server.tomcat.accesslog.file-date-format=.yyyy-MM-dd \# Date format to place in log file name.  
server.tomcat.accesslog.pattern=common \# Format pattern for access logs.  
server.tomcat.accesslog.prefix=access\_log \# Log file name prefix.  
server.tomcat.accesslog.rename-on-rotate=false \# Defer inclusion of the date stamp in the file name until rotate time.  
server.tomcat.accesslog.request-attributes-enabled=false \# Set request attributes for IP address, Hostname, protocol and port used for the request.  
server.tomcat.accesslog.rotate=true \# Enable access log rotation.  
server.tomcat.accesslog.suffix=.log \# Log file name suffix.  
server.tomcat.additional-tld-skip-patterns= \# Comma-separated list of additional patterns that match jars to ignore for TLD scanning.  
server.tomcat.background-processor-delay=30 \# Delay in seconds between the invocation of backgroundProcess methods.  
server.tomcat.basedir= \# Tomcat base directory. If not specified a temporary directory will be used.  
server.tomcat.internal-proxies=10\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        192\\\\.168\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        169\\\\.254\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        127\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.1\[6-9\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.2\[0-9\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.3\[0-1\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\} \# regular expression matching trusted IP addresses.  
server.tomcat.max-connections= \# Maximum number of connections that the server will accept and process at any given time.  
server.tomcat.max-http-header-size=0 \# Maximum size in bytes of the HTTP message header.  
server.tomcat.max-http-post-size=0 \# Maximum size in bytes of the HTTP post content.  
server.tomcat.max-threads=0 \# Maximum amount of worker threads.  
server.tomcat.min-spare-threads=0 \# Minimum amount of worker threads.  
server.tomcat.port-header=X-Forwarded-Port \# Name of the HTTP header used to override the original port value.  
server.tomcat.protocol-header= \# Header that holds the incoming protocol, usually named "X-Forwarded-Proto".  
server.tomcat.protocol-header-https-value=https \# Value of the protocol header that indicates that the incoming request uses SSL.  
server.tomcat.redirect-context-root= \# Whether requests to the context root should be redirected by appending a / to the path.  
server.tomcat.remote-ip-header= \# Name of the http header from which the remote ip is extracted. For instance \`X-FORWARDED-FOR\`  
spring.tomcat.resource.cache-ttl=5000 \# Time-to-live in milliseconds of the static resource cache.  
server.tomcat.uri-encoding=UTF-8 \# Character encoding to use to decode the URI.  
server.undertow.accesslog.dir= \# Undertow access log directory.  
server.undertow.accesslog.enabled=false \# Enable access log.  
server.undertow.accesslog.pattern=common \# Format pattern for access logs.  
server.undertow.accesslog.prefix=access\_log. \# Log file name prefix.  
server.undertow.accesslog.rotate=true \# Enable access log rotation.  
server.undertow.accesslog.suffix=log \# Log file name suffix.  
server.undertow.buffer-size= \# Size of each buffer in bytes.  
server.undertow.direct-buffers= \# Allocate buffers outside the Java heap.  
server.undertow.io-threads= \# Number of I/O threads to create for the worker.  
server.undertow.eager-filter-init=true \# Whether servlet filters should be initialized on startup.  
server.undertow.max-http-post-size=0 \# Maximum size in bytes of the HTTP post content.  
server.undertow.worker-threads= \# Number of worker threads.  
   
\# FREEMARKER (FreeMarkerAutoConfiguration)  
spring.freemarker.allow-request-override=false \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.freemarker.allow-session-override=false \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.freemarker.cache=false \# Enable template caching.  
spring.freemarker.charset=UTF-8 \# Template encoding.  
spring.freemarker.check-template-location=true \# Check that the templates location exists.  
spring.freemarker.content-type=text/html \# Content-Type value.  
spring.freemarker.enabled=true \# Enable MVC view resolution for this technology.  
spring.freemarker.expose-request-attributes=false \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.freemarker.expose-session-attributes=false \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.freemarker.expose-spring-macro-helpers=true \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.freemarker.prefer-file-system-access=true \# Prefer file system access for template loading. File system access enables hot detection of template changes.  
spring.freemarker.prefix= \# Prefix that gets prepended to view names when building a URL.  
spring.freemarker.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.freemarker.settings.\*= \# Well-known FreeMarker keys which will be passed to FreeMarker's Configuration.  
spring.freemarker.suffix=.ftl \# Suffix that gets appended to view names when building a URL.  
spring.freemarker.template-loader-path=classpath:/templates/ \# Comma-separated list of template paths.  
spring.freemarker.view-names= \# White list of view names that can be resolved.  
   
\# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration)  
spring.groovy.template.allow-request-override=false \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.groovy.template.allow-session-override=false \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.groovy.template.cache= \# Enable template caching.  
spring.groovy.template.charset=UTF-8 \# Template encoding.  
spring.groovy.template.check-template-location=true \# Check that the templates location exists.  
spring.groovy.template.configuration.\*= \# See GroovyMarkupConfigurer  
spring.groovy.template.content-type=test/html \# Content-Type value.  
spring.groovy.template.enabled=true \# Enable MVC view resolution for this technology.  
spring.groovy.template.expose-request-attributes=false \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.groovy.template.expose-session-attributes=false \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.groovy.template.expose-spring-macro-helpers=true \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.groovy.template.prefix= \# Prefix that gets prepended to view names when building a URL.  
spring.groovy.template.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.groovy.template.resource-loader-path=classpath:/templates/ \# Template path.  
spring.groovy.template.suffix=.tpl \# Suffix that gets appended to view names when building a URL.  
spring.groovy.template.view-names= \# White list of view names that can be resolved.  
   
\# SPRING HATEOAS (HateoasProperties)  
spring.hateoas.use-hal-as-default-json-media-type=true \# Specify if application/hal+json responses should be sent to requests that accept application/json.  
   
\# HTTP message conversion  
spring.http.converters.preferred-json-mapper= \# Preferred JSON mapper to use for HTTP message conversion, auto-detected according to the environment by default.  
   
\# HTTP encoding (HttpEncodingProperties)  
spring.http.encoding.charset=UTF-8 \# Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.  
spring.http.encoding.enabled=true \# Enable http encoding support.  
spring.http.encoding.force= \# Force the encoding to the configured charset on HTTP requests and responses.  
spring.http.encoding.force-request= \# Force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.  
spring.http.encoding.force-response= \# Force the encoding to the configured charset on HTTP responses.  
spring.http.encoding.mapping= \# Locale to Encoding mapping.  
   
\# MULTIPART (MultipartProperties)  
spring.servlet.multipart.enabled=true \# Enable support of multipart uploads.  
spring.servlet.multipart.file-size-threshold=0 \# Threshold after which files will be written to disk. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes respectively.  
spring.servlet.multipart.location= \# Intermediate location of uploaded files.  
spring.servlet.multipart.max-file-size=1MB \# Max file size. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes respectively.  
spring.servlet.multipart.max-request-size=10MB \# Max request size. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes respectively.  
spring.servlet.multipart.resolve-lazily=false \# Whether to resolve the multipart request lazily at the time of file or parameter access.  
   
\# JACKSON (JacksonProperties)  
spring.jackson.date-format= \# Date format string or a fully-qualified date format class name. For instance \`yyyy-MM-dd HH:mm:ss\`.  
spring.jackson.default-property-inclusion= \# Controls the inclusion of properties during serialization.  
spring.jackson.deserialization.\*= \# Jackson on/off features that affect the way Java objects are deserialized.  
spring.jackson.generator.\*= \# Jackson on/off features for generators.  
spring.jackson.joda-date-time-format= \# Joda date time format string. If not configured, "date-format" will be used as a fallback if it is configured with a format string.  
spring.jackson.locale= \# Locale used for formatting.  
spring.jackson.mapper.\*= \# Jackson general purpose on/off features.  
spring.jackson.parser.\*= \# Jackson on/off features for parsers.  
spring.jackson.property-naming-strategy= \# One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.  
spring.jackson.serialization.\*= \# Jackson on/off features that affect the way Java objects are serialized.  
spring.jackson.time-zone= \# Time zone used when formatting dates. For instance \`America/Los\_Angeles\`  
   
\# JERSEY (JerseyProperties)  
spring.jersey.application-path= \# Path that serves as the base URI for the application. Overrides the value of "@ApplicationPath" if specified.  
spring.jersey.filter.order=0 \# Jersey filter chain order.  
spring.jersey.init.\*= \# Init parameters to pass to Jersey via the servlet or filter.  
spring.jersey.servlet.load-on-startup=-1 \# Load on startup priority of the Jersey servlet.  
spring.jersey.type=servlet \# Jersey integration type.  
   
   \# SPRING LDAP (LdapProperties)  
   spring.ldap.urls= \# LDAP URLs of the server.  
   spring.ldap.base= \# Base suffix from which all operations should originate.  
   spring.ldap.username= \# Login user of the server.  
   spring.ldap.password= \# Login password of the server.  
   spring.ldap.base-environment.\*= \# LDAP specification settings.  
   
   \# EMBEDDED LDAP (EmbeddedLdapProperties)  
   spring.ldap.embedded.base-dn= \# The base DN  
   spring.ldap.embedded.credential.username= \# Embedded LDAP username.  
   spring.ldap.embedded.credential.password= \# Embedded LDAP password.  
   spring.ldap.embedded.ldif=classpath:schema.ldif \# Schema (LDIF) script resource reference.  
   spring.ldap.embedded.port= \# Embedded LDAP port.  
   spring.ldap.embedded.validation.enabled=true \# Enable LDAP schema validation.  
   spring.ldap.embedded.validation.schema= \# Path to the custom schema.  
   
\# MUSTACHE TEMPLATES (MustacheAutoConfiguration)  
spring.mustache.allow-request-override= \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.mustache.allow-session-override= \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.mustache.cache= \# Enable template caching.  
spring.mustache.charset= \# Template encoding.  
spring.mustache.check-template-location= \# Check that the templates location exists.  
spring.mustache.content-type= \# Content-Type value.  
spring.mustache.enabled= \# Enable MVC view resolution for this technology.  
spring.mustache.expose-request-attributes= \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.mustache.expose-session-attributes= \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.mustache.expose-spring-macro-helpers= \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.mustache.prefix=classpath:/templates/ \# Prefix to apply to template names.  
spring.mustache.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.mustache.suffix=.mustache \# Suffix to apply to template names.  
spring.mustache.view-names= \# White list of view names that can be resolved.  
   
