Spring Cloud OAuth2(基于JWT)的微服务认证授权实战

刺骨的言语ヽ痛彻心扉 2023-02-28 12:59 993阅读 0赞

### 文章目录 ###

*  1.简介
 *   *  1.1解决方案
     *  1.2案例工程架构
 *  2.构建auth-server工程
 *   *  2.1添加maven依赖
     *  2.2创建数据表
     *  2.3 添加配置
     *  2.4 自定义UserDetailsService
     *  2.5 认证授权配置
     *  2.6 扩展token增强器TokenEnhancer
     *  2.7 认证授权服务器配置
     *  2.8 认证授权服务器测试
 *  3.构建auth-client工程
 *   *  3.1 添加maven依赖
     *  3.2 重写token解析器
     *  3.3 解决Feign接口调用Token传递问题
     *  3.4 资源服务器配置
 *  4.构建资源服务器应用user-server/order-server工程
 *   *  4.1 添加maven依赖
     *  4.2 创建Spring Boot启动类
     *  4.3 添加配置
     *  4.4 编写测试接口
     *  4.5按照如上部署在构建order-server
     *  4.6 启动项目进行测试
 *  5.工程地址：
 *  6.参考文档：

# 1.简介 #

在上一章中已经介绍了Spring Security Oauth2的基本理论知识及其使用场景，本章节中注解介绍在Spring Cloud 中如何通过Oauth2来实现微服统一认证授权。

## 1.1解决方案 ##

本文中主要用到以下解决方案：

*  基于无状态令牌(jwt)的认证方案,服务端无需保存用户登陆状态；
 *  基于spring security框架 + oauth2协议 搭建；

为什么使用jwt方式？  
避免每次请求都需要远程调用认证授权服务，认证授权服务只验证一次，返回JWT。返回的 JWT 包含了用户的所有信息，包括权限信息。

## 1.2案例工程架构 ##

三个工程：

*  eureka-server：注册服务中心，端口8888。（在此前文章中已经搭建过，本文中不演示搭建过程）
 *  auth-server：负责授权，授权需要用户提供客户端的 clientId 和 password，以及授权用户的username和password。这些信息准备无误之后，auth-service 返回JWT，该 JWT 包含了用户的基本信息和权限点信息，并通过 RSA 加密。
 *  auth-client:鉴权客户端,公共依赖。其他所有资源服务引入
 *  user-server：作为资源服务，它的资源以及被保护起来了，需要相应的权限才能访问。user-server 服务得到用户请求的 JWT 后，先通过公钥解密JWT，得到该JWT对应的用户的信息和用户的权限信息，再判断该用户是否有权限访问该资源
 *  order-server:同上

工程架构图：  
![format_png][]

工程依赖关系：  
![format_png 1][]

# 2.构建auth-server工程 #

## 2.1添加maven依赖 ##

新建一个auth-server模块，并添加以下依赖：

<?xml version="1.0" encoding="UTF-8"?>
    <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
        <parent>
            <artifactId>spring-cloud-oauth2</artifactId>
            <groupId>com.hxmec</groupId>
            <version>0.0.1-SNAPSHOT</version>
        </parent>
        <modelVersion>4.0.0</modelVersion>
    
        <artifactId>auth-server</artifactId>
    
        <dependencies>
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-starter-oauth2</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-web</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-jdbc</artifactId>
            </dependency>
            <dependency>
                <groupId>mysql</groupId>
                <artifactId>mysql-connector-java</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-starter-netflix-eureka-client</artifactId>
            </dependency>
            <dependency>
                <groupId>com.alibaba</groupId>
                <artifactId>druid-spring-boot-starter</artifactId>
            </dependency>
    
            <dependency>
                <groupId>com.baomidou</groupId>
                <artifactId>mybatis-plus-boot-starter</artifactId>
            </dependency>
    
            <dependency>
                <groupId>p6spy</groupId>
                <artifactId>p6spy</artifactId>
                <version>3.8.5</version>
            </dependency>
        </dependencies>
    
        <build>
            <plugins>
                <plugin>
                    <groupId>org.springframework.boot</groupId>
                    <artifactId>spring-boot-maven-plugin</artifactId>
                </plugin>
            </plugins>
        </build>
    
    
    </project>

## 2.2创建数据表 ##

工程所需要的的表主要有以下几个：  
![format_png 2][]

主要用于存放 oauth2 协议中的client信息,颁发的 access token,refresh token 等信息。  
oauth2 相关的表说明参考http://andaily.com/spring-oauth-server/db\_table\_description.html 。演示工程中Access Token以jwt形式存储，所以实际只用到oauth\_client\_details表，以及sys\_user用户信息表。如果改用用jdbc方式存储，则需要用到其他表。

