simpy模拟数据包发送

以你之姓@ 2022-12-02 13:38 155阅读 0赞

来源：https://www.grotto-networking.com/DiscreteEventPython.html\#DistNet

""" A bit more detailed set of components to use in packet switching queueing experiments. Copyright 2014 Greg M. Bernstein Released under the MIT license """
    import simpy
    import random
    import copy
    from simpy.core import BoundClass
    from simpy.resources import base
    from heapq import heappush, heappop
    
    
    class Packet(object):
        """ A very simple class that represents a packet. This packet will run through a queue at a switch output port. We use a float to represent the size of the packet in bytes so that we can compare to ideal M/M/1 queues. Parameters ---------- time : float the time the packet arrives at the output queue. size : float the size of the packet in bytes id : int an identifier for the packet src, dst : int identifiers for source and destination flow_id : int small integer that can be used to identify a flow """
        def __init__(self, time, size, id, src="a", dst="z", flow_id=0):
            self.time = time
            self.size = size
            self.id = id
            self.src = src
            self.dst = dst
            self.flow_id = flow_id
    
        def __repr__(self):
            return "id: {}, src: {}, time: {}, size: {}".\
                format(self.id, self.src, self.time, self.size)
    
    
    class PacketGenerator(object):
        """ Generates packets with given inter-arrival time distribution. Set the "out" member variable to the entity to receive the packet. Parameters ---------- env : simpy.Environment the simulation environment adist : function a no parameter function that returns the successive inter-arrival times of the packets sdist : function a no parameter function that returns the successive sizes of the packets initial_delay : number Starts generation after an initial delay. Default = 0 finish : number Stops generation at the finish time. Default is infinite """
        def __init__(self, env, id,  adist, sdist, initial_delay=0, finish=float("inf"), flow_id=0):
            self.id = id
            self.env = env
            self.adist = adist
            self.sdist = sdist
            self.initial_delay = initial_delay
            self.finish = finish
            self.out = None
            self.packets_sent = 0
            self.action = env.process(self.run())  # starts the run() method as a SimPy process
            self.flow_id = flow_id
    
        def run(self):
            """The generator function used in simulations. """
            yield self.env.timeout(self.initial_delay)
            while self.env.now < self.finish:
                # wait for next transmission
                yield self.env.timeout(self.adist())
                self.packets_sent += 1
                p = Packet(self.env.now, self.sdist(), self.packets_sent, src=self.id, flow_id=self.flow_id)
                self.out.put(p)
    
    
    class PacketSink(object):
        """ Receives packets and collects delay information into the waits list. You can then use this list to look at delay statistics. Parameters ---------- env : simpy.Environment the simulation environment debug : boolean if true then the contents of each packet will be printed as it is received. rec_arrivals : boolean if true then arrivals will be recorded absolute_arrivals : boolean if true absolute arrival times will be recorded, otherwise the time between consecutive arrivals is recorded. rec_waits : boolean if true waiting time experienced by each packet is recorded selector: a function that takes a packet and returns a boolean used for selective statistics. Default none. """
        def __init__(self, env, rec_arrivals=False, absolute_arrivals=False, rec_waits=True, debug=False, selector=None):
            self.store = simpy.Store(env)
            self.env = env
            self.rec_waits = rec_waits
            self.rec_arrivals = rec_arrivals
            self.absolute_arrivals = absolute_arrivals
            self.waits = []
            self.arrivals = []
            self.debug = debug
            self.packets_rec = 0
            self.bytes_rec = 0
            self.selector = selector
            self.last_arrival = 0.0
    
        def put(self, pkt):
            if not self.selector or self.selector(pkt):
                now = self.env.now
                if self.rec_waits:
                    self.waits.append(self.env.now - pkt.time)
                if self.rec_arrivals:
                    if self.absolute_arrivals:
                        self.arrivals.append(now)
                    else:
                        self.arrivals.append(now - self.last_arrival)
                    self.last_arrival = now
                self.packets_rec += 1
                self.bytes_rec += pkt.size
                if self.debug:
                    print(pkt)
    
