睿智的目标检测40——Keras搭建Retinaface人脸检测与关键点定位平台

忘是亡心i 2023-02-19 11:23 171阅读 0赞

### 睿智的目标检测40——Keras搭建Retinaface人脸检测与关键点定位平台 ###

*  学习前言
 *  什么是Retinaface人脸检测算法
 *  源码下载
 *  Retinaface实现思路
 *   *  一、预测部分
     *   *  1、主干网络介绍
         *  2、FPN特征金字塔
         *  3、SSH进一步加强特征提取
         *  4、从特征获取预测结果
         *  5、预测结果的解码
         *  6、在原图上进行绘制
     *  二、训练部分
     *   *  1、真实框的处理
         *  2、利用处理完的真实框与对应图片的预测结果计算loss
 *  训练自己的Retinaface模型

# 学习前言 #

一起来看看Retinaface的keras实现吧。  
![在这里插入图片描述][20190723165901974.jpg_pic_center]

# 什么是Retinaface人脸检测算法 #

Retinaface是来自insightFace的又一力作，基于one-stage的人脸检测网络。  
同时开源了代码与数据集，在widerface上有非常好的表现。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center]

# 源码下载 #

[https://github.com/bubbliiiing/retinaface-keras][https_github.com_bubbliiiing_retinaface-keras]  
喜欢的可以点个star噢。

# Retinaface实现思路 #

## 一、预测部分 ##

### 1、主干网络介绍 ###

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center]  
Retinaface在实际训练的时候使用两种网络作为主干特征提取网络。分别是MobilenetV1-0.25和Resnet。

**使用Resnet可以实现更高的精度，使用MobilenetV1-0.25可以在CPU上实现实时检测。**

本文以MobilenetV1-0.25进行展示。

MobileNet模型是Google针对手机等嵌入式设备提出的一种轻量级的深层神经网络，其使用的核心思想便是depthwise separable convolution。

对于一个卷积点而言：  
**假设有一个3×3大小的卷积层，其输入通道为16、输出通道为32。具体为，32个3×3大小的卷积核会遍历16个通道中的每个数据，最后可得到所需的32个输出通道，所需参数为16×32×3×3=4608个。**

**应用深度可分离卷积，用16个3×3大小的卷积核分别遍历16通道的数据，得到了16个特征图谱。在融合操作之前，接着用32个1×1大小的卷积核遍历这16个特征图谱，所需参数为16×3×3+16×32×1×1=656个。**  
可以看出来depthwise separable convolution可以减少模型的参数。

如下这张图就是depthwise separable convolution的结构  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 1]  
**在建立模型的时候，可以使用Keras中的DepthwiseConv2D层实现深度可分离卷积，然后再利用1x1卷积调整channels数。**

通俗地理解就是3x3的卷积核厚度只有一层，然后在输入张量上一层一层地滑动，每一次卷积完生成一个输出通道，当卷积完成后，在利用1x1的卷积调整厚度。

**如下就是MobileNet的结构，其中Conv dw就是分层卷积，在其之后都会接一个1x1的卷积进行通道处理，**  
![在这里插入图片描述][20191030153845940.png_pic_center]  
上图所示是的mobilenetV1-1的结构，本文所用的mobilenetV1-0.25是mobilenetV1-1通道数压缩为原来1/4的网络。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 2]

import warnings
    import numpy as np
    from keras.models import Model
    from keras.layers import DepthwiseConv2D,Input,Activation,Dropout,Reshape,BatchNormalization,GlobalAveragePooling2D,GlobalMaxPooling2D,Conv2D
    from keras import backend as K
    
    def _conv_block(inputs, filters, kernel=(3, 3), strides=(1, 1)):
        x = Conv2D(filters, kernel,
                   padding='same',
                   use_bias=False,
                   strides=strides,
                   name='conv1')(inputs)
        x = BatchNormalization(name='conv1_bn')(x)
        return Activation(relu6, name='conv1_relu')(x)
    
    
    def _depthwise_conv_block(inputs, pointwise_conv_filters,
                              depth_multiplier=1, strides=(1, 1), block_id=1):
    
        x = DepthwiseConv2D((3, 3),
                            padding='same',
                            depth_multiplier=depth_multiplier,
                            strides=strides,
                            use_bias=False,
                            name='conv_dw_%d' % block_id)(inputs)
    
        x = BatchNormalization(name='conv_dw_%d_bn' % block_id)(x)
        x = Activation(relu6, name='conv_dw_%d_relu' % block_id)(x)
    
