【MyBatis】执行原理（四）：Executor 执行SQL源码分析

浅浅的花香味﹌ 2022-12-28 09:17 284阅读 0赞

通过前三篇的分析，我们已经了解了 SqlSessionFactory，SqlSession，MapperProxy 底层的逻辑

*  [【MyBatis】执行原理（一）：创建会话工厂(SqlSessionFactory) --配置解析源码分析][MyBatis_SqlSessionFactory_ --]
 *  [【MyBatis】执行原理（二）：创建会话(SqlSession) 源码分析][MyBatis_SqlSession_]
 *  [【MyBatis】执行原理（三）：获取代理对象(MapperProxy) 源码分析][MyBatis_MapperProxy_]

String resource = "mybatis-config.xml"; 
    InputStream inputStream = Resources. getResourceAsStream(resource); 
    // build 最终返回了 SqlSessionFactory 接口的默认实现 DefaultSqlSessionFactory
    SqlSessionFactory sqlSessionFactory = new SqlSessionFactoryBuilder().build(inputStream);
    
    // openSession 最终返回SqlSession接口的一个默认实现DefaultSqlSession 
    SqlSession session = sqlSessionFactory.openSession(); 
    
    // 方式一：直接使用 DefaultSqlSession，硬编码，不推荐
    Blog blog = session.selectBlogById(1); 
    
    // 方式二：getMapper 最终返回了一个MapperProxy代理对象，推荐
    BlogMapper mapper = session.getMapper(BlogMapper.class);
    Blog blog = mapper.selectBlogById(1);

我们其实还有最关键的一步没有分析，就是 SqlSession 中的 Executor 到底是如何找到 mapper文件中的 SQL，然后执行它并返回结果的。

既然推荐使用方式二，那我们就以它作为入口。由于所有的 Mapper 都是 MapperProxy 代理对象，所以任意的方法都是执行 MapperProxy 的 invoke() 方法。现在问题来了，这里没有实现类，进入到 invoke 方法的时候做了什么事情？它是怎么找到我们要执行的SQL的？

> 引入MapperProxy 是为了解决硬编码和编译时检查问题。它需要做的事情是：根据方法查找Statement ID。

下面从 MapperProxy\#invoke 的源码看起…

### MapperProxy.invoke() ###

public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
        
      try {
        
        // 1.判断当前接口是否有默认方法（default）
        if (Object.class.equals(method.getDeclaringClass())) {
        
          return method.invoke(this, args);
        } else if (isDefaultMethod(method)) {
        
          return invokeDefaultMethod(proxy, method, args);
        }
      } catch (Throwable t) {
        
        throw ExceptionUtil.unwrapThrowable(t);
      }
      // 2.获取缓存，保存了方法签名和接口方法关系
      final MapperMethod mapperMethod = cachedMapperMethod(method);
      // 3.调用MapperMethod的excute方法
      // 注：这里是通过DefaultSqlSession的Executor去执行方法的（Mapper接口没有实现对象）
      return mapperMethod.execute(sqlSession, args);
    }
    
     private MapperMethod cachedMapperMethod(Method method) {
        
        // key不存在或value为null，则新加缓存
        return methodCache.computeIfAbsent(method, k -> new MapperMethod(mapperInterface, method, sqlSession.getConfiguration()));
      }

### MapperMethod.excute() ###

public Object execute(SqlSession sqlSession, Object[] args) {
        
      Object result;
      switch (command.getType()) {
        
        // insert
        case INSERT: {
        
          Object param = method.convertArgsToSqlCommandParam(args);
          result = rowCountResult(sqlSession.insert(command.getName(), param));
          break;
        }
        // update
        case UPDATE: {
        
          Object param = method.convertArgsToSqlCommandParam(args);
          result = rowCountResult(sqlSession.update(command.getName(), param));
          break;
        }
        // delete
        case DELETE: {
        
          Object param = method.convertArgsToSqlCommandParam(args);
          result = rowCountResult(sqlSession.delete(command.getName(), param));
          break;
        }
        // select
        case SELECT:
          if (method.returnsVoid() && method.hasResultHandler()) {
        
            executeWithResultHandler(sqlSession, args);
            result = null;
          } else if (method.returnsMany()) {
        
            result = executeForMany(sqlSession, args);
          } else if (method.returnsMap()) {
        
            result = executeForMap(sqlSession, args);
          } else if (method.returnsCursor()) {
        
            result = executeForCursor(sqlSession, args);
          } else {
        
            // 进行参数转换，转换成sql参数！！！
            Object param = method.convertArgsToSqlCommandParam(args);
            // 最终还是调用sqlsession的selectOne方法！！！
            // 通过内部类SqlCommand拿到statementId
            result = sqlSession.selectOne(command.getName(), param);
            if (method.returnsOptional()&& (result == null || !method.getReturnType().equals(result.getClass()))) {
        
              result = Optional.ofNullable(result);
            }
          }
          break;
        case FLUSH:
          result = sqlSession.flushStatements();
          break;
        default:
          throw new BindingException("Unknown execution method for: " + command.getName());
      }
      if (result == null && method.getReturnType().isPrimitive() && !method.returnsVoid()) {
        
        throw new BindingException("Mapper method '" + command.getName()
            + " attempted to return null from a method with a primitive return type (" 
            + method.getReturnType() + ").");
      }
      return result;
    }