    
    class SwitchPort(object):
        """ Models a switch output port with a given rate and buffer size limit in bytes. Set the "out" member variable to the entity to receive the packet. Parameters ---------- env : simpy.Environment the simulation environment rate : float the bit rate of the port qlimit : integer (or None) a buffer size limit in bytes or packets for the queue (including items in service). limit_bytes : If true, the queue limit will be based on bytes if false the queue limit will be based on packets. """
        def __init__(self, env, rate, qlimit=None, limit_bytes=True, debug=False):
            self.store = simpy.Store(env)
            self.rate = rate
            self.env = env
            self.out = None
            self.packets_rec = 0
            self.packets_drop = 0
            self.qlimit = qlimit
            self.limit_bytes = limit_bytes
            self.byte_size = 0  # Current size of the queue in bytes
            self.debug = debug
            self.busy = 0  # Used to track if a packet is currently being sent
            self.action = env.process(self.run())  # starts the run() method as a SimPy process
    
        def run(self):
            while True:
                msg = (yield self.store.get())
                self.busy = 1
                self.byte_size -= msg.size
                yield self.env.timeout(msg.size*8.0/self.rate)
                self.out.put(msg)
                self.busy = 0
                if self.debug:
                    print(msg)
    
        def put(self, pkt):
            self.packets_rec += 1
            tmp_byte_count = self.byte_size + pkt.size
    
            if self.qlimit is None:
                self.byte_size = tmp_byte_count
                return self.store.put(pkt)
            if self.limit_bytes and tmp_byte_count >= self.qlimit:
                self.packets_drop += 1
                return
            elif not self.limit_bytes and len(self.store.items) >= self.qlimit-1:
                self.packets_drop += 1
            else:
                self.byte_size = tmp_byte_count
                return self.store.put(pkt)
    
    
    class PortMonitor(object):
        """ A monitor for an SwitchPort. Looks at the number of items in the SwitchPort in service + in the queue and records that info in the sizes[] list. The monitor looks at the port at time intervals given by the distribution dist. Parameters ---------- env : simpy.Environment the simulation environment port : SwitchPort the switch port object to be monitored. dist : function a no parameter function that returns the successive inter-arrival times of the packets """
        def __init__(self, env, port, dist, count_bytes=False):
            self.port = port
            self.env = env
            self.dist = dist
            self.count_bytes = count_bytes
            self.sizes = []
            self.action = env.process(self.run())
    
        def run(self):
            while True:
                yield self.env.timeout(self.dist())
                if self.count_bytes:
                    total = self.port.byte_size
                else:
                    total = len(self.port.store.items) + self.port.busy
                self.sizes.append(total)
    
    
    class RandomBrancher(object):
        """ A demultiplexing element that chooses the output port at random. Contains a list of output ports of the same length as the probability list in the constructor. Use these to connect to other network elements. Parameters ---------- env : simpy.Environment the simulation environment probs : List list of probabilities for the corresponding output ports """
        def __init__(self, env, probs):
            self.env = env
    
            self.probs = probs
            self.ranges = [sum(probs[0:n+1]) for n in range(len(probs))]  # Partial sums of probs
            if self.ranges[-1] - 1.0 > 1.0e-6:
                raise Exception("Probabilities must sum to 1.0")
            self.n_ports = len(self.probs)
            self.outs = [None for i in range(self.n_ports)]  # Create and initialize output ports
            self.packets_rec = 0
    
        def put(self, pkt):
            self.packets_rec += 1
            rand = random.random()
            for i in range(self.n_ports):
                if rand < self.ranges[i]:
                    if self.outs[i]:  # A check to make sure the output has been assigned before we put to it
                        self.outs[i].put(pkt)
                    return
    
