App启动流程分析（一）

落日映苍穹つ 2023-10-12 22:00 62阅读 0赞

#### 一、App启动涉及到的三个进程 ####

**1、Launcher进程**：负责接收用户点击屏幕的事件，它其实就是一个Activity，屏幕上的各种Icon就是这个Activity中的Button，当点击Icon时，会触发启动App的流程。  
**2、SystemServer进程**：它是属于Application Framework层的，在SystemServer中启动了非常多的服务（例如：AMS、PMS、WMS等），这些服务都交给SystemServiceManager来管理。  
**3、App进程**：需要启动的App进程  
**4、Zygote进程**：fork App进程的进程

#### 二、App启动所涉及到几个大类 ####

**1、ActivityManagerService（AMS）**：AMS主要负责系统中四大组件的启动、切换、调度及应用进程的管理和调度等工作，它本身也是一个Binder类。

**2、Instrumentation**：监控应用程序和系统的交互（每个Activity都会持有一个Instrumentation引用，整个进程只会有一个Instrumentation的实例，它主要是完成对Applicaiton和Activity初始化和生命周期的工具类）  
**3、ActivityThread**：应用程序的入口类，通过调用main方法，开启消息循环队列。  
**4、ApplicationThread**：ApplicationThread提供Binder通讯接口，AMS则通过代理调用此App进程的本地方法。  
**5、ActivityManager**：客户端使用的是ActivityManager类，其内部通过调用ActivityManagerNative.getDefault()得到一个ActivityManagerProxy对象，通过它与ActivityManagerService进行通信。（*注：Android8.0及8.0以上系统AMS不再通过ActivityManagerNative.getDefault()获取AMS的代理对象，而是通过IActivityManager*）  
**6、ActivityManagerProxy**：AMS服务在当前进程中的代理类，负责与AMS通信。  
**7、ApplicationThreadProxy**：ApplicaitonThread在AMS服务中的代理类，负责与ApplicationThread通信。

#### 三、App启动流程概述 ####

![在这里插入图片描述][250075b9320441ceb867050a50e5f5d2.png]或者也可以看这个简单点的图：

![在这里插入图片描述][2eb316b023214cb6a6ed8d046a1039ac.png]

**第1步**：点击桌面图标，Launcher进程会采用Binder IPC（Inner-Process Communication）向system\_server进程发起startActivity请求。

**第2步**：system\_server进程接收到请求后，向zygote进程发送创建进程的请求。

**第3步**：Zygote进程fork出新的子进程，即App进程。

**第4步**：App进程创建之后，ActivityThread类的main方法会作为程序的入口执行，在ActivityThread的main方法中，会通过Binder IPC向system\_server进程发起attachApplication的请求。

**第5步**：system\_server进程在收到请求后，进行一系列的方法调用后，再通过Binder IPC向App进程发送bindApplication；

**第6步**：App进程的Binder线程（ApplicaitonThread）在收到bindApplication请求后，会通过Handler向主线程发送H.BIND\_APPLICATION消息。在主线程收到H.BIND\_APPLICATION的Handler消息后，会调用ActivityThread类中的handleBindApplication方法，完成Application的创建并回调Applicaiton.onCreate()

*（注意：因为App进程与system\_server进程通信是通过Binder实现的，Binder会开辟Binder线程池，那么此时这个方法的调用是在子线程中完成的，像bindApplicaiton最终需要调用Applicaiton的onCreate方法，但是这个方法是在主线程中，因此需要Handler完成线程切换）*

\*（Binder线程池是Android系统中的一个线程池，用于处理跨进程（IPC）的请求。由于跨进程通信可能涉及到耗时的操作，如果在主线程中处理这些请求，会导致主线程被阻塞，影响应用的响应性能。因此，Android系统引入了Binder线程池来将跨进程通信的处理分离到独立的工作线程中，以保证主线程的流畅运行。

Binder线程池的大小是有限的，并且会根据系统的配置和负载动态调整。它可以同时处理多个Binder请求，通过将请求分发给空闲的工作线程来实现并发处理。这样可以提高跨进程通信的效率和吞吐量）\*

**第7步**：在上述第5步的system\_server进程在收到请求后，除了通过Binder IPC 向App进程发送bindApplication外，还会发送scheduleTransaction.

**第8步**：App进程在收到scheduleTransaction的请求后，会通过Handler向主线程发送H.EXECUTE\_TRANSACTION的Handler消息。在主线程收到H.EXECUTE\_TRANSACTION的Handler消息后，会调用ActivityThread类的handleLaunchActivity方法，从而完成App中起始Activity的创建并回调Activity.onCreate()

