docker-compose多主机部署zookeeper集群、kafka集群

我会带着你远行 2023-01-21 01:15 625阅读 0赞

1、创建docker-compose文件

主机一：

version: '3.4'
     
    services:
      zookeeper:
        image: harbor-test.aitdcoin.com/sgpexchange/zookeeper:v3.4.13
        restart: always
        hostname: zookeeper
        container_name: zookeeper
        ports:
        - 2181:2181
        - 2888:2888
        - 3888:3888
        volumes:
        - "./data:/opt/zookeeper-3.4.13/data"
        - "./conf/zoo.cfg:/opt/zookeeper-3.4.13/conf/zoo.cfg"
        environment:
          TZ: Asia/Shanghai
        networks:
          - zookeeper-net
     
    networks:
      zookeeper-net:
        driver: bridge

主机二：

主机三：

version: '3.4'
     
    services:
      zookeeper:
        image: harbor-test.aitdcoin.com/sgpexchange/zookeeper:v3.4.13
        restart: always
        hostname: zookeeper
        container_name: zookeeper
        ports:
        - 2181:2181
        - 2888:2888
        - 3888:3888
        volumes:
        - "./data:/opt/zookeeper-3.4.13/data"
        - "./conf/zoo.cfg:/opt/zookeeper-3.4.13/conf/zoo.cfg"
        environment:
          #ZOO_MY_ID: 3 
          #ZOO_SERVERS: server.1=192.168.8.51:2888:3888 server.2=192.168.8.61:2888:3888 server.3=0.0.0.0:2888:3888
          TZ: Asia/Shanghai
        networks:
          - zookeeper-net
     
    networks:
      zookeeper-net:
        driver: bridge

三台主机都要配置，其中hostname自己定义，注意IP地址和myid更改

2、修改配置文件

[root@sgpexchangeintermediate-192-168-8-62 zookeeper]# vim conf/zoo.cfg 
    
    # The number of milliseconds of each tick
    tickTime=2000
    # The number of ticks that the initial 
    # synchronization phase can take
    initLimit=10
    # The number of ticks that can pass between 
    # sending a request and getting an acknowledgement
    syncLimit=5
    # the directory where the snapshot is stored.
    # do not use /tmp for storage, /tmp here is just 
    # example sakes.
    dataDir=/opt/zookeeper-3.4.13/data
    # the port at which the clients will connect
    clientPort=2181
    # the maximum number of client connections.
    # increase this if you need to handle more clients
    #maxClientCnxns=60
    #
    # Be sure to read the maintenance section of the 
    # administrator guide before turning on autopurge.
    #
    # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
    #
    # The number of snapshots to retain in dataDir
    autopurge.snapRetainCount=3
    # Purge task interval in hours
    # Set to "0" to disable auto purge feature
    autopurge.purgeInterval=1
    
    minSessionTimeout=16000
    maxSessionTimeout=30000
    server.1=192.168.8.51:2888:3888
    server.2=192.168.8.61:2888:3888
    server.3=0.0.0.0:2888:3888

更改myid文件

[root@sgpexchangeintermediate-192-168-8-62 zookeeper]# cat data/myid 
    3

3、启动zookeeper各个节点

[root@sgpexchangemysql-192-168-8-61 zookeeper]# docker-compose up -d
    Creating network "zookeeper_zookeeper-net" with driver "bridge"
    Creating zookeeper ... done

4、测试集群连通性

#随意进入一台主机添加一个根节点目录
    [root@sgpexchangeintermediate-192-168-8-62 zookeeper]# docker exec -it zookeeper /bin/bash
    root@zookeeper3:/opt/zookeeper-3.4.13# cd bin/
    root@zookeeper3:/opt/zookeeper-3.4.13/bin# ./zkCli.sh -server 192.168.8.51:2181
    Connecting to 192.168.8.51:2181
    
    
    WatchedEvent state:SyncConnected type:None path:null
    [zk: 192.168.8.51:2181(CONNECTED) 0] create /project zookeeper
    Node already exists: /project
    [zk: 192.168.8.51:2181(CONNECTED) 1] get /project
    zookeeper_project
    cZxid = 0x9
    ctime = Thu May 13 11:24:46 UTC 2021
    mZxid = 0x9
    mtime = Thu May 13 11:24:46 UTC 2021
    pZxid = 0x9
    cversion = 0
    dataVersion = 0
    aclVersion = 0
    ephemeralOwner = 0x0
    dataLength = 17
    numChildren = 0
    # 在第二个根节点查询节点目录情况
    [zk: 192.168.8.51:2181(CONNECTED) 2] root@zookeeper3:/opt/zookeeper-3.4.13/bin# ./zkCli.sh -server 192.168.8.61:2181
    Connecting to 192.168.8.61:2181
    
    [zk: 192.168.8.61:2181(CONNECTED) 1] get /project
    zookeeper_project
    cZxid = 0x2
    ctime = Thu May 13 11:14:34 UTC 2021
    mZxid = 0x2
    mtime = Thu May 13 11:14:34 UTC 2021
    pZxid = 0x2
    cversion = 0
    dataVersion = 0
    aclVersion = 0
    ephemeralOwner = 0x0
    dataLength = 17
    numChildren = 0
    [zk: 192.168.8.61:2181(CONNECTED) 2] root@zookeeper3:/opt/zookeeper-3.4.13/bin# ./zkCli.sh -server 192.168.8.62:2181
    Connecting to 192.168.8.62:2181
    