\# SPRING MVC (WebMvcProperties)  
spring.mvc.async.request-timeout= \# Amount of time (in milliseconds) before asynchronous request handling times out.  
spring.mvc.date-format= \# Date format to use. For instance \`dd/MM/yyyy\`.  
spring.mvc.dispatch-trace-request=false \# Dispatch TRACE requests to the FrameworkServlet doService method.  
spring.mvc.dispatch-options-request=true \# Dispatch OPTIONS requests to the FrameworkServlet doService method.  
spring.mvc.favicon.enabled=true \# Enable resolution of favicon.ico.  
spring.mvc.formcontent.putfilter.enabled=true \# Enable Spring's HttpPutFormContentFilter.  
spring.mvc.ignore-default-model-on-redirect=true \# If the content of the "default" model should be ignored during redirect scenarios.  
spring.mvc.locale= \# Locale to use. By default, this locale is overridden by the "Accept-Language" header.  
spring.mvc.locale-resolver=accept-header \# Define how the locale should be resolved.  
spring.mvc.log-resolved-exception=false \# Enable warn logging of exceptions resolved by a "HandlerExceptionResolver".  
spring.mvc.media-types.\*= \# Maps file extensions to media types for content negotiation.  
spring.mvc.message-codes-resolver-format= \# Formatting strategy for message codes. For instance \`PREFIX\_ERROR\_CODE\`.  
spring.mvc.servlet.load-on-startup=-1 \# Load on startup priority of the Spring Web Services servlet.  
spring.mvc.static-path-pattern=/\*\* \# Path pattern used for static resources.  
spring.mvc.throw-exception-if-no-handler-found=false \# If a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.  
spring.mvc.view.prefix= \# Spring MVC view prefix.  
spring.mvc.view.suffix= \# Spring MVC view suffix.  
   
\# SPRING RESOURCES HANDLING (ResourceProperties)  
spring.resources.add-mappings=true \# Enable default resource handling.  
spring.resources.cache-period= \# Cache period for the resources served by the resource handler, in seconds.  
spring.resources.chain.cache=true \# Enable caching in the Resource chain.  
spring.resources.chain.enabled= \# Enable the Spring Resource Handling chain. Disabled by default unless at least one strategy has been enabled.  
spring.resources.chain.gzipped=false \# Enable resolution of already gzipped resources.  
spring.resources.chain.html-application-cache=false \# Enable HTML5 application cache manifest rewriting.  
spring.resources.chain.strategy.content.enabled=false \# Enable the content Version Strategy.  
spring.resources.chain.strategy.content.paths=/\*\* \# Comma-separated list of patterns to apply to the Version Strategy.  
spring.resources.chain.strategy.fixed.enabled=false \# Enable the fixed Version Strategy.  
spring.resources.chain.strategy.fixed.paths=/\*\* \# Comma-separated list of patterns to apply to the Version Strategy.  
spring.resources.chain.strategy.fixed.version= \# Version string to use for the Version Strategy.  
spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ \# Locations of static resources.  
   
\# SPRING SESSION (SessionProperties)  
spring.session.store-type= \# Session store type.  
spring.session.servlet.filter-order=-2147483598 \# Session repository filter order.  
spring.session.servlet.filter-dispatcher-types=ASYNC,ERROR,REQUEST \# Session repository filter dispatcher types.  
   
\# SPRING SESSION HAZELCAST (HazelcastSessionProperties)  
spring.session.hazelcast.flush-mode=on-save \# Sessions flush mode.  
spring.session.hazelcast.map-name=spring:session:sessions \# Name of the map used to store sessions.  
   
\# SPRING SESSION JDBC (JdbcSessionProperties)  
spring.session.jdbc.cleanup-cron=0 \* \* \* \* \* \# Cron expression for expired session cleanup job.  
spring.session.jdbc.initialize-schema=embedded \# Database schema initialization mode.  
spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
spring.session.jdbc.table-name=SPRING\_SESSION \# Name of database table used to store sessions.  
   
\# SPRING SESSION MONGODB (MongoSessionProperties)  
spring.session.mongodb.collection-name=sessions \# Collection name used to store sessions.  
   
\# SPRING SESSION REDIS (RedisSessionProperties)  
spring.session.redis.cleanup-cron=0 \* \* \* \* \* \# Cron expression for expired session cleanup job.  
spring.session.redis.flush-mode=on-save \# Sessions flush mode.  
spring.session.redis.namespace= \# Namespace for keys used to store sessions.  
   
\# SPRING SOCIAL (SocialWebAutoConfiguration)  
spring.social.auto-connection-views=false \# Enable the connection status view for supported providers.  
   
\# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration)  
spring.social.facebook.app-id= \# your application's Facebook App ID  
spring.social.facebook.app-secret= \# your application's Facebook App Secret  
   
\# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration)  
spring.social.linkedin.app-id= \# your application's LinkedIn App ID  
spring.social.linkedin.app-secret= \# your application's LinkedIn App Secret  
   
\# SPRING SOCIAL TWITTER (TwitterAutoConfiguration)  
spring.social.twitter.app-id= \# your application's Twitter App ID  
spring.social.twitter.app-secret= \# your application's Twitter App Secret  
   
\# THYMELEAF (ThymeleafAutoConfiguration)  
spring.thymeleaf.cache=true \# Enable template caching.  
spring.thymeleaf.check-template=true \# Check that the template exists before rendering it.  
spring.thymeleaf.check-template-location=true \# Check that the templates location exists.  
spring.thymeleaf.enabled=true \# Enable Thymeleaf view resolution for Web frameworks.  
spring.thymeleaf.encoding=UTF-8 \# Template files encoding.  
spring.thymeleaf.excluded-view-names= \# Comma-separated list of view names that should be excluded from resolution.  
spring.thymeleaf.mode=HTML5 \# Template mode to be applied to templates. See also StandardTemplateModeHandlers.  
spring.thymeleaf.prefix=classpath:/templates/ \# Prefix that gets prepended to view names when building a URL.  
spring.thymeleaf.reactive.max-chunk-size= \# Maximum size of data buffers used for writing to the response, in bytes.  
spring.thymeleaf.reactive.media-types= \# Media types supported by the view technology.  
spring.thymeleaf.servlet.content-type=text/html \# Content-Type value written to HTTP responses.  
spring.thymeleaf.suffix=.html \# Suffix that gets appended to view names when building a URL.  
spring.thymeleaf.template-resolver-order= \# Order of the template resolver in the chain.  
spring.thymeleaf.view-names= \# Comma-separated list of view names that can be resolved.  
   
\# SPRING WEB FLUX (WebFluxProperties)  
spring.webflux.static-path-pattern=/\*\* \# Path pattern used for static resources.  
   
\# SPRING WEB SERVICES (WebServicesProperties)  
spring.webservices.path=/services \# Path that serves as the base URI for the services.  
spring.webservices.servlet.init= \# Servlet init parameters to pass to Spring Web Services.  
spring.webservices.servlet.load-on-startup=-1 \# Load on startup priority of the Spring Web Services servlet.  
spring.webservices.wsdl-locations= \# Comma-separated list of locations of WSDLs and accompanying XSDs to be exposed as beans.  
   
   
   
\# ----------------------------------------  
\# SECURITY PROPERTIES  
\# ----------------------------------------  
\# SECURITY (SecurityProperties)  
spring.security.filter.order=0 \# Security filter chain order.  
spring.security.filter.dispatcher-types=ASYNC,ERROR,REQUEST \# Security filter chain dispatcher types.  
   
\# SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)  
spring.security.oauth2.client.provider.\*= \# OAuth provider details.  
spring.security.oauth2.client.registration.\*= \# OAuth client registrations.  
   
\# ----------------------------------------  
\# DATA PROPERTIES  
\# ----------------------------------------  
   
\# FLYWAY (FlywayProperties)  
spring.flyway.allow-mixed-migrations= \#  
spring.flyway.baseline-description= \#  
spring.flyway.baseline-on-migrate= \#  
spring.flyway.baseline-version=1 \# version to start migration  
spring.flyway.check-location=true \# Check that migration scripts location exists.  
spring.flyway.clean-disabled= \#  
spring.flyway.clean-on-validation-error= \#  
spring.flyway.enabled=true \# Enable flyway.  
spring.flyway.encoding= \#  
spring.flyway.group= \#  
spring.flyway.ignore-failed-future-migration= \#  
spring.flyway.ignore-future-migrations= \#  
spring.flyway.ignore-missing-migrations= \#  
spring.flyway.init-sqls= \# SQL statements to execute to initialize a connection immediately after obtaining it.  
spring.flyway.installed-by= \#  
spring.flyway.locations=classpath:db/migration \# locations of migrations scripts  
spring.flyway.mixed= \#  
spring.flyway.out-of-order= \#  
spring.flyway.password= \# JDBC password if you want Flyway to create its own DataSource  
spring.flyway.placeholder-prefix= \#  
spring.flyway.placeholder-replacement= \#  
spring.flyway.placeholder-suffix= \#  
spring.flyway.placeholders.\*= \#  
spring.flyway.repeatable-sql-migration-prefix= \#  
spring.flyway.schemas= \# schemas to update  
spring.flyway.skip-default-callbacks= \#  
spring.flyway.skip-default-resolvers= \#  
spring.flyway.sql-migration-prefix=V \#  
spring.flyway.sql-migration-separator= \#  
spring.flyway.sql-migration-suffix=.sql \#  
spring.flyway.table= \#  
spring.flyway.target= \#  
spring.flyway.url= \# JDBC url of the database to migrate. If not set, the primary configured data source is used.  
spring.flyway.user= \# Login user of the database to migrate.  
spring.flyway.validate-on-migrate= \#  
   
\# LIQUIBASE (LiquibaseProperties)  
spring.liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml \# Change log configuration path.  
spring.liquibase.check-change-log-location=true \# Check the change log location exists.  
spring.liquibase.contexts= \# Comma-separated list of runtime contexts to use.  
spring.liquibase.default-schema= \# Default database schema.  
spring.liquibase.drop-first=false \# Drop the database schema first.  
spring.liquibase.enabled=true \# Enable liquibase support.  
spring.liquibase.labels= \# Comma-separated list of runtime labels to use.  
spring.liquibase.parameters.\*= \# Change log parameters.  
spring.liquibase.password= \# Login password of the database to migrate.  
spring.liquibase.rollback-file= \# File to which rollback SQL will be written when an update is performed.  
spring.liquibase.url= \# JDBC url of the database to migrate. If not set, the primary configured data source is used.  
spring.liquibase.user= \# Login user of the database to migrate.  
   
\# COUCHBASE (CouchbaseProperties)  
spring.couchbase.bootstrap-hosts= \# Couchbase nodes (host or IP address) to bootstrap from.  
spring.couchbase.bucket.name=default \# Name of the bucket to connect to.  
spring.couchbase.bucket.password=  \# Password of the bucket.  
spring.couchbase.env.endpoints.key-value=1 \# Number of sockets per node against the Key/value service.  
spring.couchbase.env.endpoints.query=1 \# Number of sockets per node against the Query (N1QL) service.  
spring.couchbase.env.endpoints.view=1 \# Number of sockets per node against the view service.  
spring.couchbase.env.ssl.enabled= \# Enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.  
spring.couchbase.env.ssl.key-store= \# Path to the JVM key store that holds the certificates.  
spring.couchbase.env.ssl.key-store-password= \# Password used to access the key store.  
spring.couchbase.env.timeouts.connect=5000 \# Bucket connections timeout in milliseconds.  
spring.couchbase.env.timeouts.key-value=2500 \# Blocking operations performed on a specific key timeout in milliseconds.  
spring.couchbase.env.timeouts.query=7500 \# N1QL query operations timeout in milliseconds.  
spring.couchbase.env.timeouts.socket-connect=1000 \# Socket connect connections timeout in milliseconds.  
spring.couchbase.env.timeouts.view=7500 \# Regular and geospatial view operations timeout in milliseconds.  
   
