HP superdome2刀片故障处理记录-实战篇

布满荆棘的人生 2023-10-04 21:51 44阅读 0赞

## 1、telnet控制台ip并输入用户名密码登录    ##

## 2、消除黄色告警指示灯 ##

OA-9C8E992A9825> show hr  
Health Repository - User Interface

2017-12-08 17:04 OA-9C8E992A9825 HR> help

Usage: help <command>  
Purpose:  
Show usage for command

Available commands:  
acquit - Submit an acquittal to the HR  
deconfigure - Submit a deconfiguration to the HR  
indict - Submit an indictment to the HR  
show - Show various reports from the HR  
dimmerr - Show DIMM error reports.  
clear - Clear HR data from a FRU  
chkloc - Check location for an indictment  
test - Run a test  
servicemode - Enable/Disable secure commands.  
start - Starts the specified cabled fabric link  
stop - Stops the specified cabled fabric link  
help - Show usage for command  
quit - Exit the HRUI  
exit - Exit the HRUI

2017-12-08 17:04 OA-9C8E992A9825 HR> show indict

System Indictment List (w/Deconfigurations) - Fri Dec 8 17:04:40 2017  
\--------------------------------------------------

FRU Type: Superdome Cell Blade  
Location: 0x0100FF06FFFFFF94 enclosure1/blade6  
Timestamp: Fri Dec 8 01:22:48 2017  
Indictment State: Indicted  
Requested Deconfig State: Configured  
Current Deconfig State: Configured

\--- end report --- 1 records shown  
To see details about a specific FRU, use 'show <loc>|<path>'

2017-12-08 17:04 OA-9C8E992A9825 HR> acquit 0x0100FF06FFFFFF94

Request acquittal...

## 3、显示par硬件状态 ##

OA-9C8E992A9825> parstatus

\[Complex\]

Complex Name: Complex 1  
Complex UUID: 3594b966-1b3d-11e1-8fc3-b39d2edf25cf  
Complex Capacity  
Compute Enclosure: 1  
IO Enclosure: 8  
Monarch OA Location: 1  
Model: N/A  
Original Serial Number: SGH514318P  
Current Product Order Number: AH337A  
OEM Manufacturer: N/A  
Total number of partitions present: 2

\[Compute Enclosure\]

Enclosure Enclosure Num Num Bay Enclosure  
Num Type Blades IOBays Slots Name  
========= ========= ====== ====== ===== ================================  
1 Compute 8 0 8 SGH5141AE3

\[Blade\]

Enclosure/ Usage/ CPU Memory Use Par Pending  
Blade Status\* OK/ (GB) On Num Deletion  
Indicted/ OK/ Next  
Deconf/ Indicted/ Boot  
Max Deconf  
========== ======================= ========= =============== ==== === ========  
1/1 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/2 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/3 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/4 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/5 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/6 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 1 no  
1/7 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 2 no  
1/8 Active Base /OK 8/0/0/8 32.0/0.0/0.0 yes 2 no

\* D-Deconfigured I-Indicted

\[IOBay\]

Enclosure/ Usage/ Par Pending  
IOBay Status\* Num Deletion  
========== ======================= === ========  
5/1 Empty /Invalid - -  
5/2 Empty /Invalid - -  
6/1 Empty /Invalid - -  
6/2 Empty /Invalid - -  
7/1 Empty /Invalid - -  
7/2 Empty /Invalid - -  
8/1 Empty /Invalid - -  
8/2 Empty /Invalid - -  
9/1 Active /OK 1 no  
9/2 Active /OK 2 no  
10/1 Empty /Invalid - -  
10/2 Empty /Invalid - -  
11/1 Empty /Invalid - -  
11/2 Empty /Invalid - -  
12/1 Empty /Invalid - -  
12/2 Empty /Invalid - -

\* D-Deconfigured I-Indicted

\[Partition\]

Par State/ Status\* \# of \# of ILM/ Partition Name  
Num RunState Blades IOBays SLM (first 15  
(GB)\*\* characters)  
=== ======================= ======= ====== ====== ============= ===============  
1 Active /MCA OK 6 1 23.0/168.0 Partition1-UX  
2 Active /UP OK 2 1 6.0/56.0 Partition2-UX

\* D-Degraded  
\*\* Actual allocated for Active and User requested for Inactive partitions

## 4、显示硬件状态 ##

show iox status all  
show xfm status all

## 5、重启par ##

OA-9C8E992A9825> rs

This command resets the selected partition.

WARNING: Execution of this command irrecoverably halts all system  
processing and I/O activity and restarts the selected  
partition.

Partition Partition  
Number Name  
\--------- ---------  
1 Partition1-UX  
2 Partition2-UX  
Q) Quit

Select partition number: 1

Do you want to reset partition 1? (Y/\[N\])y

\-> Forced reboot request sent to partition 1. Operation initiated successfully.  
Please run PARSTATUS/VPARSTATUS or SHOW SYSLOG OA to determine the completion  
status of the operation.

## 6、连接par ##

OA-9C8E992A9825> co  
然后选择par的序列号，然后回车

## 7、查看硬件状态 ##

ioscan -fnCdisk  
ioscan -fnClan

## 8、查看系统日志 ##

tail -n 5000 /var/adm/syslog/syslog.log|more

## 9、日志收集脚本 ##

getsys  
nickel