Linux 环境下安装部署 Weblogic

喜欢ヅ旅行 2023-03-03 06:25 214阅读 0赞

1.  ##### 环境准备 #####
    
    1.  配置 java 环境变量
        
            export JAVA_HOME=/usr/local/java
            export PATH=$JAVA_HOME/bin:$PATH
            export CLASSPATH=$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tool.jar:$CLASSPATH
    2.  创建 weblogic 用户及用户组
        
            [root@node00 ~]# mkdir -p /u01/weblogic
            [root@node00 ~]# ll
            [root@node00 ~]# groupadd weblogic
            [root@node00 ~]# useradd -g weblogic -d /u01/weblogic weblogic
            [root@node00 ~]# passwd weblogic
            [root@node00 ~]# chown -R weblogic:weblogic /u01/
    3.  下载 weblogic 安装包  
        下载地址: https://www.oracle.com/middleware/technologies/weblogic-server-installers-downloads.html
2.  ##### 安装部署 Weblogic #####
    
    **注意:** 需以 weblogic 用户安装
    
        [root@node00 u01]# su - weblogic
        -bash-4.2$ java -d64 -jar wls1036_generic.jar -mode=console
        
        
        Extracting 0%....................................................................................................100%
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Welcome:
        --------
        
        This installer will guide you through the installation of WebLogic 10.3.6.0. 
        Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".
        
        
        
        
        Enter [Exit][Next]> #键入next（或n），或按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Choose Middleware Home Directory:
        ---------------------------------
        
            "Middleware Home" = [Enter new value or use default 
        "/root/Oracle/Middleware"]
        
        
        
        
        Enter new Middleware Home OR [Exit][Previous][Next]> /u01/weblogic        
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Choose Middleware Home Directory:
        ---------------------------------
        
            "Middleware Home" = [/u01/weblogic]
        
        Use above value or select another option:
            1 - Enter new Middleware Home
            2 - Change to default [/root/Oracle/Middleware]
        
        
        
        
        Enter option number to select OR [Exit][Previous][Next]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Register for Security Updates:
        ------------------------------
        
        Provide your email address for security updates and  to initiate configuration manager.
        
           1|Email:[]
           2|Support Password:[]
           3|Receive Security Update:[Yes]
        
        
        
        Enter index number to select OR [Exit][Previous][Next]> 3
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Register for Security Updates:
        ------------------------------
        
        Provide your email address for security updates and  to initiate configuration manager.
        
            "Receive Security Update:" = [Enter new value or use default "Yes"]
        
        
        
        Enter [Yes][No]? No
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Register for Security Updates:
        ------------------------------
        
        Provide your email address for security updates and  to initiate configuration manager.
        
            "Receive Security Update:" = [Enter new value or use default "Yes"]
        
        
            ** Do you wish to bypass initiation of the configuration manager and
            **  remain uninformed of critical security issues in your configuration?
        
        
        Enter [Yes][No]? Yes
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Register for Security Updates:
        ------------------------------
        
        Provide your email address for security updates and  to initiate configuration manager.
        
           1|Email:[]
           2|Support Password:[]
           3|Receive Security Update:[No]
        
        
        
        Enter index number to select OR [Exit][Previous][Next]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Choose Install Type:
        --------------------
        
        Select the type of installation you wish to perform. 
        
         ->1|Typical
            |  Install the following product(s) and component(s):
            | - WebLogic Server
            | - Oracle Coherence
        
           2|Custom
            |  Choose software products and components to install and perform optional 
            |configuration.
        