> 注：以上步骤中**第2步，system\_server进程与Zygote进程的通信** 以及  
> **第3步，Zygote进程fork出App进程** 是以Socket方式 进行的通信；而L**auncher进程、system\_server进程、App进程**间的通信是以Binder IPC方式通信的。

#### 四、App启动流程源码剖析（该启动流程源码分析基于Android33） ####

关于App启动流程的分析，我们从Launcher进程开始

##### 1、Launcher进程 #####

首先，Launcher进程是Zygote进程fork出的一个进程，我们看到的手机桌面可以认为是Launcher进程中的一个Activity，即LauncherActivity，而桌面上的每一个Icon可以看作是这个LauncherActivity中的一个个的Button，用户点击桌面上App Icon的行为其实就是点击LauncherActivity中的Icon。

> 那么Launcher进程是什么时候启动的呢？

我们知道除了Launcher进程之外，还有一个很重要的进程就是SystemServer进程，而SystemServer进程是Zygote进程fork出的第一个进程，SystemServer进程在启动的过程中会启动PMS（PackageManagerService）、AMS、WMS等，PMS启动后会将系统中的应用程序安装完成，先前已经启动的AMS会将Launcher启动起来。

首先看下SystemServer进程的main方法，这里是SystemServer进程的入口函数：

public static void main(String[] args) {
        
            new SystemServer().run();
        }

而在SystemServer的run方法中，启动了很多Service服务：

private void run() {
        
    		.....
    		
     		try {
        
                t.traceBegin("StartServices");
                startBootstrapServices(t);
                startCoreServices(t);
                startOtherServices(t);
                startApexServices(t);
            } catch (Throwable ex) {
        
                Slog.e("System", "******************************************");
                Slog.e("System", "************ Failure starting system services", ex);
                throw ex;
            } finally {
        
                t.traceEnd(); // StartServices
            }
            
    		.....
        }

其中有调用startOtherServices()方法，在startOtherServices()方法中，调用了AMS的systemReady()方法，此即为Launcher的入口，如下所示：

private void startOtherServices() {
        
        ...
    
        mActivityManagerService.systemReady(() -> {
        
            Slog.i(TAG, "Making services ready");
            traceBeginAndSlog("StartActivityManagerReadyPhase");
            mSystemServiceManager.startBootPhase(
                    SystemService.PHASE_ACTIVITY_MANAGER_READY);
    
            ...
            }
        ...
    }

再来看下AMS的systemReady()方法：

public void systemReady(final Runnable goingCallback, TimingsTraceLog traceLog) {
        
        ...
    
        synchronized (this) {
        
            ...
            mStackSupervisor.resumeFocusedStackTopActivityLocked();
            mUserController.sendUserSwitchBroadcasts(-1, currentUserId);
    
            ...
        }
    }

这里逻辑比较长，就不一一赘述了，只需要知道这里是Launcher的入口，最后会通过AMS把LauncherActivity启动起来，再来看下LauncherActivity：

public abstract class LauncherActivity extends ListActivity {
        
    
    	.....
    	
    	@Override
        protected void onListItemClick(ListView l, View v, int position, long id) {
        
            Intent intent = intentForPosition(position);
            startActivity(intent);
        }
        
    	.....
    }

可以看到LauncherActivity是继承于ListActivity的,并且有onListItemClick的回调方法，而这里的回调就是点击桌面Icon的回调，那么在收到点击桌面icon的回调后，调用了startActivity去执行启动Activity的流程了。

这里注意一下获取Intent的方法，IntentForPosition：

public Intent intentForPosition(int position) {
        
                if (mActivitiesList == null) {
        
                    return null;
                }
    
                Intent intent = new Intent(mIntent);
                ListItem item = mActivitiesList.get(position);
                intent.setClassName(item.packageName, item.className);
                if (item.extras != null) {
        
                    intent.putExtras(item.extras);
                }
                return intent;
            }

再回到上面调用startActivity的地方，这里调用的是Activity\#startActivity方法：

@Override
        public void startActivity(Intent intent, @Nullable Bundle options) {
        
            getAutofillClientController().onStartActivity(intent, mIntent);
            if (options != null) {
        
                startActivityForResult(intent, -1, options);
            } else {
        
                // Note we want to go through this call for compatibility with
                // applications that may have overridden the method.
                startActivityForResult(intent, -1);
            }
        }

接着，Activity\#startActivity方法会调用Activity\#startActivityForResult方法：

public void startActivityForResult(@RequiresPermission Intent intent, int requestCode,
                @Nullable Bundle options) {
        
            if (mParent == null) {
        
                options = transferSpringboardActivityOptions(options);
                Instrumentation.ActivityResult ar =
                    mInstrumentation.execStartActivity(
                        this, mMainThread.getApplicationThread(), mToken, this,
                        intent, requestCode, options);
                        
