流行病毒传染模拟仿真实验

冷不防 2023-10-10 08:53 31阅读 0赞

# 流行病毒传染模拟仿真实验 #

> 共有三个java文件，请根据注释提醒，补充程序并完成仿真实验。

### Epidemic.java（主类） ###

/** * Main class for simulating an epidemic. The simulation consists of a "world" * (a square matrix of cells, or ints). Each cell can be empty or contains an * individual. The state of a cell is denoted by its integer value in the array. * The value {@code Config.EMPTY} (which is 0) indicates an empty cell. * Each individual can be in one of the following states: * <ul> * <li>Uninfected. This individual has never been infected with the * disease. This is indicated by the value {@code Config.UNINFECTED}, * which is -1. * <li>Recovered. This individual was infected with the disease but is * no longer infected. This is indicated by the value * {@code Config.RECOVERED}, which is. Once recovered, an individual can * never again become infected. * <li>Infected. This individual currently has the disease. This is * indicated by an integer value greater than 1. The higher this value, * the longer the period will be before this individual switches to the * RECOVERED state. If the value is less than or equal to * {@code Config.CONTAGIOUS}, the individual is contagious and can * spread their disease to others. * </ul> * * Remember to use the constants from the {@code Config} class * directly. DO NOT hard-code constant values from the Config class. You * will lose points if you do this. */
 public class Epidemic { 
 
 //
 // A NOTE ON USING THIS SKELETON.
 // We have provided many comments below to outline how your program
 // should work. We do not, however, provide a comment describing
 // every piece of code you will have to write. You may find that you
 // need to add additional code to fully support the functionality
 // required by the comments.
 //
 
 /** * Application entry point. Runs an epidemic simulation to completion, * displaying the results after each step using a {@code WorldViewer} * object. Each step in the simulation consists of the following sub-steps: * <ol> * <li>Move individuals around in the world. * <li>Decrement infected individuals to represent the passage of time. * <li>Spread disease from contagious to uninfected individuals. * </ol> * * At the end of each simulation step (that is, after each spread-disease * substep), you should display the current simulation state by calling * {@code Config.VIEWER.showWorld()} and passing the correct arguments. * This will update the picture displayed on the window. * * The simulation is complete once there are no more infected * individuals. * * @param args Command-line arguments (ignored). */
 public static void main(String[] args) {
 
 
 // TODO
 
 
 // Create a world as a 2-D array of ints. Use Config.WORLD_SIZE as
 // the width and height of the world. The cells in the array will
 // default to 0, which equals Config.EMPTY.
 
 // Call the populateWorld method to populate the world with individuals.
 
 // You may want to declare some variables to keep track of the
 // simulation state. This will help you determine when the simulation is
 // complete.
 
 // Loop until there are no more infected individuals in the world.
 
 // Call the move method to move individuals around in the world.
 
 // Call the decrement method to advance the state of all infected
 // individuals in the world.
 
 // Call the spreadDisease method to spread disease from contagious
 // to uninfected individuals.
 
 // Update the viewer by calling Config.VIEWER.showWorld() and
 // passing the appropriate information as arguments.
 }
 
 /** * Populates the given world with uninfected and infected individuals, as * specified by {@code Config.INITIAL_UNINFECTED_COUNT} and * {@code Config.INITIAL_INFECTED_COUNT}. * * @param world World to populate. */
 public static void populateWorld(int[][] world) {
 //world = new int [89][89]; 
 //INITIAL_UNINFECTED_COUNT {@code Config.INITIAL_UNINFECTED_COUNT}
 //{@code Config.INITIAL_INFECTED_COUNT}
 // TODO
 
 // Populate the world with the correct number
 // (Config.INITIAL_UNINFECTED_COUNT) of uninfected individuals. Use
 // a loop to call the addIndividual method repeatedly to do this. The
 // addIndividual method should be used to add each individual to the
 // world.
 
 // Populate world with the correct number
 // (Config.INITIAL_INFECTED_COUNT) of infected individuals. Again,
 // use a loop to repeatedly call the addInviddual method.
 }
 
 /** * Adds an individual to the simulation world. This should be done by * randomly selecting an EMPTY cell in the world. That cell's value should * then be changed to the specified {@code newIndividual} value. * * @param world World to add an individual to. * @param newIndividual The new value to put into the randomly selected * cell. */
 public static void addIndividual(int[][] world, int newIndividual) {
 // TODO
 }
 
 /** * Randomly moves individuals around in the world. This should be done by * randomly selecting pairs of adjacent cells in the array. Each such pair * should then have their values swapped. The number of pairs swapped should * equal half the number of cells in the world. * * @param world The world array. */
 public static void move(int[][] world) {
 // TODO
 
 // Repeatedly call the swapRandomIndividuals method. The number of times
 // you call it should be equal to half (round down) of the total number
 // of cells in the world.
 }
 
 /** * Randomly swaps two adjacent individuals. * * @param world The world array. */
 public static void swapRandomIndividuals(int[][] world) {
 // TODO
 
 // Pick a random cell in the world.
 