    # 在第三个根节点查询新增节点目录
    [zk: 192.168.8.62:2181(CONNECTED) 0] get /project
    zookeeper_project
    cZxid = 0xb
    ctime = Thu May 13 11:26:47 UTC 2021
    mZxid = 0xb
    mtime = Thu May 13 11:26:47 UTC 2021
    pZxid = 0xb
    cversion = 0
    dataVersion = 0
    aclVersion = 0
    ephemeralOwner = 0x0
    dataLength = 17
    numChildren = 0
    [zk: 192.168.8.62:2181(CONNECTED) 1]

或查看各zookeeper节点状态

[root@sgpexchangeintermediate-192-168-8-62 zookeeper]# docker exec -it zookeeper /bin/bash
    root@zookeeper:/opt/zookeeper-3.4.13# cd bin/
    root@zookeeper:/opt/zookeeper-3.4.13/bin# ./zkServer.sh status
    ZooKeeper JMX enabled by default
    Using config: /opt/zookeeper-3.4.13/bin/../conf/zoo.cfg
    Mode: leader
    
    [root@sgpexchangemysql-192-168-8-61 zookeeper]# docker exec -it zookeeper /bin/bash
    root@zookeeper:/opt/zookeeper-3.4.13# cd bin/
    root@zookeeper:/opt/zookeeper-3.4.13/bin# ./zkServer.sh status
    ZooKeeper JMX enabled by default
    Using config: /opt/zookeeper-3.4.13/bin/../conf/zoo.cfg
    Mode: follower
    
    [root@sgpexchangenginx-192-168-8-51 zookeeper]# docker exec -it zookeeper /bin/bash
    root@zookeeper:/opt/zookeeper-3.4.13# cd bin/
    root@zookeeper:/opt/zookeeper-3.4.13/bin# ./zkServer.sh status
    ZooKeeper JMX enabled by default
    Using config: /opt/zookeeper-3.4.13/bin/../conf/zoo.cfg
    Mode: follower

二、部署kafka集群

1、编写docker-compose文件

主机一

[root@sgpexchangeinetermediate-192-168-8-63 kafka]# vim docker-compose.yml 
    
    version: '2'
    
    services:
      kafka1:
        image: harbor-test.sgpexchange.com/sgpexchange/kafka:v2.7.0
        restart: always
        hostname: kafka
        container_name: kafka
        ports:
        - 9092:9092
        environment:
          KAFKA_ADVERTISED_HOST_NAME: kafka
          KAFKA_ADVERTISED_PORT: 9092
          KAFKA_ZOOKEEPER_CONNECT: 192.168.8.63:2181,192.168.8.61:2181,192.168.8.62:2181
          KAFKA_ADVERTISED_LISTENERS: PLAINTEXT://192.168.8.63:9092
          TZ: Asia/Shanghai
        volumes:
        - ./logs:/kafka
        #external_links:
        #- 192.168.8.51
        #- 192.168.8.61
        #- 192.168.8.61
        networks:
          kafka-net:
    
    networks:
      kafka-net:
        driver: bridge

主机二：

[root@sgpexchangeintermediate-192-168-8-62 kafka]# vim docker-compose.yml 
    
    version: '2'
    
    services:
      kafka1:
        image: harbor-test.sgpexchange.com/sgpexchange/kafka:v2.7.0
        restart: always
        hostname: kafka
        container_name: kafka
        ports:
        - 9092:9092
        environment:
          KAFKA_ADVERTISED_HOST_NAME: kafka
          KAFKA_ADVERTISED_PORT: 9092
          KAFKA_ZOOKEEPER_CONNECT: 192.168.8.63:2181,192.168.8.61:2181,192.168.8.62:2181
          KAFKA_ADVERTISED_LISTENERS: PLAINTEXT://192.168.8.62:9092
          TZ: Asia/Shanghai
        volumes:
        - ./logs:/kafka
        #external_links:
        #- 192.168.8.63
        #- 192.168.8.61
        #- 192.168.8.61
        networks:
          kafka-net:
    
    networks:
      kafka-net:
        driver: bridge

主机三

2、启动kafka个节点

[root@sgpexchangenginx-192-168-8-61 kafka]# docker-compose up -d
    Creating network "kafka_kafka-net" with driver "bridge"
    Pulling kafka1 (harbor-test.aitdcoin.com/sgpexchange/kafka:v2.7.0)...
    v2.7.0: Pulling from sgpexchange/kafka
    e7c96db7181b: Pull complete
    f910a506b6cb: Pull complete
    b6abafe80f63: Pull complete
    fc8281eb3951: Pull complete
    d50ae6888ae4: Pull complete
    e59aa960c952: Pull complete
    Digest: sha256:da7dd66b9e6429ac122a07a259d34c7c43f47bf3fb933b1b5ff1e46f676b6941
    Status: Downloaded newer image for harbor-test.aitdcoin.com/sgpexchange/kafka:v2.7.0
    Creating kafka ... done