\# DAO (PersistenceExceptionTranslationAutoConfiguration)  
spring.dao.exceptiontranslation.enabled=true \# Enable the PersistenceExceptionTranslationPostProcessor.  
   
\# CASSANDRA (CassandraProperties)  
spring.data.cassandra.cluster-name= \# Name of the Cassandra cluster.  
spring.data.cassandra.compression=none \# Compression supported by the Cassandra binary protocol.  
spring.data.cassandra.connect-timeout-millis= \# Socket option: connection time out.  
spring.data.cassandra.consistency-level= \# Queries consistency level.  
spring.data.cassandra.contact-points=localhost \# Comma-separated list of cluster node addresses.  
spring.data.cassandra.fetch-size= \# Queries default fetch size.  
spring.data.cassandra.keyspace-name= \# Keyspace name to use.  
spring.data.cassandra.load-balancing-policy= \# Class name of the load balancing policy.  
spring.data.cassandra.port= \# Port of the Cassandra server.  
spring.data.cassandra.password= \# Login password of the server.  
spring.data.cassandra.pool.heartbeat-interval=30 \# Heartbeat interval (in seconds) after which a message is sent on an idle connection to make sure it's still alive.  
spring.data.cassandra.pool.idle-timeout=120 \# Idle timeout (in seconds) before an idle connection is removed.  
spring.data.cassandra.pool.max-queue-size=256 \# Maximum number of requests that get enqueued if no connection is available.  
spring.data.cassandra.pool.pool-timeout=5000 \# Pool timeout (in milliseconds) when trying to acquire a connection from a host's pool.  
spring.data.cassandra.reactive-repositories.enabled=true \# Enable Cassandra reactive repositories.  
spring.data.cassandra.read-timeout-millis= \# Socket option: read time out.  
spring.data.cassandra.reconnection-policy= \# Reconnection policy class.  
spring.data.cassandra.repositories.enabled= \# Enable Cassandra repositories.  
spring.data.cassandra.retry-policy= \# Class name of the retry policy.  
spring.data.cassandra.serial-consistency-level= \# Queries serial consistency level.  
spring.data.cassandra.schema-action=none \# Schema action to take at startup.  
spring.data.cassandra.ssl=false \# Enable SSL support.  
spring.data.cassandra.username= \# Login user of the server.  
   
\# DATA COUCHBASE (CouchbaseDataProperties)  
spring.data.couchbase.auto-index=false \# Automatically create views and indexes.  
spring.data.couchbase.consistency=read-your-own-writes \# Consistency to apply by default on generated queries.  
spring.data.couchbase.reactive-repositories.enabled=true \# Enable Couchbase reactive repositories.  
spring.data.couchbase.repositories.enabled=true \# Enable Couchbase repositories.  
   
\# ELASTICSEARCH (ElasticsearchProperties)  
spring.data.elasticsearch.cluster-name=elasticsearch \# Elasticsearch cluster name.  
spring.data.elasticsearch.cluster-nodes= \# Comma-separated list of cluster node addresses.  
spring.data.elasticsearch.properties.\*= \# Additional properties used to configure the client.  
spring.data.elasticsearch.repositories.enabled=true \# Enable Elasticsearch repositories.  
   
\# DATA LDAP  
spring.data.ldap.repositories.enabled=true \# Enable LDAP repositories.  
   
\# MONGODB (MongoProperties)  
spring.data.mongodb.authentication-database= \# Authentication database name.  
spring.data.mongodb.database=test \# Database name.  
spring.data.mongodb.field-naming-strategy= \# Fully qualified name of the FieldNamingStrategy to use.  
spring.data.mongodb.grid-fs-database= \# GridFS database name.  
spring.data.mongodb.host=localhost \# Mongo server host. Cannot be set with uri.  
spring.data.mongodb.password= \# Login password of the mongo server. Cannot be set with uri.  
spring.data.mongodb.port=27017 \# Mongo server port. Cannot be set with uri.  
spring.data.mongodb.reactive-repositories.enabled=true \# Enable Mongo reactive repositories.  
spring.data.mongodb.repositories.enabled=true \# Enable Mongo repositories.  
spring.data.mongodb.uri=mongodb://localhost/test \# Mongo database URI. Cannot be set with host, port and credentials.  
spring.data.mongodb.username= \# Login user of the mongo server. Cannot be set with uri.  
   
\# DATA REDIS  
spring.data.redis.repositories.enabled=true \# Enable Redis repositories.  
   
\# NEO4J (Neo4jProperties)  
spring.data.neo4j.auto-index=none \# Auto index mode.  
spring.data.neo4j.embedded.enabled=true \# Enable embedded mode if the embedded driver is available.  
spring.data.neo4j.open-in-view=true \# Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.  
spring.data.neo4j.password= \# Login password of the server.  
spring.data.neo4j.repositories.enabled=true \# Enable Neo4j repositories.  
spring.data.neo4j.uri= \# URI used by the driver. Auto-detected by default.  
spring.data.neo4j.username= \# Login user of the server.  
   
\# DATA REST (RepositoryRestProperties)  
spring.data.rest.base-path= \# Base path to be used by Spring Data REST to expose repository resources.  
spring.data.rest.default-page-size= \# Default size of pages.  
spring.data.rest.detection-strategy=default \# Strategy to use to determine which repositories get exposed.  
spring.data.rest.enable-enum-translation= \# Enable enum value translation via the Spring Data REST default resource bundle.  
spring.data.rest.limit-param-name= \# Name of the URL query string parameter that indicates how many results to return at once.  
spring.data.rest.max-page-size= \# Maximum size of pages.  
spring.data.rest.page-param-name= \# Name of the URL query string parameter that indicates what page to return.  
spring.data.rest.return-body-on-create= \# Return a response body after creating an entity.  
spring.data.rest.return-body-on-update= \# Return a response body after updating an entity.  
spring.data.rest.sort-param-name= \# Name of the URL query string parameter that indicates what direction to sort results.  
   
\# SOLR (SolrProperties)  
spring.data.solr.host=http://127.0.0.1:8983/solr \# Solr host. Ignored if "zk-host" is set.  
spring.data.solr.repositories.enabled=true \# Enable Solr repositories.  
spring.data.solr.zk-host= \# ZooKeeper host address in the form HOST:PORT.  
   
\# DATA WEB (SpringDataWebProperties)  
spring.data.web.pageable.default-page-size=20 \# Default page size.  
spring.data.web.pageable.page-parameter=page \# Page index parameter name.  
spring.data.web.pageable.size-parameter=size \# Page size parameter name.  
spring.data.web.sort.sort-parameter=sort \# Sort parameter name.  
   
\# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)  
spring.datasource.continue-on-error=false \# Do not stop if an error occurs while initializing the database.  
spring.datasource.data= \# Data (DML) script resource references.  
spring.datasource.data-username= \# User of the database to execute DML scripts (if different).  
spring.datasource.data-password= \# Password of the database to execute DML scripts (if different).  
spring.datasource.dbcp2.\*= \# Commons DBCP2 specific settings  
spring.datasource.driver-class-name= \# Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.  
spring.datasource.generate-unique-name=false \# Generate a random datasource name.  
spring.datasource.hikari.\*= \# Hikari specific settings  
spring.datasource.initialization-mode=embedded \# Initialize the datasource using available DDL and DML scripts.  
spring.datasource.jmx-enabled=false \# Enable JMX support (if provided by the underlying pool).  
spring.datasource.jndi-name= \# JNDI location of the datasource. Class, url, username & password are ignored when set.  
spring.datasource.name=testdb \# Name of the datasource.  
spring.datasource.password= \# Login password of the database.  
spring.datasource.platform=all \# Platform to use in the DDL or DML scripts (e.g. schema-$\{platform\}.sql or data-$\{platform\}.sql).  
spring.datasource.schema= \# Schema (DDL) script resource references.  
spring.datasource.schema-username= \# User of the database to execute DDL scripts (if different).  
spring.datasource.schema-password= \# Password of the database to execute DDL scripts (if different).  
spring.datasource.separator=; \# Statement separator in SQL initialization scripts.  
spring.datasource.sql-script-encoding= \# SQL scripts encoding.  
spring.datasource.tomcat.\*= \# Tomcat datasource specific settings  
spring.datasource.type= \# Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.  
spring.datasource.url= \# JDBC url of the database.  
spring.datasource.username= \# Login user of the database.  
spring.datasource.xa.data-source-class-name= \# XA datasource fully qualified name.  
   spring.datasource.xa.properties= \# Properties to pass to the XA data source.  
   
\# JEST (Elasticsearch HTTP client) (JestProperties)  
spring.elasticsearch.jest.connection-timeout=3000 \# Connection timeout in milliseconds.  
spring.elasticsearch.jest.multi-threaded=true \# Enable connection requests from multiple execution threads.  
spring.elasticsearch.jest.password= \# Login password.  
spring.elasticsearch.jest.proxy.host= \# Proxy host the HTTP client should use.  
spring.elasticsearch.jest.proxy.port= \# Proxy port the HTTP client should use.  
spring.elasticsearch.jest.read-timeout=3000 \# Read timeout in milliseconds.  
spring.elasticsearch.jest.uris=http://localhost:9200 \# Comma-separated list of the Elasticsearch instances to use.  
spring.elasticsearch.jest.username= \# Login user.  
   
\# H2 Web Console (H2ConsoleProperties)  
spring.h2.console.enabled=false \# Enable the console.  
spring.h2.console.path=/h2-console \# Path at which the console will be available.  
spring.h2.console.settings.trace=false \# Enable trace output.  
spring.h2.console.settings.web-allow-others=false \# Enable remote access.  
   
\# InfluxDB (InfluxDbProperties)  
spring.influx.password= \# Login password.  
spring.influx.url= \# Url of the InfluxDB instance to connect to.  
spring.influx.user= \# Login user.  
   
\# JOOQ (JooqAutoConfiguration)  
spring.jooq.sql-dialect= \# Sql dialect to use, auto-detected by default.  
   
\# JDBC (JdbcProperties)  
spring.jdbc.template.fetch-size=-1 \# Number of rows that should be fetched from the database when more rows are needed.  
spring.jdbc.template.max-rows=-1 \# Maximum number of rows.  
spring.jdbc.template.query-timeout=-1 \# Query timeout in seconds.  
   
\# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)  
spring.data.jpa.repositories.enabled=true \# Enable JPA repositories.  
spring.jpa.database= \# Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.  
spring.jpa.database-platform= \# Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.  
spring.jpa.generate-ddl=false \# Initialize the schema on startup.  
spring.jpa.hibernate.ddl-auto= \# DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database and no schema manager was detected, "none" otherwise.  
spring.jpa.hibernate.naming.implicit-strategy= \# Hibernate 5 implicit naming strategy fully qualified name.  
spring.jpa.hibernate.naming.physical-strategy= \# Hibernate 5 physical naming strategy fully qualified name.  
spring.jpa.hibernate.use-new-id-generator-mappings= \# Use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.  
spring.jpa.mapping-resources= \# Mapping resources (equivalent to "mapping-file" entries in persistence.xml).  
spring.jpa.open-in-view=true \# Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.  
spring.jpa.properties.\*= \# Additional native properties to set on the JPA provider.  
spring.jpa.show-sql=false \# Enable logging of SQL statements.  
   