建表语句如下：

-- 客户端应用注册详情
    create table oauth_client_details (
      client_id VARCHAR(256) PRIMARY KEY, -- 客户端应用的账号
      resource_ids VARCHAR(256),		-- 客户端应用可访问的资源服务器列表,(空代表所有资源服务器都可以访问)
      client_secret VARCHAR(256),	-- 客户端应用的密码
      scope VARCHAR(256),	-- 资源服务器拥有的所有权限列表 (get add delete update) 
      authorized_grant_types VARCHAR(256), -- 客户端支持的授权码模式列表
      web_server_redirect_uri VARCHAR(256), -- 授权码模式,申请授权码后重定向的uri.
      authorities VARCHAR(256),
      access_token_validity INTEGER,   -- 设置颁发token的有效期
      refresh_token_validity INTEGER,  -- 颁发refresh_token的有效期(不设置不会同时颁发refresh_token)
      additional_information VARCHAR(4096),
      autoapprove VARCHAR(256)     -- 设置为true,授权码模式下自动授权
    );
    
    create table oauth_client_token (
      token_id VARCHAR(256),
      token BLOB,
      authentication_id VARCHAR(256) PRIMARY KEY,
      user_name VARCHAR(256),
      client_id VARCHAR(256)
    );
    
    -- 存放颁发的token
    create table oauth_access_token (
      token_id VARCHAR(256),
      token BLOB,
      authentication_id VARCHAR(256) PRIMARY KEY,
      user_name VARCHAR(256),
      client_id VARCHAR(256),
      authentication BLOB,
      refresh_token VARCHAR(256)
    );
    
    create table oauth_refresh_token (
      token_id VARCHAR(256),
      token BLOB,
      authentication BLOB
    );
    
    -- 授权码模式下,存放颁发的授权码
    create table oauth_code (
      code VARCHAR(256), authentication BLOB
    );
    
    create table oauth_approvals (
    	userId VARCHAR(256),
    	clientId VARCHAR(256),
    	scope VARCHAR(256),
    	status VARCHAR(10),
    	expiresAt DATETIME,
    	lastModifiedAt DATETIME
    );
    
    CREATE TABLE `sys_user` (
      `id` bigint(32) NOT NULL,
      `username` varchar(100) DEFAULT NULL,
      `password` varchar(200) DEFAULT NULL,
      `enable_` tinyint(1) DEFAULT NULL,
      `email` varchar(50) DEFAULT NULL,
      `mobile` varchar(20) DEFAULT NULL,
      `del_flag` tinyint(1) DEFAULT NULL,
      `create_time` datetime DEFAULT NULL,
      `create_user` bigint(32) DEFAULT NULL,
      `modified_time` datetime DEFAULT NULL,
      `modified_user` bigint(32) DEFAULT NULL,
      PRIMARY KEY (`id`)
    );
    
    INSERT INTO `oauth_client_details`(`client_id`, `resource_ids`, `client_secret`, `scope`, `authorized_grant_types`, `web_server_redirect_uri`, `authorities`, `access_token_validity`, `refresh_token_validity`, `additional_information`, `autoapprove`) VALUES ('app', NULL, '$2a$10$JWSnLszKQANW7OF3p2b8IuIQXTVD8OUN//Q4l/sZGmzyaLEWnC5/u', 'server', 'password,authorization_code,refresh_token,client_credentials', NULL, NULL, 60000, 300, NULL, NULL);
    INSERT INTO `oauth_client_details`(`client_id`, `resource_ids`, `client_secret`, `scope`, `authorized_grant_types`, `web_server_redirect_uri`, `authorities`, `access_token_validity`, `refresh_token_validity`, `additional_information`, `autoapprove`) VALUES ('order', NULL, '$2a$10$JWSnLszKQANW7OF3p2b8IuIQXTVD8OUN//Q4l/sZGmzyaLEWnC5/u', 'server', 'password,authorization_code,refresh_token,client_credentials', NULL, NULL, 60000, 300, NULL, NULL);
    INSERT INTO `oauth_client_details`(`client_id`, `resource_ids`, `client_secret`, `scope`, `authorized_grant_types`, `web_server_redirect_uri`, `authorities`, `access_token_validity`, `refresh_token_validity`, `additional_information`, `autoapprove`) VALUES ('user', NULL, '$2a$10$JWSnLszKQANW7OF3p2b8IuIQXTVD8OUN//Q4l/sZGmzyaLEWnC5/u', 'server', 'password,authorization_code,refresh_token,client_credentials', NULL, NULL, 60000, 300, NULL, NULL);
    
