【Apache Flume】Apache Flume快速入门及基础组件概述

旧城等待， 2023-10-05 13:58 35阅读 0赞

#### Apache Flume ####

*   *  Agent配置模板
     *  QuickStart
     *  基础组件概述
     *   *  Source-输入源
         *   *  Avro Source
             *  Exec Source
             *  Spooling Directory Source
             *  Taildir Source
             *  Kafka Source
         *  Sink-输出
         *   *  Logger Sink
             *  File Roll Sink
             *  HDFS Sink
             *  Kafka Sink
             *  Avro Sink: 将数据写出给Avro Source
         *  Channel-通道
         *   *  Memory Channel
             *  JDBC Channel
             *  Kafka Channel
             *  File Channel

### Agent配置模板 ###

# 声明组件信息
    <Agent>.sources = <Source1> <Source2>
    <Agent>.sinks = <Sink1> <Sink1>
    <Agent>.channels = <Channel1> <Channel2>
    
    # 组件配置
    <Agent>.sources.<Source>.<someProperty> = <someValue>
    <Agent>.channels.<Channel>.<someProperty> = <someValue>
    <Agent>.sinks.<Sink>.<someProperty> = <someValue>
    
    # 链接组件
    <Agent>.sources.<Source>.channels = <Channel1> <Channel2> ...
    <Agent>.sinks.<Sink>.channel = <Channel1>

> 模板结构是必须掌握的，掌握该模板的目的是为了便于后期的查阅和配置。
> 
> `<Agent>`、`<Channel>`、`<Sink>`、`<Source>`表示组件的名字，系统有哪些可以使用的组件需要查阅文档.

### QuickStart ###

①`helloword.properties` 单个Agent的配置,将该配置文件放置在flume安装目录下的conf目录下。

# 声明基本组件 Source Channel Sink
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = netcat
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

> 1、安装一下`yum -y install nmap-ncat`，这样方便后续的测试。  
> 2、需要安装`yum -y install telnet`，方便做测试。

②启动a1 采集组件

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/helloword.properties -Dflume.root.logger=INFO,console

`附注启动命令参数`

Usage: ./bin/flume-ng <command> [options]...
    
    commands:
      help                      display this help text
      agent                     run a Flume agent
      avro-client               run an avro Flume client
      version                   show Flume version info
    
    global options:# 全局属性
      --conf,-c <conf>          use configs in <conf> directory
      --classpath,-C <cp>       append to the classpath
      --dryrun,-d               do not actually start Flume, just print the command
      --plugins-path <dirs>     colon-separated list of plugins.d directories. See the
                                plugins.d section in the user guide for more details.
                                Default: $FLUME_HOME/plugins.d
      -Dproperty=value          sets a Java system property value
      -Xproperty=value          sets a Java -X option
    
    agent options:
      --name,-n <name>          the name of this agent (required)
      --conf-file,-f <file>     specify a config file (required if -z missing)
      --zkConnString,-z <str>   specify the ZooKeeper connection to use (required if -f missing)
      --zkBasePath,-p <path>    specify the base path in ZooKeeper for agent configs
      --no-reload-conf          do not reload config file if changed
      --help,-h                 display help text
    
    avro-client options:
      --rpcProps,-P <file>   RPC client properties file with server connection params
      --host,-H <host>       hostname to which events will be sent
      --port,-p <port>       port of the avro source
      --dirname <dir>        directory to stream to avro source
      --filename,-F <file>   text file to stream to avro source (default: std input)
      --headerFile,-R <file> File containing event headers as key/value pairs on each new line
      --help,-h              display help text
    
      Either --rpcProps or both --host and --port must be specified.
    
    Note that if <conf> directory is specified, then it is always included first
    in the classpath.

③测试a1

[root@CentOS apache-flume-1.9.0-bin]# telnet CentOS 44444
    Trying 192.168.52.134...
    Connected to CentOS.
    Escape character is '^]'.
    hello world

2020-02-05 11:44:43,546 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:95)] Event: {
         headers:{
        } body: 68 65 6C 6C 6F 20 77 6F 72 6C 64 0D             hello world. }

### 基础组件概述 ###

#### Source-输入源 ####

##### Avro Source #####

通常用于远程采集数据（RPC服务），内部启动一个Avro 服务器，用于接收来自Avro Client的请求，并且将接收数据存储到Chanel中。

<table> 
 <thead> 
  <tr> 
   <th>属性</th> 
   <th>默认值</th> 
   <th>含义</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>channels</strong></td> 
   <td></td> 
   <td>需要对接Channel</td> 
  </tr> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>表示组件类型，必须给<code>avro</code></td> 
  </tr> 
  <tr> 
   <td><strong>bind</strong></td> 
   <td></td> 
   <td>绑定IP</td> 
  </tr> 
  <tr> 
   <td><strong>port</strong></td> 
   <td></td> 
   <td>绑定监听端口</td> 
  </tr> 
 </tbody> 
</table>