        x = Conv2D(pointwise_conv_filters, (1, 1),
                   padding='same',
                   use_bias=False,
                   strides=(1, 1),
                   name='conv_pw_%d' % block_id)(x)
        x = BatchNormalization(name='conv_pw_%d_bn' % block_id)(x)
        return Activation(relu6, name='conv_pw_%d_relu' % block_id)(x)
    
    def relu6(x):
        return K.relu(x, max_value=6)
    
    def MobileNet(img_input, depth_multiplier=1):
    
        x = _conv_block(img_input, 8, strides=(2, 2))
        x = _depthwise_conv_block(x, 16, depth_multiplier, block_id=1)
    
        x = _depthwise_conv_block(x, 32, depth_multiplier, strides=(2, 2), block_id=2)
        x = _depthwise_conv_block(x, 32, depth_multiplier, block_id=3)
    
        x = _depthwise_conv_block(x, 64, depth_multiplier, strides=(2, 2), block_id=4)
        x = _depthwise_conv_block(x, 64, depth_multiplier, block_id=5)
        feat1 = x
    
        x = _depthwise_conv_block(x, 128, depth_multiplier, strides=(2, 2), block_id=6)
        x = _depthwise_conv_block(x, 128, depth_multiplier, block_id=7)
        x = _depthwise_conv_block(x, 128, depth_multiplier, block_id=8)
        x = _depthwise_conv_block(x, 128, depth_multiplier, block_id=9)
        x = _depthwise_conv_block(x, 128, depth_multiplier, block_id=10)
        x = _depthwise_conv_block(x, 128, depth_multiplier, block_id=11)
        feat2 = x
    
        x = _depthwise_conv_block(x, 256, depth_multiplier, strides=(2, 2), block_id=12)
        x = _depthwise_conv_block(x, 256, depth_multiplier, block_id=13)
        feat3 = x
    
        return feat1, feat2, feat3

### 2、FPN特征金字塔 ###

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 3]  
与Retinanet类似的是，Retinaface使用了FPN的结构，对Mobilenet最后三个shape的有效特征层进行FPN结构的构建。

构建方式很简单，首先利用1x1卷积对三个有效特征层进行通道数的调整。调整后利用Upsample和Add进行上采样的特征融合。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70]  
实现代码为：

def RetinaFace(cfg, backbone="mobilenet"):
        inputs = Input(shape=(None, None, 3))
    
        if backbone == "mobilenet":
            C3, C4, C5 = MobileNet(inputs)
        elif backbone == "resnet50":
            C3, C4, C5 = ResNet50(inputs)
        else:
            raise ValueError('Unsupported backbone - `{}`, Use mobilenet, resnet50.'.format(backbone))
    
        leaky = 0
        if (cfg['out_channel'] <= 64):
            leaky = 0.1
        P3 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C3_reduced', leaky=leaky)(C3)
        P4 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C4_reduced', leaky=leaky)(C4)
        P5 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C5_reduced', leaky=leaky)(C5)
    
        P5_upsampled = UpsampleLike(name='P5_upsampled')([P5, P4])
        P4 = Add(name='P4_merged')([P5_upsampled, P4])
        P4 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=3, strides=1, padding='same', name='Conv_P4_merged', leaky=leaky)(P4)
    
        P4_upsampled = UpsampleLike(name='P4_upsampled')([P4, P3])
        P3 = Add(name='P3_merged')([P4_upsampled, P3])
        P3 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=3, strides=1, padding='same', name='Conv_P3_merged', leaky=leaky)(P3)

### 3、SSH进一步加强特征提取 ###

通过第二部分的运算，我们获得了P3、P4、P5三个有效特征层。

Retinaface为了进一步加强特征提取，使用了SSH模块加强感受野。

SSH的结构如如下所示：  
![在这里插入图片描述][20200620134532236.png_pic_center]  
SSH的思想非常简单，使用了三个并行结构，利用3x3卷积的堆叠代替5x5与7x7卷积的效果：左边的是3x3卷积，中间利用两次3x3卷积代替5x5卷积，右边利用三次3x3卷积代替7x7卷积。

这个思想在Inception里面有使用。

SSH实现代码为：

def SSH(inputs, out_channel, leaky=0.1):
        conv3X3 = Conv2D_BN(out_channel//2, kernel_size=3, strides=1, padding='same')(inputs)
    
        conv5X5_1 = Conv2D_BN_Leaky(out_channel//4, kernel_size=3, strides=1, padding='same', leaky=leaky)(inputs)
        conv5X5 = Conv2D_BN(out_channel//4, kernel_size=3, strides=1, padding='same')(conv5X5_1)
    
        conv7X7_2 = Conv2D_BN_Leaky(out_channel//4, kernel_size=3, strides=1, padding='same', leaky=leaky)(conv5X5_1)
        conv7X7 = Conv2D_BN(out_channel//4, kernel_size=3, strides=1, padding='same')(conv7X7_2)
    
        out = Concatenate(axis=-1)([conv3X3, conv5X5, conv7X7])
        out = Activation("relu")(out)
        return out