\# JTA (JtaAutoConfiguration)  
spring.jta.enabled=true \# Enable JTA support.  
spring.jta.log-dir= \# Transaction logs directory.  
spring.jta.transaction-manager-id= \# Transaction manager unique identifier.  
   
\# ATOMIKOS (AtomikosProperties)  
spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 \# Timeout, in seconds, for borrowing connections from the pool.  
spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true \# Whether or not to ignore the transacted flag when creating session.  
spring.jta.atomikos.connectionfactory.local-transaction-mode=false \# Whether or not local transactions are desired.  
spring.jta.atomikos.connectionfactory.maintenance-interval=60 \# The time, in seconds, between runs of the pool's maintenance thread.  
spring.jta.atomikos.connectionfactory.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.atomikos.connectionfactory.max-lifetime=0 \# The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.  
spring.jta.atomikos.connectionfactory.max-pool-size=1 \# The maximum size of the pool.  
spring.jta.atomikos.connectionfactory.min-pool-size=1 \# The minimum size of the pool.  
spring.jta.atomikos.connectionfactory.reap-timeout=0 \# The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.  
spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory \# The unique name used to identify the resource during recovery.  
spring.jta.atomikos.datasource.borrow-connection-timeout=30 \# Timeout, in seconds, for borrowing connections from the pool.  
spring.jta.atomikos.datasource.default-isolation-level= \# Default isolation level of connections provided by the pool.  
spring.jta.atomikos.datasource.login-timeout= \# Timeout, in seconds, for establishing a database connection.  
spring.jta.atomikos.datasource.maintenance-interval=60 \# The time, in seconds, between runs of the pool's maintenance thread.  
spring.jta.atomikos.datasource.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.atomikos.datasource.max-lifetime=0 \# The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.  
spring.jta.atomikos.datasource.max-pool-size=1 \# The maximum size of the pool.  
spring.jta.atomikos.datasource.min-pool-size=1 \# The minimum size of the pool.  
spring.jta.atomikos.datasource.reap-timeout=0 \# The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.  
spring.jta.atomikos.datasource.test-query= \# SQL query or statement used to validate a connection before returning it.  
spring.jta.atomikos.datasource.unique-resource-name=dataSource \# The unique name used to identify the resource during recovery.  
spring.jta.atomikos.properties.allow-sub-transactions=true \# Specify if sub-transactions are allowed.  
spring.jta.atomikos.properties.checkpoint-interval=500 \# Interval between checkpoints.  
spring.jta.atomikos.properties.default-jta-timeout=10000 \# Default timeout for JTA transactions.  
spring.jta.atomikos.properties.enable-logging=true \# Enable disk logging.  
spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false \# Specify if a VM shutdown should trigger forced shutdown of the transaction core.  
spring.jta.atomikos.properties.log-base-dir= \# Directory in which the log files should be stored.  
spring.jta.atomikos.properties.log-base-name=tmlog \# Transactions log file base name.  
spring.jta.atomikos.properties.max-actives=50 \# Maximum number of active transactions.  
spring.jta.atomikos.properties.max-timeout=300000 \# Maximum timeout (in milliseconds) that can be allowed for transactions.  
spring.jta.atomikos.properties.recovery.delay=10000 \# Delay between two recovery scans.  
spring.jta.atomikos.properties.recovery.forget-orphaned-log-entries-delay=86400000 \# Delay after which recovery can cleanup pending ('orphaned') log entries.  
spring.jta.atomikos.properties.recovery.max-retries=5 \# Number of retry attempts to commit the transaction before throwing an exception.  
spring.jta.atomikos.properties.recovery.retry-interval=10000 \# Delay between retry attempts.  
spring.jta.atomikos.properties.serial-jta-transactions=true \# Specify if sub-transactions should be joined when possible.  
spring.jta.atomikos.properties.service= \# Transaction manager implementation that should be started.  
spring.jta.atomikos.properties.threaded-two-phase-commit=false \# Use different (and concurrent) threads for two-phase commit on the participating resources.  
spring.jta.atomikos.properties.transaction-manager-unique-name= \# Transaction manager's unique name.  
   
\# BITRONIX  
spring.jta.bitronix.connectionfactory.acquire-increment=1 \# Number of connections to create when growing the pool.  
spring.jta.bitronix.connectionfactory.acquisition-interval=1 \# Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.  
spring.jta.bitronix.connectionfactory.acquisition-timeout=30 \# Timeout, in seconds, for acquiring connections from the pool.  
spring.jta.bitronix.connectionfactory.allow-local-transactions=true \# Whether or not the transaction manager should allow mixing XA and non-XA transactions.  
spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false \# Whether or not the transaction timeout should be set on the XAResource when it is enlisted.  
spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true \# Whether or not resources should be enlisted and delisted automatically.  
spring.jta.bitronix.connectionfactory.cache-producers-consumers=true \# Whether or not produces and consumers should be cached.  
spring.jta.bitronix.connectionfactory.defer-connection-release=true \# Whether or not the provider can run many transactions on the same connection and supports transaction interleaving.  
spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false \# Whether or not recovery failures should be ignored.  
spring.jta.bitronix.connectionfactory.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.bitronix.connectionfactory.max-pool-size=10 \# The maximum size of the pool. 0 denotes no limit.  
spring.jta.bitronix.connectionfactory.min-pool-size=0 \# The minimum size of the pool.  
spring.jta.bitronix.connectionfactory.password= \# The password to use to connect to the JMS provider.  
spring.jta.bitronix.connectionfactory.share-transaction-connections=false \#  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.  
spring.jta.bitronix.connectionfactory.test-connections=true \# Whether or not connections should be tested when acquired from the pool.  
spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 \# The position that this resource should take during two-phase commit (always first is Integer.MIN\_VALUE, always last is Integer.MAX\_VALUE).  
spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory \# The unique name used to identify the resource during recovery.  
spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.  
spring.jta.bitronix.connectionfactory.user= \# The user to use to connect to the JMS provider.  
spring.jta.bitronix.datasource.acquire-increment=1 \# Number of connections to create when growing the pool.  
spring.jta.bitronix.datasource.acquisition-interval=1 \# Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.  
spring.jta.bitronix.datasource.acquisition-timeout=30 \# Timeout, in seconds, for acquiring connections from the pool.  
spring.jta.bitronix.datasource.allow-local-transactions=true \# Whether or not the transaction manager should allow mixing XA and non-XA transactions.  
spring.jta.bitronix.datasource.apply-transaction-timeout=false \# Whether or not the transaction timeout should be set on the XAResource when it is enlisted.  
spring.jta.bitronix.datasource.automatic-enlisting-enabled=true \# Whether or not resources should be enlisted and delisted automatically.  
spring.jta.bitronix.datasource.cursor-holdability= \# The default cursor holdability for connections.  
spring.jta.bitronix.datasource.defer-connection-release=true \# Whether or not the database can run many transactions on the same connection and supports transaction interleaving.  
spring.jta.bitronix.datasource.enable-jdbc4-connection-test= \# Whether or not Connection.isValid() is called when acquiring a connection from the pool.  
spring.jta.bitronix.datasource.ignore-recovery-failures=false \# Whether or not recovery failures should be ignored.  
spring.jta.bitronix.datasource.isolation-level= \# The default isolation level for connections.  
spring.jta.bitronix.datasource.local-auto-commit= \# The default auto-commit mode for local transactions.  
spring.jta.bitronix.datasource.login-timeout= \# Timeout, in seconds, for establishing a database connection.  
spring.jta.bitronix.datasource.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.bitronix.datasource.max-pool-size=10 \# The maximum size of the pool. 0 denotes no limit.  
spring.jta.bitronix.datasource.min-pool-size=0 \# The minimum size of the pool.  
spring.jta.bitronix.datasource.prepared-statement-cache-size=0 \# The target size of the prepared statement cache. 0 disables the cache.  
spring.jta.bitronix.datasource.share-transaction-connections=false \#  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.  
spring.jta.bitronix.datasource.test-query= \# SQL query or statement used to validate a connection before returning it.  
spring.jta.bitronix.datasource.two-pc-ordering-position=1 \# The position that this resource should take during two-phase commit (always first is Integer.MIN\_VALUE, always last is Integer.MAX\_VALUE).  
spring.jta.bitronix.datasource.unique-name=dataSource \# The unique name used to identify the resource during recovery.  
spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.  
spring.jta.bitronix.properties.allow-multiple-lrc=false \# Allow multiple LRC resources to be enlisted into the same transaction.  
spring.jta.bitronix.properties.asynchronous2-pc=false \# Enable asynchronously execution of two phase commit.  
spring.jta.bitronix.properties.background-recovery-interval-seconds=60 \# Interval in seconds at which to run the recovery process in the background.  
spring.jta.bitronix.properties.current-node-only-recovery=true \# Recover only the current node.  
spring.jta.bitronix.properties.debug-zero-resource-transaction=false \# Log the creation and commit call stacks of transactions executed without a single enlisted resource.  
spring.jta.bitronix.properties.default-transaction-timeout=60 \# Default transaction timeout in seconds.  
spring.jta.bitronix.properties.disable-jmx=false \# Enable JMX support.  
spring.jta.bitronix.properties.exception-analyzer= \# Set the fully qualified name of the exception analyzer implementation to use.  
spring.jta.bitronix.properties.filter-log-status=false \# Enable filtering of logs so that only mandatory logs are written.  
spring.jta.bitronix.properties.force-batching-enabled=true \#  Set if disk forces are batched.  
spring.jta.bitronix.properties.forced-write-enabled=true \# Set if logs are forced to disk.  
spring.jta.bitronix.properties.graceful-shutdown-interval=60 \# Maximum amount of seconds the TM will wait for transactions to get done before aborting them at shutdown time.  
spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= \# JNDI name of the TransactionSynchronizationRegistry.  
spring.jta.bitronix.properties.jndi-user-transaction-name= \# JNDI name of the UserTransaction.  
spring.jta.bitronix.properties.journal=disk \# Name of the journal. Can be 'disk', 'null' or a class name.  
spring.jta.bitronix.properties.log-part1-filename=btm1.tlog \# Name of the first fragment of the journal.  
spring.jta.bitronix.properties.log-part2-filename=btm2.tlog \# Name of the second fragment of the journal.  
spring.jta.bitronix.properties.max-log-size-in-mb=2 \# Maximum size in megabytes of the journal fragments.  
spring.jta.bitronix.properties.resource-configuration-filename= \# ResourceLoader configuration file name.  
spring.jta.bitronix.properties.server-id= \# ASCII ID that must uniquely identify this TM instance. Default to the machine's IP address.  
spring.jta.bitronix.properties.skip-corrupted-logs=false \# Skip corrupted transactions log entries.  
spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true \# Log a warning for transactions executed without a single enlisted resource.  
   