        
        
        
        
        Enter index number to select OR [Exit][Previous][Next]> 2
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Choose Products and Components:
        -------------------------------
        
            Release 10.3.6.0
            |_____WebLogic Server [1] x
            |    |_____Core Application Server [1.1] x
            |    |_____Administration Console [1.2] x
            |    |_____Configuration Wizard and Upgrade Framework [1.3] x
            |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
            |    |_____WebLogic SCA [1.5] x
            |    |_____WebLogic JDBC Drivers [1.6] x
            |    |_____Third Party JDBC Drivers [1.7] x
            |    |_____WebLogic Server Clients [1.8] x
            |    |_____WebLogic Web Server Plugins [1.9] x
            |    |_____UDDI and Xquery Support [1.10] x
            |    |_____Server Examples [1.11] 
            |    |_____Evaluation Database [1.12] x
            |_____Oracle Coherence [2] x
                 |_____Coherence Product Files [2.1] x
                 |_____Coherence Examples [2.2] 
        
            *Estimated size of installation: 690.2 MB
        
        
        
        
        Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        JDK Selection (Any * indicates Oracle Supplied VM):
        ---------------------------------------------------
        
        JDK(s) chosen will be installed.  Defaults will be used in script string-substitution if installed.
        
           1|Add Local Jdk
           2|/usr/java/jdk1.8.0_181-cloudera[x]
        
        
        
           *Estimated size of installation:  690.2 MB
        
        
        Enter 1 to add or >= 2 to toggle selection  OR [Exit][Previous][Next]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Choose Product Installation Directories:
        ----------------------------------------
        
        Middleware Home Directory: [/u01/weblogic]
        
        Product Installation Directories:
        
        
           1|WebLogic Server: [/u01/weblogic/wlserver_10.3]
           2|Oracle Coherence: [/u01/weblogic/coherence_3.7]
        
        
        
        
        Enter index number to select OR [Exit][Previous][Next]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        The following Products and JDKs will be installed:
        --------------------------------------------------
        
            WebLogic Platform 10.3.6.0
            |_____WebLogic Server
            |    |_____Core Application Server
            |    |_____Administration Console
            |    |_____Configuration Wizard and Upgrade Framework
            |    |_____Web 2.0 HTTP Pub-Sub Server
            |    |_____WebLogic SCA
            |    |_____WebLogic JDBC Drivers
            |    |_____Third Party JDBC Drivers
            |    |_____WebLogic Server Clients
            |    |_____WebLogic Web Server Plugins
            |    |_____UDDI and Xquery Support
            |    |_____Evaluation Database
            |_____Oracle Coherence
                 |_____Coherence Product Files
        
            *Estimated size of installation: 690.3 MB
        
        
        
        
        Enter [Exit][Previous][Next]> #按Enter键继续安装过程
        Jul 30, 2020 1:05:29 PM java.util.prefs.FileSystemPreferences$1 run
        INFO: Created user preferences directory.
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Installing files..
        
        0%          25%          50%          75%          100%
        [------------|------------|------------|------------]
        [***************************************************]
        
        
        Performing String Substitutions... 
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Configuring OCM...
        
        0%          25%          50%          75%          100%
        [------------|------------|------------|------------]
        [***************************************************]
        
        
        Creating Domains...
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Installation Complete
        
        
        Congratulations! Installation is complete.
        
        
        Press [Enter] to continue or type [Exit]> #按Enter键继续安装过程
        
        
        
        
        