    INSERT INTO `sys_user` VALUES (1282941563927805954, 'trazen', '$2a$10$JWSnLszKQANW7OF3p2b8IuIQXTVD8OUN//Q4l/sZGmzyaLEWnC5/u', NULL, 'trazen@126.com', '18559756159', 0, '2020-07-14 15:34:39', NULL, '2020-07-14 15:40:45', NULL);

## 2.3 添加配置 ##

bootstrap.yml配置如下

server:
      port: 8889
    spring:
      application:
        name: auth-server
    logging:
      pattern:
        console: '%d{yyyy-MM-dd HH:mm:ss.SSS} %-5level [%thread] %logger{15} - %msg%n'
      config: classpath:logback-spring.xml
    eureka:
      client:
        service-url:
          defaultZone: http://localhost:8888/eureka/

application.yml配置如下：

# mybatis- plus配置
    mybatis-plus:
      # xml扫描，多个目录用逗号或者分号隔开隔开
      mapper-locations: classpath:mapper/*.xml
      # 以下配置均有默认值,可以不设置
      global-config:
        db-config:
          #主键类型 AUTO:"数据库ID自增" INPUT:"用户输入ID",ID_WORKER:"全局唯一ID (数字类型唯一ID)", UUID:"全局唯一ID UUID";
          id-type: ASSIGN_ID
      configuration:
        # 是否开启自动驼峰命名规则映射:从数据库列名到Java属性驼峰命名的类似映射
        map-underscore-to-camel-case: true
        # 返回map时true:当查询数据为空时字段返回为null,false:不加这个查询数据为空时，字段将被隐藏
        call-setters-on-nulls: true
    
    spring:
      datasource:
        #driver-class-name: com.mysql.cj.jdbc.Driver
        driver-class-name: com.p6spy.engine.spy.P6SpyDriver
        type: com.alibaba.druid.pool.DruidDataSource
        druid:
          url: jdbc:p6spy:mysql://192.168.29.188:3306/sc_oauth2?useUnicode=true&characterEncoding=utf-8
          username: root
          password: root
          # 初始连接数
          initial-size: 10
          # 最大连接池数量
          max-active: 100
          # 最小连接池数量
          min-idle: 10
          # 配置获取连接等待超时的时间
          max-wait: 60000
          # 打开PSCache，并且指定每个连接上PSCache的大小
          pool-prepared-statements: true
          max-pool-prepared-statement-per-connection-size: 20
          # 配置间隔多久才进行一次检测，检测需要关闭的空闲连接，单位是毫秒
          timeBetweenEvictionRunsMillis: 60000
          # 配置一个连接在池中最小生存的时间，单位是毫秒
          min-evictable-idle-time-millis: 300000
          validation-query: SELECT 1 FROM DUAL
          test-while-idle: true
          test-on-borrow: false
          test-on-return: false
          stat-view-servlet:
            enabled: false

## 2.4 自定义UserDetailsService ##

*  客户端来请求颁发token实际上就是访问一个 spring security oauth2已经封装好的令牌端点（TokenEndPoint），该接口最终会调用UserDetailsService方法去根据请求的账号信息去获取用户信息，注意仅仅是获取用户信息，账号信息校验是交给spring security去做的，所以这里重写该接口从Mysql表中获取用户信息。
 *  UserDetailsService类就是用户来请求获取token时,根据该用户的username加载用户信息返回即可,而校验用户账号密码的操作之后会被AuthenticationManager调用一个认证器去校验用户账号密码完成。

接口MyUserDetailsService.java

/** * 功能描述: 继承UserDetailsService接口 * @author Trazen * @date 2020/7/14 15:43 */
    public interface MyUserDetailsService extends UserDetailsService { 
    }

实现类MyUserDetailsServiceImpl

/** * 功能描述: 自定义UserDetailsService * @author Trazen * @date 2020/7/14 15:43 */
    @Primary
    @Service
    @AllArgsConstructor
    public class MyUserDetailsServiceImpl implements MyUserDetailsService { 
    
        private final SysUserMapper sysUserMapper;
    
        @Override
        public AuthUserDetail loadUserByUsername(String username) throws UsernameNotFoundException { 
            QueryWrapper<SysUser> wrapper = new QueryWrapper<>();
            wrapper.lambda().eq(SysUser::getUsername,username);
            SysUser sysUser = sysUserMapper.selectOne(wrapper);
            if(sysUser == null){ 
                throw new UsernameNotFoundException("用户不存在");
            }else { 
                return UserDetailConverter.convert(sysUser);
            }
        }
    
        public static class UserDetailConverter{ 
            static AuthUserDetail convert(SysUser user){ 
                return new AuthUserDetail(user);
            }
        }
    }