    
    class FlowDemux(object):
            """ A demultiplexing element that splits packet streams by flow_id. Contains a list of output ports of the same length as the probability list in the constructor. Use these to connect to other network elements. Parameters ---------- outs : List list of probabilities for the corresponding output ports """
            def __init__(self, outs=None, default=None):
                self.outs = outs
                self.default = default
                self.packets_rec = 0
    
            def put(self, pkt):
                self.packets_rec += 1
                flow_id = pkt.flow_id
                if flow_id < len(self.outs):
                    self.outs[flow_id].put(pkt)
                else:
                    if self.default:
                        self.default.put(pkt)
    
    class TrTCM(object):
        """ A Two rate three color marker. Uses the flow_id packet field to mark the packet with green = 0, yellow = 1, red = 2. Parameters ---------- env : the SimPy environment (so we can get the simulated time) pir : Peak Information Rate in units of bits (slighly different from RFC) pbs : Peak Burst Size in units of bytes cir : Committed Information Rate in units of bits (time part maybe scaled) cbs : Committed Burst Size in bytes """
        def __init__(self, env, pir, pbs, cir, cbs):
            self.env = env
            self.out = None
            self.pir = pir
            self.pbs = pbs
            self.cir = cir
            self.cbs = cbs
            self.pbucket = pbs
            self.cbucket = cbs
            self.last_time = 0.0  # Last time we updated buckets
    
        def put(self, pkt):
            time_inc = self.env.now - self.last_time
            self.last_time = self.env.now
            # Add bytes to the buckets
            self.pbucket += self.pir*time_inc/8.0  # rate in bits, bucket in bytes
            if self.pbucket > self.pbs:
                self.pbucket = self.pbs
            self.cbucket += self.cir*time_inc/8.0  # rate in bits, bucket in bytes
            if self.cbucket > self.cbs:
                self.cbucket = self.cbs
            # Check marking criteria and mark
            if self.pbucket - pkt.size < 0:
                pkt.flow_id = 2  # Red packet
            elif self.cbucket - pkt.size < 0:
                pkt.flow_id = 1  # Yellow packet
                self.pbucket -= pkt.size
            else:
                pkt.flow_id = 0  # Green packet
                self.pbucket -= pkt.size
                self.cbucket -= pkt.size
            # Send marked packet on its way
            self.out.put(pkt)
    
    class SnoopSplitter(object):
        """ A snoop port like splitter. Sends the original packet out port 1 and sends a copy of the packet out port 2. You need to set the values of out1 and out2. """
        def __init__(self):
            self.out1 = None
            self.out2 = None
    
        def put(self, pkt):
            pkt2 = copy.copy(pkt)
            if self.out1:
                self.out1.put(pkt)
            if self.out2:
                self.out2.put(pkt2)
    
    """ Trying to implement a stamped/ordered version of the Simpy Store class. The "stamp" is used to sort the elements for removal ordering. This can be used in the implementation of sophisticated queueing disciplines, but would be overkill for fixed priority schemes. Copyright 2014 Greg M. Bernstein Released under the MIT license """
    
    
    class StampedStorePut(base.Put):
        """ Put *item* into the store if possible or wait until it is. The item must be a tuple (stamp, contents) where the stamp is used to sort the content in the StampedStore. """
        def __init__(self, resource, item):
            self.item = item
            """The item to put into the store."""
            super(StampedStorePut, self).__init__(resource)
    
    
    class StampedStoreGet(base.Get):
        """Get an item from the store or wait until one is available."""
        pass
    
    
    class StampedStore(base.BaseResource):
        """Models the production and consumption of concrete Python objects. Items put into the store can be of any type. By default, they are put and retrieved from the store in a first-in first-out order. The *env* parameter is the :class:`~simpy.core.Environment` instance the container is bound to. The *capacity* defines the size of the Store and must be a positive number (> 0). By default, a Store is of unlimited size. A :exc:`ValueError` is raised if the value is negative. """
        def __init__(self, env, capacity=float('inf')):
            super(StampedStore, self).__init__(env, capacity=float('inf'))
            if capacity <= 0:
                raise ValueError('"capacity" must be > 0.')
            self._capacity = capacity
            self.items = []  # we are keeping items sorted by stamp
            self.event_count = 0 # Used to break ties with python heap implementation
            # See: https://docs.python.org/3/library/heapq.html?highlight=heappush#priority-queue-implementation-notes
            """List of the items within the store."""
    