 // Randomly pick one of the eight cells adjacent to this one. That is,
 // if X was the cell picked earlier, randomly pick one of the A's from
 // the diagram below:
 // A A A
 // A X A
 // A A A
 
 // Swap the values contained by the two selected cells.
 }
 
 /** * Advances the disease state of all infected individuals. If an individual * is infected, his or her state should be decremented by 1 to show the * advancement of the disease towards the RECOVERED state. Individuals who * are not infected should not be affected by the decrement method. * * @param world The world array. */
 public static void decrement(int[][] world) {
 // TODO
 }
 
 /** * Spreads disease from contagious individuals to adjacent UNINFECTED * individuals. For each pair of adjacent individuals, if one of them is * contagious and the other is UNINFECTED, then there is a fixed chance * ({@code Config.INFECTION_PROBABILITY}) that the UNINFECTED individual * will become contagious. * * @param world The world array. */
 public static void spreadDisease(int[][] world) {
 // TODO
 
 // Loop over all the cells in the world.
 
 // If the cell does not contain a contagious individual (note
 // that it could be EMPTY), do nothing.
 
 // If the cell does contain a contagious individual, loop over
 // all eight cells that are adjacent to this contagious
 // individual. In this loop, you should check each adjacent cell
 // to see if it is UNINFECTED. If it is, that cell should have a
 // change (Config.INFECTION_PROBABILITY) of becoming
 // infected right now. To mark the cell as infected, set its
 // value to Config.INFECTED.
 }
 
 /** * Wraps a world coordinate around. Using this on all coordinates means that * our world has no boundaries--individuals and infections simply wrap * around from top to bottom and from left to right. This is sometimes * called a "toroidal world". See * <a href="http://en.wikipedia.org/wiki/Torus">Wikipedia</a>. * * You should call this method on any index before you use it to * index into the world array. That way, even cells on the edges of the * array will be considered to have eight adjacent cells. For example, * consider the cell marked "X" below: * <pre> * A * A A * A * A X * A * A A * * * * *</pre> * The cell "X" is adjacent to the eight cells marked "A" because the world * wraps around at the edges. * * @param size Size of the world. * @param coord Coordinate to be wrapped. * @return The wrapped version of the coordinate. */
 public static int wrap(int size, int coord) {
 // What you want to do here is take an input coord that is potentially
 // outside the bounds of the world array and wrap it around so it falls
 // within the bounds of the array. There are two ways that the coord can
 // be outside the bounds of the world array:
 // (1) it can be greater than or equal to size
 // (2) it can be less than or equal to -1
 // In the first case, we want to subtract the size from the coord to
 // bring it within the legal range. In the second case, we want to add
 // the size to the coord to bring it within the legal range. You can do
 // this with loops and if statements, or you can do it much more
 // elegantly using the modulus operator (%), which takes the remainder
 // of its first argument after integer division by its second argument.
 return 0; // TODO
 }
 
 }

### 2. WorldViewer.java ###

import java.awt.*;
 import java.awt.event.*;
 import java.awt.geom.*;
 import java.util.Arrays;
 import java.util.concurrent.locks.*;
 
 import javax.swing.*;
 
 /** * Provides a graphical user interface (GUI) for displaying a world in the * epidemic simulation. The world is displayed * as a grid of cells. Empty cells will show up as empty (black) in the grid. * Uninfected individuals appear as small blue dots, infected individuals appear * as large red dots, and recovered individuals appear as small pink dots. * The viewer does not distinguish between contagious and non-contagious * infected individuals; that is, it displays all infected individuals as large * red dots. * * The viewer also shows the integer values passed to its {@link #showWorld} * method: * <ol> * <li>The number of simulation steps executed so far. * <li>The current count of uninfected individuals. * <li>The current count of infected individuals. * <li>The current count of recovered individuals. * </ol> * * DO NOT EDIT THIS FILE. You should put all your code for this * assighnment in Epidemic.java. * * @author pollen */
 public class WorldViewer { 
 
 private Snapshot current, previous, next;
 
 private final JFrame frame;
 private final JButton stepForwardButton;
 private final JButton stepBackButton;
 private final JLabel stepsLabel;
 private final JLabel uninfectedLabel;
 private final JLabel infectedLabel;
 private final JLabel recoveredLabel;
 