## 2.5 认证授权配置 ##

认证中心的spring security配置如下：  
Oauth2WebSecurityConfig.java

/** * 功能描述: spring security 配置 * @author Trazen * @date 2020/7/14 16:00 */
    @Configuration
    @EnableWebSecurity
    @AllArgsConstructor
    public class Oauth2WebSecurityConfig extends WebSecurityConfigurerAdapter { 
    
        private final MyUserDetailsService myUserDetailsService;
    
        /** * 重新注入认证管理器 * @return * @throws Exception */
        @Override
        @Bean
        public AuthenticationManager authenticationManagerBean() throws Exception { 
            return super.authenticationManagerBean();
        }
    
    
        /** * 注入密码加密BCryptPasswordEncoder * @return */
        @Bean
        public PasswordEncoder passwordEncoder() { 
            return new BCryptPasswordEncoder();
        }
    
        @Override
        protected void configure(AuthenticationManagerBuilder auth) throws Exception { 
            // 使用自定义方式加载用户信息
            auth.userDetailsService(myUserDetailsService)
                    .passwordEncoder(passwordEncoder());
        }
    
        @Override
        protected void configure(HttpSecurity http) throws Exception { 
            http
                    .authorizeRequests()
                    .anyRequest().authenticated()
                    .and()
                    .formLogin().and()
                    .csrf().disable()
                    .httpBasic();
        }
    }

## 2.6 扩展token增强器TokenEnhancer ##

> 在之前Spring Security Oauth2的文中可以知道默认获取token的接口只会获取到accessToken,refreshToken等信息。在实际应用场景中，我们可能还需要增加一些和用户相关的信息（比如用户id,用户名,用户组织机构id等），这时候默认返回的信息就无法满足我们的需求，就可以通过实现TokenEnhancer 接并重写它的 enhance 方法实现。

MyTokenEnhancer.java

/** * 功能描述: 增强颁发的token的携带信息 * @author Trazen * @date 2020/7/14 16:07 */
    public class MyTokenEnhancer implements TokenEnhancer { 
    
    
        /** * 客户端模式 */
        private final static String CLIENT_CREDENTIALS = "client_credentials";
    
        @Override
        public OAuth2AccessToken enhance(OAuth2AccessToken accessToken, OAuth2Authentication authentication) { 
    
            //客户端模式不进行增强
            if (CLIENT_CREDENTIALS.equals(authentication.getOAuth2Request().getGrantType())) { 
                return accessToken;
            }
            //获取要增强携带的字段
            AuthUserDetail authUserDetail = (AuthUserDetail) authentication.getPrincipal();
    
    
            final Map<String, Object> additionalInfo = new HashMap<>(3);
    
            //添加token携带的字段
            additionalInfo.put("id", authUserDetail.getSysUser().getId());
            additionalInfo.put("username", authUserDetail.getSysUser().getUsername());
            additionalInfo.put("email", authUserDetail.getSysUser().getEmail());
            additionalInfo.put("mobile", authUserDetail.getSysUser().getMobile());
    
            DefaultOAuth2AccessToken token = (DefaultOAuth2AccessToken) accessToken;
            token.setAdditionalInformation(additionalInfo);
            ((DefaultOAuth2AccessToken) accessToken).setAdditionalInformation(additionalInfo);
            return accessToken;
    
        }
    }

## 2.7 认证授权服务器配置 ##

配置认证中心的oauth2组件,比如自定义的TokenEnhancer,自定义的UserDetailService,重新配置的AuthenticationManager,以及之前创建数据库表的数据源。

认证授权服务器代码如下  
Oauth2AuthServerConfig.java

/** * 功能描述: oauth2 认证服务器配置 * @author Trazen * @date 2020/7/14 16:11 */
    @Configuration
    @EnableAuthorizationServer
    @AllArgsConstructor
    public class Oauth2AuthServerConfig extends AuthorizationServerConfigurerAdapter { 
    
        private final AuthenticationManager authenticationManager;
    
        private final DataSource dataSource;
    
        private final MyUserDetailsService myUserDetailsService;
    
        @Override
        public void configure(ClientDetailsServiceConfigurer clients) throws Exception { 
            MyClientDetailsService clientDetailsService = new MyClientDetailsService(dataSource);
            clients.withClientDetails(clientDetailsService);
        }
    
        @Override
        public void configure(AuthorizationServerSecurityConfigurer security) throws Exception { 
        }
    