#声明组件
    a1.sources = s1
    
    # 配置组件
    a1.sources.s1.type = avro
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 对接channel
    a1.sources.s1.channels = c1

<Agent>.sources = <Source>
    # 组件配置
    <Agent>.sources.<Source>.<someProperty> = <someValue>

# 声明基本组件 Source Channel Sink  example2.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = avro
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example2.properties -Dflume.root.logger=INFO,console

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng avro-client --host CentOS --port 44444  --filename /root/t_employee

##### Exec Source #####

可以将指令在控制台输出采集过来。通常需要将Flume的agent目标采集服务部署在一起。

<table> 
 <thead> 
  <tr> 
   <th>属性</th> 
   <th>默认值</th> 
   <th>描述</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>channels</strong></td> 
   <td></td> 
   <td>需要对接Channel</td> 
  </tr> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>必须指定为<code>exec</code></td> 
  </tr> 
  <tr> 
   <td><strong>command</strong></td> 
   <td></td> 
   <td>要执行的命令</td> 
  </tr> 
 </tbody> 
</table>

# 声明基本组件 Source Channel Sink  example3.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = exec
    a1.sources.s1.command = tail -F /root/t_user
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example3.properties -Dflume.root.logger=INFO,console

[root@CentOS ~]# tail -f t_user

##### Spooling Directory Source #####

采集静态目录下，新增文本文件，采集完成后会修改文件后缀，但是不会删除采集的源文件，如果用户只想采集一次，可以修改该source默认行为。通常需要将Flume的agent目标采集服务部署在一起。

<table> 
 <thead> 
  <tr> 
   <th>属性</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>channels</strong></td> 
   <td></td> 
   <td>对接的Channel</td> 
  </tr> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>必须修改为<code>spooldir</code></td> 
  </tr> 
  <tr> 
   <td><strong>spoolDir</strong></td> 
   <td></td> 
   <td>给定需要采集的目录</td> 
  </tr> 
  <tr> 
   <td>fileSuffix</td> 
   <td>.COMPLETED</td> 
   <td>使用该值修改采集完成文件名</td> 
  </tr> 
  <tr> 
   <td>deletePolicy</td> 
   <td>never</td> 
   <td>可选值<code>never</code>/<code>immediate</code></td> 
  </tr> 
  <tr> 
   <td>includePattern</td> 
   <td>^.*$</td> 
   <td>表示匹配所有文件</td> 
  </tr> 
  <tr> 
   <td>ignorePattern</td> 
   <td>^$</td> 
   <td>表示不匹配的文件</td> 
  </tr> 
 </tbody> 
</table>

# 声明基本组件 Source Channel Sink  example4.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = spooldir
    a1.sources.s1.spoolDir = /root/spooldir
    a1.sources.s1.fileHeader = true
    a1.sources.s1.deletePolicy = immediate
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example4.properties -Dflume.root.logger=INFO,console

##### Taildir Source #####

实时监测动态文本行的追加，并且记录采集的文件读取的位置了偏移量，即使下一次再次采集，可以实现增量采集。通常需要将Flume的agent目标采集服务部署在一起。

<table> 
 <thead> 
  <tr> 
   <th>属性</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>channels</strong></td> 
   <td></td> 
   <td>对接的通道</td> 
  </tr> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>必须指定为<code>TAILDIR</code></td> 
  </tr> 
  <tr> 
   <td><strong>filegroups</strong></td> 
   <td></td> 
   <td>以空格分隔的文件组列表。</td> 
  </tr> 
  <tr> 
   <td><strong>filegroups.</strong></td> 
   <td></td> 
   <td>文件组的绝对路径。正则表达式（而非文件系统模式）只能用于文件名。</td> 
  </tr> 
  <tr> 
   <td>positionFile</td> 
   <td>~/.flume/taildir_position.json</td> 
   <td>记录采集文件的位置信息，实现增量采集</td> 
  </tr> 
 </tbody> 
</table>

# 声明基本组件 Source Channel Sink  example5.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = TAILDIR
    a1.sources.s1.filegroups = g1 g2
    a1.sources.s1.filegroups.g1 = /root/taildir/.*\.log$
    a1.sources.s1.filegroups.g2 = /root/taildir/.*\.java$
    a1.sources.s1.headers.g1.type = log
    a1.sources.s1.headers.g2.type = java
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example5.properties -Dflume.root.logger=INFO,console