Retinaface会将我们获得的P3、P4、P5三个有效特征层。都施加上SSH结构。

实现代码为：

### 4、从特征获取预测结果 ###

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center]  
通过第三步，我们已经可以获得SSH1，SSH2，SHH3三个有效特征层了。在获得这三个有效特征层后，我们需要通过这三个有效特征层获得预测结果。

Retinaface的预测结果分为三个，分别是**分类预测结果，框的回归预测结果和人脸关键点的回归预测结果**。

1、**分类预测结果**用于**判断先验框内部是否包含物体**，原版的**Retinaface**使用的**是softmax进行判断**。此时我们可以利用一个1x1的卷积，将SSH的通道数调整成num\_anchors x 2，用于代表每个先验框内部包含人脸的概率。

2、**框的回归预测结果**用于**对先验框进行调整获得预测框**，我们需要用四个参数对先验框进行调整。此时我们可以利用一个1x1的卷积，将SSH的通道数调整成num\_anchors x 4，用于代表每个先验框的调整参数。

3、**人脸关键点的回归预测结果**用于**对先验框进行调整获得人脸关键点**，每一个人脸关键点需要**两个调整参数**，一共有**五个人脸关键点**。此时我们可以利用一个1x1的卷积，将SSH的通道数调整成num\_anchors x 10（num\_anchors x 5 x 2），用于代表每个先验框的每个人脸关键点的调整。

实现代码为：

def ClassHead(inputs, num_anchors=2):
        outputs = Conv2D(num_anchors*2, kernel_size=1, strides=1)(inputs)
        return Activation("softmax")(Reshape([-1,2])(outputs))
    
    def BboxHead(inputs, num_anchors=2):
        outputs = Conv2D(num_anchors*4, kernel_size=1, strides=1)(inputs)
        return Reshape([-1,4])(outputs)
    
    def LandmarkHead(inputs, num_anchors=2):
        outputs = Conv2D(num_anchors*10, kernel_size=1, strides=1)(inputs)
        return Reshape([-1,10])(outputs)
    
    def RetinaFace(cfg, backbone="mobilenet"):
        inputs = Input(shape=(None, None, 3))
    
        if backbone == "mobilenet":
            C3, C4, C5 = MobileNet(inputs)
        elif backbone == "resnet50":
            C3, C4, C5 = ResNet50(inputs)
        else:
            raise ValueError('Unsupported backbone - `{}`, Use mobilenet, resnet50.'.format(backbone))
    
        leaky = 0
        if (cfg['out_channel'] <= 64):
            leaky = 0.1
        P3 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C3_reduced', leaky=leaky)(C3)
        P4 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C4_reduced', leaky=leaky)(C4)
        P5 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=1, strides=1, padding='same', name='C5_reduced', leaky=leaky)(C5)
    
        P5_upsampled = UpsampleLike(name='P5_upsampled')([P5, P4])
        P4 = Add(name='P4_merged')([P5_upsampled, P4])
        P4 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=3, strides=1, padding='same', name='Conv_P4_merged', leaky=leaky)(P4)
    
        P4_upsampled = UpsampleLike(name='P4_upsampled')([P4, P3])
        P3 = Add(name='P3_merged')([P4_upsampled, P3])
        P3 = Conv2D_BN_Leaky(cfg['out_channel'], kernel_size=3, strides=1, padding='same', name='Conv_P3_merged', leaky=leaky)(P3)
        
        SSH1 = SSH(P3, cfg['out_channel'], leaky=leaky)
        SSH2 = SSH(P4, cfg['out_channel'], leaky=leaky)
        SSH3 = SSH(P5, cfg['out_channel'], leaky=leaky)
    
