http/https监控获取响应时间（DNS解析时间，RRT时间，服务器处理时间等）

逃离我推掉我的手 2022-12-16 13:24 241阅读 0赞

有时候为了测试网络情况，需要返回每个阶段的耗时时间，比如DNS解析耗时，建立连接所消耗的时间，从建立连接到准备传输所使用的时间，从建立连接到传输开始所使用的时间，整个过程耗时，下载的数据量，下载速度，上传数据量，上传速度等等

有时候为了测试网络情况，需要返回每个阶段的耗时时间，比如DNS解析耗时，建立连接所消耗的时间，从建立连接到准备传输所使用的时间，从建立连接到传输开始所使用的时间，整个过程耗时，下载的数据量，下载速度，上传数据量，上传速度等等。下面的脚本获取以上信息：

CURL的资料参见： http://curl.haxx.se/libcurl/c/curl\_easy\_getinfo.html

复制代码 代码如下:

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#  
\#\#\# author: www.ttlsa.com \#\#\#  
\#\#\# QQ群: 39514058 \#\#\#  
\#\#\# E-mail: service@ttlsa.com \#\#\#  
\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#  
use strict;  
use Data::Dumper;  
use WWW::Curl::Easy;

if(!@ARGV)\{  
print "Usaging: $0 url\\n";  
print "For example: $0 www.ttlsa.com\\n";  
exit;  
\}

my $curl = new WWW::Curl::Easy;  
open my $response\_body,">/dev/null";  
$curl->setopt(CURLOPT\_HEADER,1);  
$curl->setopt(CURLOPT\_URL, $ARGV\[0\]);  
$curl->setopt(CURLOPT\_WRITEDATA,\\$response\_body);  
$curl->perform;  
my $err = $curl->errbuf;  
if(!$err)\{  
my $st = &getTime;  
my $http\_code = $curl->getinfo(CURLINFO\_RESPONSE\_CODE);  
my $http\_dns\_time = $curl->getinfo(CURLINFO\_NAMELOOKUP\_TIME);  
my $http\_conn\_time = $curl->getinfo(CURLINFO\_CONNECT\_TIME);  
\#my $http\_APP\_time = $curl->getinfo(CURLINFO\_APPCONNECT\_TIME);  
my $http\_PRE\_TRAN\_time = $curl->getinfo(CURLINFO\_PRETRANSFER\_TIME);  
my $http\_START\_TRAN\_time = $curl->getinfo(CURLINFO\_STARTTRANSFER\_TIME);  
my $http\_TOTAL\_time = $curl->getinfo(CURLINFO\_TOTAL\_TIME);  
my $http\_SIZE\_DOWN = $curl->getinfo(CURLINFO\_SIZE\_DOWNLOAD);  
my $http\_SPEED\_DOWN = $curl->getinfo(CURLINFO\_SPEED\_DOWNLOAD);

printf "local\_time: %s, http\_code: %d, dns\_time: %.3fms, conn\_time: %.3fms, pre\_tran\_time: %.3fms, start\_tran\_time: %.3fms, total\_time: %.3fms, size\_download: %dB, speed\_download: %dB/s",($st,$http\_code,$http\_dns\_time,$http\_conn\_time,$http\_PRE\_TRAN\_time,$http\_START\_TRAN\_time,$http\_TOTAL\_time,$http\_SIZE\_DOWN,$http\_SPEED\_DOWN);  
write;

format STDOUT\_TOP=  
站点各类响应时间明细-@||  
$%  
=========================  
\+---------------------+------+-------------+--------------+--------------------------+------------------------+-------------+-----------+------------+  
| 本地时间 | 状态 | DNS解析时间 | 建立连接时间 | 从建立连接到准备传输时间 |从建立连接到开始传输时间| 整个过程时间| 下载数据量|平均下载速度|  
\+---------------------+------+-------------+--------------+--------------------------+------------------------+-------------+-----------+------------+  
.

format STDOUT=  
|@<<<<<<<<<<<<<<<<<<<<| @<<<<| @<<<<<<<<<<<| @<<<<<<<<<<<<| @<<<<<<<<<<<<<<<<<<<<<<<<| @<<<<<<<<<<<<<<<<<<<<<<| @<<<<<<<<<<<| @<<<<<<<<<| @<<<<<<<<<<|  
$st,$http\_code,$http\_dns\_time."ms",$http\_conn\_time."ms",$http\_PRE\_TRAN\_time."ms",$http\_START\_TRAN\_time."ms",$http\_TOTAL\_time."ms",$http\_SIZE\_DOWN."B",$http\_SPEED\_DOWN."B/s"  
\+---------------------+------+-------------+--------------+--------------------------+------------------------+--------------+----------+------------+  
.  
\}else\{  
print "Error: $err\\n";  
\}

sub getTime()  
\{  
my @time=(localtime)\[5,4,3,2,1,0\];  
$time\[0\]+=1900;  
$time\[1\]+=1;  
return sprintf("%04u-%02u-%02u %02u:%02u:%02u",@time);  
\}

![06fe54f623196e680c4874e0be560369.png][]  
  
shell命令下也有相同的命令如下所示：

复制代码 代码如下:

