kerberos认证Flink的kafka connector和kafka client配置

清疚 2024-03-23 17:59 85阅读 0赞

![在这里插入图片描述][f86d903a6bed44a88075d56a273ae6de.png]

### 一、flink-connector-kakfa ###

#### 1. kafka配置文件 ####

kafka jaas必须配置，如果缺少，则报一下错误。

Caused by: java.lang.IllegalArgumentException: Could not find a 'KafkaClient' entry in the JAAS configuration. System property 'java.security.auth.login.config' is not set

对于Flink只能通过配置`java.security.auth.login.config`的方式。

jaas配置

#### 1.1 方式一： ####

System.setProperty配置系统变量：

System.setProperty("java.security.auth.login.config", "D:\\configs\\kafka_client_jaas_keytab.conf");

kafka\_client\_jaas\_keytab.conf文件内容如下：

KafkaClient {
    com.sun.security.auth.module.Krb5LoginModule required
        useKeyTab = true   
        useTicketCache=false
        storeKey = true
        keyTab="D://configs//xxx.keytab"
        principal="xxx@XXXXXX.COM"
        serviceName="kafka";
    };

#### 1.2 方法二：在IDEA中添加jvm参数： ####

-Djava.security.auth.login.config=D:\\configs\\kafka_client_jaas_keytab.conf

![在这里插入图片描述][bc9e62b1c74b452cb9c7614614599392.png]

注意：将参数添加至kafka 的properties中是错误的。如下：

Properties properties = new Properties();
    properties.setProperty("java.security.auth.login.config", "D:\\configs\\kafka_client_jaas_keytab.conf");
    FlinkKafkaProducer<String> producer = new FlinkKafkaProducer<>(topic, simpleStringSchema, properties);

#### 2 配置Flink kerberos ####

##### 2.1 Idea中配置jvm环境变量 #####

idea配置

-Dsecurity.kerberos.krb5-conf.path=D:\configs\krb5.conf -Dsecurity.kerberos.login.keytab=D:\configs\xxx.keytab -Dsecurity.kerberos.login.principal=xxx@XXXXXX.COM

##### 2.2 传递stream env #####

直接传递参数给flink StreamExecutionEnvironment

Properties flinkProps = new Properties();
            flinkProps.setProperty("security.kerberos.krb5-conf.path", "D:\\configs\\krb5.conf");
            flinkProps.setProperty("security.kerberos.login.keytab", "D:\\configs\\xxx.keytab");
            flinkProps.setProperty("security.kerberos.login.principal", "xxx@XXXXXX.COM");
            flinkProps.setProperty("security.kerberos.login.contexts", "Client,KafkaClient");
            flinkProps.setProperty("state.backend", "hashmap");
            // Configuration flinkConfig = ConfigUtils.getFlinkConfig();
            Configuration flinkConfig = new Configuration();
            flinkConfig.addAllToProperties(flinkProps);
            StreamExecutionEnvironment senv = StreamExecutionEnvironment.getExecutionEnvironment(flinkConfig);

#### 3. 查看是否连接成功 ####

kafka连接成功可以看到如下日志内容：

09:38:26.473 [Sink: Unnamed (6/8)#0] INFO  org.apache.kafka.common.security.authenticator.AbstractLogin - Successfully logged in.
    ... ...
    09:38:27.534 [kafka-producer-network-thread | producer-3] INFO  org.apache.kafka.clients.Metadata - [Producer clientId=producer-3] Cluster ID: vj0AfElIS12S0Cp0WDBU7Q
    ... ...
    09:38:27.618 [kafka-kerberos-refresh-thread-xxx@XXXXXX.COM] WARN  org.apache.kafka.common.security.kerberos.KerberosLogin - [Principal=xxx@XXXXXX.COM]: TGT renewal thread has been interrupted and will exit.

#### 4. 配置成cache是不行的。 ####

注意：设置成如下cache格式的，是不行的。  
虽然flink已经设置了kerberos的principal和keytab 。

System.setProperty("java.security.auth.login.config", "D:\\configs\\kafka_client_jaas_cache.conf");

kafka\_client\_jaas\_cache.conf文件内容：

KafkaClient {
    com.sun.security.auth.module.Krb5LoginModule required
    useTicketCache=true
    renewTicket=true
    serviceName="kafka";
    };

会报如下错误：

Caused by: org.apache.kafka.common.KafkaException: javax.security.auth.login.LoginException: Could not login: the client is being asked for a password, but the Kafka client code does not currently support obtaining a password from the user. not available to garner  authentication information from the user

附代码：

@Test
        public void testWrite() throws Exception {
        
    // jvm配置：-Dsecurity.kerberos.krb5-conf.path=D:\configs\krb5.conf -Dsecurity.kerberos.login.keytab=D:\configs\xxx.keytab -Dsecurity.kerberos.login.principal=xxx@XXXXXX.COM 
    // System.setProperty("java.security.auth.login.config", "D:\\configs\\kafka_client_jaas_keytab.conf");
            Properties flinkProps = new Properties();
            flinkProps.setProperty("security.kerberos.krb5-conf.path", "D:\\configs\\krb5.conf");
            flinkProps.setProperty("security.kerberos.login.keytab", "D:\\configs\\xxx.keytab");
            flinkProps.setProperty("security.kerberos.login.principal", "xxx@XXXXXX.COM");
            flinkProps.setProperty("security.kerberos.login.contexts", "Client,KafkaClient");
            flinkProps.setProperty("state.backend", "hashmap");
    