                ......
            }
        }

注意上面重要的一行代码调用Instrumentation\#execStartActivity方法：

public ActivityResult execStartActivity(
                Context who, IBinder contextThread, IBinder token, Activity target,
                Intent intent, int requestCode, Bundle options) {
        
    	.....
    	 try {
        
                intent.migrateExtraStreamToClipData(who);
                intent.prepareToLeaveProcess(who);
                int result = ActivityTaskManager.getService().startActivity(whoThread,
                        who.getOpPackageName(), who.getAttributionTag(), intent,
                        intent.resolveTypeIfNeeded(who.getContentResolver()), token,
                        target != null ? target.mEmbeddedID : null, requestCode, 0, null, options);
                checkStartActivityResult(result, intent);
            } catch (RemoteException e) {
        
                throw new RuntimeException("Failure from system", e);
            }
            return null;
                
    }
    
    
    public static IActivityTaskManager getService() {
        
        return IActivityTaskManagerSingleton.get();
    }
    //获取单例
    @UnsupportedAppUsage(trackingBug = 129726065)
    private static final Singleton<IActivityTaskManager> IActivityTaskManagerSingleton =
            new Singleton<IActivityTaskManager>() {
        
                @Override
                protected IActivityTaskManager create() {
        
                    final IBinder b = ServiceManager.getService(Context.ACTIVITY_TASK_SERVICE);
                    return IActivityTaskManager.Stub.asInterface(b);
                }
            };

然后，在Instrumentation\#execStartActivity方法中，通过ActivityTaskManager.getService()获取到ActivityTaskManagerService对象（**注：这里从Launcher进程调用到了SystemServer进程中的方法，通过Binder IPC通信**），然后调用ActivityTaskManagerService的startActivity方法：

@Override
        public final int startActivity(IApplicationThread caller, String callingPackage,
                String callingFeatureId, Intent intent, String resolvedType, IBinder resultTo,
                String resultWho, int requestCode, int startFlags, ProfilerInfo profilerInfo,
                Bundle bOptions) {
        
            return startActivityAsUser(caller, callingPackage, callingFeatureId, intent, resolvedType,
                    resultTo, resultWho, requestCode, startFlags, profilerInfo, bOptions,
                    UserHandle.getCallingUserId());
        }

然后调用ActivityTaskManagerService\#startActivity方法又调用了然后调用ActivityTaskManagerService的startActivityAsUser方法：

private int startActivityAsUser(IApplicationThread caller, String callingPackage,
                @Nullable String callingFeatureId, Intent intent, String resolvedType,
                IBinder resultTo, String resultWho, int requestCode, int startFlags,
                ProfilerInfo profilerInfo, Bundle bOptions, int userId, boolean validateIncomingUser) {
        
    
    			.....
    			
            return getActivityStartController().obtainStarter(intent, "startActivityAsUser")
                    .setCaller(caller)
                    .setCallingPackage(callingPackage)
                    .setCallingFeatureId(callingFeatureId)
                    .setResolvedType(resolvedType)
                    .setResultTo(resultTo)
                    .setResultWho(resultWho)
                    .setRequestCode(requestCode)
                    .setStartFlags(startFlags)
                    .setProfilerInfo(profilerInfo)
                    .setActivityOptions(bOptions)
                    .setUserId(userId)
                    .execute();
                }

由上面代码可以看出这里通过getActivityStartController()得到ActivityStartController，并且调用ActivityStartController\#obtainStarter方法得到ActivityStarter：

ActivityStarter obtainStarter(Intent intent, String reason) {
        
            return mFactory.obtain().setIntent(intent).setReason(reason);
        }

再看ActivityStarter的execute方法：

int execute() {
        
            try {
        
                  ...
                  res = executeRequest(mRequest);
            } finally {
        
                onExecutionComplete();
            }
        }
    
    private int executeRequest(Request request) {
        
            ...
            //各种权限检查
            boolean abort = !mSupervisor.checkStartAnyActivityPermission(intent, aInfo, resultWho,
                    requestCode, callingPid, callingUid, callingPackage, callingFeatureId,
                    request.ignoreTargetSecurity, inTask != null, callerApp, resultRecord,
                    resultRootTask);
            abort |= !mService.mIntentFirewall.checkStartActivity(intent, callingUid,
                    callingPid, resolvedType, aInfo.applicationInfo);
            abort |= !mService.getPermissionPolicyInternal().checkStartActivity(intent, callingUid,
                    callingPackage);
            ...
            mLastStartActivityResult = startActivityUnchecked(r, sourceRecord, voiceSession,
                    request.voiceInteractor, startFlags, true /* doResume */, checkedOptions, inTask,
                    restrictedBgActivity, intentGrants);
            if (request.outActivity != null) {
        