##### Kafka Source #####

<table> 
 <thead> 
  <tr> 
   <th>参数</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>channels</strong></td> 
   <td></td> 
   <td></td> 
  </tr> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>必须为org.apache.flume.source.kafka.KafkaSource</td> 
  </tr> 
  <tr> 
   <td><strong>kafka.topics</strong></td> 
   <td></td> 
   <td>Kafka使用者将从中读取消息的主题的逗号分隔列表。</td> 
  </tr> 
  <tr> 
   <td><strong>kafka.bootstrap.servers</strong></td> 
   <td></td> 
   <td>来源使用的Kafka集群中的Broker列表</td> 
  </tr> 
  <tr> 
   <td><strong>kafka.topics.regex</strong></td> 
   <td></td> 
   <td>正则表达式，用于定义订阅源的主题集。此属性的优先级高于kafka.topics，并且覆盖kafka.topics（如果存在）。</td> 
  </tr> 
  <tr> 
   <td>batchSize</td> 
   <td>1000</td> 
   <td>批量写入通道的最大消息数</td> 
  </tr> 
 </tbody> 
</table>

# 声明基本组件 Source Channel Sink example9.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = org.apache.flume.source.kafka.KafkaSource
    a1.sources.s1.batchSize = 100 
    a1.sources.s1.batchDurationMillis = 2000
    a1.sources.s1.kafka.bootstrap.servers = CentOS:9092
    a1.sources.s1.kafka.topics = topic01
    a1.sources.s1.kafka.consumer.group.id = g1
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example9.properties -Dflume.root.logger=INFO,console

#### Sink-输出 ####

##### Logger Sink #####

通常用于测试/调试目的。

##### File Roll Sink #####

可以将采集的数据写入到本地文件

# 声明基本组件 Source Channel Sink example6.properties
    
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = netcat
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = file_roll
    a1.sinks.sk1.sink.directory = /root/file_roll
    a1.sinks.sk1.sink.rollInterval = 0
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/example6.properties

##### HDFS Sink #####

可以将数据写入到HDFS文件系统

# 声明基本组件 Source Channel Sink example7.properties
    
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = netcat
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = hdfs
    a1.sinks.sk1.hdfs.path = /flume-hdfs/%y-%m-%d
    a1.sinks.sk1.hdfs.rollInterval = 0
    a1.sinks.sk1.hdfs.rollSize = 0
    a1.sinks.sk1.hdfs.rollCount = 0
    a1.sinks.sk1.hdfs.useLocalTimeStamp = true
    a1.sinks.sk1.hdfs.fileType = DataStream
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

##### Kafka Sink #####

将数据写入Kafka的Topic中

# 声明基本组件 Source Channel Sink example8.properties
    
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = netcat
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = org.apache.flume.sink.kafka.KafkaSink
    a1.sinks.sk1.kafka.bootstrap.servers = CentOS:9092
    a1.sinks.sk1.kafka.topic = topic01
    a1.sinks.sk1.kafka.flumeBatchSize = 20
    a1.sinks.sk1.kafka.producer.acks = 1
    a1.sinks.sk1.kafka.producer.linger.ms = 1
    a1.sinks.sk1.kafka.producer.compression.type = snappy
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

##### Avro Sink: 将数据写出给Avro Source #####

\[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-KtsySS4R-1605757146694)(assets/image-20201021114843362.png)\]

# 声明基本组件 Source Channel Sink example10.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = org.apache.flume.source.kafka.KafkaSource
    a1.sources.s1.batchSize = 100 
    a1.sources.s1.batchDurationMillis = 2000
    a1.sources.s1.kafka.bootstrap.servers = CentOS:9092
    a1.sources.s1.kafka.topics = topic01
    a1.sources.s1.kafka.consumer.group.id = g1
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = avro
    a1.sinks.sk1.hostname = CentOS
    a1.sinks.sk1.port = 44444
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000
    a1.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1
    
    # 声明基本组件 Source Channel Sink example9.properties
    a2.sources = s1
    a2.sinks = sk1
    a2.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a2.sources.s1.type = avro
    a2.sources.s1.bind = CentOS 
    a2.sources.s1.port = 44444
    
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a2.sinks.sk1.type = file_roll
    a2.sinks.sk1.sink.directory = /root/file_roll
    a2.sinks.sk1.sink.rollInterval = 0
    
    # 配置Channel通道，主要负责数据缓冲
    a2.channels.c1.type = memory
    a2.channels.c1.capacity = 1000
    a2.channels.c1.transactionCapacity = 100
    
    # 进行组件间的绑定
    a2.sources.s1.channels = c1
    a2.sinks.sk1.channel = c1

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --conf-file conf/example10.properties --name a2

[root@CentOS apache-flume-1.9.0-bin]# ./bin/flume-ng agent --conf conf/ --conf-file conf/example10.properties --name a1