 /** Number of milliseconds to pause after each showWorld call. */
 private final int frameDuration;
 
 private final boolean enable;
 
 private final Lock lock = new ReentrantLock();
 private final Condition cond = lock.newCondition();
 
 /** * Creates a new WorldViewer for use in students' code. The window will not * be shown until the showWorld method is called at least once. */
 public WorldViewer() {
 this(40, true);
 }
 
 /** * Creates a new WorldViewer. The window will not be shown until the * showWorld method is called at least once. * * Students' code should not call this constructor. It is for testing * purposes only. * * @param frameDuration Number of milliseconds to pause after showing each * frame. */
 public WorldViewer(int frameDuration, boolean enable) {
 this.frameDuration = frameDuration;
 this.enable = enable;
 
 frame = new JFrame();
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.setTitle("Epidemic Simulation");
 frame.setSize(800, 600);
 frame.setLocation(100, 100);
 
 JPanel pane = new JPanel();
 pane.setLayout(new BorderLayout());
 frame.setContentPane(pane);
 
 pane.add(new WorldPane(), BorderLayout.CENTER);
 
 JPanel status = new JPanel();
 status.setBorder(BorderFactory.createEmptyBorder(2, 2, 2, 2));
 status.setLayout(new GridLayout(1, 6));
 pane.add(status, BorderLayout.SOUTH);
 
 stepBackButton = new JButton("<< Step");
 stepBackButton.addActionListener(new ActionListener() {
 @Override
 public void actionPerformed(ActionEvent arg0) {
 stepBack();
 }});
 stepBackButton.setEnabled(false);
 status.add(stepBackButton);
 
 stepForwardButton = new JButton("Step >>");
 stepForwardButton.addActionListener(new ActionListener() {
 @Override
 public void actionPerformed(ActionEvent arg0) {
 stepForward();
 }});
 stepForwardButton.setEnabled(false);
 status.add(stepForwardButton);
 
 stepsLabel = new JLabel();
 status.add(stepsLabel);
 
 uninfectedLabel = new JLabel();
 status.add(uninfectedLabel);
 
 infectedLabel = new JLabel();
 status.add(infectedLabel);
 
 recoveredLabel = new JLabel();
 status.add(recoveredLabel);
 }
 
 private void stepForward() {
 if (next != null) {
 showWorld(next, true, true);
 } else {
 runSimulation();
 }
 }
 
 private void stepBack() {
 showWorld(previous, true, false);
 }
 
 /** Wakens the sleeping simulation to run another step. */
 private void runSimulation() {
 lock.lock();
 try {
 cond.signalAll();
 } finally {
 lock.unlock();
 }
 }
 
 /** Pauses the simulation. */
 private void pauseSimulation(boolean await) {
 if (await) {
 lock.lock();
 try {
 cond.await();
 } catch (InterruptedException e) {
 // Empty.
 } finally {
 lock.unlock();
 }
 } else {
 try {
 Thread.sleep(frameDuration);
 } catch (InterruptedException e) {
 // Empty.
 }
 }
 }
 
 /** * Displays the current state of the simulated world on the GUI window. * * @param world Matrix of tiles that make up the world. * @param stepsTaken Number of steps that have been taken so far in this * simulation. * @param numUninfected Current number of uninfected individuals in the * simulation. * @param numInfected Current number of infected individuals in the * simulation. * @param numRecovered Current number of recovered individuals in the * simulation. * @param pause True to pause the simulation until the user hits the "Step" * button. False to keep running without requiring the user to hit * the "Step" button. Feel free to pass either {@code true} or {@code * false} here. The <a href= * "http://pages.cs.wisc.edu/~cs302/programs/p2/example-video.html"> * example video</a> was generated with {@code pause} set to {@code * false}. */
 public void showWorld(
 int[][] world,
 int stepsTaken,
 int numUninfected,
 int numInfected,
 int numRecovered,
 boolean pause
 ) {
 showWorld(new Snapshot(
 world,
 stepsTaken,
 numUninfected,
 numInfected,
 numRecovered),
 pause, true);
 pauseSimulation(pause);
 }
 
 private void showWorld(
 Snapshot newSnapshot,
 boolean await,
 boolean forward) {
 if (forward) {
 previous = current;
 next = null;
 } else {
 previous = null;
 next = current;
 }
 current = newSnapshot;
 
 stepForwardButton.setEnabled(next != null || await);
 stepBackButton.setEnabled(previous != null && await);
 
 update();
 }
 
 /** Updates the painted display based on the current Snapshot. */
 private void update() {
 if (enable) {
 stepsLabel.setText(String.format(
 " Steps: %d", current.stepsTaken));
 uninfectedLabel.setText(String.format(
 " Uninfected: %d", current.numUninfected));
 infectedLabel.setText(String.format(
 " Infected: %d", current.numInfected));
 recoveredLabel.setText(String.format(
 " Recovered: %d", current.numRecovered));
 
 frame.setVisible(true); // Make sure the window is shown.
 frame.repaint();
 }
 }
 