                request.outActivity[0] = mLastStartActivityRecord;
            }
    
            return mLastStartActivityResult;
        }
    
        private int startActivityUnchecked(final ActivityRecord r, ActivityRecord sourceRecord,
                    IVoiceInteractionSession voiceSession, IVoiceInteractor voiceInteractor,
                    int startFlags, boolean doResume, ActivityOptions options, Task inTask,
                    boolean restrictedBgActivity, NeededUriGrants intentGrants) {
        
            ...
            try {
        
                mService.deferWindowLayout();
                Trace.traceBegin(Trace.TRACE_TAG_WINDOW_MANAGER, "startActivityInner");
                result = startActivityInner(r, sourceRecord, voiceSession, voiceInteractor,
                        startFlags, doResume, options, inTask, restrictedBgActivity, intentGrants);
            } finally {
        
            ....
            }
            ...
            return result;
        }
    
        int startActivityInner(final ActivityRecord r, ActivityRecord sourceRecord,
                IVoiceInteractionSession voiceSession, IVoiceInteractor voiceInteractor,
                int startFlags, boolean doResume, ActivityOptions options, Task inTask,
                boolean restrictedBgActivity, NeededUriGrants intentGrants) {
        
            setInitialState(r, options, inTask, doResume, startFlags, sourceRecord, voiceSession,
                    voiceInteractor, restrictedBgActivity);
    
            ...
            if (mDoResume) {
        //mDoResume=true
                final ActivityRecord topTaskActivity =
                        mStartActivity.getTask().topRunningActivityLocked();
                if (!mTargetRootTask.isTopActivityFocusable()
                        || (topTaskActivity != null && topTaskActivity.isTaskOverlay()
                        && mStartActivity != topTaskActivity)) {
        //此处false
                    // If the activity is not focusable, we can't resume it, but still would like to
                    // make sure it becomes visible as it starts (this will also trigger entry
                    // animation). An example of this are PIP activities.
                    // Also, we don't want to resume activities in a task that currently has an overlay
                    // as the starting activity just needs to be in the visible paused state until the
                    // over is removed.
                    // Passing {@code null} as the start parameter ensures all activities are made
                    // visible.
                    mTargetRootTask.ensureActivitiesVisible(null /* starting */,
                            0 /* configChanges */, !PRESERVE_WINDOWS);
                    // Go ahead and tell window manager to execute app transition for this activity
                    // since the app transition will not be triggered through the resume channel.
                    mTargetRootTask.mDisplayContent.executeAppTransition();
                } else {
        
             
                    // If the target root-task was not previously focusable (previous top running
                    // activity on that root-task was not visible) then any prior calls to move the
                    // root-task to the will not update the focused root-task.  If starting the new
                    // activity now allows the task root-task to be focusable, then ensure that we
                    // now update the focused root-task accordingly.
                    if (mTargetRootTask.isTopActivityFocusable()
                            && !mRootWindowContainer.isTopDisplayFocusedRootTask(mTargetRootTask)) {
        
                        mTargetRootTask.moveToFront("startActivityInner");
                    }
                    mRootWindowContainer.resumeFocusedTasksTopActivities(
                            mTargetRootTask, mStartActivity, mOptions, mTransientLaunch);
                }
            }
            ...
            return START_SUCCESS;
        }

最终调用了RootWindowContainer的resumeFocusedTasksTopActivities方法：

boolean resumeFocusedTasksTopActivities(
                Task targetRootTask, ActivityRecord target, ActivityOptions targetOptions,
                boolean deferPause) {
        
            ...
            final Task focusedRoot = display.getFocusedRootTask();
            if (focusedRoot != null) {
        
                result |= focusedRoot.resumeTopActivityUncheckedLocked(target, targetOptions);
            } else if (targetRootTask == null) {
        
                result |= resumeHomeActivity(null /* prev */, "no-focusable-task",
                        display.getDefaultTaskDisplayArea());
            }
            return result;
        }

RootWindowContainer：根部WindowContainer，一切WindowContainer的管理者。

然后调用了Taks.resumeTopActivityUnCheckedLocked方法：

boolean resumeTopActivityUncheckedLocked(ActivityRecord prev, ActivityOptions options) {
        
            return resumeTopActivityUncheckedLocked(prev, options, false /* skipPause */);
        }
    
     	boolean resumeTopActivityUncheckedLocked(ActivityRecord prev, ActivityOptions options,
                boolean deferPause) {
        