> PS：如果是采用上面的方式一（session.selectOne），就没有以上两个函数调用过程，直接到 DefaultSqlSession\#selectOne。

### DefaultSqlSession.selectOne() ###

public <T> T selectOne(String statement, Object parameter) {
        
      // selectOne只是selectList的特殊情况
      List<T> list = this.selectList(statement, parameter);
      if (list.size() == 1) {
        
        return list.get(0);
      } else if (list.size() > 1) {
        
        throw new TooManyResultsException("Expected one result (or null) to be returned by 
        selectOne(), but found: " + list.size());
      } else {
        
        return null;
      }
    }

### DefaultSqlSession.selectList() ###

public <E> List<E> selectList(String statement, Object parameter) {
        
      // 传入默认分页（内存分页），size=0，page=0
      return this.selectList(statement, parameter, RowBounds.DEFAULT);
    }
    
    @Override
    public <E> List<E> selectList(String statement, Object parameter, RowBounds rowBounds) {
        
      try {
        
        // 根据statementId拿到MappedStatement
        // 这个ms有我们在xml中配置的所有属性，包括id、statementType、sqlSource、useCache、入参、出参等等。
        MappedStatement ms = configuration.getMappedStatement(statement);
        // 调用Excutor的query方法
        return executor.query(ms, wrapCollection(parameter), rowBounds, Executor.NO_RESULT_HANDLER);
      } catch (Exception e) {
        
        throw ExceptionFactory.wrapException("Error querying database.  Cause: " + e, e);
      } finally {
        
        ErrorContext.instance().reset();
      }
    }

### BaseExcutor.query() ###

public <E> List<E> query(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler) throws SQLException {
        
      BoundSql boundSql = ms.getBoundSql(parameter);
      // 拼接cachekey,这个CacheKey就是缓存的Key
      // 从Configuration 中获取MappedStatement， 然后从BoundSql 中获取SQL信息
      CacheKey key = createCacheKey(ms, parameter, rowBounds, boundSql);
      return query(ms, parameter, rowBounds, resultHandler, key, boundSql);
    }
    
    public <E> List<E> query(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, 
    							CacheKey key, BoundSql boundSql) throws SQLException {
        
    							
        ErrorContext.instance().resource(ms.getResource()).activity("executing a query").object(ms.getId());
        if (closed) {
        
          throw new ExecutorException("Executor was closed.");
        }
        // 1.查询前处理
        // queryStack用于记录查询栈，防止递归查询重复处理缓存。
        // flushCache=true的时候，会先清理本地缓存（一级缓存）：clearLocalCache();
        if (queryStack == 0 && ms.isFlushCacheRequired()) {
        
          clearLocalCache();
        }
        List<E> list;
        try {
        
          queryStack++;
          // 2.先查询缓存
          list = resultHandler == null ? (List<E>) localCache.getObject(key) : null;
          if (list != null) {
        
            handleLocallyCachedOutputParameters(ms, key, parameter, boundSql);
          // 3.没有缓存就从数据库里查
          } else {
        
            list = queryFromDatabase(ms, parameter, rowBounds, resultHandler, key, boundSql);
          }
        } finally {
        
          queryStack--;
        }
        if (queryStack == 0) {
        
          for (DeferredLoad deferredLoad : deferredLoads) {
        
            deferredLoad.load();
          }
          deferredLoads.clear();
          // 4.如果LocalCacheScope == STATEMENT，会清理本地缓存
          if (configuration.getLocalCacheScope() == LocalCacheScope.STATEMENT) {
        
            clearLocalCache();
          }
        }
        return list;
      }

### BaseExcutor.queryFromDatabase() ###

private <E> List<E> queryFromDatabase(MappedStatement ms, Object parameter, RowBounds rowBounds, 
    ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
        
      List<E> list;
      // 1.缓存：先在缓存用占位符占位。执行查询后，移除占位符，放入数据
      localCache.putObject(key, EXECUTION_PLACEHOLDER);
      try {
        
        // 2.查询：执行Executor的doQuery()；默认是SimpleExecutor。
        list = doQuery(ms, parameter, rowBounds, resultHandler, boundSql);
      } finally {
        
        localCache.removeObject(key);
      }
      localCache.putObject(key, list);
      if (ms.getStatementType() == StatementType.CALLABLE) {
        
        localOutputParameterCache.putObject(key, parameter);
      }
      return list;
    }

### SimpleExcutor.doQuery() ###

public <E> List<E> doQuery(MappedStatement ms, Object parameter, RowBounds rowBounds, 
                               ResultHandler resultHandler, BoundSql boundSql) throws SQLException {
        
