CloudStack学习笔记-安装AllInOne

我会带着你远行 2022-12-19 13:15 151阅读 0赞

本文介绍CentOS 6.3操作系统主机安装 CloudStack 4.1.1 AllInOne的运行环境。  
**前置条件**  
Management Server, Database, and Storage System Requirements  
Operating system: Preferred: CentOS/RHEL 6.3+ or Ubuntu12.04(.1)  
64-bit x86 CPU (more cores results in better performance)  
4 GB of memory  
250 GB of local disk (more results in better capability; 500 GBrecommended)  
At least 1 NIC  
Statically allocated IP address  
Fully qualified domain name as returned by the hostnamecommand  
  
Host/Hypervisor System Requirements  
Must support HVM (Intel-VT or AMD-V enabled).  
64-bit x86 CPU (more cores results in better performance)  
Hardware virtualization support required  
4 GB of memory  
36 GB of local disk  
At least 1 NIC  
 When you deploy CloudStack, the hypervisor hostmust not have any VMs already running  
All hosts within a cluster must be homogeneous. The CPUs must be ofthe same type, count, and feature flags.  
  
KVM 主机需求http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/hypervisor-kvm-install-flow.html\#hypervisor-kvm-requirements  
XenServer 主机需求http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/citrix-xenserver-installation.html\#system-requirements-xenserver-hosts  
vSphere 主机需求http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/vmware-install.html\#vmware-requirements  
  
禁用IPv6  
\# service ip6tables stop  
\# chkconfig ip6tables off  
  
**（一）安装配置管理服务器**  
设置静态网络IP地址  
\#vim `/etc/sysconfig/network-scripts/ifcfg-eth0 除物理MAC,静态IP地址、网关、掩码以外，参考如下设置 DEVICE=eth0 HWADDR=00:1F:16:34:xx:yy ONBOOT=yes HOTPLUG=no BOOTPROTO=static IPV6INIT=no NM_CONTROLLED=no #这里不需要NetworkManager托管网络配置，将NetworkManager断开Wired Networks和Wireless Networks TYPE=Ethernet IPADDR=192.168.0.103 NETMASK=255.255.255.0 DNS1=202.96.134.33 DNS2=202.96.128.86 DOMAIN=cloudstack.org`  
  
Host名称  
\# vim /etc/sysconfig/network  
NETWORKING=yes  
HOSTNAME=mgmt1.cloudstack.org  
NETWORKING\_IPV6=no  
NOZEROCONF=yes  
GATEWAY=192.168.0.1  
  
\# vim /etc/hosts  
127.0.0.1   localhost  
192.168.0.103 mgmt1.cloudstack.org  
  
DNS（广东电信）  
\# vim /etc/resolv.conf  
nameserver 127.0.0.1  
\# Generated by NetworkManager  
search cloudstack.org  
nameserver 202.96.134.33  
nameserver 202.96.128.86  
  
`重启网络` `#` `service networkrestart`  
`开机启用网络 #` `chkconfig networkon`  
开机启用NetworkManager  
\# chkconfig --add NetworkManager  
\# chkconfig NetworkManager on  
  
验证网络  
\# ping 192.168.0.1  
\# ping www.baidu.com  
\# hostname --fqdn  
  
安装并启动NTP服务器  
\#yum install ntp  
\# service ntpd start  
将其加入boot时启动  
\# chkconfig ntpd on  
  
  
安装CloudStack管理节点  
\#yum install cloudstack-management  
  
安装MySQL数据库  
\#yum install mysql-server  
修改/etc/my.cnf，在 \[mysqld\] 段 datadir 下增加以下内容：  
注意：若单个management节点max\_connections配置为350  
innodb\_rollback\_on\_timeout=1  
innodb\_lock\_wait\_timeout=600  
max\_connections=350  
log-bin=mysql-bin  
binlog-format = 'ROW'  
重启MySQL  
\#service mysqld restart  
  
建立安全链接，除了"Disallow root login remotely?"选项以外，全部选择“y”  
\#mysql\_secure\_installation  
  