        @Override
        public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception { 
            // 将增强的token设置到增强链中
            TokenEnhancerChain enhancerChain = new TokenEnhancerChain();
            enhancerChain.setTokenEnhancers(Arrays.asList(customTokenEnhancer(), jwtAccessTokenConverter()));
    
            endpoints.tokenStore(tokenStore())
                    .authenticationManager(authenticationManager)
                    // //刷新token的请求会用用到
                    .userDetailsService(myUserDetailsService)
                    .tokenEnhancer(enhancerChain);
        }
    
    
        /** * 更改存储token的策略，默认是内存策略,修改为jwt * @return */
        @Bean
        public TokenStore tokenStore() { 
            //基于token认证
            return new JwtTokenStore(jwtAccessTokenConverter());
        }
    
        @Bean
        public JwtAccessTokenConverter jwtAccessTokenConverter(){ 
            JwtAccessTokenConverter jat = new JwtAccessTokenConverter();
            // jwt使用这个key来签名，验证token的服务也使用这个key来验签
            jat.setSigningKey("hxmec");
            return jat;
        }
    
    
        /** * 添加自定义token增强器实现颁发额外信息的token,因为默认颁发token的字段只有username和ROLE * @return */
        @Bean
        public TokenEnhancer customTokenEnhancer() { 
            //自定义实现
            return new MyTokenEnhancer();
        }
    }

## 2.8 认证授权服务器测试 ##

启动eureka-server,auth-server工程，进行获取access Token测试。  
测试数据使用之前脚本中创建的数据（密码加密使用BCryptPasswordEncoder方式）。  
oauth\_client\_details测试数据如下:  
client\_id:app  
client\_secret:123456

sys\_user测试数据如下：  
username:trazen  
password:123456

具体测试步骤如下：  
获取令牌端点地址为：http://\{ip\}:\{port\}/oauth/token  
![format_png 3][]  
![format_png 4][]

返回的access\_tokenken可以在jwt官网【 https://jwt.io/\#decoded-jwt 】进行解析地址。  
![format_png 5][]

# 3.构建auth-client工程 #

该工程主要封装资源服务器相关配置作为通用依赖。

## 3.1 添加maven依赖 ##

<?xml version="1.0" encoding="UTF-8"?>
    <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
        <parent>
            <artifactId>spring-cloud-oauth2</artifactId>
            <groupId>com.hxmec</groupId>
            <version>0.0.1-SNAPSHOT</version>
        </parent>
        <modelVersion>4.0.0</modelVersion>
    
        <artifactId>auth-client</artifactId>
    
        <dependencies>
            
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-starter-oauth2</artifactId>
            </dependency>
            
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-configuration-processor</artifactId>
                <optional>true</optional>
            </dependency>
            <dependency>
                <groupId>javax.servlet</groupId>
                <artifactId>javax.servlet-api</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-starter-openfeign</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.security</groupId>
                <artifactId>spring-security-web</artifactId>
                <version>5.3.3.RELEASE</version>
            </dependency>
        </dependencies>
    
        <build>
            <plugins>
                <plugin>
                    <groupId>org.springframework.boot</groupId>
                    <artifactId>spring-boot-maven-plugin</artifactId>
                </plugin>
            </plugins>
        </build>
    </project>

## 3.2 重写token解析器 ##

代码如下：  
MyUserAuthenticationConverter.java

/** * 功能描述: 重写token解析器,根据checkToken的结果转化用户信息 * @author Trazen * @date 2020/7/14 17:16 */
    public class MyUserAuthenticationConverter implements UserAuthenticationConverter { 
    
        private static final String N_A = "N/A";
    
    
        @Override
        public Map<String, ?> convertUserAuthentication(Authentication userAuthentication) { 
            return null;
        }
    
        @Override
        public Authentication extractAuthentication(Map<String, ?> map) { 
            if (!map.containsKey(USERNAME)){ 
                return null;
            }else{ 
                CurrentUser user = CurrentUser.builder()
                        .id((Long) map.get("id"))
                        .username((String) map.get(USERNAME))
                        .email((String) map.get("email"))
                        .mobile((String) map.get("mobile"))
                        .build();
                // 有权限信息就格式化权限信息
                if (map.containsKey("authorities") && map.get("authorities") != null){ 
                    Collection<? extends GrantedAuthority> authorities = getAuthorities(map);
                    user.setAuthorities(authorities);
                    return new UsernamePasswordAuthenticationToken(user, N_A,authorities);
                }else { 
    
                    return new UsernamePasswordAuthenticationToken(user, N_A,null);
                }
            }
    