        SSH_all = [SSH1,SSH2,SSH3]
    
        bbox_regressions = Concatenate(axis=1,name="bbox_reg")([BboxHead(feature) for feature in SSH_all])
        classifications = Concatenate(axis=1,name="cls")([ClassHead(feature) for feature in SSH_all])
        ldm_regressions = Concatenate(axis=1,name="ldm_reg")([LandmarkHead(feature) for feature in SSH_all])
    
        output = [bbox_regressions, classifications, ldm_regressions]
    
        model = Model(inputs=inputs, outputs=output)
        return model

### 5、预测结果的解码 ###

这三个有效特征层相当于将整幅图像划分成不同大小的网格，当我们输入进来的图像是(640, 640, 3)的时候。

SSH1的shape为(80, 80, 64)；  
SSH2的shape为(40, 40, 64)；  
SSH3的shape为(20, 20, 64)

SSH1就表示将原图像划分成80x80的网格；SSH2就表示将原图像划分成40x40的网格；SSH3就表示将原图像划分成20x20的网格，每个网格上有两个先验框，每个先验框代表图片上的一定区域。

Retinaface的预测结果用来判断先验框内部是否包含人脸，并且对包含人脸的先验框进行调整获得预测框与人脸关键点。

1、**分类预测结果**用于**判断先验框内部是否包含物体**，我们可以利用一个1x1的卷积，将SSH的通道数调整成num\_anchors x 2，用于代表每个先验框内部包含人脸的概率。

2、**框的回归预测结果**用于**对先验框进行调整获得预测框**，我们需要用四个参数对先验框进行调整。此时我们可以利用一个1x1的卷积，将SSH的通道数调整成num\_anchors x 4，用于代表每个先验框的调整参数。**每个先验框的四个调整参数中，前两个用于对先验框的中心进行调整，后两个用于对先验框的宽高进行调整。**

完成调整、判断之后，还需要进行非极大移植。  
下图是经过非极大抑制的。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 5]  
下图是未经过非极大抑制的。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 6]  
可以很明显的看出来，未经过非极大抑制的图片有许多重复的框，这些框都指向了同一个物体！

可以用一句话概括非极大抑制的功能就是：

**筛选出一定区域内属于同一种类得分最大的框。**

全部实现代码如下：

class BBoxUtility(object):
        def __init__(self, priors=None, overlap_threshold=0.35,
                     nms_thresh=0.45):
            self.priors = priors
            self.num_priors = 0 if priors is None else len(priors)
            self.overlap_threshold = overlap_threshold
            self._nms_thresh = nms_thresh
        def decode_boxes(self, mbox_loc, mbox_ldm, mbox_priorbox):
            # 获得先验框的宽与高
            prior_width = mbox_priorbox[:, 2] - mbox_priorbox[:, 0]
            prior_height = mbox_priorbox[:, 3] - mbox_priorbox[:, 1]
            # 获得先验框的中心点
            prior_center_x = 0.5 * (mbox_priorbox[:, 2] + mbox_priorbox[:, 0])
            prior_center_y = 0.5 * (mbox_priorbox[:, 3] + mbox_priorbox[:, 1])
    
            # 真实框距离先验框中心的xy轴偏移情况
            decode_bbox_center_x = mbox_loc[:, 0] * prior_width * 0.1
            decode_bbox_center_x += prior_center_x
            decode_bbox_center_y = mbox_loc[:, 1] * prior_height * 0.1
            decode_bbox_center_y += prior_center_y
            
            # 真实框的宽与高的求取
            decode_bbox_width = np.exp(mbox_loc[:, 2] * 0.2)
            decode_bbox_width *= prior_width
            decode_bbox_height = np.exp(mbox_loc[:, 3] * 0.2)
            decode_bbox_height *= prior_height
    
            # 获取真实框的左上角与右下角
            decode_bbox_xmin = decode_bbox_center_x - 0.5 * decode_bbox_width
            decode_bbox_ymin = decode_bbox_center_y - 0.5 * decode_bbox_height
            decode_bbox_xmax = decode_bbox_center_x + 0.5 * decode_bbox_width
            decode_bbox_ymax = decode_bbox_center_y + 0.5 * decode_bbox_height
    
            prior_width = np.expand_dims(prior_width,-1)
            prior_height = np.expand_dims(prior_height,-1)
            prior_center_x = np.expand_dims(prior_center_x,-1)
            prior_center_y = np.expand_dims(prior_center_y,-1)
    
            mbox_ldm = mbox_ldm.reshape([-1,5,2])
            decode_ldm = np.zeros_like(mbox_ldm)
            decode_ldm[:,:,0] = np.repeat(prior_width,5,axis=-1)*mbox_ldm[:,:,0]*0.1 + np.repeat(prior_center_x,5,axis=-1)
            decode_ldm[:,:,1] = np.repeat(prior_height,5,axis=-1)*mbox_ldm[:,:,1]*0.1 + np.repeat(prior_center_y,5,axis=-1)
    