放宽SELinux权限  
1）检查是否安装了selinux，如果没有，那么跳过后续步骤  
\#rpm -qa | grep selinux  
2）修改/etc/selinux/config，将SELINUX=enforcing修改为SELINUX=permissive  
3）及时生效  
\#setenforce permissive  
  
建立CloudStack的MySQL数据库帐户cloud及口令密码，以及初始化元数据：

\#cloudstack-setup-databasescloud:<dbpassword>@localhost \\

\--deploy-as=root:<password>\\

\-e <encryption\_type> \\

\-m <management\_server\_key>\\

\-k <database\_key> \\

\-i <management\_server\_ip>

以上命令根据实际情况替换，encryption\_type默认值为file，management\_server\_key默认值为password，database\_key默认值为password，详细参考http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/management-server-install-flow.html\#about-password-encryption,如下参考：  
\#cloudstack-setup-databases cloud:cloud@mgmt1.cloudstack.org \\

\--deploy-as=root:root \\

\-m cloud \\

\-k cloud \\

\-i mgmt1.cloudstack.org

若KVM hypervisor在同一台主机运行，那么修改/etc/sudoers增加以下内容：  
Defaults:cloud !requiretty  
  
初始化CloudStack管理服务器  
\#cloudstack-setup-management  
注意：只有XenServer需要下载vhd-util  
  
**（二）在其他节点独立安装数据库**  
若不是采取CloudStack的AllInOne方式，则需要在新主机上安装MySQL  
修改/etc/my.cnf，在 \[mysqld\] 段 datadir 下增加以下内容：  
innodb\_rollback\_on\_timeout=1  
innodb\_lock\_wait\_timeout=600  
max\_connections=350  
log-bin=mysql-bin  
binlog-format = 'ROW'  
bind-address = 0.0.0.0  
重启MySQL  
\#service mysqld restart  
  
将MySQL加入boot时启动  
\# chkconfig mysqld on  
  
建立安全链接，除了"Disallow root login remotely?"选项以外，全部选择“y”  
\#mysql\_secure\_installation  
  
修改防火墙，允许MySQL的3306端口运行  
\#vim /etc/sysconfig/iptables  
在:INPUT ACCEPT \[0:0\]下面增加以下内容：  
\-A INPUT -p tcp --dport 3306 -j ACCEPT  
重启iptables  
\#service iptables restart  
  
重新建立CloudStack的MySQL数据库帐户，以及初始化元数据，参考如上所述：

\#cloudstack-setup-databasescloud:<dbpassword>@localhost \\

\--deploy-as=root:<password>\\

\-e <encryption\_type> \\

\-m <management\_server\_key>\\

\-k <database\_key> \\

\-i <management\_server\_ip>

**（三）使用Management Server作为 NFS Server**  
生产环境建议独立安装网络文件系统，详细参考http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/management-server-install-flow.html\#nfs-shares-on-separate-server  
本文CloudStack的AllInOne方式，网络文件系统安装在同一主机  
\#yum install nfs-utils  
\#mkdir -p /export/primary  
\#mkdir -p /export/secondary  
\#vi /etc/exports  
填写以下内容：  
/export \*(rw,async,insecure,no\_root\_squash)  
NFS Server导出export目录  
\#exportfs -arv  
\#vi /etc/sysconfig/nfs  
取消以下行的注释  
LOCKD\_TCPPORT=32803  
LOCKD\_UDPPORT=32769  
MOUNTD\_PORT=892  
RQUOTAD\_PORT=875  
STATD\_PORT=662  
STATD\_OUTGOING\_PORT=2020  
修改iptables  
\#vi /etc/sysconfig/iptables  
在:INPUT ACCEPT\[0:0\]之前加入以下行：（这里<NETWORK>替换当前主机IP或域名）  
\-A INPUT -s <NETWORK> -m state--state NEW -p udp --dport 111 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 111 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 2049 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 32803 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p udp --dport 32769 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 892 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p udp --dport 892 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 875 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p udp --dport 875 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p tcp --dport 662 -j ACCEPT  
\-A INPUT -s <NETWORK> -m state--state NEW -p udp --dport 662 -j ACCEPT  
  