      Statement stmt = null;
      try {
        
        Configuration configuration = ms.getConfiguration();
        // 1.创建StatementHandle 
        StatementHandler handler = configuration.newStatementHandler(wrapper, ms, parameter, 
                                                                      rowBounds, resultHandler, boundSql);
        // 2.创建具体的statement
        stmt = prepareStatement(handler, ms.getStatementLog());
        // 3.执行sql，最后委托给PreparedStatement
        return handler.query(stmt, resultHandler);
      } finally {
        
        closeStatement(stmt);
      }
    }

### SimpleExcutor.newStatementHandler() ###

在configuration.newStatementHandler()中，new 一个StatementHandler，先得到 RoutingStatementHandler。

RoutingStatementHandler 里面没有任何的实现 ， 是用来创建基本的 StatementHandler 的。这里会根据 MappedStatement 里面的 statementType 决定 StatementHandler 的类型 。

public RoutingStatementHandler(Executor executor, MappedStatement ms, Object parameter, RowBounds 
    rowBounds, ResultHandler resultHandler, BoundSql boundSql) {
        
    
      switch (ms.getStatementType()) {
        
        case STATEMENT:
          delegate = new SimpleStatementHandler(executor, ms, parameter, rowBounds, resultHandler, 
          boundSql);
          break;
        // 默认是 PREPARED （ STATEMENT 、 PREPARED 、CALLABLE）。
        case PREPARED:
          delegate = new PreparedStatementHandler(executor, ms, parameter, rowBounds, resultHandler, 
          boundSql);
          break;
        case CALLABLE:
          delegate = new CallableStatementHandler(executor, ms, parameter, rowBounds, resultHandler, 
          boundSql);
          break;
        default:
          throw new ExecutorException("Unknown statement type: " + ms.getStatementType());
      }
    
    }

### SimpleExcutor.prepareStatement() ###

private Statement prepareStatement(StatementHandler handler, Log statementLog) throws SQLException {
        
      Statement stmt;
      // 在第一次执行sql时，创建连接
      Connection connection = getConnection(statementLog);
      stmt = handler.prepare(connection, transaction.getTimeout());
      // 对语句进行预编译，处理参数
      handler.parameterize(stmt);
      return stmt;
    }

### StatementHandler.query() ###

RoutingStatementHandler的query()方法。delegate 委派，最终执行PreparedStatementHandler的query()方法。

public <E> List<E> query(Statement statement, ResultHandler resultHandler) throws SQLException {
        
      PreparedStatement ps = (PreparedStatement) statement;
      // JDBC包PreparedStatement执行sql
      ps.execute();
      // 结果集处理
      return resultSetHandler.handleResultSets(ps);
    }

### ResultSetHandler.handlerResultSets() ###

ResultSetHandler 只有一个实现类：DefaultResultSetHandler。

@Override
    public List<Object> handleResultSets(Statement stmt) throws SQLException {
        
      ErrorContext.instance().activity("handling results").object(mappedStatement.getId());
    
      final List<Object> multipleResults = new ArrayList<>();
    
      int resultSetCount = 0;
      ResultSetWrapper rsw = getFirstResultSet(stmt);
     
      List<ResultMap> resultMaps = mappedStatement.getResultMaps();
      int resultMapCount = resultMaps.size();
      validateResultMapsCount(rsw, resultMapCount);
      while (rsw != null && resultMapCount > resultSetCount) {
        
        ResultMap resultMap = resultMaps.get(resultSetCount);
        handleResultSet(rsw, resultMap, multipleResults, null);
        rsw = getNextResultSet(stmt);
        cleanUpAfterHandlingResultSet();
        resultSetCount++;
      }
      // 拿到结果集，如果没有配置一个查询返回多个结果集的情况，一般只有一个结果集
      String[] resultSets = mappedStatement.getResultSets();
      if (resultSets != null) {
        
        // 如果下面的这个while循环我们也不用，就是执行一次。然后会调用handleResultSet()方法。
        while (rsw != null && resultSetCount < resultSets.length) {
        
          ResultMapping parentMapping = nextResultMaps.get(resultSets[resultSetCount]);
          if (parentMapping != null) {
        
            String nestedResultMapId = parentMapping.getNestedResultMapId();
            ResultMap resultMap = configuration.getResultMap(nestedResultMapId);
            handleResultSet(rsw, resultMap, null, parentMapping);
          }
          rsw = getNextResultSet(stmt);
          cleanUpAfterHandlingResultSet();
          resultSetCount++;
        }
      }
    
      return collapseSingleResultList(multipleResults);
    }

### =>总结 ###

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80MzkzNTkyNw_size_16_color_FFFFFF_t_70]

[MyBatis_SqlSessionFactory_ --]: https://blog.csdn.net/weixin_43935927/article/details/111247930
[MyBatis_SqlSession_]: https://blog.csdn.net/weixin_43935927/article/details/111269578
[MyBatis_MapperProxy_]: https://blog.csdn.net/weixin_43935927/article/details/111269526
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80MzkzNTkyNw_size_16_color_FFFFFF_t_70]: /images/20221120/8f310537e65f4aea9d1fdf90fbb3a3bb.png