        }
    
        private Collection<? extends GrantedAuthority> getAuthorities(Map<String, ?> map) { 
            Object authorities = map.get(AUTHORITIES);
            if (authorities instanceof String) { 
                return AuthorityUtils.commaSeparatedStringToAuthorityList((String) authorities);
            }
            if (authorities instanceof Collection) { 
                return AuthorityUtils.commaSeparatedStringToAuthorityList(StringUtils
                        .collectionToCommaDelimitedString((Collection<?>) authorities));
            }else if (authorities == null){ 
    
            }
            throw new IllegalArgumentException("Authorities must be either a String or a Collection");
        }
    
    }

## 3.3 解决Feign接口调用Token传递问题 ##

主要代码如下（其他代码参考工程源码）：  
MyFeignClientInterceptor.java

/** * 功能描述: 扩展OAuth2FeignRequestInterceptor * 如果特殊场景比如调度任务调用Feign接口等 * 可以通过过滤指定header头的方式，防止accessTokenContextRelay.copyToken()报错 * @author Trazen * @date 2020/7/17 21:17 */
    public class MyFeignClientInterceptor extends OAuth2FeignRequestInterceptor { 
    
        private final OAuth2ClientContext oAuth2ClientContext;
        private final AccessTokenContextRelay accessTokenContextRelay;
    
        /** * Default constructor which uses the provided OAuth2ClientContext and Bearer tokens * within Authorization header * * @param oAuth2ClientContext provided context * @param resource type of resource to be accessed * @param accessTokenContextRelay */
        public MyFeignClientInterceptor(OAuth2ClientContext oAuth2ClientContext
                , OAuth2ProtectedResourceDetails resource, AccessTokenContextRelay accessTokenContextRelay) { 
            super(oAuth2ClientContext, resource);
            this.oAuth2ClientContext = oAuth2ClientContext;
            this.accessTokenContextRelay = accessTokenContextRelay;
        }
    
    
        /** * Create a template with the header of provided name and extracted extract * 1. 如果使用 非web 请求，header 区别 * 2. 根据authentication 还原请求token * * @param template */
        @Override
        public void apply(RequestTemplate template) { 
            accessTokenContextRelay.copyToken();
            if (oAuth2ClientContext != null
                    && oAuth2ClientContext.getAccessToken() != null) { 
                super.apply(template);
            }
        }
    }

## 3.4 资源服务器配置 ##

代码如下：  
MyResourceServerConfig.java

/** * 功能描述: 资源服务器配置 * @author Trazen * @date 2020/7/14 21:37 */
    @Slf4j
    @Configuration
    @EnableResourceServer
    @AllArgsConstructor
    @ComponentScan("com.hxmec.auth")
    @EnableConfigurationProperties(AuthClientProperties.class)
    public class MyResourceServerConfig extends ResourceServerConfigurerAdapter { 
    
        private final MyAuthenticationEntryPoint baseAuthenticationEntryPoint;
    
        private final AuthClientProperties authClientProperties;
    
        private final RestTemplate lbRestTemplate;
    
        @Override
        public void configure(HttpSecurity http) throws Exception { 
            http.csrf().disable();
    
            // 放行 swagger ui (有整合swagger就放行这些请求吧)
            http.authorizeRequests().antMatchers(
                    "/v2/api-docs",
                    "/swagger-resources/configuration/ui",
                    "/swagger-resources",
                    "/swagger-resources/configuration/security",
                    "/swagger-ui.html",
                    "/webjars/**",
                    "/api/**/v2/api-docs")
                    .permitAll();
    
            // 根据自定义配置url放行
            if (authClientProperties.getIgnoreUrls() != null){ 
                for(String url: authClientProperties.getIgnoreUrls()){ 
                    http.authorizeRequests().antMatchers(url).permitAll();
                }
            }
            // 其他请求均需要token才能访问
            http.authorizeRequests().anyRequest().authenticated();
        }
    
        @Override
        public void configure(ResourceServerSecurityConfigurer resources) throws Exception { 
            if (authClientProperties.getResourceId() != null) { 
                resources.resourceId(authClientProperties.getResourceId());
            }
    
            // 这里的签名key 保持和认证中心一致
            if (authClientProperties.getSigningKey() == null) { 
                log.info("SigningKey is null cant not decode token.......");
            }
    
            DefaultAccessTokenConverter accessTokenConverter = new DefaultAccessTokenConverter();
            accessTokenConverter.setUserTokenConverter(new MyUserAuthenticationConverter());
    