        <-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
        
        Clean up process in progress ...
3.  ##### 配置weblogic server环境 #####
    
    1.  ###### 进入安装目录 ######
        
            -bash-4.2$ cd /u01/weblogic/wlserver_10.3/common/bin/
            -bash-4.2$ ll
            total 112
            -rwxr-x--- 1 weblogic weblogic 22731 Jul 30 13:11 commEnv.sh
            -rwxr-x--- 1 weblogic weblogic  2110 Jul 30 13:11 config_builder.sh
            -rwxr-x--- 1 weblogic weblogic  2262 Jul 30 13:11 config.sh
            -rwxr-x--- 1 weblogic weblogic  2567 Jul 30 13:11 pack.sh
            -rwxr-x--- 1 weblogic weblogic  2150 Jul 30 13:11 setPatchEnv.sh
            -rwxr-x--- 1 weblogic weblogic  4070 Jul 30 13:11 startDerby.sh
            -rwxr-x--- 1 weblogic weblogic  4076 Jul 30 13:11 startManagedWebLogic.sh
            -rwxr-x--- 1 weblogic weblogic  1436 Jul 30 13:11 stopDerby.sh
            -rwxr-x--- 1 weblogic weblogic  2075 Jul 30 13:11 unpack.sh
            -rwxr-x--- 1 weblogic weblogic  3286 Jul 30 13:11 upgrade.sh
            -rwxr-x--- 1 weblogic weblogic 31205 Jul 30 13:11 wlscontrol.sh
            -rwxr-x--- 1 weblogic weblogic 13740 Jul 30 13:11 wlsifconfig.sh
            -rwxr-x--- 1 weblogic weblogic   772 Jul 30 13:11 wlst.sh
    2.  ###### 执行 ./config.sh 文件，创建 domian ######
        
            -bash-4.2$ ./config.sh 
            Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128m; support was removed in 8.0
            Unable to instantiate GUI, defaulting to console mode.
            Java HotSpot(TM) 64-Bit Server VM warning: You have loaded library /u01/weblogic/wlserver_10.3/common/lib/libjni.so which might have disabled stack guard. The VM will try to fix the stack guard now.
            It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'.
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Welcome:
            --------
            
            Choose between creating and extending a domain. Based on your selection, 
            the Configuration Wizard guides you through the steps to generate a new or 
            extend an existing domain.
            
             ->1|Create a new WebLogic domain
                |    Create a WebLogic domain in your projects directory.  
            
               2|Extend an existing WebLogic domain
                |    Use this option to add new components to an existing domain and modify     |configuration settings. 
            
            
            
            
            
            Enter index number to select OR [Exit][Next]> 1
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Select Domain Source:
            ---------------------
            
            Select the source from which the domain will be created. You can create the 
            domain by selecting from the required components or by selecting from a 
            list of existing domain templates.
            
             ->1|Choose Weblogic Platform components
                |    You can choose the Weblogic component(s) that you want supported in 
                |your domain. 
            
               2|Choose custom template
                |    Choose this option if you want to use an existing  template. This 
                |could be a custom created template using the Template Builder. 
            
            
            
            
            
            Enter index number to select OR [Exit][Previous][Next]> 1
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Application Template Selection:
            -------------------------------
            
             
            
                Available Templates
                |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
                |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2] 
                |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3] 
                |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4] 
            
            
                ** Invalid input, not selectable
            
            
            Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Edit Domain Information:
            ------------------------
            
                |  Name  |    Value    |
               _|________|_____________|
               1| *Name: | base_domain |
            
            
            
            
            Enter value for "Name" OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Select the target domain directory for this domain:
            ---------------------------------------------------
            
                "Target Location" = [Enter new value or use default 
            "/u01/weblogic/user_projects/domains"]
            
            
            
            
            Enter new Target Location OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure Administrator User Name and Password:
            -----------------------------------------------
            
            Create a user to be assigned to the Administrator role. This user is the 
            default administrator used to start development mode servers.
            
                |          Name           |                  Value                  |
               _|_________________________|_________________________________________|
               1|         *Name:          |                weblogic                 |
               2|     *User password:     |                                         |
               3| *Confirm user password: |                                         |
               4|      Description:       | This user is the default administrator. |
            
            Use above value or select another option:
                1 - Modify "Name"
                2 - Modify "User password"
                3 - Modify "Confirm user password"
                4 - Modify "Description"
            
            
            
            
            Enter option number to select OR [Exit][Previous][Next]> 2
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure Administrator User Name and Password:
            -----------------------------------------------
            
            Create a user to be assigned to the Administrator role. This user is the 
            default administrator used to start development mode servers.
            