\# cat /etc/sysconfig/iptables  
如果IP不对，可通过命令进行修改：sed -i's/127.0.0.1/mgmt1.cloudstack.org/g'

/etc/sysconfig/iptables

重启iptables  
\#service iptables restart  
\#service iptables save  
修改hypervisor主机 和 Management服务器idmapd  
\#vi /etc/idmapd.conf  
取消Domain注释，并写入域名  
Domain = cloudstack.org  
重启Management服务器  
  
登录hypervisor主机，验证上述配置，并将其加入boot时启动  
\# service rpcbind start  
\# service nfs start  
\# chkconfig nfs on  
\# chkconfig rpcbind on  
\# reboot     
  
登录hypervisor主机，在Management服务器上 **测试**挂载/export目录  
\# mkdir /primarymount  
\# mount -t nfs mgmt1.cloudstack.org:/export/primary/primarymount  
\# umount /primarymount  
\# mkdir /secondarymount  
\# mount -t nfs mgmt1.cloudstack.org:/export/secondary/secondarymount  
\# umount /secondarymount  
检查是否挂载发生错误  
\# tail -f /var/log/messages  
  
验证NFS挂载情况  
\# reboot  
\# showmount -e mgmt1.cloudstack.org  
Export list for mgmt1.cloudstack.org:  
/export \*  
\# mount | grep primary  
\# mount -l  
... ...  
mgmt1.cloudstack.org:/export/primary on /mnt/b050decd-2d7f-3428-9dcf-81bd4b2fdeda type nfs (rw,noac,vers=4,addr=192.168.0.103,clientaddr=192.168.0.103)  
(当Zone配置完毕，Secondary storage vm s-1-VM 和Console proxy v-2-VM才会挂载到NFS存储)  
  
**（四）安装额外的其他管理节点服务器（可选）**  
开机启动服务  
\# service rpcbind start  
\# service nfs start  
\# chkconfig nfs on  
\# chkconfig rpcbind on  
重新建立CloudStack的MySQL数据库帐户，以及初始化元数据，参考如上所述：

\#cloudstack-setup-databasescloud:<dbpassword>@localhost \\

\--deploy-as=root:<password>\\

\-e <encryption\_type> \\

\-m <management\_server\_key>\\

\-k <database\_key> \\

\-i <management\_server\_ip>

初始化配置  
\# cloudstack-setup-management  
若有多台额外的管理服务器，重复执行上述步骤  
管理节点服务器间集群负载均衡配置参考以下链接：  
http://cloudstack.apache.org/docs/en-US/Apache\_CloudStack/4.1.1/html/Installation\_Guide/management-server-install-flow.html  
  
**（五）准备System VM Template**  
注意：若前述步骤CloudStack database 加密方式encryption type 选择的是 "web"，那么必须使用-s 参数：  
    For XenServer:  
  
    \#/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt-m /mnt/secondary -uhttp://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2-h xenserver -s -F  
  
    ForvSphere:  
  
    \#/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt-m /mnt/secondary -uhttp://download.cloud.com/templates/burbank/burbank-systemvm-08012012.ova-h vmware -s   -F  
  
    ForKVM:  
  
    \#/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt-m /mnt/secondary -uhttp://download.cloud.com/templates/acton/acton-systemvm-02062012.qcow2.bz2-h kvm -s -F  
  
本机KVM执行命令参考如下：  
\#/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt-m /secondarymount -uhttp://download.cloud.com/templates/acton/acton-systemvm-02062012.qcow2.bz2-h kvm -F -o mgmt1.cloudstack.org -r cloud -d cloud  
当然也可以下载到本机进行安装，命令由-u改为-f参数指定文件路径  
  
**（六）登录CloudStack**  
检测CloudStack运行状态  
\#service cloudstack-management status  
或者观察启动日志  
\#tail -100f /var/log/cloudstack/management/catalina.out  
成功启动后登录 http://mgmt1.cloudstack.org:8080/client 默认用户名及密码admin/password  
  
**（七）卸载CloudStack及MySQL数据库**  
\#yum remove cloudstack-management  
\#yum remove mysql-server