            JwtAccessTokenConverter converter = new JwtAccessTokenConverter();
            //设置解析jwt的密钥
            converter.setSigningKey(authClientProperties.getSigningKey());
            converter.setVerifier(new MacSigner(authClientProperties.getSigningKey()));
    
            MyTokenServices tokenServices = new MyTokenServices();
    
            // 在CustomTokenServices注入三个依赖对象
            //设置token存储策略
            tokenServices.setTokenStore(new JwtTokenStore(converter));
            tokenServices.setJwtAccessTokenConverter(converter);
            tokenServices.setDefaultAccessTokenConverter(accessTokenConverter);
            tokenServices.setRestTemplate(lbRestTemplate);
            resources.tokenServices(tokenServices)
                    .authenticationEntryPoint(baseAuthenticationEntryPoint);
        }
    }

# 4.构建资源服务器应用user-server/order-server工程 #

资源服务器应用构建步骤一致，order-server主要演示通过feign接口调用传递token的功能。

## 4.1 添加maven依赖 ##

<?xml version="1.0" encoding="UTF-8"?>
    <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
        <parent>
            <artifactId>spring-cloud-oauth2</artifactId>
            <groupId>com.hxmec</groupId>
            <version>0.0.1-SNAPSHOT</version>
        </parent>
        <modelVersion>4.0.0</modelVersion>
    
        <artifactId>user-server</artifactId>
    
        <dependencies>
            <dependency>
                <groupId>com.hxmec</groupId>
                <artifactId>auth-client</artifactId>
                <version>0.0.1-SNAPSHOT</version>
            </dependency>
            
            <dependency>
                <groupId>org.springframework.retry</groupId>
                <artifactId>spring-retry</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-web</artifactId>
            </dependency>
            <dependency>
                <groupId>org.springframework.cloud</groupId>
                <artifactId>spring-cloud-starter-netflix-eureka-client</artifactId>
            </dependency>
        </dependencies>
    
        <build>
            <plugins>
                <plugin>
                    <groupId>org.springframework.boot</groupId>
                    <artifactId>spring-boot-maven-plugin</artifactId>
                </plugin>
            </plugins>
        </build>
    </project>

## 4.2 创建Spring Boot启动类 ##

UserServerApplication.java

/**
     * 功能描述: User Server启动类
     * @author  Trazen
     * @date  2020/7/15 9:55
     */
    @SpringBootApplication
    @EnableDiscoveryClient
    @EnableFeignClients
    @EnableGlobalMethodSecurity(prePostEnabled = true)
    public class UserServerApplication {
    
        public static void main(String[] args) {
            SpringApplication.run(UserServerApplication.class, args);
        }
    }

## 4.3 添加配置 ##

bootstrap.yml配置

server:
      port: 8890
    spring:
      application:
        name: user-server
      cloud:
        loadbalancer:
          retry:
            #开启重试机制
            enabled: true
    logging:
      pattern:
        console: '%d{yyyy-MM-dd HH:mm:ss.SSS} %-5level [%thread] %logger{15} - %msg%n'
      config: classpath:logback-spring.xml
    eureka:
      client:
        service-url:
          defaultZone: http://localhost:8888/eureka/

application.yml配置

hx:
      oauth2:
        client:
          # jwt的密钥
          signingKey: hxmec
          resourceId: ${ spring.application.name}
          # 放行的url
          ignoreUrls:
            - /oauth/**
            - /user/**
    
    
    
    #ribbon全局配置
    ribbon:
      #处理请求的超时时间，单位ms，默认1000
      ReadTimeout: 3000
      #连接建立的超时时间，单位ms，默认1000
      ConnectTimeout: 3000
    
    feign:
      compression:
        request:
          #是否启用请求GZIP压缩，true：启用，false：不启用
          enabled: true
          #压缩支持的MIME TYPE
          mime-types: text/xml,application/xml,application/json
          #压缩数据的最小值
          min-request-size: 2048
        response:
          #是否启用响应GZIP压缩，true：启用，false：不启用
          enabled: true
      client:
        config:
          #feign全局配置
          default:
            #指定日志级别，none：不记录任何日志，basic：仅记录请求方法、URL、响应状态代码以及执行时间（适合生产环境）
            #headers：在basic基础上，记录请求和响应的header，full：记录请求和响应的header、body和元数据，默认none
            loggerLevel: basic
          #feign指定客户端配置，即仅对指定调用的服务生效
          eureka-client:
            loggerLevel: full

## 4.4 编写测试接口 ##

UserController.java

/** * 功能描述: * @author Trazen * @date 2020/7/15 10:39 */
    @RestController
    @RequestMapping("/user")
    @Slf4j
    public class UserController { 
    