                "*User password:" = []
            
            
            
            
            Enter new *User password: OR [Exit][Reset][Accept]> 12345678
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure Administrator User Name and Password:
            -----------------------------------------------
            
            Create a user to be assigned to the Administrator role. This user is the 
            default administrator used to start development mode servers.
            
                |          Name           |                  Value                  |
               _|_________________________|_________________________________________|
               1|         *Name:          |                weblogic                 |
               2|     *User password:     |                ********                 |
               3| *Confirm user password: |                                         |
               4|      Description:       | This user is the default administrator. |
            
            Use above value or select another option:
                1 - Modify "Name"
                2 - Modify "User password"
                3 - Modify "Confirm user password"
                4 - Modify "Description"
                5 - Discard Changes
            
            
            
            
            Enter option number to select OR [Exit][Previous][Next]> 3
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure Administrator User Name and Password:
            -----------------------------------------------
            
            Create a user to be assigned to the Administrator role. This user is the 
            default administrator used to start development mode servers.
            
                "*Confirm user password:" = []
            
            
            
            
            Enter new *Confirm user password: OR [Exit][Reset][Accept]> 12345678
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure Administrator User Name and Password:
            -----------------------------------------------
            
            Create a user to be assigned to the Administrator role. This user is the 
            default administrator used to start development mode servers.
            
                |          Name           |                  Value                  |
               _|_________________________|_________________________________________|
               1|         *Name:          |                weblogic                 |
               2|     *User password:     |                ********                 |
               3| *Confirm user password: |                ********                 |
               4|      Description:       | This user is the default administrator. |
            
            Use above value or select another option:
                1 - Modify "Name"
                2 - Modify "User password"
                3 - Modify "Confirm user password"
                4 - Modify "Description"
                5 - Discard Changes
            
            
            
            
            Enter option number to select OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Domain Mode Configuration:
            --------------------------
            
            Enable Development or Production Mode for this domain. 
            
             ->1|Development Mode
            
               2|Production Mode
            
            
            
            
            Enter index number to select OR [Exit][Previous][Next]> 2
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Java SDK Selection:
            -------------------
            
             ->1|Sun SDK 1.8.0_181 @ /usr/java/jdk1.8.0_181-cloudera
               2|Other Java SDK
            
            
            
            
            Enter index number to select OR [Exit][Previous][Next]> 1
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Select Optional Configuration:
            ------------------------------
            
               1|Administration Server [ ]
               2|Managed Servers, Clusters and Machines [ ]
               3|RDBMS Security Store [ ]
            
            
            
            Enter index number to select OR [Exit][Previous][Next]> 1
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Select Optional Configuration:
            ------------------------------
            
               1|Administration Server [x]
               2|Managed Servers, Clusters and Machines [ ]
               3|RDBMS Security Store [ ]
            
            
            
            Enter index number to select OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Configure the Administration Server:
            ------------------------------------
            
            Each WebLogic Server domain must have one Administration Server. The 
            Administration Server is used to perform administrative tasks.
            
                |       Name       |        Value        |
               _|__________________|_____________________|
               1|      *Name:      |     AdminServer     |
               2| *Listen address: | All Local Addresses |
               3|   Listen port:   |        7001         |
               4| SSL listen port: |         N/A         |
               5|   SSL enabled:   |        false        |
            
            Use above value or select another option:
                1 - Modify "Name"
                2 - Modify "Listen address"
                3 - Modify "Listen port"
                4 - Modify "SSL enabled"
            
            
            
            
            Enter option number to select OR [Exit][Previous][Next]> 
            
            
            
            
            
            <------------------- Fusion Middleware Configuration Wizard ------------------>
            
            Creating Domain...
            