\# NARAYANA (NarayanaProperties)  
spring.jta.narayana.default-timeout=60 \# Transaction timeout in seconds.  
spring.jta.narayana.expiry-scanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner \# Comma-separated list of expiry scanners.  
spring.jta.narayana.log-dir= \# Transaction object store directory.  
spring.jta.narayana.one-phase-commit=true \# Enable one phase commit optimisation.  
spring.jta.narayana.periodic-recovery-period=120 \# Interval in which periodic recovery scans are performed in seconds.  
spring.jta.narayana.recovery-backoff-period=10 \# Back off period between first and second phases of the recovery scan in seconds.  
spring.jta.narayana.recovery-db-pass= \# Database password to be used by recovery manager.  
spring.jta.narayana.recovery-db-user= \# Database username to be used by recovery manager.  
spring.jta.narayana.recovery-jms-pass= \# JMS password to be used by recovery manager.  
spring.jta.narayana.recovery-jms-user= \# JMS username to be used by recovery manager.  
spring.jta.narayana.recovery-modules= \# Comma-separated list of recovery modules.  
spring.jta.narayana.transaction-manager-id=1 \# Unique transaction manager id.  
spring.jta.narayana.xa-resource-orphan-filters= \# Comma-separated list of orphan filters.  
   
\# EMBEDDED MONGODB (EmbeddedMongoProperties)  
spring.mongodb.embedded.features=SYNC\_DELAY \# Comma-separated list of features to enable.  
spring.mongodb.embedded.storage.database-dir= \# Directory used for data storage.  
spring.mongodb.embedded.storage.oplog-size= \# Maximum size of the oplog in megabytes.  
spring.mongodb.embedded.storage.repl-set-name= \# Name of the replica set.  
spring.mongodb.embedded.version=2.6.10 \# Version of Mongo to use.  
   
\# REDIS (RedisProperties)  
spring.redis.cluster.max-redirects= \# Maximum number of redirects to follow when executing commands across the cluster.  
spring.redis.cluster.nodes= \# Comma-separated list of "host:port" pairs to bootstrap from.  
spring.redis.database=0 \# Database index used by the connection factory.  
spring.redis.url= \# Connection URL, will override host, port and password (user will be ignored), e.g. redis://user:password@example.com:6379  
spring.redis.host=localhost \# Redis server host.  
spring.redis.jedis.pool.max-active=8 \# Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.  
spring.redis.jedis.pool.max-idle=8 \# Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.  
spring.redis.jedis.pool.max-wait=-1 \# Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.  
spring.redis.jedis.pool.min-idle=0 \# Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.  
spring.redis.lettuce.pool.max-active=8 \# Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.  
spring.redis.lettuce.pool.max-idle=8 \# Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.  
spring.redis.lettuce.pool.max-wait=-1 \# Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.  
spring.redis.lettuce.pool.min-idle=0 \# Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.  
spring.redis.lettuce.shutdown-timeout=100 \# Shutdown timeout in milliseconds.  
spring.redis.password= \# Login password of the redis server.  
spring.redis.port=6379 \# Redis server port.  
spring.redis.sentinel.master= \# Name of Redis server.  
spring.redis.sentinel.nodes= \# Comma-separated list of host:port pairs.  
spring.redis.ssl=false \# Enable SSL support.  
spring.redis.timeout=0 \# Connection timeout in milliseconds.  
   
\# TRANSACTION (TransactionProperties)  
spring.transaction.default-timeout= \# Default transaction timeout in seconds.  
spring.transaction.rollback-on-commit-failure= \# Perform the rollback on commit failures.  
   
   
   
\# ----------------------------------------  
\# INTEGRATION PROPERTIES  
\# ----------------------------------------  
   
\# ACTIVEMQ (ActiveMQProperties)  
spring.activemq.broker-url= \# URL of the ActiveMQ broker. Auto-generated by default.  
spring.activemq.close-timeout=15000 \# Time to wait, in milliseconds, before considering a close complete.  
spring.activemq.in-memory=true \# Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified.  
spring.activemq.non-blocking-redelivery=false \# Do not stop message delivery before re-delivering messages from a rolled back transaction. This implies that message order will not be preserved when this is enabled.  
spring.activemq.password= \# Login password of the broker.  
spring.activemq.send-timeout=0 \# Time to wait, in milliseconds, on Message sends for a response. Set it to 0 to indicate to wait forever.  
spring.activemq.user= \# Login user of the broker.  
spring.activemq.packages.trust-all= \# Trust all packages.  
spring.activemq.packages.trusted= \# Comma-separated list of specific packages to trust (when not trusting all packages).  
spring.activemq.pool.block-if-full=true \# Block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead.  
spring.activemq.pool.block-if-full-timeout=-1 \# Blocking period, in milliseconds, before throwing an exception if the pool is still full.  
spring.activemq.pool.create-connection-on-startup=true \# Create a connection on startup. Can be used to warm-up the pool on startup.  
spring.activemq.pool.enabled=false \# Whether a PooledConnectionFactory should be created instead of a regular ConnectionFactory.  
spring.activemq.pool.expiry-timeout=0 \# Connection expiration timeout in milliseconds.  
spring.activemq.pool.idle-timeout=30000 \# Connection idle timeout in milliseconds.  
spring.activemq.pool.max-connections=1 \# Maximum number of pooled connections.  
spring.activemq.pool.maximum-active-session-per-connection=500 \# Maximum number of active sessions per connection.  
spring.activemq.pool.reconnect-on-exception=true \# Reset the connection when a "JMSException" occurs.  
spring.activemq.pool.time-between-expiration-check=-1 \# Time to sleep, in milliseconds, between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs.  
spring.activemq.pool.use-anonymous-producers=true \# Use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required.  
   
\# ARTEMIS (ArtemisProperties)  
spring.artemis.embedded.cluster-password= \# Cluster password. Randomly generated on startup by default.  
spring.artemis.embedded.data-directory= \# Journal file directory. Not necessary if persistence is turned off.  
spring.artemis.embedded.enabled=true \# Enable embedded mode if the Artemis server APIs are available.  
spring.artemis.embedded.persistent=false \# Enable persistent store.  
spring.artemis.embedded.queues= \# Comma-separated list of queues to create on startup.  
spring.artemis.embedded.server-id= \# Server id. By default, an auto-incremented counter is used.  
spring.artemis.embedded.topics= \# Comma-separated list of topics to create on startup.  
spring.artemis.host=localhost \# Artemis broker host.  
spring.artemis.mode= \# Artemis deployment mode, auto-detected by default.  
spring.artemis.password= \# Login password of the broker.  
spring.artemis.port=61616 \# Artemis broker port.  
spring.artemis.user= \# Login user of the broker.  
   
\# SPRING BATCH (BatchProperties)  
spring.batch.initialize-schema=embedded \# Database schema initialization mode.  
spring.batch.job.enabled=true \# Execute all Spring Batch jobs in the context on startup.  
spring.batch.job.names= \# Comma-separated list of job names to execute on startup (For instance \`job1,job2\`). By default, all Jobs found in the context are executed.  
spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
spring.batch.table-prefix= \# Table prefix for all the batch meta-data tables.  
   
\# SPRING INTEGRATION (IntegrationProperties)  
spring.integration.jdbc.initialize-schema=embedded \# Database schema initialization mode.  
spring.integration.jdbc.schema=classpath:org/springframework/integration/jdbc/schema-@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
   
\# JMS (JmsProperties)  
spring.jms.jndi-name= \# Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.  
spring.jms.listener.acknowledge-mode= \# Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.  
spring.jms.listener.auto-startup=true \# Start the container automatically on startup.  
spring.jms.listener.concurrency= \# Minimum number of concurrent consumers.  
spring.jms.listener.max-concurrency= \# Maximum number of concurrent consumers.  
spring.jms.pub-sub-domain=false \# Specify if the default destination type is topic.  
spring.jms.template.default-destination= \# Default destination to use on send/receive operations that do not have a destination parameter.  
spring.jms.template.delivery-delay= \# Delivery delay to use for send calls in milliseconds.  
spring.jms.template.delivery-mode= \# Delivery mode. Enable QoS when set.  
spring.jms.template.priority= \# Priority of a message when sending. Enable QoS when set.  
spring.jms.template.qos-enabled= \# Enable explicit QoS when sending a message.  
spring.jms.template.receive-timeout= \# Timeout to use for receive calls in milliseconds.  
spring.jms.template.time-to-live= \# Time-to-live of a message when sending in milliseconds. Enable QoS when set.  
   
\# APACHE KAFKA (KafkaProperties)  
spring.kafka.admin.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.admin.fail-fast=false \# Fail fast if the broker is not available on startup.  
spring.kafka.admin.properties.\*= \# Additional admin-specific properties used to configure the client.  
spring.kafka.admin.ssl.key-password= \# Password of the private key in the key store file.  
spring.kafka.admin.ssl.keystore-location= \# Location of the key store file.  
spring.kafka.admin.ssl.keystore-password= \# Store password for the key store file.  
spring.kafka.admin.ssl.truststore-location= \# Location of the trust store file.  
spring.kafka.admin.ssl.truststore-password= \# Store password for the trust store file.  
spring.kafka.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.consumer.auto-commit-interval= \# Frequency in milliseconds that the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' true.  
spring.kafka.consumer.auto-offset-reset= \# What to do when there is no initial offset in Kafka or if the current offset does not exist any more on the server.  
spring.kafka.consumer.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.consumer.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.consumer.enable-auto-commit= \# If true the consumer's offset will be periodically committed in the background.  
spring.kafka.consumer.fetch-max-wait= \# Maximum amount of time in milliseconds the server will block before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes".  
spring.kafka.consumer.fetch-min-size= \# Minimum amount of data the server should return for a fetch request in bytes.  
spring.kafka.consumer.group-id= \# Unique string that identifies the consumer group this consumer belongs to.  
spring.kafka.consumer.heartbeat-interval= \# Expected time in milliseconds between heartbeats to the consumer coordinator.  
spring.kafka.consumer.key-deserializer= \# Deserializer class for keys.  
spring.kafka.consumer.max-poll-records= \# Maximum number of records returned in a single call to poll().  
spring.kafka.consumer.properties.\*= \# Additional consumer-specific properties used to configure the client.  
spring.kafka.consumer.ssl.key-password= \# Password of the private key in the key store file.  
spring.kafka.consumer.ssl.keystore-location= \# Location of the key store file.  
spring.kafka.consumer.ssl.keystore-password= \# Store password for the key store file.  
spring.kafka.consumer.ssl.truststore-location= \# Location of the trust store file.  
spring.kafka.consumer.ssl.truststore-password= \# Store password for the trust store file.  
spring.kafka.consumer.value-deserializer= \# Deserializer class for values.  
spring.kafka.jaas.control-flag=required \# Control flag for login configuration.  
spring.kafka.jaas.enabled= \# Enable JAAS configuration.  
spring.kafka.jaas.login-module=com.sun.security.auth.module.Krb5LoginModule \# Login module.  
spring.kafka.jaas.options= \# Additional JAAS options.  
spring.kafka.listener.ack-count= \# Number of records between offset commits when ackMode is "COUNT" or "COUNT\_TIME".  
spring.kafka.listener.ack-mode= \# Listener AckMode; see the spring-kafka documentation.  
spring.kafka.listener.ack-time= \# Time in milliseconds between offset commits when ackMode is "TIME" or "COUNT\_TIME".  
spring.kafka.listener.concurrency= \# Number of threads to run in the listener containers.  
spring.kafka.listener.poll-timeout= \# Timeout in milliseconds to use when polling the consumer.  
spring.kafka.listener.type=single \# Listener type.  
spring.kafka.producer.acks= \# Number of acknowledgments the producer requires the leader to have received before considering a request complete.  
spring.kafka.producer.batch-size= \# Number of records to batch before sending.  
spring.kafka.producer.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.producer.buffer-memory= \# Total bytes of memory the producer can use to buffer records waiting to be sent to the server.  
spring.kafka.producer.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.producer.compression-type= \# Compression type for all data generated by the producer.  
spring.kafka.producer.key-serializer= \# Serializer class for keys.  
spring.kafka.producer.properties.\*= \# Additional producer-specific properties used to configure the client.  
spring.kafka.producer.retries= \# When greater than zero, enables retrying of failed sends.  
spring.kafka.producer.ssl.key-password= \# Password of the private key in the key store file.  
spring.kafka.producer.ssl.keystore-location= \# Location of the key store file.  
spring.kafka.producer.ssl.keystore-password= \# Store password for the key store file.  
spring.kafka.producer.ssl.truststore-location= \# Location of the trust store file.  
spring.kafka.producer.ssl.truststore-password= \# Store password for the trust store file.  
spring.kafka.producer.value-serializer= \# Serializer class for values.  
spring.kafka.properties.\*= \# Additional properties, common to producers and consumers, used to configure the client.  
spring.kafka.ssl.key-password= \# Password of the private key in the key store file.  
spring.kafka.ssl.keystore-location= \# Location of the key store file.  
spring.kafka.ssl.keystore-password= \# Store password for the key store file.  
spring.kafka.ssl.truststore-location= \# Location of the trust store file.  
spring.kafka.ssl.truststore-password= \# Store password for the trust store file.  
spring.kafka.template.default-topic= \# Default topic to which messages will be sent.  
   