              ...
              if (isFocusableAndVisible()) {
        
                  someActivityResumed = resumeTopActivityInnerLocked(prev, options, deferPause);
             }
            return someActivityResumed;
        }
    
        private boolean resumeTopActivityInnerLocked(ActivityRecord prev, ActivityOptions options,
                boolean deferPause) {
        
            ....
            final boolean[] resumed = new boolean[1];
            final TaskFragment topFragment = topActivity.getTaskFragment();
            resumed[0] = topFragment.resumeTopActivity(prev, options, deferPause);
            forAllLeafTaskFragments(f -> {
        
                if (topFragment == f) {
        
                    return;
                }
                if (!f.canBeResumed(null /* starting */)) {
        
                    return;
                }
                resumed[0] |= f.resumeTopActivity(prev, options, deferPause);
            }, true);
            return resumed[0];
    }

紧接着调用了TaskFragment的resumeTopActivity方法：

final boolean resumeTopActivity(ActivityRecord prev, ActivityOptions options,
                boolean deferPause) {
        
            ActivityRecord next = topRunningActivity(true /* focusableOnly */);
            if (next == null || !next.canResumeByCompat()) {
        
                return false;
            }
            
          	.......
    		mTaskSupervisor.startSpecificActivity(next, true, true);
     		.......
    }

紧接着调用了ActivityTaskSupervisor.startSpecificActivity方法：

void startSpecificActivity(ActivityRecord r, boolean andResume, boolean checkConfig) {
        
         					......
    
                    // Create activity launch transaction.
                    final ClientTransaction clientTransaction = ClientTransaction.obtain(
                            proc.getThread(), r.token);
    
                    final boolean isTransitionForward = r.isTransitionForward();
                    final IBinder fragmentToken = r.getTaskFragment().getFragmentToken();
                    clientTransaction.addCallback(LaunchActivityItem.obtain(new Intent(r.intent),
                            System.identityHashCode(r), r.info,
                            // TODO: Have this take the merged configuration instead of separate global
                            // and override configs.
                            mergedConfiguration.getGlobalConfiguration(),
                            mergedConfiguration.getOverrideConfiguration(), r.compat,
                            r.getFilteredReferrer(r.launchedFromPackage), task.voiceInteractor,
                            proc.getReportedProcState(), r.getSavedState(), r.getPersistentSavedState(),
                            results, newIntents, r.takeOptions(), isTransitionForward,
                            proc.createProfilerInfoIfNeeded(), r.assistToken, activityClientController,
                            r.shareableActivityToken, r.getLaunchedFromBubble(), fragmentToken));
    
                    // Set desired final state.
                    final ActivityLifecycleItem lifecycleItem;
                    if (andResume) {
        
                        lifecycleItem = ResumeActivityItem.obtain(isTransitionForward);
                    } else {
        
                        lifecycleItem = PauseActivityItem.obtain();
                    }
                    clientTransaction.setLifecycleStateRequest(lifecycleItem);
    
                    // Schedule transaction.
                    mService.getLifecycleManager().scheduleTransaction(clientTransaction);
    
                    if (procConfig.seq > mRootWindowContainer.getConfiguration().seq) {
        
                        // If the seq is increased, there should be something changed (e.g. registered
                        // activity configuration).
                        proc.setLastReportedConfiguration(procConfig);
                    }
                    if ((proc.mInfo.privateFlags & ApplicationInfo.PRIVATE_FLAG_CANT_SAVE_STATE) != 0
                            && mService.mHasHeavyWeightFeature) {
        
                        // This may be a heavy-weight process! Note that the package manager will ensure
                        // that only activity can run in the main process of the .apk, which is the only
                        // thing that will be considered heavy-weight.
                        if (proc.mName.equals(proc.mInfo.packageName)) {
        
                            if (mService.mHeavyWeightProcess != null
                                    && mService.mHeavyWeightProcess != proc) {
        
                                Slog.w(TAG, "Starting new heavy weight process " + proc
                                        + " when already running "
                                        + mService.mHeavyWeightProcess);
                            }
                            mService.setHeavyWeightProcess(r);
                        }
                    }
    
                } catch (RemoteException e) {
        
                    if (r.launchFailed) {
        
                        // This is the second time we failed -- finish activity and give up.
                        Slog.e(TAG, "Second failure launching "
                                + r.intent.getComponent().flattenToShortString() + ", giving up", e);
                        proc.appDied("2nd-crash");
                        r.finishIfPossible("2nd-crash", false /* oomAdj */);
                        return false;
                    }
    
