简单监测iOS卡顿的demo

客官°小女子只卖身不卖艺 2023-06-15 11:14 19阅读 0赞

## 前言 ##

本文的demo代码也会更新到[github][]上。

做这个demo思路来源于微信team的：[微信iOS卡顿监控系统][iOS]。  
主要思路:通过监测Runloop的kCFRunLoopAfterWaiting，用一个子线程去检查，一次循环是否时间太长。  
其中主要涉及到了runloop的原理。关于整个原理：[深入理解RunLoop][RunLoop]讲解的比较仔细。  
以下就是runloop大概的运行方式：

/// 1. 通知Observers，即将进入RunLoop
        /// 此处有Observer会创建AutoreleasePool: _objc_autoreleasePoolPush();
        __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopEntry);
        do {
     
            /// 2. 通知 Observers: 即将触发 Timer 回调。
            __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopBeforeTimers);
            /// 3. 通知 Observers: 即将触发 Source (非基于port的,Source0) 回调。
            __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopBeforeSources);
            __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__(block);
     
            /// 4. 触发 Source0 (非基于port的) 回调。
            __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__(source0);
    
            /// 5. GCD处理main block
            __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__(block);
     
            /// 6. 通知Observers，即将进入休眠
            /// 此处有Observer释放并新建AutoreleasePool: _objc_autoreleasePoolPop(); _objc_autoreleasePoolPush();
            __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopBeforeWaiting);
     
            /// 7. sleep to wait msg.
            mach_msg() -> mach_msg_trap();
            
     
            /// 8. 通知Observers，线程被唤醒
            __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopAfterWaiting);
     
            /// 9. 如果是被Timer唤醒的，回调Timer
            __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__(timer);
     
            /// 9. 如果是被dispatch唤醒的，执行所有调用 dispatch_async 等方法放入main queue 的 block
            __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__(dispatched_block);
     
            /// 9. 如果如果Runloop是被 Source1 (基于port的) 的事件唤醒了，处理这个事件
            __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__(source1);
     
     
        } while (...);
     
        /// 10. 通知Observers，即将退出RunLoop
        /// 此处有Observer释放AutoreleasePool: _objc_autoreleasePoolPop();
        __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__(kCFRunLoopExit);
    }

其中UI主要集中在`__CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__(source0);`  
和`__CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__(source1);`之前。  
获取`kCFRunLoopBeforeSources`到`kCFRunLoopBeforeWaiting`再到`kCFRunLoopAfterWaiting`的状态就可以知道是否有卡顿的情况。

## NSTimer的实现 ##

具体代码如下：

//
    //  MonitorController.h
    //  RunloopMonitorDemo
    //
    //  Created by game3108 on 16/4/13.
    //  Copyright © 2016年 game3108. All rights reserved.
    //
    
    #import <Foundation/Foundation.h>
    
    @interface MonitorController : NSObject
    + (instancetype) sharedInstance;
    - (void) startMonitor;
    - (void) endMonitor;
    - (void) printLogTrace;
    @end

//
    //  MonitorController.m
    //  RunloopMonitorDemo
    //
    //  Created by game3108 on 16/4/13.
    //  Copyright © 2016年 game3108. All rights reserved.
    //
    
    #import "MonitorController.h"
    #include <libkern/OSAtomic.h>
    #include <execinfo.h>
    
    @interface MonitorController(){
        CFRunLoopObserverRef _observer;
        double _lastRecordTime;
        NSMutableArray *_backtrace;
    }
    
    @end
    
    @implementation MonitorController
    
    static double _waitStartTime;
    
    + (instancetype) sharedInstance{
        static dispatch_once_t once;
        static id sharedInstance;
        dispatch_once(&once, ^{
            sharedInstance = [[self alloc] init];
        });
        return sharedInstance;
    }
    
    - (void) startMonitor{
        [self addMainThreadObserver];
        [self addSecondaryThreadAndObserver];
    }
    
    - (void) endMonitor{
        if (!_observer) {
            return;
        }
        CFRunLoopRemoveObserver(CFRunLoopGetMain(), _observer, kCFRunLoopCommonModes);
        CFRelease(_observer);
        _observer = NULL;
    }
    