 /** * Prints a representation of the current state of the world to System.out. * While your program is not required to ever call this method, you may find * it useful for debugging purposes. * <ul> * <li>Empty cells are represented by a space. * <li>Uninfected cells are represented by a period (.). * <li>Recovered cells are represented by a star (*). * <li>Infected cells are represented by an at-sign (@). * </ul> * * @param world World array to print. */
 public static void printWorld(int[][] world) {
 for (int i = 0; i < world.length; i++) {
 for (int j = 0; j < world[i].length; j++) {
 char c;
 switch (world[i][j]) {
 case Config.EMPTY:
 c = ' ';
 break;
 case Config.UNINFECTED:
 c = '.';
 break;
 case Config.RECOVERED:
 c = '*';
 break;
 default:
 c = '@';
 break;
 }
 System.out.print(c + " ");
 }
 System.out.println();
 }
 }
 
 /** * Gets the current number of uninfected individuals, based on the values * that were passed into {@code showWorld}. * * Students' code should not call this method. It is for testing * purposes only. */
 public int getUninfectedCount() {
 return current == null ? 0 : current.numUninfected;
 }
 
 /** * Gets the current number of infected individuals, based on the values that * were passed into {@code showWorld}. * * Students' code should not call this method. It is for testing * purposes only. */
 public int getInfectedCount() {
 return current == null ? 0 : current.numInfected;
 }
 
 /** * Gets the current number of recovered individuals, based on the values * that were passed into {@code showWorld}. * * Students' code should not call this method. It is for testing * purposes only. */
 public int getRecoveredCount() {
 return current == null ? 0 : current.numRecovered;
 }
 
 /** * Gets the number of simulation steps executed so far, based on the values * that were passed into {@code showWorld}. * * Students' code should not call this method. It is for testing * purposes only. */
 public int getStepCount() {
 return current == null ? 0 : current.stepsTaken;
 }
 
 /** JPanel for painting a World on the screen. */
 private class WorldPane extends JPanel { 
 
 private static final long serialVersionUID = 1L;
 
 public WorldPane() {
 setBorder(BorderFactory.createEmptyBorder(5, 5, 5, 5));
 }
 
 @Override
 public void paint(Graphics graphics) {
 int[][] world = current.world;
 Graphics2D g = (Graphics2D) graphics;
 final Insets insets = getInsets();
 final int width = getWidth();
 final int height = getHeight();
 
 g.setColor(Color.BLACK);
 g.fillRect(0, 0, width, height);
 
 if (world == null) {
 // Leave a blank screen.
 
 } else {
 // Paint each tile in the proper location.
 int size = world.length;
 double tileWidth = Math.min(
 width - insets.left - insets.right,
 height - insets.top - insets.bottom) / (double) size;
 
 // First paint blue and pink individuals (and gray walls, for
 // the extra credit portion of the assignment) at a normal size.
 for (int row = 0; row < size; row++) {
 for (int col = 0; col < size; col++) {
 int tile = world[row][col];
 if (tile == Config.EMPTY) {
 // Paint nothing.
 } else if (tile == Config.WALL) {
 // Paint a gray square.
 g.setColor(Color.GRAY);
 g.fill(new Rectangle2D.Double(
 col * tileWidth + insets.left,
 row * tileWidth + insets.top,
 tileWidth, tileWidth));
 } else {
 // Choose a color based on the individual's status.
 if (tile == Config.UNINFECTED) {
 g.setColor(Color.CYAN);
 } else if (tile == Config.RECOVERED) {
 g.setColor(Color.PINK);
 } else { // Infected.
 continue;
 }
 
 // Paint a circle to represent the individual.
 g.fill(new Ellipse2D.Double(
 (col + 0.1) * tileWidth + insets.left,
 (row + 0.1) * tileWidth + insets.top,
 tileWidth * 0.8, tileWidth * 0.8));
 }
 }
 }
 
 // Now paint red individuals at a larger size.
 for (int row = 0; row < size; row++) {
 for (int col = 0; col < size; col++) {
 int tile = world[row][col];
 if (tile == Config.EMPTY) {
 // Paint nothing.
 } else {
 // Choose a color based on the individual's status.
 if (tile == Config.UNINFECTED) {
 continue;
 } else if (tile == Config.RECOVERED) {
 continue;
 } else if (tile == Config.WALL){
 continue;
 } else { // Infected.
 g.setColor(Color.RED);
 }
 
