freeradius安装与测试

╰+哭是因爲堅強的太久メ 2023-06-30 10:46 9阅读 0赞

[freeradius官网][freeradius]

[freeradius的github][freeradius_github]

[安装办法][Link 1]

[非源码安装][Link 2]

例如ubuntu：

For Bionic Beaver (18.04), add to your apt source list (/etc/apt/sources.list):

deb http://packages.networkradius.com/releases/ubuntu-bionic bionic main

sudo apt-key adv --keyserver keys.gnupg.net --recv-key 0x41382202
    sudo apt-get update
    sudo apt-get install freeradius

启动服务：`/etc/init.d/freeradius start`

调试启动：`freeradius -X`

源码安装：

`git clone https://github.com/FreeRADIUS/freeradius-server.git`

进入目录

切换到3.0版本

git checkout -b git checkout -b release\_3\_0\_20

git pull

执行

`./configure`

发现少了两个依赖，一次安装。

`sudo apt-get install libtalloc-dev`

`sudo apt-get install libkqueue-dev`

make

sudo make install

使用ubtuntu的apt-get方式来安装freeradius的位置会和源码不同、源码安装的默认位置是

/usr/local/etc/raddb/

而使用ubuntu的apt-get方式的配置文件则安置在

/etc/freeradius/

官方给的简单测试方式：

然后修改/etc/freeradius/下的users文件把这段注释去掉

steve   Cleartext-Password := "testing"
        Service-Type = Framed-User,
        Framed-Protocol = PPP,
        Framed-IP-Address = 172.16.3.33,
        Framed-IP-Netmask = 255.255.255.0,
        Framed-Routing = Broadcast-Listen,
        Framed-Filter-Id = "std.ppp",
        Framed-MTU = 1500,
        Framed-Compression = Van-Jacobsen-TCP-IP

执行`freeradius -X`

在另一个终端：`radtest testing localhost 1812 testing123`

## vi users 用户配置
    #两个字符串分别是验证时输入的身份和密码
    "hzlarm" Cleartext-Password := "hzlarm123"
    
     
    ## clients.conf 配置客户端的密码以下是默认的,本机测试，配置这个点即可：client localhost 
     secret      = testing123
    ##如果是联网测试，往下找类似字段进行修改，指定的外网ip以及设定一个密码。
    ##这个密码是配置fitap时的密码，同样要输入的是radius服务器的ip与端口。这ip不清楚地话可以随意设置，
    ##等开启freeradius -X以及配置好fitap指向radius，服务器端会报错忽略某某ip，然后填入这个ip即可。
    ##设置为0.0.0.0/0任何ip都可以
    client private-network-1 { 
           ipaddr          = xxx.87.xx.12/24
           secret          = testing123
    
      
    ## etc/raddb/sites-enabled/default or etc/freeradius/sites-enabled/default
    ## 配置验证和授权的方式，计费可不考虑，这次不测是到这个点；确认开启了以下几个方式
    pap
    eap
    chap
    mschap

#### 其他配置方案测试： ####

##### pap： #####

`radtest hzlarm hzlarm123 127.0.0.1 1812 testing123`

##### eap-md5： #####

# radeapclient -x 127.0.0.1 auth testing123 < eap-md5.txt
    # 以下内容写在eap-md5.txtf文件
    
    User-Name = "hzlarm "
    Cleartext-Password = "hzlarm123"
    EAP-Code = Response
    EAP-Id = 210
    EAP-Type-Identity = "ufiletest"
    Message-Authenticator = 0x00

##### peap-mschapv2： #####

# eapol_test -c peap-mschapv2.conf -s testing123
    # 以下内容写在peap-mschapv2.conf文件
    
    network={ 
            ssid="example"
            key_mgmt=WPA-EAP
            eap=PEAP
            identity="hzlarm"
            anonymous_identity="anonymous"
            password="hzlarm123"
            phase2="autheap=MSCHAPV2"
    
    # Uncomment the following to perform server certificate validation.
    # ca_cert="/etc/freeradius/certs/ca.der"
    }

安装测试工具eapol\_test

cd /usr/local/src/
    wget https://w1.fi/releases/wpa_supplicant-2.9.tar.gz
    tar –xzvf wpa_supplicant-2.9.tar.gz
    cd wpa_supplicant-2.9/wpa_supplicant/
    cp defconfig .config
    make eapol_test
    #报错执行
    #sudo apt-get install libdbus-1-dev
    #sudo apt-get install libnl-3-dev libnl-genl-3-200 libnl-genl-3-dev libnl-idiag-3-dev
    cp eapol_test /usr/local/bin/

##### eap-tls: #####

# sudo eapol_test -c eap-tls.conf -a 127.0.0.1 -p 1812 -s testing123 -r 1
    # 以下内容写在eap-tls.conf文件
    
    network={ 
        eap=TLS
        eapol_flags=0
        key_mgmt=IEEE8021X
        identity="hzlarm"
        password="hzlarm123"
    
        # client 
        ca_cert="/etc/freeradius/certs/ca.pem"
        client_cert="/etc/freeradius/certs/client.pem"
        private_key="/etc/freeradius/certs/client.key"
        private_key_passwd="whatever"
    
        # server
        #ca_cert="/etc/freeradius/certs/ca.pem"
        #client_cert="/etc/freeradius/certs/server.pem"
        #private_key="/etc/freeradius/certs/server.key"
        #private_key_passwd="whatever"
    }

##### ttls-chap: #####

# eapol_test -c ttls-chap.conf -s testing123
    # 以下内容写在ttls-chap.conf文件
    network={ 
            ssid="example"
            key_mgmt=WPA-EAP
            eap=TTLS
            identity="hzlarm"
            anonymous_identity="anonymous"
            password="hzlarm123"
            phase2="auth=CHAP"
    