    
            # 真实框的左上角与右下角进行堆叠
            decode_bbox = np.concatenate((decode_bbox_xmin[:, None],
                                            decode_bbox_ymin[:, None],
                                            decode_bbox_xmax[:, None],
                                            decode_bbox_ymax[:, None],
                                            np.reshape(decode_ldm,[-1,10])), axis=-1)
            # 防止超出0与1
            decode_bbox = np.minimum(np.maximum(decode_bbox, 0.0), 1.0)
            return decode_bbox
        def detection_out(self, predictions, mbox_priorbox, confidence_threshold=0.4):
            
            # 网络预测的结果
            mbox_loc = predictions[0][0]
            # 置信度
            mbox_conf = predictions[1][0][:,1:2]
            # ldm的调整情况
            mbox_ldm = predictions[2][0]
            
            decode_bbox = self.decode_boxes(mbox_loc, mbox_ldm, mbox_priorbox)
    
            conf_mask = (mbox_conf >= confidence_threshold)[:,0]
    
            detection = np.concatenate((decode_bbox[conf_mask][:,:4], mbox_conf[conf_mask], decode_bbox[conf_mask][:,4:]), -1)
    
            best_box = []
            scores = detection[:,4]
            # 根据得分对该种类进行从大到小排序。
            arg_sort = np.argsort(scores)[::-1]
            detection = detection[arg_sort]
            while np.shape(detection)[0]>0:
                # 每次取出得分最大的框，计算其与其它所有预测框的重合程度，重合程度过大的则剔除。
                best_box.append(detection[0])
                if len(detection) == 1:
                    break
                ious = iou(best_box[-1],detection[1:])
                detection = detection[1:][ious<self._nms_thresh]
    
            return best_box
    
    def iou(b1,b2):
        b1_x1, b1_y1, b1_x2, b1_y2 = b1[0], b1[1], b1[2], b1[3]
        b2_x1, b2_y1, b2_x2, b2_y2 = b2[:, 0], b2[:, 1], b2[:, 2], b2[:, 3]
    
        inter_rect_x1 = np.maximum(b1_x1, b2_x1)
        inter_rect_y1 = np.maximum(b1_y1, b2_y1)
        inter_rect_x2 = np.minimum(b1_x2, b2_x2)
        inter_rect_y2 = np.minimum(b1_y2, b2_y2)
        
        inter_area = np.maximum(inter_rect_x2 - inter_rect_x1, 0) * \
                     np.maximum(inter_rect_y2 - inter_rect_y1, 0)
        
        area_b1 = (b1_x2-b1_x1)*(b1_y2-b1_y1)
        area_b2 = (b2_x2-b2_x1)*(b2_y2-b2_y1)
        
        iou = inter_area/np.maximum((area_b1+area_b2-inter_area),1e-6)
        return iou

### 6、在原图上进行绘制 ###

通过第5步，我们可以获得预测框在原图上的位置，而且这些预测框都是经过筛选的。这些筛选后的框可以直接绘制在图片上，就可以获得结果了。

## 二、训练部分 ##

### 1、真实框的处理 ###

真实框的处理过程可以分为3步：  
1、计算所有真实框和所有先验框的重合程度，**和真实框iou大于0.35的先验框被认为可以用于预测获得该真实框**。  
2、对这些和**真实框重合程度比较大的先验框**进行**编码的操作**，所谓编码，就是**当我们要获得这样的真实框的时候**，网络的**预测结果应该是怎么样的**。  
3、编码操作可以分为三个部分，分别是**分类预测结果，框的回归预测结果和人脸关键点的回归预测结果**的编码。

class BBoxUtility(object):
        def __init__(self, priors=None, overlap_threshold=0.35,
                     nms_thresh=0.45):
            self.priors = priors
            self.num_priors = 0 if priors is None else len(priors)
            self.overlap_threshold = overlap_threshold
            self._nms_thresh = nms_thresh
    
        def iou(self, box):
            # 计算出每个真实框与所有的先验框的iou
            # 判断真实框与先验框的重合情况
            inter_upleft = np.maximum(self.priors[:, :2], box[:2])
            inter_botright = np.minimum(self.priors[:, 2:4], box[2:])
    
            inter_wh = inter_botright - inter_upleft
            inter_wh = np.maximum(inter_wh, 0)
            inter = inter_wh[:, 0] * inter_wh[:, 1]
            # 真实框的面积
            area_true = (box[2] - box[0]) * (box[3] - box[1])
            # 先验框的面积
            area_gt = (self.priors[:, 2] - self.priors[:, 0])*(self.priors[:, 3] - self.priors[:, 1])
            # 计算iou
            union = area_true + area_gt - inter
    
            iou = inter / union
            return iou
    
        def encode_box(self, box, return_iou=True):
            iou = self.iou(box[:4])
    
            encoded_box = np.zeros((self.num_priors, 4 + return_iou + 10))
    
