linux 8t硬盘分区,linux 磁盘分区

川长思鸟来 2023-01-21 09:28 28阅读 0赞

创建一个扩展分区：

\[root@qing init.d\]\# fdisk /dev/sdb

WARNING: DOS-compatible mode is deprecated. It's strongly

recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help):

Command (m for help): p

Disk /dev/sdb: 5368 MB, 5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x3c8b5df6

Device

Boot     Start        End     Blocks  Id System

Command (m for help): n

Command action

e  extended

p  primary partition (1-4)

Partition number (1-4): 1

First cylinder (1-652, default 1):

Using default value 1

Last cylinder, +cylinders or +size\{K,M,G\} (1-652, default

652):

Using default value 652

Command (m for help): p

Disk /dev/sdb: 5368 MB, 5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x3c8b5df6

Device

Boot     Start        End     Blocks  Id System

/dev/sdb1              1        652    5237158+  5 Extended

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

\[root@qing init.d\]\#

格式化：

问题，扩展分区不能格式化，需要创建逻辑分区后格式化

\[root@qing init.d\]\# mkfs -t ext3 /dev/sdb1

mke2fs 1.41.12 (17-May-2010)

mkfs.ext3: inode\_size (128) \* inodes\_count (0) too big for a

filesystem with 0 blocks, specify higher inode\_ratio (-i)

or lower inode count (-N).

\[root@qing init.d\]\#

创建逻辑分区：

1、查看分区信息

\[root@qing init.d\]\# fdisk -l

Disk /dev/sda: 26.8 GB, 26843545600 bytes

255 heads, 63 sectors/track, 3263 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00062b86

Device

Boot     Start        End     Blocks  Id System

/dev/sda1  \*          1         64     512000  83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2             64       3264   25701376  8e Linux LVM

Disk /dev/sdb: 5368 MB,

5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x3c8b5df6

Device

Boot     Start        End     Blocks  Id System

/dev/sdb1            1        652    5237158+  5 Extended

Disk /dev/mapper/vg\_qing-lv\_root: 24.2 GB, 24234688512 bytes

255 heads, 63 sectors/track, 2946 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/mapper/vg\_qing-lv\_root doesn't contain a valid partition

table

Disk /dev/mapper/vg\_qing-lv\_swap: 2080 MB, 2080374784 bytes

255 heads, 63 sectors/track, 252 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/mapper/vg\_qing-lv\_swap doesn't contain a valid partition

table

2、开始创建逻辑分区

\[root@qing init.d\]\# fdisk /dev/sdb

WARNING: DOS-compatible mode is deprecated. It's strongly

recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help):

Command (m for help): n

Command action

l  logical (5 or over)

p  primary partition (1-4)

First cylinder (1-652, default 1):

Using default value 1

Last cylinder, +cylinders or +size\{K,M,G\} (1-652, default

652):

Using default value 652

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

\[root@qing init.d\]\#

3、查看创建的逻辑分区

\[root@qing init.d\]\# fdisk

\-l

Disk /dev/sda: 26.8 GB, 26843545600 bytes

255 heads, 63 sectors/track, 3263 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00062b86

Device

Boot     Start        End     Blocks  Id System

/dev/sda1  \*          1         64     512000  83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2             64       3264   25701376  8e Linux LVM

Disk /dev/sdb: 5368 MB, 5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x3c8b5df6

Device

Boot     Start        End     Blocks  Id System

/dev/sdb1              1        652    5237158+  5 Extended

/dev/sdb5           1        652    5237127  83 Linux

Disk /dev/mapper/vg\_qing-lv\_root: 24.2 GB, 24234688512 bytes

255 heads, 63 sectors/track, 2946 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/mapper/vg\_qing-lv\_root doesn't contain a valid partition

table

Disk /dev/mapper/vg\_qing-lv\_swap: 2080 MB, 2080374784 bytes

255 heads, 63 sectors/track, 252 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/mapper/vg\_qing-lv\_swap doesn't contain a valid partition

table

4、格式化分区

\[root@qing init.d\]\# mkfs -t ext3 /dev/sdb5

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

327680 inodes, 1309281 blocks

65464 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=1342177280

40 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736

Writing inode tables:

done

Creati

linux 8t硬盘分区,linux 磁盘分区

发表评论取消回复

还没有评论，来说两句吧...

相关阅读

相关 linux 磁盘分区

相关 linux 8t硬盘分区,linux 磁盘分区

相关 linux分区概念理解,磁盘分区基础和LINUX上硬盘分区设备号解释

相关 linux硬盘分区PPT,Linux下硬盘分区具体步骤

相关 Linux 硬盘分区格式化

相关 Linux系统磁盘分区

相关【Linux】磁盘分区原理

相关 Linux挂载磁盘分区

相关 Linux磁盘分区

相关 linux 硬盘分区