    #pragma mark printLogTrace
    - (void)printLogTrace{
        NSLog(@"====================堆栈\n %@ \n",_backtrace);
    }
    
    #pragma mark addMainThreadObserver
    - (void) addMainThreadObserver {
        dispatch_async(dispatch_get_main_queue(), ^{
            //建立自动释放池
            @autoreleasepool {
                //获得当前thread的Run loop
                NSRunLoop *myRunLoop = [NSRunLoop currentRunLoop];
                
                //设置Run loop observer的运行环境
                CFRunLoopObserverContext context = {0, (__bridge void *)(self), NULL, NULL, NULL};
                
                //创建Run loop observer对象
                //第一个参数用于分配observer对象的内存
                //第二个参数用以设置observer所要关注的事件，详见回调函数myRunLoopObserver中注释
                //第三个参数用于标识该observer是在第一次进入run loop时执行还是每次进入run loop处理时均执行
                //第四个参数用于设置该observer的优先级
                //第五个参数用于设置该observer的回调函数
                //第六个参数用于设置该observer的运行环境
                _observer = CFRunLoopObserverCreate(kCFAllocatorDefault, kCFRunLoopAllActivities, YES, 0, &myRunLoopObserver, &context);
                
                if (_observer) {
                    //将Cocoa的NSRunLoop类型转换成Core Foundation的CFRunLoopRef类型
                    CFRunLoopRef cfRunLoop = [myRunLoop getCFRunLoop];
                    //将新建的observer加入到当前thread的run loop
                    CFRunLoopAddObserver(cfRunLoop, _observer, kCFRunLoopDefaultMode);
                }
            }
        });
    }
    
    void myRunLoopObserver(CFRunLoopObserverRef observer, CFRunLoopActivity activity, void *info) {
        switch (activity) {
                //The entrance of the run loop, before entering the event processing loop.
                //This activity occurs once for each call to CFRunLoopRun and CFRunLoopRunInMode
            case kCFRunLoopEntry:
                NSLog(@"run loop entry");
                break;
                //Inside the event processing loop before any timers are processed
            case kCFRunLoopBeforeTimers:
                NSLog(@"run loop before timers");
                break;
                //Inside the event processing loop before any sources are processed
            case kCFRunLoopBeforeSources:
                NSLog(@"run loop before sources");
                break;
                //Inside the event processing loop before the run loop sleeps, waiting for a source or timer to fire.
                //This activity does not occur if CFRunLoopRunInMode is called with a timeout of 0 seconds.
                //It also does not occur in a particular iteration of the event processing loop if a version 0 source fires
            case kCFRunLoopBeforeWaiting:{
                _waitStartTime = 0;
                NSLog(@"run loop before waiting");
                break;
            }
                //Inside the event processing loop after the run loop wakes up, but before processing the event that woke it up.
                //This activity occurs only if the run loop did in fact go to sleep during the current loop
            case kCFRunLoopAfterWaiting:{
                _waitStartTime = [[NSDate date] timeIntervalSince1970];
                NSLog(@"run loop after waiting");
                break;
            }
                //The exit of the run loop, after exiting the event processing loop.
                //This activity occurs once for each call to CFRunLoopRun and CFRunLoopRunInMode
            case kCFRunLoopExit:
                NSLog(@"run loop exit");
                break;
                /*
                 A combination of all the preceding stages
                 case kCFRunLoopAllActivities:
                 break;
                 */
            default:
                break;
        }
    }
    
    #pragma mark addSecondaryThreadAndObserver
    - (void) addSecondaryThreadAndObserver{
        NSThread *thread = [self secondaryThread];
        [self performSelector:@selector(addSecondaryTimer) onThread:thread withObject:nil waitUntilDone:YES];
    }
    
    - (NSThread *)secondaryThread {
        static NSThread *_secondaryThread = nil;
        static dispatch_once_t oncePredicate;
        dispatch_once(&oncePredicate, ^{
            _secondaryThread =
            [[NSThread alloc] initWithTarget:self
                                    selector:@selector(networkRequestThreadEntryPoint:)
                                      object:nil];
            [_secondaryThread start];
        });
        return _secondaryThread;
    }
    