            # 找到每一个真实框，重合程度较高的先验框
            assign_mask = iou > self.overlap_threshold
            if not assign_mask.any():
                assign_mask[iou.argmax()] = True
            if return_iou:
                encoded_box[:, 4][assign_mask] = iou[assign_mask]
            
            # 找到对应的先验框
            assigned_priors = self.priors[assign_mask]
            # 逆向编码，将真实框转化为efficientdet预测结果的格式
    
            # 先计算真实框的中心与长宽
            box_center = 0.5 * (box[:2] + box[2:4])
            box_wh = box[2:4] - box[:2]
            # 再计算重合度较高的先验框的中心与长宽
            assigned_priors_center = 0.5 * (assigned_priors[:, :2] +
                                            assigned_priors[:, 2:4])
            assigned_priors_wh = (assigned_priors[:, 2:4] -
                                  assigned_priors[:, :2])
    
            # 逆向求取efficientdet应该有的预测结果
            encoded_box[:, :2][assign_mask] = box_center - assigned_priors_center
            encoded_box[:, :2][assign_mask] /= assigned_priors_wh
            encoded_box[:, :2][assign_mask] /= 0.1
    
            encoded_box[:, 2:4][assign_mask] = np.log(box_wh / assigned_priors_wh)
            encoded_box[:, 2:4][assign_mask] /= 0.2
    
            ldm_encoded = np.zeros_like(encoded_box[:, 5:][assign_mask])
            ldm_encoded = np.reshape(ldm_encoded,[-1,5,2])
    
            ldm_encoded[:, :, 0] = box[[4,6,8,10,12]] - np.repeat(assigned_priors_center[:,0:1],5,axis=-1)
            ldm_encoded[:, :, 1] = box[[5,7,9,11,13]] - np.repeat(assigned_priors_center[:,1:2],5,axis=-1)
    
            ldm_encoded[:, :, 0] /= np.repeat(assigned_priors_wh[:,0:1],5,axis=-1)
            ldm_encoded[:, :, 1] /= np.repeat(assigned_priors_wh[:,1:2],5,axis=-1)
    
            ldm_encoded[:, :, 0] /= 0.1
            ldm_encoded[:, :, 1] /= 0.1
    
            encoded_box[:, 5:][assign_mask] = np.reshape(ldm_encoded,[-1,10])
            # print(encoded_box[assign_mask])
            return encoded_box.ravel()
    
        def assign_boxes(self, boxes):
            assignment = np.zeros((self.num_priors, 4 + 1 + 2 + 1 + 10 + 1))
            assignment[:,5] = 1
            if len(boxes) == 0:
                return assignment
                
            # (n, num_priors, 5)
            encoded_boxes = np.apply_along_axis(self.encode_box, 1, boxes)
            # 每一个真实框的编码后的值，和iou
            # (n, num_priors)
            encoded_boxes = encoded_boxes.reshape(-1, self.num_priors, 15)
    
            # 取重合程度最大的先验框，并且获取这个先验框的index
            # (num_priors)
            best_iou = encoded_boxes[:, :, 4].max(axis=0)
            # (num_priors)
            best_iou_idx = encoded_boxes[:, :, 4].argmax(axis=0)
            # (num_priors)
            best_iou_mask = best_iou > 0
            # 某个先验框它属于哪个真实框
            best_iou_idx = best_iou_idx[best_iou_mask]
    
            assign_num = len(best_iou_idx)
            # 保留重合程度最大的先验框的应该有的预测结果
            # 哪些先验框存在真实框
            encoded_boxes = encoded_boxes[:, best_iou_mask, :]
    
            assignment[:, :4][best_iou_mask] = encoded_boxes[best_iou_idx,np.arange(assign_num),:4]
            assignment[:, 4][best_iou_mask] = 1
    
            assignment[:, 5][best_iou_mask] = 0
            assignment[:, 6][best_iou_mask] = 1
            assignment[:, 7][best_iou_mask] = 1
    
            assignment[:, 8:-1][best_iou_mask] = encoded_boxes[best_iou_idx,np.arange(assign_num),5:]
            assignment[:, -1][best_iou_mask] = boxes[best_iou_idx, -1]
            # 通过assign_boxes我们就获得了，输入进来的这张图片，应该有的预测结果是什么样子的
    
            return assignment

### 2、利用处理完的真实框与对应图片的预测结果计算loss ###

loss的计算分为两个部分：  
**1、Box Smooth Loss：获取所有正标签的框的预测结果的回归loss。  
2、MultiBox Loss：获取所有种类的预测结果的交叉熵loss。  
3、Lamdmark Smooth Loss：获取所有正标签的人脸关键点的预测结果的回归loss。**