                    // This is the first time we failed -- restart process and
                    // retry.
                    r.launchFailed = true;
                    r.detachFromProcess();
                    throw e;
                }
            } finally {
        
                endDeferResume();
                proc.resumeConfigurationDispatch();
            }
    
       		.......
    
            return true;
        }

这里面重点关注下这行代码（这里会最终调用到ApplicationThread的scheduleTransaction方法，这个在[App启动流程分析（二）][App]中有讲到）：

mService.getLifecycleManager().scheduleTransaction(clientTransaction);

ActivityTaskManagerService.startProcessAsync方法中发送了一个消息，最终执行了ActivityManagerService.startProcess：

public void startProcess(String processName, ApplicationInfo info, boolean knownToBeDead,
                    boolean isTop, String hostingType, ComponentName hostingName) {
        
                try {
        
                    if (Trace.isTagEnabled(Trace.TRACE_TAG_ACTIVITY_MANAGER)) {
        
                        Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "startProcess:"
                                + processName);
                    }
                    synchronized (ActivityManagerService.this) {
        
                        // If the process is known as top app, set a hint so when the process is
                        // started, the top priority can be applied immediately to avoid cpu being
                        // preempted by other processes before attaching the process of top app.
                        startProcessLocked(processName, info, knownToBeDead, 0 /* intentFlags */,
                                new HostingRecord(hostingType, hostingName, isTop),
                                ZYGOTE_POLICY_FLAG_LATENCY_SENSITIVE, false /* allowWhileBooting */,
                                false /* isolated */);
                    }
                } finally {
        
                    Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
                }
            }

ProcessList.startProcessLocked：

final ProcessRecord startProcessLocked(String processName,
                ApplicationInfo info, boolean knownToBeDead, int intentFlags,
                HostingRecord hostingRecord, int zygotePolicyFlags, boolean allowWhileBooting,
                boolean isolated) {
        
            return mProcessList.startProcessLocked(processName, info, knownToBeDead, intentFlags,
                    hostingRecord, zygotePolicyFlags, allowWhileBooting, isolated, 0 /* isolatedUid */,
                    null /* ABI override */, null /* entryPoint */,
                    null /* entryPointArgs */, null /* crashHandler */);
        }
    
      ProcessRecord startProcessLocked(String processName, ApplicationInfo info,
                boolean knownToBeDead, int intentFlags, HostingRecord hostingRecord,
                int zygotePolicyFlags, boolean allowWhileBooting, boolean isolated, int isolatedUid,
                String abiOverride, String entryPoint, String[] entryPointArgs, Runnable crashHandler) {
        
            ...
            checkSlow(startTime, "startProcess: stepping in to startProcess");
            final boolean success =
                    startProcessLocked(app, hostingRecord, zygotePolicyFlags, abiOverride);
            checkSlow(startTime, "startProcess: done starting proc!");
            return success ? app : null;
        }
    
        boolean startProcessLocked(ProcessRecord app, HostingRecord hostingRecord,
                int zygotePolicyFlags, String abiOverride) {
        
            return startProcessLocked(app, hostingRecord, zygotePolicyFlags,
                    false /* disableHiddenApiChecks */, false /* disableTestApiChecks */,
                    abiOverride);
        }
    
        boolean startProcessLocked(ProcessRecord app, HostingRecord hostingRecord,
                int zygotePolicyFlags, boolean disableHiddenApiChecks, boolean disableTestApiChecks,
                String abiOverride) {
        
               ...
             try {
        
                ...
                //记住这里的entryPoint属性，进程启动后会用到
                final String entryPoint = "android.app.ActivityThread";
                return startProcessLocked(hostingRecord, entryPoint, app, uid, gids,
                        runtimeFlags, zygotePolicyFlags, mountExternal, seInfo, requiredAbi,
                        instructionSet, invokeWith, startTime);
            } catch (RuntimeException e) {
        
                return false;
            }
        }
    
    @GuardedBy("mService")
        boolean startProcessLocked(HostingRecord hostingRecord, String entryPoint, ProcessRecord app,
                int uid, int[] gids, int runtimeFlags, int zygotePolicyFlags, int mountExternal,
                String seInfo, String requiredAbi, String instructionSet, String invokeWith,
                long startTime) {
        