\# curl -o /dev/null -s -w %\{http\_code\}:%\{http\_connect\}:%\{time\_namelookup\}:%\{time\_connect\}:%\{time\_pretransfer\}:%\{time\_starttransfer\}:%\{time\_total\}:%\{size\_download\}:%\{speed\_download\} www.ttlsa.com

不解释了，具体参见 man curl  
  
**使用 cURL 获取站点的各类响应时间 – dns解析时间,响应时间,传输时间**

复制代码 代码如下:

curl -o /dev/null -s -w %\{http\_code\}:%\{http\_connect\}:%\{content\_type\}:%\{time\_namelookup\}:%\{time\_redirect\}:%\{time\_pretransfer\}:%\{time\_connect\}:%\{time\_starttransfer\}:%\{time\_total\}:%\{speed\_download\} digdeeply.org

这是一个本人博客站点执行 curl 命令的情况。输出通常是 HTML 代码，通过 -o 参数发送到 /dev/null。-s 参数去掉所有状态信息。-w 参数让 curl 输出的计时器的状态信息。  
  
![2890095b9d31e4a1d2e5747b0a505b9a.png][]  
  
一次http请求中的各个时间段-dns解析,等待服务器响应,获取内容等  
  
下边对-w参数做个详细的解释，由我(DigDeeply)翻译。有不对的地方请大家指出。(英文原文：http://curl.haxx.se/docs/manpage.html)  
以下是可用的变量名：  
  
　-w, --write-out  
　以下变量会按CURL认为合适的格式输出，输出变量需要按照%\{variable\_name\}的格式，如果需要输出%，double一下即可，即%%，同时，\\n是换行，\\r是回车，\\t是TAB。  
  
url\_effective The URL that was fetched last. This is most meaningful if you've told curl to follow location: headers.  
  
filename\_effective The ultimate filename that curl writes out to. This is only meaningful if curl is told to write to a file with the --remote-name or --output option. It's most useful in combination with the --remote-header-name option. (Added in 7.25.1)  
  
http\_code http状态码，如200成功,301转向,404未找到,500服务器错误等。(The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer. In 7.18.2 the alias response\_code was added to show the same info.)  
  
http\_connect The numerical code that was found in the last response (from a proxy) to a curl CONNECT request. (Added in 7.12.4)  
  
time\_total 总时间，按秒计。精确到小数点后三位。 （The total time, in seconds, that the full operation lasted. The time will be displayed with millisecond resolution.）  
  
time\_namelookup DNS解析时间,从请求开始到DNS解析完毕所用时间。(The time, in seconds, it took from the start until the name resolving was completed.)  
  
time\_connect 连接时间,从开始到建立TCP连接完成所用时间,包括前边DNS解析时间，如果需要单纯的得到连接时间，用这个time\_connect时间减去前边 time\_namelookup时间。以下同理，不再赘述。(The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed.)  
  
time\_appconnect 连接建立完成时间，如SSL/SSH等建立连接或者完成三次握手时间。(The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was completed. (Added in 7.19.0))  
  
time\_pretransfer 从开始到准备传输的时间。(The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved.)  
  
time\_redirect 重定向时间，包括到最后一次传输前的几次重定向的DNS解析，连接，预传输，传输时间。(The time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before the final transaction was started. time\_redirect shows the complete execution time for multiple redirections. (Added in 7.12.3))  
  
time\_starttransfer 开始传输时间。在发出请求之后，Web 服务器返回数据的第一个字节所用的时间(The time, in seconds, it took from the start until the first byte was just about to be transferred. This includes time\_pretransfer and also the time the server needed to calculate the result.)  
  
size\_download 下载大小。(The total amount of bytes that were downloaded.)  
  
size\_upload 上传大小。(The total amount of bytes that were uploaded.)  
  
size\_header 下载的header的大小(The total amount of bytes of the downloaded headers.)  
  
size\_request 请求的大小。(The total amount of bytes that were sent in the HTTP request.)  
  
speed\_download 下载速度，单位-字节每秒。(The average download speed that curl measured for the complete download. Bytes per second.)  
  
speed\_upload 上传速度,单位-字节每秒。(The average upload speed that curl measured for the complete upload. Bytes per second.)  
  
content\_type 就是content-Type，不用多说了，这是一个访问我博客首页返回的结果示例(text/html; charset=UTF-8)；(The Content-Type of the requested document, if there was any.)  
  
num\_connects Number of new connects made in the recent transfer. (Added in 7.12.3)  
  
num\_redirects Number of redirects that were followed in the request. (Added in 7.12.3)  
  
redirect\_url When a HTTP request was made without -L to follow redirects, this variable will show the actual URL a redirect would take you to. (Added in 7.18.2)  
  
ftp\_entry\_path The initial path libcurl ended up in when logging on to the remote FTP server. (Added in 7.15.4)  
  
ssl\_verify\_result ssl认证结果，返回0表示认证成功。( The result of the SSL peer certificate verification that was requested. 0 means the verification was successful. (Added in 7.19.0))  
  
若多次使用-w参数，按最后一个的格式输出。If this option is used several times, the last one will be used.

[06fe54f623196e680c4874e0be560369.png]: /images/20221123/a28b4a4908264947986f94ea0836f10b.png
[2890095b9d31e4a1d2e5747b0a505b9a.png]: /images/20221123/17f879139f294cdbbd2c1e4e2a249432.png