由于在Retinaface的训练过程中，**正负样本极其不平衡，即 存在对应真实框的先验框可能只有若干个，但是不存在对应真实框的负样本却有几千上万个，这就会导致负样本的loss值极大**，因此**我们可以考虑减少负样本的选取，常见的情况是取七倍正样本数量的负样本用于训练**。

在计算loss的时候要注意，**Box Smooth Loss计算的是所有被认定为内部包含人脸的先验框的loss**，而**Lamdmark Smooth Loss计算的是所有被认定为内部包含人脸同时包含人脸关键点的先验框的loss**。（在标注的时候有些**人脸框因为角度问题以及清晰度问题是没有人脸关键点的**）。  
实现代码如下：

def softmax_loss(y_true, y_pred):
        y_pred = tf.maximum(y_pred, 1e-7)
        softmax_loss = -tf.reduce_sum(y_true * tf.log(y_pred),
                                        axis=-1)
        return softmax_loss
    
    def conf_loss(neg_pos_ratio = 7,negatives_for_hard = 100):
        def _conf_loss(y_true, y_pred):
            batch_size = tf.shape(y_true)[0]
            num_boxes = tf.to_float(tf.shape(y_true)[1])
            
            labels         = y_true[:, :, :-1]
            classification = y_pred
    
            cls_loss = softmax_loss(labels, classification)
            
            num_pos = tf.reduce_sum(y_true[:, :, -1], axis=-1)
            
            pos_conf_loss = tf.reduce_sum(cls_loss * y_true[:, :, -1],
                                          axis=1)
            # 获取一定的负样本
            num_neg = tf.minimum(neg_pos_ratio * num_pos,
                                 num_boxes - num_pos)
    
    
            # 找到了哪些值是大于0的
            pos_num_neg_mask = tf.greater(num_neg, 0)
            # 获得一个1.0
            has_min = tf.to_float(tf.reduce_any(pos_num_neg_mask))
            num_neg = tf.concat( axis=0,values=[num_neg,
                                    [(1 - has_min) * negatives_for_hard]])
    
            # 求平均每个图片要取多少个负样本
            num_neg_batch = tf.reduce_mean(tf.boolean_mask(num_neg,
                                                          tf.greater(num_neg, 0)))
            num_neg_batch = tf.to_int32(num_neg_batch)
    
            max_confs = y_pred[:, :, 1]
    
            # 取top_k个置信度，作为负样本
            x, indices = tf.nn.top_k(max_confs * (1 - y_true[:, :, -1]),
                                     k=num_neg_batch)
    
            # 找到其在1维上的索引
            batch_idx = tf.expand_dims(tf.range(0, batch_size), 1)
            batch_idx = tf.tile(batch_idx, (1, num_neg_batch))
            full_indices = (tf.reshape(batch_idx, [-1]) * tf.to_int32(num_boxes) +
                            tf.reshape(indices, [-1]))
    
            neg_conf_loss = tf.gather(tf.reshape(cls_loss, [-1]),
                                      full_indices)
            neg_conf_loss = tf.reshape(neg_conf_loss,
                                       [batch_size, num_neg_batch])
            neg_conf_loss = tf.reduce_sum(neg_conf_loss, axis=1)
    
    
            num_pos = tf.where(tf.not_equal(num_pos, 0), num_pos,
                                tf.ones_like(num_pos))
            total_loss = tf.reduce_sum(pos_conf_loss) + tf.reduce_sum(neg_conf_loss)
            total_loss /= tf.reduce_sum(num_pos)
            # total_loss = tf.Print(total_loss,[labels,full_indices,tf.reduce_sum(pos_conf_loss)/tf.reduce_sum(num_pos),tf.reduce_sum(neg_conf_loss)/tf.reduce_sum(num_pos),tf.reduce_sum(num_pos)])
            return total_loss
        return _conf_loss
    
    def box_smooth_l1(sigma=1):
        sigma_squared = sigma ** 2
    
        def _smooth_l1(y_true, y_pred):
            regression        = y_pred
            regression_target = y_true[:, :, :-1]
            anchor_state      = y_true[:, :, -1]
    