            0%          25%          50%          75%          100%
            [------------|------------|------------|------------]
            [***************************************************]
            
            
            **** Domain Created Successfully! ****
4.  ###### 启动 Weblogic Server ######
    
    进入 `/u01/weblogic/user_projects/domains/base_domain` 目录，执行 `startWebLogic.sh` 文件
    
        -bash-4.2$ cd /u01/weblogic/user_projects/domains/base_domain
        -bash-4.2$ ./startWebLogic.sh 
        .
        .
        JAVA Memory arguments: -Xms256m -Xmx512m  -XX:MaxPermSize=256m
        .
        WLS Start Mode=Production
        .
        CLASSPATH=/u01/weblogic/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/weblogic/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.8.0_181-cloudera/lib/tools.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic.jar:/u01/weblogic/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/weblogic/wlserver_10.3/server/lib/webservices.jar:/u01/weblogic/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/weblogic/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/weblogic/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/weblogic/wlserver_10.3/server/lib/xqrl.jar:/usr/java/jdk1.8.0_181-cloudera/lib/dt.jar:/usr/java/jdk1.8.0_181-cloudera/lib/tool.jar:
        .
        PATH=/u01/weblogic/wlserver_10.3/server/bin:/u01/weblogic/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.8.0_181-cloudera/jre/bin:/usr/java/jdk1.8.0_181-cloudera/bin:/usr/java/jdk1.8.0_181-cloudera/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin
        .
        ***************************************************
        *  To start WebLogic Server, use a username and   *
        *  password assigned to an admin-level user.  For *
        *  server administration, use the WebLogic Server *
        *  console at http://hostname:port/console        *
        ***************************************************
        starting weblogic with Java version:
        java version "1.8.0_181"
        Java(TM) SE Runtime Environment (build 1.8.0_181-b13)
        Java HotSpot(TM) 64-Bit Server VM (build 25.181-b13, mixed mode)
        Starting WLS with line:
        /usr/java/jdk1.8.0_181-cloudera/bin/java -server   -Xms256m -Xmx512m  -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/weblogic/wlserver_10.3/server/lib/weblogic.policy  -Dweblogic.ProductionModeEnabled=true   -da -Dplatform.home=/u01/weblogic/wlserver_10.3 -Dwls.home=/u01/weblogic/wlserver_10.3/server -Dweblogic.home=/u01/weblogic/wlserver_10.3/server   -Dweblogic.management.discover=true  -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/weblogic/patch_wls1036/profiles/default/sysext_manifest_classpath:/u01/weblogic/patch_ocp371/profiles/default/sysext_manifest_classpath  weblogic.Server
        Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=256m; support was removed in 8.0
        <Jul 30, 2020 2:00:27 PM CST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true> 
        <Jul 30, 2020 2:00:28 PM CST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true> 
        <Jul 30, 2020 2:00:28 PM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 25.181-b13 from Oracle Corporation> 
        <Jul 30, 2020 2:00:29 PM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 > 
        <Jul 30, 2020 2:00:31 PM CST> <Info> <Security> <BEA-090065> <Getting boot identity from user.> 
        Enter username to boot WebLogic server:weblogic
        Enter password to boot WebLogic server:
        <Jul 30, 2020 2:00:48 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
        <Jul 30, 2020 2:00:48 PM CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> 
        <Jul 30, 2020 2:00:48 PM CST> <Notice> <Log Management> <BEA-170019> <The server log file /u01/weblogic/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.> 
        <Jul 30, 2020 2:00:52 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> 
        <Jul 30, 2020 2:00:56 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> 
        <Jul 30, 2020 2:00:56 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.101.40.207:7001 for protocols iiop, t3, ldap, snmp, http.> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.> 
        <Jul 30, 2020 2:01:07 PM CST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode> 
        <Jul 30, 2020 2:01:08 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> 
        <Jul 30, 2020 2:01:08 PM CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
5.  ##### 配置免密启动 #####
    
    1.  先执行 `startWebLogic.sh` 文件，启动一次服务
    2.  在 `/u01/weblogic/user_projects/domains/base_domain/servers/AdminServer` 目录下创建 security 目录，并在 security 目录下创建 boot.properties 文件。
        