        @property
        def capacity(self):
            """The maximum capacity of the store."""
            return self._capacity
    
        put = BoundClass(StampedStorePut)
        """Create a new :class:`StorePut` event."""
    
        get = BoundClass(StampedStoreGet)
        """Create a new :class:`StoreGet` event."""
    
        # We assume the item is a tuple: (stamp, packet). The stamp is used to
        # sort the packet in the heap.
        def _do_put(self, event):
            self.event_count += 1 # Needed this to break heap ties
            if len(self.items) < self._capacity:
                heappush(self.items, [event.item[0], self.event_count, event.item[1]])
                event.succeed()
    
        # When we return an item from the stamped store we do not
        # return the stamp but only the content portion.
        def _do_get(self, event):
            if self.items:
                event.succeed(heappop(self.items)[2])
    
    """ A Set of components to enable simulation of various networking QoS scenarios. Copyright 2014 Dr. Greg Bernstein Released under the MIT license """
    
    
    class ShaperTokenBucket(object):
        """ Models an ideal token bucket shaper. Note the token bucket size should be greater than the size of the largest packet that can occur on input. If this is not the case we always accumulate enough tokens to let the current packet pass based on the average rate. This may not be the behavior you desire. Parameters ---------- env : simpy.Environment the simulation environment rate : float the token arrival rate in bits b_size : Number a token bucket size in bytes peak : Number or None for infinite peak the peak sending rate of the buffer (quickest time two packets could be sent) """
        def __init__(self, env, rate, b_size, peak=None, debug=False):
            self.store = simpy.Store(env)
            self.rate = rate
            self.env = env
            self.out = None
            self.packets_rec = 0
            self.packets_sent = 0
            self.b_size = b_size
            self.peak = peak
    
            self.current_bucket = b_size  # Current size of the bucket in bytes
            self.update_time = 0.0  # Last time the bucket was updated
            self.debug = debug
            self.busy = 0  # Used to track if a packet is currently being sent ?
            self.action = env.process(self.run())  # starts the run() method as a SimPy process
    
        def run(self):
            while True:
                msg = (yield self.store.get())
                now = self.env.now
                # Add tokens to bucket based on current time
                self.current_bucket = min(self.b_size, self.current_bucket + self.rate*(now-self.update_time)/8.0)
                self.update_time = now
                # Check if there are enough tokens to allow packet to be sent
                # If not we will wait to accumulate enough tokens to let this packet pass
                # regardless of the bucket size.
                if msg.size > self.current_bucket:  # Need to wait for bucket to fill before sending
                    yield self.env.timeout((msg.size - self.current_bucket)*8.0/self.rate)
                    self.current_bucket = 0.0
                    self.update_time = self.env.now
                else:
                    self.current_bucket -= msg.size
                    self.update_time = self.env.now
                # Send packet
                if not self.peak:  # Infinite peak rate
                    self.out.put(msg)
                else:
                    yield self.env.timeout(msg.size*8.0/self.peak)
                    self.out.put(msg)
                self.packets_sent += 1
                if self.debug:
                    print(msg)
    
        def put(self, pkt):
            self.packets_rec += 1
            return self.store.put(pkt)
    
