python2.7 读取和写入ini及csv文件+时间计算

系统管理员 2023-01-02 04:27 94阅读 0赞

本代码是利用读取的csv获取需要新增的ini信息，再读取ini，在原有的ini文件后面新增信息，但是不能在文件的后面插入。

中间涉及到字符串与日期时间类型的转换

# -*- coding: utf-8 -*-
    """
    Created on Sun Jan  3 13:32:25 2021
    
    @author: 10+1
    """
    
    import ConfigParser
    import csv
    import datetime
    
    
    #本程序可以负责利用csv表格生成对应ini及csv记录表，修改一共四个路径
    csv_file=csv.reader(open('H:\\mission\\satelliateJiashan\\test2.csv','r'))
    cfg1 = "H:\\mission\\satelliateJiashan\\TEST.ini"
    conf = ConfigParser.ConfigParser()
    conf.read(cfg1)
    content=[]
    sections=conf.sections() 
    maxsections=int(sections[0])
    for line in csv_file:
        print(line) #打印文件每一行的信息
       
        #时间的处理
        dateTime_s = datetime.datetime.strptime(line[1],'%Y-%m-%d %H:%M:%S')+datetime.timedelta(seconds=-20)
        dateTime_e = datetime.datetime.strptime(line[2],'%Y-%m-%d %H:%M:%S')+datetime.timedelta(seconds=20)
        str_s=dateTime_s.strftime("%Y.%m.%d %H:%M:%S")
        str_e=dateTime_e.strftime("%Y.%m.%d %H:%M:%S")
        print line[0],str_s,str_e
        conf.add_section(str(maxsections+1))
        maxsections=maxsections+1
        if line[0]=='SUOMINPP':
            line[0]='NPP'
        conf.set(str(maxsections),"description",line[0])
        conf.set(str(maxsections),"start",str_s)
        conf.set(str(maxsections),"stop",str_e)
        address=''
        if line[0]=='AQUA':
            address='C:/Program Files/ALMUR/bin/INI/AQUA_config.ini'
        elif line[0]=='NOAA20':
            address='C:/Program Files/ALMUR/bin/INI/NOAA20.ini'
        elif line[0]=='TERRA':
            address='C:/Program Files/ALMUR/bin/INI/Terra_720_DataPath-D-Alex.ini'
        #其他的卫星需要自行添加
        conf.set(str(maxsections),"config",address)
        print line[0],str_s,str_e,address
        line[1]=str_s
        line[2]=str_e
        line.append(address)
        content.append(line)
    
    #输出文件csv，为了腾讯表格
    csvfile = open('H:\\mission\\satelliateJiashan\\test2recorder.csv', 'wb')  #打开方式还可以使用file对象
    writer = csv.writer(csvfile)
    writer.writerows(content)
    csvfile.close()
    #s输出文件ini配置
    conf.write(open("H:\\mission\\satelliateJiashan\\TEST2.ini","w"))