[root@CentOS kafka_2.11-2.2.0]# ./bin/kafka-console-producer.sh --broker-list CentOS:9092 --topic topic01

#### Channel-通道 ####

##### Memory Channel #####

将Source数据直接写入内存，不安全，可能会导致数据丢失

<table> 
 <thead> 
  <tr> 
   <th>参数</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>只可以写<code>memory</code></td> 
  </tr> 
  <tr> 
   <td>capacity</td> 
   <td>100</td> 
   <td>通道中存储的最大事件数</td> 
  </tr> 
  <tr> 
   <td>transactionCapacity</td> 
   <td>100</td> 
   <td>每一次source或者Sink组件写入Channel或者读取Channel的批量大小</td> 
  </tr> 
 </tbody> 
</table>

> transactionCapacity <= capacity

a1.channels.c1.type = memory
    a1.channels.c1.capacity = 1000 
    a1.channels.c1.transactionCapacity = 100

##### JDBC Channel #####

<table> 
 <thead> 
  <tr> 
   <th>参数</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>组件类型名称，必须为jdbc</td> 
  </tr> 
  <tr> 
   <td>db.type</td> 
   <td>DERBY</td> 
   <td>数据库供应商，必须是DERBY。</td> 
  </tr> 
 </tbody> 
</table>

事件存储在数据库支持的持久性存储中。 JDBC通道当前支持嵌入式Derby。这是一种持久通道，非常适合可恢复性很重要的流程。-存储非常重要的数据，的时候可以使用jdbc channel

a1.channels.c1.type = jdbc

> 1、如果用户配置HIVE\_HOME环境，需要用户移除hive的lib下的derby或者flume的lib下的derby（仅仅删除一方即可）
> 
> 2、默认情况下，flume使用的是复制|广播模式的通道选择器。

##### Kafka Channel #####

<table> 
 <thead> 
  <tr> 
   <th>参数</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>组件类型名称，必须为org.apache.flume.channel.kafka.KafkaChannel</td> 
  </tr> 
  <tr> 
   <td><strong>kafka.bootstrap.servers</strong></td> 
   <td></td> 
   <td>该通道使用的Kafka集群中的Broker列表。</td> 
  </tr> 
  <tr> 
   <td>kafka.topic</td> 
   <td>flume-channel</td> 
   <td>该频道将使用的Kafka主题</td> 
  </tr> 
  <tr> 
   <td>kafka.consumer.group.id</td> 
   <td>flume</td> 
   <td>Consumer用于向Kafka注册的消费者组ID</td> 
  </tr> 
 </tbody> 
</table>

将Source采集的数据写入外围系统的Kafka集群。

a1.channels.c1.type = org.apache.flume.channel.kafka.KafkaChannel
    a1.channels.c1.kafka.bootstrap.servers = CentOS:9092
    a1.channels.c1.kafka.topic = topic_channel
    a1.channels.c1.kafka.consumer.group.id = g1

# 声明基本组件 Source Channel Sink  example10.properties
    a1.sources = s1
    a1.sinks = sk1
    a1.channels = c1
    
    # 配置Source组件,从Socket中接收文本数据
    a1.sources.s1.type = netcat
    a1.sources.s1.bind = CentOS
    a1.sources.s1.port = 44444
    
    # 配置Sink组件,将接收数据打印在日志控制台
    a1.sinks.sk1.type = logger
    
    # 配置Channel通道，主要负责数据缓冲
    a1.channels.c1.type = org.apache.flume.channel.kafka.KafkaChannel
    a1.channels.c1.kafka.bootstrap.servers = CentOS:9092
    a1.channels.c1.kafka.topic = topic_channel
    a1.channels.c1.kafka.consumer.group.id = g1
    
    # 进行组件间的绑定
    a1.sources.s1.channels = c1
    a1.sinks.sk1.channel = c1

##### File Channel #####

<table> 
 <thead> 
  <tr> 
   <th>参数</th> 
   <th>默认值</th> 
   <th>说明</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td><strong>type</strong></td> 
   <td></td> 
   <td>组件类型名称，必须是file</td> 
  </tr> 
  <tr> 
   <td>checkpointDir</td> 
   <td>~/.flume/file-channel/checkpoint</td> 
   <td>将存储检查点文件的目录</td> 
  </tr> 
  <tr> 
   <td>dataDirs</td> 
   <td>~/.flume/file-channel/data</td> 
   <td>用逗号分隔的目录列表，用于存储日志文件</td> 
  </tr> 
 </tbody> 
</table>

使用文件系统作为通道的实现，能够实现对缓冲数据的持久化。

a1.channels.c1.type = file
    a1.channels.c1.checkpointDir = /root/flume/checkpoint
    a1.channels.c1.dataDirs = /root/flume/data