\# RABBIT (RabbitProperties)  
spring.rabbitmq.addresses= \# Comma-separated list of addresses to which the client should connect.  
spring.rabbitmq.cache.channel.checkout-timeout= \# Number of milliseconds to wait to obtain a channel if the cache size has been reached.  
spring.rabbitmq.cache.channel.size= \# Number of channels to retain in the cache.  
spring.rabbitmq.cache.connection.mode=channel \# Connection factory cache mode.  
spring.rabbitmq.cache.connection.size= \# Number of connections to cache.  
spring.rabbitmq.connection-timeout= \# Connection timeout, in milliseconds; zero for infinite.  
spring.rabbitmq.dynamic=true \# Create an AmqpAdmin bean.  
spring.rabbitmq.host=localhost \# RabbitMQ host.  
spring.rabbitmq.listener.direct.acknowledge-mode= \# Acknowledge mode of container.  
spring.rabbitmq.listener.direct.auto-startup=true \# Start the container automatically on startup.  
spring.rabbitmq.listener.direct.consumers-per-queue= \# Number of consumers per queue.  
spring.rabbitmq.listener.direct.default-requeue-rejected= \# Whether rejected deliveries are requeued by default; default true.  
spring.rabbitmq.listener.direct.idle-event-interval= \# How often idle container events should be published in milliseconds.  
spring.rabbitmq.listener.direct.prefetch= \# Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).  
spring.rabbitmq.listener.direct.retry.enabled=false \# Whether or not publishing retries are enabled.  
   spring.rabbitmq.listener.direct.retry.initial-interval=1000 \# Interval between the first and second attempt to publish or deliver a message.  
   spring.rabbitmq.listener.direct.retry.max-attempts=3 \# Maximum number of attempts to publish or deliver a message.  
   spring.rabbitmq.listener.direct.retry.max-interval=10000 \# Maximum interval between attempts.  
   spring.rabbitmq.listener.direct.retry.multiplier=1 \# A multiplier to apply to the previous retry interval.  
   spring.rabbitmq.listener.direct.retry.stateless=true \# Whether or not retries are stateless or stateful.  
spring.rabbitmq.listener.simple.acknowledge-mode= \# Acknowledge mode of container.  
spring.rabbitmq.listener.simple.auto-startup=true \# Start the container automatically on startup.  
spring.rabbitmq.listener.simple.concurrency= \# Minimum number of listener invoker threads.  
spring.rabbitmq.listener.simple.default-requeue-rejected= \# Whether or not to requeue delivery failures.  
spring.rabbitmq.listener.simple.idle-event-interval= \# How often idle container events should be published in milliseconds.  
spring.rabbitmq.listener.simple.max-concurrency= \# Maximum number of listener invoker.  
spring.rabbitmq.listener.simple.prefetch= \# Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).  
spring.rabbitmq.listener.simple.retry.enabled=false \# Whether or not publishing retries are enabled.  
spring.rabbitmq.listener.simple.retry.initial-interval=1000 \# Interval between the first and second attempt to deliver a message.  
spring.rabbitmq.listener.simple.retry.max-attempts=3 \# Maximum number of attempts to deliver a message.  
spring.rabbitmq.listener.simple.retry.max-interval=10000 \# Maximum interval between attempts.  
spring.rabbitmq.listener.simple.retry.multiplier=1.0 \# A multiplier to apply to the previous delivery retry interval.  
spring.rabbitmq.listener.simple.retry.stateless=true \# Whether or not retry is stateless or stateful.  
spring.rabbitmq.listener.simple.transaction-size= \# Number of messages to be processed in a transaction; number of messages between acks. For best results it should be less than or equal to the prefetch count.  
spring.rabbitmq.listener.type=simple \# Listener container type.  
spring.rabbitmq.password= \# Login to authenticate against the broker.  
spring.rabbitmq.port=5672 \# RabbitMQ port.  
spring.rabbitmq.publisher-confirms=false \# Enable publisher confirms.  
spring.rabbitmq.publisher-returns=false \# Enable publisher returns.  
spring.rabbitmq.requested-heartbeat= \# Requested heartbeat timeout, in seconds; zero for none.  
spring.rabbitmq.ssl.enabled=false \# Enable SSL support.  
spring.rabbitmq.ssl.key-store= \# Path to the key store that holds the SSL certificate.  
spring.rabbitmq.ssl.key-store-password= \# Password used to access the key store.  
spring.rabbitmq.ssl.key-store-type=PKCS12 \# Key store type.  
spring.rabbitmq.ssl.trust-store= \# Trust store that holds SSL certificates.  
spring.rabbitmq.ssl.trust-store-password= \# Password used to access the trust store.  
spring.rabbitmq.ssl.trust-store-type=JKS \# Trust store type.  
spring.rabbitmq.ssl.algorithm= \# SSL algorithm to use. By default configure by the rabbit client library.  
spring.rabbitmq.template.mandatory=false \# Enable mandatory messages.  
spring.rabbitmq.template.receive-timeout=0 \# Timeout for \`receive()\` methods.  
spring.rabbitmq.template.reply-timeout=5000 \# Timeout for \`sendAndReceive()\` methods.  
spring.rabbitmq.template.retry.enabled=false \# Set to true to enable retries in the \`RabbitTemplate\`.  
spring.rabbitmq.template.retry.initial-interval=1000 \# Interval between the first and second attempt to publish a message.  
spring.rabbitmq.template.retry.max-attempts=3 \# Maximum number of attempts to publish a message.  
spring.rabbitmq.template.retry.max-interval=10000 \# Maximum number of attempts to publish a message.  
spring.rabbitmq.template.retry.multiplier=1.0 \# A multiplier to apply to the previous publishing retry interval.  
spring.rabbitmq.username= \# Login user to authenticate to the broker.  
spring.rabbitmq.virtual-host= \# Virtual host to use when connecting to the broker.  
   
   
\# ----------------------------------------  
\# ACTUATOR PROPERTIES  
\# ----------------------------------------  
   
\# AUDIT EVENTS ENDPOINT (AuditEventsEndpoint)  
endpoints.auditevents.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.auditevents.enabled= \# Enable the auditevents endpoint.  
endpoints.auditevents.jmx.enabled= \# Expose the auditevents endpoint as a JMX MBean.  
endpoints.auditevents.web.enabled= \# Expose the auditevents endpoint as a Web endpoint.  
endpoints.auditevents.web.path=auditevents \# Path of the auditevents endpoint.  
   
\# BEANS ENDPOINT (BeansEndpoint)  
endpoints.beans.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.beans.enabled= \# Enable the beans endpoint.  
endpoints.beans.jmx.enabled= \# Expose the beans endpoint as a JMX MBean.  
endpoints.beans.web.enabled= \# Expose the beans endpoint as a Web endpoint.  
endpoints.beans.web.path=beans \# Path of the beans endpoint.  
   
\# CONDITIONS REPORT ENDPOINT (ConditionsReportEndpoint)  
endpoints.conditions.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.conditions.enabled= \# Enable the conditions endpoint.  
endpoints.conditions.jmx.enabled= \# Expose the conditions endpoint as a JMX MBean.  
endpoints.conditions.web.enabled= \# Expose the conditions endpoint as a Web endpoint.  
endpoints.conditions.web.path=conditions \# Path of the conditions endpoint.  
   
\# CONFIGURATION PROPERTIES REPORT ENDPOINT (ConfigurationPropertiesReportEndpoint)  
endpoints.configprops.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.configprops.enabled= \# Enable the configprops endpoint.  
endpoints.configprops.jmx.enabled= \# Expose the configprops endpoint as a JMX MBean.  
endpoints.configprops.keys-to-sanitize=password,secret,key,token,.\*credentials.\*,vcap\_services \# Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.  
endpoints.configprops.web.enabled= \# Expose the configprops endpoint as a Web endpoint.  
endpoints.configprops.web.path=configprops \# Path of the configprops endpoint.  
   
\# ENDPOINT DEFAULT SETTINGS  
endpoints.default.enabled=true \# Enable all endpoints by default.  
endpoints.default.jmx.enabled=true \# Enable all endpoints as JMX MBeans by default.  
endpoints.default.web.enabled=false \# Enable all endpoints as Web endpoints by default.  
   
\# ENVIRONMENT ENDPOINT  (EnvironmentEndpoint)  
endpoints.env.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.env.enabled= \# Enable the env endpoint.  
endpoints.env.jmx.enabled= \# Expose the env endpoint as a JMX MBean.  
endpoints.env.keys-to-sanitize=password,secret,key,token,.\*credentials.\*,vcap\_services \# Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.  
endpoints.env.web.enabled= \# Expose the env endpoint as a Web endpoint.  
endpoints.env.web.path=env \# Path of the env endpoint.  
   
\# FLYWAY ENDPOINT (FlywayEndpoint)  
endpoints.flyway.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.flyway.enabled= \# Enable the flyway endpoint.  
endpoints.flyway.jmx.enabled= \# Expose the flyway endpoint as a JMX MBean.  
endpoints.flyway.web.enabled= \# Expose the flyway endpoint as a Web endpoint.  
endpoints.flyway.web.path=flyway \# Path of the flyway endpoint.  
   