                  ...
                    final Process.ProcessStartResult startResult = startProcess(hostingRecord,
                            entryPoint, app,
                            uid, gids, runtimeFlags, zygotePolicyFlags, mountExternal, seInfo,
                            requiredAbi, instructionSet, invokeWith, startTime);
                   handleProcessStartedLocked(app, startResult.pid, startResult.usingWrapper,
                            startSeq, false);
                return app.getPid() > 0;
            }
        }
    
    private Process.ProcessStartResult startProcess(HostingRecord hostingRecord, String entryPoint,
                ProcessRecord app, int uid, int[] gids, int runtimeFlags, int zygotePolicyFlags,
                int mountExternal, String seInfo, String requiredAbi, String instructionSet,
                String invokeWith, long startTime) {
        
            try {
        
                ...
                if (hostingRecord.usesWebviewZygote()) {
        
                    startResult = startWebView(entryPoint,
                            app.processName, uid, uid, gids, runtimeFlags, mountExternal,
                            app.info.targetSdkVersion, seInfo, requiredAbi, instructionSet,
                            app.info.dataDir, null, app.info.packageName,
                            app.getDisabledCompatChanges(),
                            new String[]{
        PROC_START_SEQ_IDENT + app.getStartSeq()});
                } else if (hostingRecord.usesAppZygote()) {
        
                     //普通应用会进入这里
                    //创建zygote对象
                    final AppZygote appZygote = createAppZygoteForProcessIfNeeded(app);
                
                    // 使用Socket通知zygote对象
                    startResult = appZygote.getProcess().start(entryPoint,
                            app.processName, uid, uid, gids, runtimeFlags, mountExternal,
                            app.info.targetSdkVersion, seInfo, requiredAbi, instructionSet,
                            app.info.dataDir, null, app.info.packageName,
                            /*zygotePolicyFlags=*/ ZYGOTE_POLICY_FLAG_EMPTY, isTopApp,
                            app.getDisabledCompatChanges(), pkgDataInfoMap, allowlistedAppDataInfoMap,
                            false, false,
                            new String[]{
        PROC_START_SEQ_IDENT + app.getStartSeq()});
                } else {
        
                    regularZygote = true;
                    startResult = Process.start(entryPoint,
                            app.processName, uid, uid, gids, runtimeFlags, mountExternal,
                            app.info.targetSdkVersion, seInfo, requiredAbi, instructionSet,
                            app.info.dataDir, invokeWith, app.info.packageName, zygotePolicyFlags,
                            isTopApp, app.getDisabledCompatChanges(), pkgDataInfoMap,
                            allowlistedAppDataInfoMap, bindMountAppsData, bindMountAppStorageDirs,
                            new String[]{
        PROC_START_SEQ_IDENT + app.getStartSeq()});
                }
    
                if (!regularZygote) {
        
                    // webview and app zygote don't have the permission to create the nodes
                    if (Process.createProcessGroup(uid, startResult.pid) < 0) {
        
                        Slog.e(ActivityManagerService.TAG, "Unable to create process group for "
                                + app.processName + " (" + startResult.pid + ")");
                    }
                }
    
                // This runs after Process.start() as this method may block app process starting time
                // if dir is not cached. Running this method after Process.start() can make it
                // cache the dir asynchronously, so zygote can use it without waiting for it.
                if (bindMountAppStorageDirs) {
        
                    storageManagerInternal.prepareStorageDirs(userId, pkgDataInfoMap.keySet(),
                            app.processName);
                }
                checkSlow(startTime, "startProcess: returned from zygote!");
                return startResult;
            } finally {
        
                Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
            }
        }

ZygoteProcess.start：

public final Process.ProcessStartResult start(@NonNull final String processClass,
                                                      final String niceName,
                                                      int uid, int gid, @Nullable int[] gids,
                                                      int runtimeFlags, int mountExternal,
                                                      int targetSdkVersion,
                                                      @Nullable String seInfo,
                                                      @NonNull String abi,
                                                      @Nullable String instructionSet,
                                                      @Nullable String appDataDir,
                                                      @Nullable String invokeWith,
                                                      @Nullable String packageName,
                                                      int zygotePolicyFlags,
                                                      boolean isTopApp,
                                                      @Nullable long[] disabledCompatChanges,
                                                      @Nullable Map<String, Pair<String, Long>>
                                                              pkgDataInfoMap,
                                                      @Nullable Map<String, Pair<String, Long>>
                                                              allowlistedDataInfoList,
                                                      boolean bindMountAppsData,
                                                      boolean bindMountAppStorageDirs,
                                                      @Nullable String[] zygoteArgs) {
        