 // Paint a circle to represent the individual.
 g.fill(new Ellipse2D.Double(
 (col - 0.3) * tileWidth + insets.left,
 (row - 0.3) * tileWidth + insets.top,
 tileWidth * 1.6, tileWidth * 1.6));
 }
 }
 }
 }
 }
 
 }
 
 private static class Snapshot { 
 public final int[][] world;
 public final int stepsTaken;
 public final int numUninfected;
 public final int numInfected;
 public final int numRecovered;
 
 public Snapshot(
 int[][] world,
 int stepsTaken,
 int numUninfected,
 int numInfected,
 int numRecovered) {
 this.stepsTaken = stepsTaken;
 this.numUninfected = numUninfected;
 this.numInfected = numInfected;
 this.numRecovered = numRecovered;
 this.world = copy(world);
 }
 
 /** Creates a copy of a world. */
 private static int[][] copy(int[][] world) {
 int[][] copy = new int[world.length][];
 for (int i = 0; i < world.length; i++) {
 copy[i] = Arrays.copyOf(world[i], world[i].length);
 }
 return copy;
 }
 }
 
 }

### 3. Config.java ###

import java.util.Random;
 
 /** * Defines constant simulation configuration values. You should refer to these * constants in your program. Do not put these magic numbers directly into your * program's code. Instead, access them like this: {@code Config.RANDOM}, * {@code Config.INFECTED}, etc. * * DO NOT ADD, REMOVE, OR RENAME VARIABLES IN THIS FILE. You may * change values in order to test your program for different configuration * values. * * @author pollen */
 public class Config { 
 
 private Config() {
 // This private constructor prevents anyone from ever creating an
 // instance of this class.
 }
 
 /** * Random number generator to use for simulation. You may also create your * own Random objects; we just provide this one for your convenience. In * your Epidemic class, you may access it by typing {@code * Config.RANDOM}. */
 public static final Random RANDOM = new Random();
 
 /** * WorldViewer object to use for showing simulation results to the user in * a GUI (Graphical User Interface) window. Do not create additional * WorldViewer objects, as doing so will break our grading system. Use this * WorldViewer object for displaying all stages of the simulation. */
 public static final WorldViewer VIEWER = new WorldViewer();
 
 
 
 /** Value to represent an empty tile in the world. */
 public static final int EMPTY = 0;
 
 /** Value to represent an uninfected individual in the world. */
 public static final int UNINFECTED = -1;
 
 /** * Value representing a wall in the world. This is only used for the * extra credit portion of the assignment. If you aren't doing extra * credit, then you should ignore this constant. */
 public static final int WALL = -2;
 
 /** * Value to represent an individual who has recovered from being infected. */
 public static final int RECOVERED = 1;
 
 /** Value to represent an individual who has just become infected. */
 public static final int INFECTED = 9;
 
 /** * Value to represent an individual who is infected and contagious. Any * value less than or equal to CONTAGIOUS and greater than RECOVERED is * considered a contagious individual. */
 public static final int CONTAGIOUS = 7;
 
 
 
 /** * Probability that infection is passed between any two adjacent * individuals. */
 public static final double INFECTION_PROBABILITY = 0.06;
 
 /** * Probability that an infected individual dies during any simulation step. * This is only used for the extra credit portion of the assignment. * If you aren't doing extra credit, then you should ignore this constant. */
 public static final double DEATH_PROBABILITY = 0.05;
 
 /** Width and height of the world, in cells. */
 public static final int WORLD_SIZE = 90;
 
 /** Initial count of uninfected individuals in the simulation. */
 public static final int INITIAL_UNINFECTED_COUNT =
 (int)(WORLD_SIZE * WORLD_SIZE * 0.8);
 
 /** Initial count of infected individuals in the simulation. */
 public static final int INITIAL_INFECTED_COUNT = 5;
 
 
 
 /** * Height of walls to create in the world. This is only used for the * extra credit portion of the assignment. If you aren't doing extra * credit, then you should ignore this constant. */
 public static final int WALL_HEIGHT = (int)(WORLD_SIZE * 0.80);
 
 /** * Horizontal spacing of walls to create in the world. This is only used * for the extra credit portion of the assignment. If you aren't doing * extra credit, then you should ignore this constant. */
 public static final int WALL_SPACING = 8;
 
 }

转载于:https://www.cnblogs.com/cnlht/p/9495636.html