    
    class VirtualClockServer(object):
        """ Models a virtual clock server. For theory and implementation see: L. Zhang, Virtual clock: A new traffic control algorithm for packet switching networks, in ACM SIGCOMM Computer Communication Review, 1990, vol. 20, pp. 19. Parameters ---------- env : simpy.Environment the simulation environment rate : float the bit rate of the port vticks : A list list of the vtick parameters (for each possible packet flow_id). We assume a simple assignment of flow id to vticks, i.e., flow_id = 0 corresponds to vticks[0], etc... We assume that the vticks are the inverse of the desired rates for the flows in bits per second. """
        def __init__(self, env, rate, vticks, debug=False):
            self.env = env
            self.rate = rate
            self.vticks = vticks
            self.auxVCs = [0.0 for i in range(len(vticks))]  # Initialize all the auxVC variables
            self.out = None
            self.packets_rec = 0
            self.packets_drop = 0
            self.debug = debug
            self.store = StampedStore(env)
            self.action = env.process(self.run())  # starts the run() method as a SimPy process
    
        def run(self):
            while True:
                msg = (yield self.store.get())
                # Send message
                yield self.env.timeout(msg.size*8.0/self.rate)
                self.out.put(msg)
    
        def put(self, pkt):
            self.packets_rec += 1
            now = self.env.now
            flow_id = pkt.flow_id
            # Update of auxVC for the flow. We assume that vticks is the desired bit time
            # i.e., the inverse of the desired bits per second data rate.
            # Hence we then multiply this value by the size of the packet in bits.
            self.auxVCs[flow_id] = max(now, self.auxVCs[flow_id]) + self.vticks[flow_id]*pkt.size*8.0
            # Lots of work to do here to implement the queueing discipline
            return self.store.put((self.auxVCs[flow_id], pkt))
    
    
    class WFQServer(object):
        """ Models a WFQ/PGPS server. For theory and implementation see: Parameters ---------- env : simpy.Environment the simulation environment rate : float the bit rate of the port phis : A list list of the phis parameters (for each possible packet flow_id). We assume a simple assignment of flow id to phis, i.e., flow_id = 0 corresponds to phis[0], etc... """
        def __init__(self, env, rate, phis, debug=False):
            self.env = env
            self.rate = rate
            self.phis = phis
            self.F_times = [0.0 for i in range(len(phis))]  # Initialize all the finish time variables
            # We keep track of the number of packets from each flow in the queue
            self.flow_queue_count = [0 for i in range(len(phis))]
            self.active_set = set()
            self.vtime = 0.0
            self.out = None
            self.packets_rec = 0
            self.packets_drop = 0
            self.debug = debug
            self.store = StampedStore(env)
            self.action = env.process(self.run())  # starts the run() method as a SimPy process
            self.last_update = 0.0
    
        def run(self):
            while True:
                msg = (yield self.store.get())
                self.last_update = self.env.now
                flow_id = msg.flow_id
                # update information about flow items in queue
                self.flow_queue_count[flow_id] -= 1
                if self.flow_queue_count[flow_id] == 0:
                    self.active_set.remove(flow_id)
                # If end of busy period, reset virtual time and reinitialize finish times.
                if len(self.active_set) == 0:
                    self.vtime = 0.0
                    for i in range(len(self.F_times)):
                        self.F_times[i] = 0.0
                # Send message
                yield self.env.timeout(msg.size*8.0/self.rate)
                self.out.put(msg)
    
        def put(self, pkt):
            self.packets_rec += 1
            now = self.env.now
            flow_id = pkt.flow_id
            self.flow_queue_count[flow_id] += 1
            self.active_set.add(flow_id)
            phi_sum = 0.0
            for i in self.active_set:
                phi_sum += self.phis[i]
            self.vtime += (now-self.last_update)/phi_sum
            self.F_times[flow_id] = max(self.F_times[flow_id], self.vtime) + pkt.size*8.0/self.phis[flow_id]
            # print "Flow id = {}, packet_id = {}, F_time = {}".format(flow_id, pkt.id, self.F_times[flow_id])
            self.last_update = now
            return self.store.put((self.F_times[flow_id], pkt))