        @GetMapping("/a")
        @PreAuthorize("isAuthenticated()")
        public String get(@AuthenticationPrincipal CurrentUser currentUser){ 
            return "1";
        }
    
        @GetMapping("/b")
        public String get02(){ 
            log.info("---------------->{}",SecurityUtils.getCurrentUser());
            return SecurityUtils.getCurrentUser().getUsername();
        }
    
        @GetMapping("/c")
        public String get03(@AuthenticationPrincipal CurrentUser currentUser){ 
            Authentication authentication = SecurityContextHolder.getContext().getAuthentication();
            log.info("---------------->{}",currentUser);
            return "3";
        }
    
    }

## 4.5按照如上部署在构建order-server ##

Feign接口调用演示代码如下：

/** * 功能描述: * @author Trazen * @date 2020/7/15 17:41 */
    @FeignClient(value = "user-server")
    public interface UserFeignApi { 
    
        /** * user服务b接口 * @return */
        @GetMapping("/user/b")
        String get02();
    
    }

/** * 功能描述: * @author Trazen * @date 2020/7/15 16:16 */
    @RestController
    @RequestMapping("/order")
    @Slf4j
    @AllArgsConstructor
    public class OrderController { 
    
        private final UserFeignApi userFeignApi;
    
        @GetMapping("/a")
        public String get02(@AuthenticationPrincipal CurrentUser currentUser){ 
            log.info("---------------->{}", SecurityUtils.getCurrentUser());
            return "1";
        }
    
        @GetMapping("/b")
        public String getFeign(){ 
            return userFeignApi.get02();
        }
    }

## 4.6 启动项目进行测试 ##

启动如下项目：  
eureka-server----> auth-server ----> user-server/order-server

*  1.通过认证授权服务接口获取Token  
    ![format_png 6][]
 *  2.携带token访问user-server中接口  
    如果token有效并正常返回结果；  
    如果token无效则返回自定义的授权过期信息。  
    ![format_png 7][]  
    ![format_png 8][]
 *  3.访order-server接口，演示feign接口调用传递token  
    ![format_png 9][]

# 5.工程地址： #

https://github.com/ty1972873004/spring-cloud-oauth2

# 6.参考文档： #

*  http://ehedgehog.net/2019/03/23/%E5%BE%AE%E6%9C%8D%E5%8A%A1%E6%9E%B6%E6%9E%84%E4%B8%8B%E7%9A%84%E5%AE%89%E5%85%A8%E8%AE%BE%E8%AE%A1%E6%96%B9%E6%A1%88/\#5-2-2-%E6%8E%88%E6%9D%83%E7%A0%81%E6%A8%A1%E5%BC%8F
 *  https://projects.spring.io/spring-security-oauth/docs/oauth2.html
 *  http://andaily.com/spring-oauth-server/db\_table\_description.html

[format_png]: /images/20230209/638fa4a56df745afae6222c3c085b794.png
[format_png 1]: /images/20230209/cd4e87c479cb4bcf95d309d6c2a909cb.png
[format_png 2]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vYWU5ZmVkN2NkNzc0MDczY2ZlZTBkNjZkOGZjNzNkOTg?x-oss-process=image/format,png
[format_png 3]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vZjliZjNkZWMxMDI5MWU3M2U1ZWIyZDQ0NmNiOWJhMWU?x-oss-process=image/format,png
[format_png 4]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vNzcyZjQxZmU3OGE1OTAyZDA0OGI2NWFlMmQ0ZmYxNGQ?x-oss-process=image/format,png
[format_png 5]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vNTM2NmViMjkxY2UyNDNjYTg4YzllMjY0ZTI4YzJlNDQ?x-oss-process=image/format,png
[format_png 6]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vNTViOWYwOWJiNjA4M2IyYWIwZjRlZTQ4ODg5YzViNWY?x-oss-process=image/format,png
[format_png 7]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vOWI3NmNjZjEzYzc2Mjc5NDBmZGVhYmJmYzYyMzRmYjE?x-oss-process=image/format,png
[format_png 8]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vZDNjNDc1MzhhMDA0MThmNzAyYTM4OGJmMmZkZWZlNTE?x-oss-process=image/format,png
[format_png 9]: https://imgconvert.csdnimg.cn/aHR0cHM6Ly93d3cuc2hvd2RvYy5jYy9zZXJ2ZXIvYXBpL2F0dGFjaG1lbnQvdmlzaXRmaWxlL3NpZ24vNWVkM2JlMzkzZjkwMDg0YzhiMjQ4ZTQ4OWIyZjNjZmQ?x-oss-process=image/format,png