            # 找到正样本
            indices           = tf.where(keras.backend.not_equal(anchor_state, 0))
            regression        = tf.gather_nd(regression, indices)
            regression_target = tf.gather_nd(regression_target, indices)
    
            # 计算 smooth L1 loss
            # f(x) = 0.5 * (sigma * x)^2          if |x| < 1 / sigma / sigma
            #        |x| - 0.5 / sigma / sigma    otherwise
            regression_diff = regression - regression_target
            regression_diff = keras.backend.abs(regression_diff)
            regression_loss = backend.where(
                keras.backend.less(regression_diff, 1.0 / sigma_squared),
                0.5 * sigma_squared * keras.backend.pow(regression_diff, 2),
                regression_diff - 0.5 / sigma_squared
            )
    
            normalizer = keras.backend.maximum(1, keras.backend.shape(indices)[0])
            normalizer = keras.backend.cast(normalizer, dtype=keras.backend.floatx())
            loss = keras.backend.sum(regression_loss) / normalizer
    
            return loss
    
        return _smooth_l1
    
    def ldm_smooth_l1(sigma=1):
        sigma_squared = sigma ** 2
    
        def _smooth_l1(y_true, y_pred):
            regression        = y_pred
            regression_target = y_true[:, :, :-1]
            anchor_state      = y_true[:, :, -1]
    
            # 找到正样本
            indices           = tf.where(keras.backend.equal(anchor_state, 1))
            regression        = tf.gather_nd(regression, indices)
            regression_target = tf.gather_nd(regression_target, indices)
    
            # 计算 smooth L1 loss
            # f(x) = 0.5 * (sigma * x)^2          if |x| < 1 / sigma / sigma
            #        |x| - 0.5 / sigma / sigma    otherwise
            regression_diff = regression - regression_target
            regression_diff = keras.backend.abs(regression_diff)
            regression_loss = backend.where(
                keras.backend.less(regression_diff, 1.0 / sigma_squared),
                0.5 * sigma_squared * keras.backend.pow(regression_diff, 2),
                regression_diff - 0.5 / sigma_squared
            )
    
            normalizer = keras.backend.maximum(1, keras.backend.shape(indices)[0])
            normalizer = keras.backend.cast(normalizer, dtype=keras.backend.floatx())
            loss = keras.backend.sum(regression_loss) / normalizer
    
            return loss
    
        return _smooth_l1

# 训练自己的Retinaface模型 #

Retinaface整体的文件夹构架如下：  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 7]  
本文使用论文中的Widerface数据集用于训练。  
![在这里插入图片描述][20200620143500177.png_pic_center]  
数据集我已经按照格式放好上传百度网盘了。  
**在训练前，在train.py文件里面修改自己所要用的backbone和对应的预训练权重就可以开始训练了**。  
（有需要的同学可以自己从mobilenetV1-0.25开始训练，也就是下载mobilenetV1-0.25的权重并载入。）  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 8]  
运行train.py即可开始训练。  
![在这里插入图片描述][20200330163715900.png_pic_center]

[20190723165901974.jpg_pic_center]: https://img-blog.csdnimg.cn/20190723165901974.jpg#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center]: https://img-blog.csdnimg.cn/20200620130451472.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[https_github.com_bubbliiiing_retinaface-keras]: https://github.com/bubbliiiing/retinaface-keras
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 1]: https://img-blog.csdnimg.cn/20191030154355407.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[20191030153845940.png_pic_center]: https://img-blog.csdnimg.cn/20191030153845940.png#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 2]: https://img-blog.csdnimg.cn/20200620132955413.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 3]: https://img-blog.csdnimg.cn/20200525115014785.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70]: https://img-blog.csdnimg.cn/2020062013312358.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70
[20200620134532236.png_pic_center]: https://img-blog.csdnimg.cn/20200620134532236.png#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 4]: https://img-blog.csdnimg.cn/20200129210050147.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 5]: https://img-blog.csdnimg.cn/20200526140617608.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 6]: https://img-blog.csdnimg.cn/20200519211538419.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 7]: https://img-blog.csdnimg.cn/20200620143342847.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[20200620143500177.png_pic_center]: https://img-blog.csdnimg.cn/20200620143500177.png#pic_center
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA_size_16_color_FFFFFF_t_70_pic_center 8]: https://img-blog.csdnimg.cn/20200620143605568.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80NDc5MTk2NA==,size_16,color_FFFFFF,t_70#pic_center
[20200330163715900.png_pic_center]: https://img-blog.csdnimg.cn/20200330163715900.png#pic_center