\# HEALTH ENDPOINT (HealthEndpoint)  
endpoints.health.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.health.enabled= \# Enable the health endpoint.  
endpoints.health.jmx.enabled= \# Expose the health endpoint as a JMX MBean.  
endpoints.health.web.enabled= \# Expose the health endpoint as a Web endpoint.  
endpoints.health.web.path=health \# Path of the health endpoint.  
   
\# HEAP DUMP ENDPOINT (HeapDumpWebEndpoint)  
endpoints.heapdump.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.heapdump.enabled= \# Enable the heapdump endpoint.  
endpoints.heapdump.web.enabled= \# Expose the heapdump endpoint as a Web endpoint.  
endpoints.heapdump.web.path=heapdump \# Path of the heapdump endpoint.  
   
\# INFO ENDPOINT (InfoEndpoint)  
endpoints.info.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.info.enabled=true \# Enable the info endpoint.  
endpoints.info.jmx.enabled=true \# Expose the info endpoint as a JMX MBean.  
endpoints.info.web.enabled=true \# Expose the info endpoint as a Web endpoint.  
endpoints.info.web.path=info \# Path of the info endpoint.  
   
\# LIQUIBASE ENDPOINT (LiquibaseEndpoint)  
endpoints.liquibase.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.liquibase.enabled= \# Enable the liquibase endpoint.  
endpoints.liquibase.jmx.enabled= \# Expose the liquibase endpoint as a JMX MBean.  
endpoints.liquibase.web.enabled= \# Expose the liquibase endpoint as a Web endpoint.  
endpoints.liquibase.web.path=liquibase \# Path of the liquibase endpoint.  
   
\# LOG FILE ENDPOINT (LogFileWebEndpoint)  
endpoints.logfile.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.logfile.enabled= \# Enable the logfile endpoint.  
endpoints.logfile.external-file= \# External Logfile to be accessed. Can be used if the logfile is written by output redirect and not by the logging system itself.  
endpoints.logfile.web.enabled= \# Expose the logfile endpoint as a Web endpoint.  
endpoints.logfile.web.path=logfile \# Path of the logfile endpoint.  
   
\# LOGGERS ENDPOINT (LoggersEndpoint)  
endpoints.loggers.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.loggers.enabled= \# Enable the loggers endpoint.  
endpoints.loggers.jmx.enabled= \# Expose the loggers endpoint as a JMX MBean.  
endpoints.loggers.web.enabled= \# Expose the loggers endpoint as a Web endpoint.  
endpoints.loggers.web.path=loggers \# Path of the loggers endpoint.  
   
\# REQUEST MAPPING ENDPOINT  (RequestMappingEndpoint)  
endpoints.mappings.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.mappings.enabled= \# Enable the mappings endpoint.  
endpoints.mappings.jmx.enabled= \# Expose the mappings endpoint as a JMX MBean.  
endpoints.mappings.web.enabled= \# Expose the mappings endpoint as a Web endpoint.  
endpoints.mappings.web.path=mappings \# Path of the mappings endpoint.  
   
\# METRICS ENDPOINT (MetricsEndpoint)  
endpoints.metrics.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.metrics.enabled= \# Enable the metrics endpoint.  
endpoints.metrics.jmx.enabled= \# Expose the metrics endpoint as a JMX MBean.  
endpoints.metrics.web.enabled= \# Expose the metrics endpoint as a Web endpoint.  
endpoints.metrics.web.path=metrics \# Path of the metrics endpoint.  
   
\# PROMETHEUS ENDPOINT (PrometheusScrapeEndpoint)  
endpoints.prometheus.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.prometheus.enabled= \# Enable the metrics endpoint.  
endpoints.prometheus.web.enabled= \# Expose the metrics endpoint as a Web endpoint.  
endpoints.prometheus.web.path=prometheus \# Path of the prometheus endpoint.  
   
\# SESSIONS ENDPOINT (SessionsEndpoint)  
endpoints.sessions.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.sessions.enabled= \# Enable the sessions endpoint.  
endpoints.sessions.jmx.enabled= \# Expose the sessions endpoint as a JMX MBean.  
endpoints.sessions.web.enabled= \# Expose the sessions endpoint as a Web endpoint.  
endpoints.sessions.web.path=sessions \# Path of the sessions endpoint.  
   
\# SHUTDOWN ENDPOINT (ShutdownEndpoint)  
endpoints.shutdown.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.shutdown.enabled=false \# Enable the shutdown endpoint.  
endpoints.shutdown.jmx.enabled=false \# Expose the shutdown endpoint as a JMX MBean.  
endpoints.shutdown.web.enabled=false \# Expose the shutdown endpoint as a Web endpoint.  
endpoints.shutdown.web.path=shutdown \# Path of the shutdown endpoint.  
   
\# STATUS ENDPOINT (StatusEndpoint)  
endpoints.status.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.status.enabled=true \# Enable the status endpoint.  
endpoints.status.jmx.enabled=true \# Expose the status endpoint as a JMX MBean.  
endpoints.status.web.enabled=true \# Expose the status endpoint as a Web endpoint.  
endpoints.status.web.path=status \# Path of the status endpoint.  
   
\# THREAD DUMP ENDPOINT (ThreadDumpEndpoint)  
endpoints.threaddump.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.threaddump.enabled= \# Enable the threaddump endpoint.  
endpoints.threaddump.jmx.enabled= \# Expose the threaddump endpoint as a JMX MBean.  
endpoints.threaddump.web.enabled= \# Expose the threaddump endpoint as a Web endpoint.  
endpoints.threaddump.web.path=threaddump \# Path of the threaddump endpoint.  
   
\# TRACE ENDPOINT (TraceEndpoint)  
endpoints.trace.cache.time-to-live=0 \# Maximum time in milliseconds that a response can be cached.  
endpoints.trace.enabled= \# Enable the trace endpoint.  
endpoints.trace.jmx.enabled= \# Expose the trace endpoint as a JMX MBean.  
endpoints.trace.web.enabled= \# Expose the trace endpoint as a Web endpoint.  
endpoints.trace.web.path=trace \# Path of the trace endpoint.  
   
\# MANAGEMENT HTTP SERVER (ManagementServerProperties)  
management.server.add-application-context-header=false \# Add the "X-Application-Context" HTTP header in each response. Requires a custom management.server.port.  
management.server.address= \# Network address that the management endpoints should bind to. Requires a custom management.server.port.  
management.server.context-path= \# Management endpoint context-path. For instance \`/actuator\`. Requires a custom management.server.port  
management.server.port= \# Management endpoint HTTP port. Uses the same port as the application by default. Configure a different port to use management-specific SSL.  
management.server.ssl.ciphers= \# Supported SSL ciphers. Requires a custom management.port.  
management.server.ssl.client-auth= \# Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.server.port.  
management.server.ssl.enabled= \# Enable SSL support. Requires a custom management.server.port.  
management.server.ssl.enabled-protocols= \# Enabled SSL protocols. Requires a custom management.server.port.  
management.server.ssl.key-alias= \# Alias that identifies the key in the key store. Requires a custom management.server.port.  
management.server.ssl.key-password= \# Password used to access the key in the key store. Requires a custom management.server.port.  
management.server.ssl.key-store= \# Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.server.port.  
management.server.ssl.key-store-password= \# Password used to access the key store. Requires a custom management.server.port.  
management.server.ssl.key-store-provider= \# Provider for the key store. Requires a custom management.server.port.  
management.server.ssl.key-store-type= \# Type of the key store. Requires a custom management.server.port.  
management.server.ssl.protocol=TLS \# SSL protocol to use. Requires a custom management.server.port.  
management.server.ssl.trust-store= \# Trust store that holds SSL certificates. Requires a custom management.server.port.  
management.server.ssl.trust-store-password= \# Password used to access the trust store. Requires a custom management.server.port.  
management.server.ssl.trust-store-provider= \# Provider for the trust store. Requires a custom management.server.port.  
management.server.ssl.trust-store-type= \# Type of the trust store. Requires a custom management.server.port.  
   
\# CLOUDFOUNDRY  
management.cloudfoundry.enabled=true \# Enable extended Cloud Foundry actuator endpoints.  
   management.cloudfoundry.skip-ssl-validation=false \# Skip SSL verification for Cloud Foundry actuator endpoint security calls.  
   
\# ENDPOINTS CORS CONFIGURATION (CorsEndpointProperties)  
management.endpoints.cors.allow-credentials= \# Set whether credentials are supported. When not set, credentials are not supported.  
management.endpoints.cors.allowed-headers= \# Comma-separated list of headers to allow in a request. '\*' allows all headers.  
management.endpoints.cors.allowed-methods= \# Comma-separated list of methods to allow. '\*' allows all methods. When not set, defaults to GET.  
management.endpoints.cors.allowed-origins= \# Comma-separated list of origins to allow. '\*' allows all origins. When not set, CORS support is disabled.  
management.endpoints.cors.exposed-headers= \# Comma-separated list of headers to include in a response.  
management.endpoints.cors.max-age=1800 \# How long, in seconds, the response from a pre-flight request can be cached by clients.  
   
\# ENDPOINTS WEB CONFIGURATION (WebEndpointProperties)  
management.endpoints.web.base-path=/application \# Base path for Web endpoints. Relative to server.context-path or management.server.context-path if management.server.port is configured.  
   
\# ENDPOINTS JMX CONFIGURATION (JmxEndpointExporterProperties)  
management.endpoints.jmx.domain=org.springframework.boot \# Endpoints JMX domain name. Fallback to 'spring.jmx.default-domain' if set.  
management.endpoints.jmx.static-names=false \# Additional static properties to append to all ObjectNames of MBeans representing Endpoints.  
management.endpoints.jmx.unique-names=false \# Ensure that ObjectNames are modified in case of conflict.  
   
\# HEALTH INDICATORS  
management.health.db.enabled=true \# Enable database health check.  
management.health.cassandra.enabled=true \# Enable cassandra health check.  
management.health.couchbase.enabled=true \# Enable couchbase health check.  
management.health.defaults.enabled=true \# Enable default health indicators.  
management.health.diskspace.enabled=true \# Enable disk space health check.  
management.health.diskspace.path= \# Path used to compute the available disk space.  
management.health.diskspace.threshold=0 \# Minimum disk space that should be available, in bytes.  
management.health.elasticsearch.enabled=true \# Enable elasticsearch health check.  
management.health.elasticsearch.indices= \# Comma-separated index names.  
management.health.elasticsearch.response-timeout=100 \# The time, in milliseconds, to wait for a response from the cluster.  
management.health.jms.enabled=true \# Enable JMS health check.  
management.health.ldap.enabled=true \# Enable LDAP health check.  
management.health.mail.enabled=true \# Enable Mail health check.  
management.health.mongo.enabled=true \# Enable MongoDB health check.  
management.health.neo4j.enabled=true \# Enable Neo4j health check.  
management.health.rabbit.enabled=true \# Enable RabbitMQ health check.  
management.health.redis.enabled=true \# Enable Redis health check.  
management.health.solr.enabled=true \# Enable Solr health check.  
management.health.status.http-mapping= \# Mapping of health statuses to HTTP status codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200).  
management.health.status.order=DOWN, OUT\_OF\_SERVICE, UP, UNKNOWN \# Comma-separated list of health statuses in order of severity.  
   