            // TODO (chriswailes): Is there a better place to check this value?
            if (fetchUsapPoolEnabledPropWithMinInterval()) {
        
                informZygotesOfUsapPoolStatus();
            }
    
            try {
        
                return startViaZygote(processClass, niceName, uid, gid, gids,
                        runtimeFlags, mountExternal, targetSdkVersion, seInfo,
                        abi, instructionSet, appDataDir, invokeWith, /*startChildZygote=*/ false,
                        packageName, zygotePolicyFlags, isTopApp, disabledCompatChanges,
                        pkgDataInfoMap, allowlistedDataInfoList, bindMountAppsData,
                        bindMountAppStorageDirs, zygoteArgs);
            } catch (ZygoteStartFailedEx ex) {
        
                Log.e(LOG_TAG,
                        "Starting VM process through Zygote failed");
                throw new RuntimeException(
                        "Starting VM process through Zygote failed", ex);
            }
        }
    
    private Process.ProcessStartResult startViaZygote(@NonNull final String processClass,
                                                          @Nullable final String niceName,
                                                          final int uid, final int gid,
                                                          @Nullable final int[] gids,
                                                          int runtimeFlags, int mountExternal,
                                                          int targetSdkVersion,
                                                          @Nullable String seInfo,
                                                          @NonNull String abi,
                                                          @Nullable String instructionSet,
                                                          @Nullable String appDataDir,
                                                          @Nullable String invokeWith,
                                                          boolean startChildZygote,
                                                          @Nullable String packageName,
                                                          int zygotePolicyFlags,
                                                          boolean isTopApp,
                                                          @Nullable long[] disabledCompatChanges,
                                                          @Nullable Map<String, Pair<String, Long>>
                                                                  pkgDataInfoMap,
                                                          @Nullable Map<String, Pair<String, Long>>
                                                                  allowlistedDataInfoList,
                                                          boolean bindMountAppsData,
                                                          boolean bindMountAppStorageDirs,
                                                          @Nullable String[] extraArgs)
                                                          throws ZygoteStartFailedEx {
        
            ...
            //添加参数，这里的processClass为“android.app.ActivityThread”
            argsForZygote.add(processClass);
            synchronized(mLock) {
        
                //openZygoteSocketIfNeeded会链接Socket并返回状态
                return zygoteSendArgsAndGetResult(openZygoteSocketIfNeeded(abi),
                                                  zygotePolicyFlags,
                                                  argsForZygote);
            }
        }
    
        private Process.ProcessStartResult zygoteSendArgsAndGetResult(
                ZygoteState zygoteState, int zygotePolicyFlags, @NonNull ArrayList<String> args)
                throws ZygoteStartFailedEx {
        
            ...
            //输入参数拼接成msg
           String msgStr = args.size() + "\n" + String.join("\n", args) + "\n";
            return attemptZygoteSendArgsAndGetResult(zygoteState, msgStr);
        }
    
    private Process.ProcessStartResult attemptZygoteSendArgsAndGetResult(
                ZygoteState zygoteState, String msgStr) throws ZygoteStartFailedEx {
        
            try {
        
                //通过状态获取输出
                final BufferedWriter zygoteWriter = zygoteState.mZygoteOutputWriter;
                //获取输入
                final DataInputStream zygoteInputStream = zygoteState.mZygoteInputStream;
               //写入参数
                zygoteWriter.write(msgStr);
                zygoteWriter.flush();
    
                // Always read the entire result from the input stream to avoid leaving
                // bytes in the stream for future process starts to accidentally stumble
                // upon.
                Process.ProcessStartResult result = new Process.ProcessStartResult();
                result.pid = zygoteInputStream.readInt();
                result.usingWrapper = zygoteInputStream.readBoolean();
    
                if (result.pid < 0) {
        
                    throw new ZygoteStartFailedEx("fork() failed");
                }
    
                return result;
            } catch (IOException ex) {
        
                zygoteState.close();
                Log.e(LOG_TAG, "IO Exception while communicating with Zygote - "
                        + ex.toString());
                throw new ZygoteStartFailedEx(ex);
            }
        }

这里通过Socket请求Zygote进程启动App进程，然后会等待Zygote进程的处理结果。

Zygote进程在启动的时候就会创建DVM或者ART，因此通过fork而创建的进程可以在内部获取一个DVM或者ART的实例副本。Zygote进程启动的时候会执行ZygoteInit\#main方法。

先写到这里，后面关于Zygote进程fork出App进程后的后续流程在下一篇再论述。

[250075b9320441ceb867050a50e5f5d2.png]: https://img-blog.csdnimg.cn/250075b9320441ceb867050a50e5f5d2.png
[2eb316b023214cb6a6ed8d046a1039ac.png]: https://img-blog.csdnimg.cn/2eb316b023214cb6a6ed8d046a1039ac.png
[App]: https://blog.csdn.net/u010257931/article/details/131423105