            -bash-4.2$ cd /u01/weblogic/user_projects/domains/base_domain/servers/AdminServer
            -bash-4.2$ mkdir security
            -bash-4.2$ vi boot.properties
            username = weblogic
            password = 12345678
    3.  重新启动
        
            -bash-4.2$ ./startWebLogic.sh 
            .
            .
            JAVA Memory arguments: -Xms256m -Xmx512m  -XX:MaxPermSize=256m
            .
            WLS Start Mode=Production
            .
            CLASSPATH=/u01/weblogic/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/weblogic/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.8.0_181-cloudera/lib/tools.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic.jar:/u01/weblogic/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/weblogic/wlserver_10.3/server/lib/webservices.jar:/u01/weblogic/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/weblogic/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/weblogic/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/weblogic/wlserver_10.3/server/lib/xqrl.jar:/usr/java/jdk1.8.0_181-cloudera/lib/dt.jar:/usr/java/jdk1.8.0_181-cloudera/lib/tool.jar:
            .
            PATH=/u01/weblogic/wlserver_10.3/server/bin:/u01/weblogic/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.8.0_181-cloudera/jre/bin:/usr/java/jdk1.8.0_181-cloudera/bin:/usr/java/jdk1.8.0_181-cloudera/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin
            .
            ***************************************************
            *  To start WebLogic Server, use a username and   *
            *  password assigned to an admin-level user.  For *
            *  server administration, use the WebLogic Server *
            *  console at http://hostname:port/console        *
            ***************************************************
            starting weblogic with Java version:
            java version "1.8.0_181"
            Java(TM) SE Runtime Environment (build 1.8.0_181-b13)
            Java HotSpot(TM) 64-Bit Server VM (build 25.181-b13, mixed mode)
            Starting WLS with line:
            /usr/java/jdk1.8.0_181-cloudera/bin/java -server   -Xms256m -Xmx512m  -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/weblogic/wlserver_10.3/server/lib/weblogic.policy  -Dweblogic.ProductionModeEnabled=true   -da -Dplatform.home=/u01/weblogic/wlserver_10.3 -Dwls.home=/u01/weblogic/wlserver_10.3/server -Dweblogic.home=/u01/weblogic/wlserver_10.3/server   -Dweblogic.management.discover=true  -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/weblogic/patch_wls1036/profiles/default/sysext_manifest_classpath:/u01/weblogic/patch_ocp371/profiles/default/sysext_manifest_classpath  weblogic.Server
            Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=256m; support was removed in 8.0
            <Jul 30, 2020 2:31:29 PM CST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true> 
            <Jul 30, 2020 2:31:29 PM CST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true> 
            <Jul 30, 2020 2:31:29 PM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 25.181-b13 from Oracle Corporation> 
            <Jul 30, 2020 2:31:30 PM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 > 
            <Jul 30, 2020 2:31:32 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
            <Jul 30, 2020 2:31:32 PM CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> 
            <Jul 30, 2020 2:31:32 PM CST> <Notice> <Log Management> <BEA-170019> <The server log file /u01/weblogic/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.> 
            <Jul 30, 2020 2:31:37 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> 
            <Jul 30, 2020 2:31:37 PM CST> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: /u01/weblogic/user_projects/domains/base_domain/servers/AdminServer/security/boot.properties> 
            <Jul 30, 2020 2:31:42 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> 
            <Jul 30, 2020 2:31:42 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
            <Jul 30, 2020 2:31:46 PM CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.101.40.207:7001 for protocols iiop, t3, ldap, snmp, http.> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> 
            <Jul 30, 2020 2:31:47 PM CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
6.  ##### 浏览器访问 #####
    
    访问地址: http://:7001/console  
    ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80MzIxNTI1MA_size_16_color_FFFFFF_t_70][]

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80MzIxNTI1MA_size_16_color_FFFFFF_t_70]: /images/20230208/9a6738d013404086a3d96ecc4b7c3469.png