    # Uncomment the following to perform server certificate validation.
    # ca_cert="/etc/freeradius/certs/ca.der"
    }

##### ttls-eapmd5: #####

#
    # eapol_test -c ttls-eapmd5.conf -s testing123
    #
    network={ 
            ssid="example"
            key_mgmt=WPA-EAP
            eap=TTLS
            identity="hzlarm"
            anonymous_identity="anonymous"
            password="hzlarm123"
            phase2="autheap=MD5"
    
    # Uncomment the following to perform server certificate validation.
    # ca_cert="/etc/freeradius/certs/ca.der"
    }

##### ttls-mschapv2: #####

#
    # eapol_test -c ttls-mschapv2.conf -s testing123
    #
    network={ 
        ssid="example"
        key_mgmt=WPA-EAP
        eap=TTLS
        identity="hzlarm"
        anonymous_identity="anonymous"
        password="hzlarm123"
        phase2="autheap=MSCHAPV2"
    
        # Uncomment the following to perform server certificate validation.
        #ca_cert="/etc/freeradius/certs/ca.pem"
    }

##### ttls-pap: #####

#
    # eapol_test -c ttls-pap.conf -s testing123
    #
    network={ 
            ssid="example"
            key_mgmt=WPA-EAP
            eap=TTLS
            identity="hzlarm"
            anonymous_identity="anonymous"
            password="hzlarm123"
            phase2="auth=PAP"
     
    # Uncomment the following to perform server certificate validation.
    # ca_cert="/etc/freeradius/certs/ca.der"
    }

#eap的配置文件，默认tls，ttls,peap都包含，不需要的可以把相应的字段注释掉即可。
    ## /etc/raddb/eap.conf or/etc/freeradius/mods-available/eap
    
    # -*- text -*-
    ##
    ## eap.conf -- Configuration for EAP types (PEAP, TTLS, etc.)
    ##
    ## $Id$
    
    
    eap { 
        #eap未指定时，默认的类型。
        default_eap_type = peap
        #default_eap_type = ttls
        #default_eap_type = tls
    
        #关联EAP请求数据包的列表，超时会被删除。
        timer_expire     = 60
    
        #是否忽略不支持的eap请求。
        ignore_unknown_eap_types = no
    
        # Cisco 用户名bug
        cisco_accounting_username_bug = no
    
        #限制服务器正在跟踪的会话数，有助于防止DoS攻击。此命令取自radiusdus.conf中的“max_requests”指令。
        max_sessions = ${max_requests}
    
        # Supported EAP-types
        ## EAP-TLS
        tls { 
            #
            # These is used to simplify later configurations.
            #
            certdir = ${confdir}/certs
            cadir = ${confdir}/certs
    
            #private_key_password = whatever
            private_key_file = ${certdir}/srv.key
    
            certificate_file = ${certdir}/srv.crt
    
            CA_file = ${cadir}/ca.crt
    
            #
            # For DH cipher suites to work, you have to
            # run OpenSSL to create the DH file first:
            #
            # openssl dhparam -out certs/dh 1024
            #
            dh_file = ${certdir}/dh
            random_file = /dev/urandom
    
            # fragment_size = 1024
            # include_length = yes
            # check_crl = yes
    
            # check_all_crl = yes
    
            CA_path = ${cadir}
    
            # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd"
            # check_cert_cn = %{User-Name}
            cipher_list = "DEFAULT"
            # virtual_server = check-eap-tls
    
            #使用freeradius -X调试时,默认使用该命令生成证书。
            make_cert_command = "${certdir}/bootstrap"
            ecdh_curve = "prime256v1"
            cache { 
                enable = no
                lifetime = 24 # hours
                max_entries = 255
            }
            verify { 
                #tmpdir = /tmp/radiusd
                #client = "/path/to/openssl verify -CApath ${..CA_path} %{TLS-Client-Cert-Filename}"
            }
            ocsp { 
                enable = no
                override_cert_url = yes
                url = "http://127.0.0.1/ocsp/"
            }
        }
    
        #PEAP模块需要安装TLS模块并进行配置，以便使用TLS隧道在EAP数据包内。TTLS不需要客户端证书
        # You can make PEAP require a client cert by setting
        # EAP-TLS-Require-Client-Cert = Yes
        peap { 
            default_eap_type = mschapv2
            copy_request_to_tunnel = no
            use_tunneled_reply = no
            # proxy_tunneled_request_as_eap = yes
            virtual_server = "inner-tunnel"
            # soh = yes
            # soh_virtual_server = "soh-server"
        }
        
        #TTLS模块需要安装TLS模块并进行配置，以便使用TLS隧道在EAP数据包内。TTLS不需要客户端证书
        # You can make TTLS require a client cert by setting
        # EAP-TLS-Require-Client-Cert = Yes
        ttls { 
            default_eap_type = md5 
            # allowed values: {no, yes}
            copy_request_to_tunnel = no
            # allowed values: {no, yes}
            use_tunneled_reply = no
    
            virtual_server = "inner-tunnel"
            # include_length = yes
        }   
    
        #
        # This takes no configuration.
        #
        mschapv2 { 
        # send_error = no
        }
        md5 { 
        }
        gtc{ 
        }
    }

[freeradius]: https://freeradius.org/
[freeradius_github]: https://github.com/FreeRADIUS/freeradius-server
[Link 1]: https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modules/installation/pages/index.adoc
[Link 2]: https://networkradius.com/freeradius-packages/