calico报错： Calico node 'node1' is already using the IPv4 address

梦里梦外; 2023-07-17 04:41 16阅读 0赞

使用k8s的过程中，发现一台曾经安装过harbor（后来清理掉了）的服务器的calico组件一直报错：

2020-03-19 07:11:07.934 [INFO][11] startup.go 572: Using autodetected IPv4 address on interface br-11af8abf2c68: 172.19.0.1/16
    2020-03-19 07:11:07.934 [INFO][11] startup.go 440: Node IPv4 changed, will check for conflicts
    2020-03-19 07:11:07.942 [WARNING][11] startup.go 851: Calico node 'node1' is already using the IPv4 address 172.19.0.1.
    2020-03-19 07:11:07.942 [INFO][11] startup.go 198: Clearing out-of-date IPv4 address from this node IP="172.19.0.1/16"
    2020-03-19 07:11:07.953 [WARNING][11] startup.go 1004: Terminating

其中br-11af8abf2c68是一个网桥，可是安装过程中，并未配置网桥。于是仔细检查，发现这是由harbor安装的，造成了calico网络的混乱，于是执行如下操作：

root@node1:~# docker network ls
    NETWORK ID          NAME                                  DRIVER              SCOPE
    4b4c7575bfe9        bridge                                bridge              local
    bfe39862a83f        harbor-arm64-193_harbor               bridge              local
    17676ffcbc56        harbor-arm64-193_harbor-chartmuseum   bridge              local
    1ce62bb8f687        host                                  host                local
    3d97578ea0f5        make_harbor                           bridge              local
    62111cce557a        make_harbor-chartmuseum               bridge              local
    8877ee09ebf1        none                                  null                local

发现果然有harbor遗存，执行如下操作进行删除

root@node1:~# docker network remove bfe39862a83f
    bfe39862a83f
    root@node1:~# docker network remove 17676ffcbc56
    17676ffcbc56
    root@node1:~# docker network remove 3d97578ea0f5
    3d97578ea0f5
    root@node1:~# docker network remove 62111cce557a
    62111cce557a

再执行docker network ls已经看不到harbor的网桥了

重启calico对应的pod，故障消除

另外，还有个删除网桥的脚本，仅供参考

#!/bin/bash
    
    for i in `ifconfig|grep br-|awk {'print $1'}`
    do
        `ifconfig $i down`
        `brctl delbr $i`
    echo $i
    done