\# INFO CONTRIBUTORS (InfoContributorProperties)  
management.info.build.enabled=true \# Enable build info.  
management.info.defaults.enabled=true \# Enable default info contributors.  
management.info.env.enabled=true \# Enable environment info.  
management.info.git.enabled=true \# Enable git info.  
management.info.git.mode=simple \# Mode to use to expose git information.  
   
\# JOLOKIA (JolokiaProperties)  
management.jolokia.config.\*= \# Jolokia settings. See the Jolokia manual for details.  
management.jolokia.enabled=false \# Enable Jolokia.  
management.jolokia.path=/jolokia \# Path at which Jolokia will be available.  
   
\# TRACING (TraceEndpointProperties)  
management.trace.filter.enabled=true \# Enable the trace servlet filter.  
management.trace.include=request-headers,response-headers,cookies,errors \# Items to be included in the trace.  
   
\# METRICS  
spring.metrics.use-global-registry=true \# Whether or not auto-configured MeterRegistry implementations should be bound to the global static registry on Metrics.  
spring.metrics.export.atlas.batch-size= \# Number of measurements per request to use for the backend. If more measurements are found, then multiple requests will be made.  
spring.metrics.export.atlas.config-refresh-frequency= \# Frequency for refreshing config settings from the LWC service.  
spring.metrics.export.atlas.config-time-to-live= \# Time to live for subscriptions from the LWC service.  
spring.metrics.export.atlas.config-uri= \# URI for the Atlas LWC endpoint to retrieve current subscriptions.  
spring.metrics.export.atlas.connect-timeout= \# Connection timeout for requests to the backend.  
spring.metrics.export.atlas.enabled= \# Enable publishing to the backend.  
spring.metrics.export.atlas.eval-uri= \# URI for the Atlas LWC endpoint to evaluate the data for a subscription.  
spring.metrics.export.atlas.lwc-enabled= \# Enable streaming to Atlas LWC.  
spring.metrics.export.atlas.meter-time-to-live= \# Time to love for meters that do not have any activity. After this period the meter will be considered expired and will not get reported.  
spring.metrics.export.atlas.num-threads= \# Number of threads to use with the metrics publishing scheduler.  
spring.metrics.export.atlas.read-timeout= \# Read timeout for requests to the backend.  
spring.metrics.export.atlas.step=1 \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.atlas.uri= \# URI of the Atlas server.  
spring.metrics.export.datadog.api-key= \# Datadog API key.  
spring.metrics.export.datadog.batch-size= \# Number of measurements per request to use for the backend. If more measurements are found, then multiple requests will be made.  
spring.metrics.export.datadog.connect-timeout= \# Connection timeout for requests to the backend.  
spring.metrics.export.datadog.enabled= \# Enable publishing to the backend.  
spring.metrics.export.datadog.num-threads= \# Number of threads to use with the metrics publishing scheduler.  
spring.metrics.export.datadog.read-timeout= \# Read timeout for requests to the backend.  
spring.metrics.export.datadog.step=1 \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.datadog.uri= \# URI to ship metrics to. If you need to publish metrics to an internal proxy en-route to Datadog, you can define the location of the proxy with this.  
spring.metrics.export.ganglia.addressing-mode= \# UDP addressing mode, either unicast or multicast.  
spring.metrics.export.ganglia.duration-units= \# Base time unit used to report durations.  
spring.metrics.export.ganglia.enabled= \# Enable publishing to Ganglia.  
spring.metrics.export.ganglia.host= \# Host of the Ganglia server to receive exported metrics.  
spring.metrics.export.ganglia.port= \# Port of the Ganglia server to receive exported metrics.  
spring.metrics.export.ganglia.protocol-version= \# Ganglia protocol version. Must be either 3.1 or 3.0.  
spring.metrics.export.ganglia.rate-units= \# Base time unit used to report rates.  
spring.metrics.export.ganglia.step= \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.ganglia.time-to-live= \# Time to live for metrics on Ganglia.  
spring.metrics.export.graphite.duration-units= \# Base time unit used to report durations.  
spring.metrics.export.graphite.enabled= \# Enable publishing to Graphite.  
spring.metrics.export.graphite.host= \# Host of the Graphite server to receive exported metrics.  
spring.metrics.export.graphite.port= \# Port of the Graphite server to receive exported metrics.  
spring.metrics.export.graphite.protocol= \# Protocol to use while shipping data to Graphite.  
spring.metrics.export.graphite.rate-units= \# Base time unit used to report rates.  
spring.metrics.export.graphite.step= \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.influx.batch-size= \# Number of measurements per request to use for the backend. If more measurements are found, then multiple requests will be made.  
spring.metrics.export.influx.compressed= \# Enable GZIP compression of metrics batches published to Influx.  
spring.metrics.export.influx.connect-timeout= \# Connection timeout for requests to the backend.  
spring.metrics.export.influx.consistency= \# Write consistency for each point.  
spring.metrics.export.influx.db= \# Tag that will be mapped to "host" when shipping metrics to Influx. Can be omitted of host should be omitted on publishing.  
spring.metrics.export.influx.enabled= \# Enable publishing to the backend.  
spring.metrics.export.influx.num-threads= \# Number of threads to use with the metrics publishing scheduler.  
spring.metrics.export.influx.password= \# Login password of the Influx server.  
spring.metrics.export.influx.read-timeout= \# Read timeout for requests to the backend.  
spring.metrics.export.influx.retention-policy= \# Retention policy to use (Influx writes to the DEFAULT retention policy if one is not specified).  
spring.metrics.export.influx.step=1 \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.influx.uri= \# URI of the Influx server.  
spring.metrics.export.influx.user-name= \# Login user of the Influx server.  
spring.metrics.export.prometheus.descriptions= \# Enable publishing descriptions as part of the scrape payload to Prometheus. Turn this off to minimize the amount of data sent on each scrape.  
spring.metrics.export.prometheus.enabled= \# Enable publishing to Prometheus.  
spring.metrics.export.prometheus.step= \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.simple.enabled=false \# Enable publishing to the backend.  
spring.metrics.export.simple.step=10 \# Step size (i.e. reporting frequency) to use.  
spring.metrics.export.statsd.enabled= \# Export metrics to StatsD.  
spring.metrics.export.statsd.flavor= \# StatsD line protocol to use.  
spring.metrics.export.statsd.host=localhost \# Host of the StatsD server to receive exported metrics.  
spring.metrics.export.statsd.max-packet-length=1400 \# Total length of a single payload should be kept within your network's MTU.  
spring.metrics.export.statsd.polling-frequency=10 \# How often gauges will be polled. When a gauge is polled, its value is recalculated and if the value has changed, it is sent to the StatsD server.  
spring.metrics.export.statsd.port=8125 \# Port of the StatsD server to receive exported metrics.  
spring.metrics.export.statsd.queue-size= \# Maximum size of the queue of items waiting to be sent to the StatsD server.  
spring.metrics.jdbc.datasource-metric-name=data.source \# Name of the metric for data source usage.  
spring.metrics.jdbc.instrument-datasource=true \# Instrument all available data sources.  
spring.metrics.web.client.record-request-percentiles=false \# Whether or not instrumented requests record percentiles histogram buckets by default.  
spring.metrics.web.client.requests-metric-name=http.client.requests \# Name of the metric for sent requests.  
spring.metrics.web.server.auto-time-requests=true \# Whether or not requests handled by Spring MVC or WebFlux should be automatically timed.  
spring.metrics.web.server.record-request-percentiles=false \# Whether or not instrumented requests record percentiles histogram buckets by default.  
spring.metrics.web.server.requests-metric-name=http.server.requests \# Name of the metric for received requests.  
   
   
   
\# ----------------------------------------  
\# DEVTOOLS PROPERTIES  
\# ----------------------------------------  
   
\# DEVTOOLS (DevToolsProperties)  
spring.devtools.livereload.enabled=true \# Enable a livereload.com compatible server.  
spring.devtools.livereload.port=35729 \# Server port.  
spring.devtools.restart.additional-exclude= \# Additional patterns that should be excluded from triggering a full restart.  
spring.devtools.restart.additional-paths= \# Additional paths to watch for changes.  
spring.devtools.restart.enabled=true \# Enable automatic restart.  
spring.devtools.restart.exclude=META-INF/maven/\*\*,META-INF/resources/\*\*,resources/\*\*,static/\*\*,public/\*\*,templates/\*\*,\*\*/\*Test.class,\*\*/\*Tests.class,git.properties \# Patterns that should be excluded from triggering a full restart.  
spring.devtools.restart.poll-interval=1000 \# Amount of time (in milliseconds) to wait between polling for classpath changes.  
spring.devtools.restart.quiet-period=400 \# Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered.  
spring.devtools.restart.trigger-file= \# Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart.  
   
\# REMOTE DEVTOOLS (RemoteDevToolsProperties)  
spring.devtools.remote.context-path=/.~~spring-boot!~ \# Context path used to handle the remote connection.  
spring.devtools.remote.proxy.host= \# The host of the proxy to use to connect to the remote application.  
spring.devtools.remote.proxy.port= \# The port of the proxy to use to connect to the remote application.  
spring.devtools.remote.restart.enabled=true \# Enable remote restart.  
spring.devtools.remote.secret= \# A shared secret required to establish a connection (required to enable remote support).  
spring.devtools.remote.secret-header-name=X-AUTH-TOKEN \# HTTP header used to transfer the shared secret.  
  
   
\# ----------------------------------------  
\# TESTING PROPERTIES  
\# ----------------------------------------  
spring.test.database.replace=any \# Type of existing DataSource to replace.  
spring.test.mockmvc.print=default \# MVC Print option.

\#pagehelper分页插件配置  
pagehelper.helperDialect=mysql  
pagehelper.reasonable=true  
pagehelper.supportMethodsArguments=true  
pagehelper.params=count=countSql

# 参考： #

[https://blog.csdn.net/fly\_leopard/article/details/78498804][https_blog.csdn.net_fly_leopard_article_details_78498804]

[https_docs.spring.io_spring-boot_docs_2.3.1.RELEASE_reference_htmlsingle_application-properties.data.spring.datasource.hikari]: https://docs.spring.io/spring-boot/docs/2.3.1.RELEASE/reference/htmlsingle/#application-properties.data.spring.datasource.hikari
[https_docs.spring.io_spring-boot_docs_current-SNAPSHOT_reference_htmlsingle]: https://docs.spring.io/spring-boot/docs/current-SNAPSHOT/reference/htmlsingle/
[https_docs.spring.io_spring-boot_docs_current_reference_htmlsingle_common-application-properties]: https://docs.spring.io/spring-boot/docs/current/reference/htmlsingle/#common-application-properties
[Link 1]: https://www.cnblogs.com/michael-xiang/p/10747934.html#3607015439
[Link 2]: https://www.cnblogs.com/michael-xiang/p/10747934.html#1344465054
[https_docs.spring.io_spring-boot_docs_2.3.1.RELEASE_reference_htmlsingle_data-properties]: https://docs.spring.io/spring-boot/docs/2.3.1.RELEASE/reference/htmlsingle/#data-properties
[https_blog.csdn.net_fly_leopard_article_details_78498804]: https://blog.csdn.net/fly_leopard/article/details/78498804