    - (void)networkRequestThreadEntryPoint:(id)__unused object {
        @autoreleasepool {
            [[NSThread currentThread] setName:@"monitorControllerThread"];
            NSRunLoop *runLoop = [NSRunLoop currentRunLoop];
            [runLoop addPort:[NSMachPort port] forMode:NSRunLoopCommonModes];
            [runLoop run];
        }
    }
    
    - (void) addSecondaryTimer{
        NSTimer *myTimer = [NSTimer timerWithTimeInterval:0.5 target:self selector:@selector(timerFired:) userInfo:nil repeats:YES];
        [[NSRunLoop currentRunLoop] addTimer:myTimer forMode:NSDefaultRunLoopMode];
    }
    
    - (void)timerFired:(NSTimer *)timer{
        if ( _waitStartTime < 1 ){
            return;
        }
        double currentTime = [[NSDate date] timeIntervalSince1970];
        double timeDiff = currentTime - _waitStartTime;
        if (timeDiff > 2.0){
            if (_lastRecordTime - _waitStartTime < 0.001 && _lastRecordTime != 0){
                NSLog(@"last time no :%f %f",timeDiff, _waitStartTime);
                return;
            }
            [self logStack];
            _lastRecordTime = _waitStartTime;
        }
    }
    
    - (void)logStack{
        void* callstack[128];
        int frames = backtrace(callstack, 128);
        char **strs = backtrace_symbols(callstack, frames);
        int i;
        _backtrace = [NSMutableArray arrayWithCapacity:frames];
        for ( i = 0 ; i < frames ; i++ ){
            [_backtrace addObject:[NSString stringWithUTF8String:strs[i]]];
        }
        free(strs);
    }
    
    @end

主要内容是首先在主线程注册了runloop observer的回调`myRunLoopObserver`  
每次小循环都会记录一下`kCFRunLoopAfterWaiting`的时间`_waitStartTime`，并且在`kCFRunLoopBeforeWaiting`制空。

另外开了一个子线程并开启他的runloop（模仿了AFNetworking的方式），并加上一个timer每隔1秒去进行监测。

如果当前时长与`_waitStartTime`差距大于2秒，则认为有卡顿情况，并记录了当前堆栈信息。

PS:整个demo写的比较简单，最后获取堆栈也仅获取了当前线程的堆栈信息(`[NSThread callStackSymbols]`有同样效果)，也在寻找获取所有线程堆栈的方法，欢迎指点一下。

--------------------

更新：

了解到 plcrashreporter ([github地址][github 1]) 可以做到获取所有线程堆栈。

--------------------

更新2:

这篇文章也介绍了监测卡顿的方法：[检测iOS的APP性能的一些方法][iOS_APP]  
通过Dispatch Semaphore保证同步这里记录一下。

写一个Semaphore版本的代码，也放在[github][]上：

//
    //  SeMonitorController.h
    //  RunloopMonitorDemo
    //
    //  Created by game3108 on 16/4/14.
    //  Copyright © 2016年 game3108. All rights reserved.
    //
    
    #import <Foundation/Foundation.h>
    
    @interface SeMonitorController : NSObject
    + (instancetype) sharedInstance;
    - (void) startMonitor;
    - (void) endMonitor;
    - (void) printLogTrace;
    @end

//
    //  SeMonitorController.m
    //  RunloopMonitorDemo
    //
    //  Created by game3108 on 16/4/14.
    //  Copyright © 2016年 game3108. All rights reserved.
    //
    
    #import "SeMonitorController.h"
    #import <libkern/OSAtomic.h>
    #import <execinfo.h>
    
    @interface SeMonitorController(){
        CFRunLoopObserverRef _observer;
        dispatch_semaphore_t _semaphore;
        CFRunLoopActivity _activity;
        NSInteger _countTime;
        NSMutableArray *_backtrace;
    }
    
    @end
    
    @implementation SeMonitorController
    
    + (instancetype) sharedInstance{
        static dispatch_once_t once;
        static id sharedInstance;
        dispatch_once(&once, ^{
            sharedInstance = [[self alloc] init];
        });
        return sharedInstance;
    }
    