            // Configuration flinkConfig = ConfigUtils.getFlinkConfig();
            Configuration flinkConfig = new Configuration();
            flinkConfig.addAllToProperties(flinkProps);
            StreamExecutionEnvironment senv = StreamExecutionEnvironment.getExecutionEnvironment(flinkConfig);
    
            Properties properties = new Properties();
            properties.setProperty(CommonClientConfigs.BOOTSTRAP_SERVERS_CONFIG, "xxx06.xxx.com:6667,xxx07.xxx.com:6667,xxx08.xxx.com:6667");
            properties.setProperty(CommonClientConfigs.SECURITY_PROTOCOL_CONFIG, "SASL_PLAINTEXT");
            properties.setProperty(SaslConfigs.SASL_MECHANISM, "GSSAPI");
            properties.setProperty(SaslConfigs.SASL_KERBEROS_SERVICE_NAME, "kafka");
            // flink-connector-kafka api中错误配置jaas的方法：properties.setProperty(SaslConfigs.SASL_JAAS_CONFIG,String.format(JAAS_CONFIG_KEYTAB_TEMPLATE, "D:\\configs\\xxx.keytab", "xxx@XXXXXX.COM"));
            String topic = "flinkcdc";
            SimpleStringSchema simpleStringSchema = new SimpleStringSchema();
            FlinkKafkaProducer<String> producer = new FlinkKafkaProducer<>(topic, simpleStringSchema, properties);
            senv.fromElements("hello world", "coming again").addSink(producer);
            senv.execute("test");
        }

### 二、kafka-client方式 ###

#### 1. kafka 的jaas配置 ####

配置 java的 `java.security.auth.login.config` 或者 kafka 的`sasl.jaas.config` 都是可以的。  
但注意jaas配置优先级  
sasl.jaas.config > java.security.auth.login.config  
所以如果配置了 sasl.jaas.config， 就会导致 java.security.auth.login.config 失效

上代码：  
首先需要注意`sasl.jaas.config` 中的路径分隔符不能是 `\\` 必须是 `/`：

错误的：
    D:\\configs\\kafka_client_jaas_keytab.conf
    正确的：
    D:/configs/kafka_client_jaas_keytab.conf

private static final String JAAS_CONFIG_KEYTAB_TEMPLATE =
                "com.sun.security.auth.module.Krb5LoginModule required\n" +
                        "debug=true\n" +
                        "doNotPrompt=true\n" +
                        "storeKey=true\n" +
                        "useKeyTab=true\n" +
                        "keyTab=\"%s\"\n" +
                        "principal=\"%s\";";
    
        @Test
        public void testKafkaWrite() {
        
            Properties properties = new Properties();
            properties.setProperty(CommonClientConfigs.BOOTSTRAP_SERVERS_CONFIG, "xxx06.xxx.com:6667,xxx07.xxx.com:6667,xxx08.xxx.com:6667");
            properties.setProperty(CommonClientConfigs.SECURITY_PROTOCOL_CONFIG, "SASL_PLAINTEXT");
            properties.setProperty(SaslConfigs.SASL_MECHANISM, "GSSAPI");
            properties.setProperty(SaslConfigs.SASL_KERBEROS_SERVICE_NAME, "kafka");
            properties.setProperty(ProducerConfig.KEY_SERIALIZER_CLASS_CONFIG, StringSerializer.class.getName());
            properties.setProperty(ProducerConfig.VALUE_SERIALIZER_CLASS_CONFIG, StringSerializer.class.getName());
    // 以下二者选其中之一就可以了。
            System.setProperty("java.security.auth.login.config", "D:\\configs\\kafka_client_jaas_keytab.conf");
            // properties.setProperty(SaslConfigs.SASL_JAAS_CONFIG, String.format(JAAS_CONFIG_KEYTAB_TEMPLATE, "D:/configs/xxx.keytab", "xxx@XXXXXX.COM"));
            try {
        
                KafkaProducer<String, String> producer = new KafkaProducer<>(properties);
                ProducerRecord<String, String> record1 = new ProducerRecord<>("flinkcdc", "hello kafka");
                ProducerRecord<String, String> record2 = new ProducerRecord<>("flinkcdc", "coming soon");
                Future<RecordMetadata> f1 = producer.send(record1);
                Future<RecordMetadata> f2 = producer.send(record2);
    
                producer.flush();
                List<Future<RecordMetadata>> fs = new ArrayList<>();
                fs.add(f1);
                fs.add(f2);
                for (Future<RecordMetadata> future : fs) {
        
                    RecordMetadata metadata = future.get();
                    System.out.println(metadata.toString());
                }
            } catch (Exception e) {
        
                throw new RuntimeException(e);
            }
        }

kafka\_client\_jaas\_keytab.conf 文件内容和flink-conector-kakfka的一样。

### 三、kafka console 启动命令 ###

console producer启动命令：

bin/kafka-console-producer.sh --bootstrap-server xxx06.xxx.com:6667,xxx07.xxx.com:6667,xxx08.xxx.com:6667 --topic flinkcdc --producer-property security.protocol=SASL_PLAINTEXT

console consumer启动命令：

bin/kafka-console-consumer.sh --bootstrap-server xxx06.xxx.com:6667,xxx07.xxx.com:6667,xxx08.xxx.com:6667 --topic flinkcdc --from-beginning  --consumer-property security.protocol=SASL_PLAINTEXT --group tester

[f86d903a6bed44a88075d56a273ae6de.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/14/09e59fe9c3e94637a109fc3a40600cf2.png
[bc9e62b1c74b452cb9c7614614599392.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/14/a4af2f02d4b140a993a6886c019b6e1a.png