    - (void) startMonitor{
        [self registerObserver];
    }
    
    - (void) endMonitor{
        if (!_observer) {
            return;
        }
        CFRunLoopRemoveObserver(CFRunLoopGetMain(), _observer, kCFRunLoopCommonModes);
        CFRelease(_observer);
        _observer = NULL;
    }
    
    - (void) printLogTrace{
        NSLog(@"====================堆栈\n %@ \n",_backtrace);
    }
    
    static void runLoopObserverCallBack(CFRunLoopObserverRef observer, CFRunLoopActivity activity, void *info)
    {
        SeMonitorController *instrance = [SeMonitorController sharedInstance];
        instrance->_activity = activity;
        // 发送信号
        dispatch_semaphore_t semaphore = instrance->_semaphore;
        dispatch_semaphore_signal(semaphore);
    }
    
    - (void)registerObserver
    {
        CFRunLoopObserverContext context = {0,(__bridge void*)self,NULL,NULL};
        _observer = CFRunLoopObserverCreate(kCFAllocatorDefault,
                                                                kCFRunLoopAllActivities,
                                                                YES,
                                                                0,
                                                                &runLoopObserverCallBack,
                                                                &context);
        CFRunLoopAddObserver(CFRunLoopGetMain(), _observer, kCFRunLoopCommonModes);
        
        // 创建信号
        _semaphore = dispatch_semaphore_create(0);
        
        // 在子线程监控时长
        dispatch_async(dispatch_get_global_queue(0, 0), ^{
            while (YES)
            {
                // 假定连续5次超时50ms认为卡顿(当然也包含了单次超时250ms)
                long st = dispatch_semaphore_wait(_semaphore, dispatch_time(DISPATCH_TIME_NOW, 50*NSEC_PER_MSEC));
                if (st != 0)
                {
                    if (_activity==kCFRunLoopBeforeSources || _activity==kCFRunLoopAfterWaiting)
                    {
                        if (++_countTime < 5)
                            continue;
                        [self logStack];
                        NSLog(@"something lag");
                    }
                }
                _countTime = 0;
            }
        });
    }
    
    - (void)logStack{
        void* callstack[128];
        int frames = backtrace(callstack, 128);
        char **strs = backtrace_symbols(callstack, frames);
        int i;
        _backtrace = [NSMutableArray arrayWithCapacity:frames];
        for ( i = 0 ; i < frames ; i++ ){
            [_backtrace addObject:[NSString stringWithUTF8String:strs[i]]];
        }
        free(strs);
    }
    
    @end

用Dispatch Semaphore简化了代码复杂度，更加简洁。

## 参考资料 ##

[本文csdn地址][csdn]  
1.[微信iOS卡顿监控系统][iOS]  
2.[ ][Link 1][iphone——使用run loop对象][Link 1]  
3.[深入理解RunLoop][RunLoop]  
4.[检测iOS的APP性能的一些方法][iOS_APP]  
5.[iOS实时卡顿监控][iOS 1]

151人点赞

iOS开发

作者：game3108  
链接：https://www.jianshu.com/p/71cfbcb15842  
来源：简书  
著作权归作者所有。商业转载请联系作者获得授权，非商业转载请注明出处。

[github]: https://link.jianshu.com?t=https://github.com/game3108/RunloopMonitorDemo
[iOS]: https://link.jianshu.com?t=http://mp.weixin.qq.com/s?__biz=MzAwNDY1ODY2OQ==&mid=207890859&idx=1&sn=e98dd604cdb854e7a5808d2072c29162&scene=4#wechat_redirect
[RunLoop]: https://link.jianshu.com?t=http://blog.ibireme.com/2015/05/18/runloop/
[github 1]: https://link.jianshu.com?t=https://github.com/plausiblelabs/plcrashreporter
[iOS_APP]: https://link.jianshu.com?t=http://www.starming.com/index.php?v=index&view=91
[csdn]: https://link.jianshu.com?t=http://blog.csdn.net/game3108/article/details/51147946
[Link 1]: https://link.jianshu.com?t=http://blog.csdn.net/lingedeng/article/details/6870692
[iOS 1]: https://link.jianshu.com?t=http://www.tanhao.me/code/151113.html/?hmsr=toutiao.io&utm_medium=toutiao.io&utm_source=toutiao.io