VxWorks博客文章（摘录）

港控/mmm° 2022-11-15 05:50 287阅读 0赞

[VxWorks][]基础知识

# [VxWorks是啥？][VxWorks 1] #

# [关于实时][Link 1] #

# [关于硬实时][Link 2] #

# [BSP是啥][BSP] #

# [Task是啥？][Task] #

# [RTP是啥？][RTP] #

# [RTP之启动][RTP 1] #

# [Utility之APP自启动][Utility_APP] #

# [Component之Kernel Shell的命令][Component_Kernel Shell] #

# [Boot之bootrom启动顺序][Boot_bootrom] #

<table> 
 <tbody> 
 <tr> 
 <td> &nbsp;&nbsp;&nbsp;加载vxWorks的boot loader有很多种，最常见的就是使用BSP编译的bootrom <img alt="" src="https://img-blog.csdnimg.cn/img_convert/e0ce65b3b9c7e571666cd71db282db31.png"> 它在Target里的执行顺序如下 
 <ul> 
 <li> romInit() -&nbsp;$(BSP)/romInit.s，这是bootrom的启动地址，它在ROM(例如Flash、硬盘)中执行最小的初始化，包括：初始化CPU、关中断、清Cache、初始化romStart()的栈STACK_SAVE、调用romStart() </li> 
 <li> romStart() - config/all/bootInit.c，这是bootrom的第一条C指令，它将bootrom镜像中未压缩的文本段与数据段从ROM复制到RAM的RAM_LOW_ADRS，然后将RAM中未占用的空间清零，将bootrom的剩余压缩部分解压到RAM的RAM_HIGH_ADRS，最后跳转到这个RAM_HIGH_ADRS处的usrEntry()执行 </li> 
 </ul><img alt="" src="https://img-blog.csdnimg.cn/img_convert/057191404cb9761cf1a776f5289dee14.png"> 
 <ul> 
 <li> usrEntry() - config/all/usrEntry.c，RAM中的第一条指令，它的唯一功能就是调用usrInit() </li> 
 <li> usrInit() - config/all/usrConfig.c，主要工作包括：将BSS清零、初始化Cache库、设置中断向量表基址、安装异常向量、调用sysHwInit()、使能Cache、调用usrKernelCorePreInit()初始化Class、对象、信号量等、初始化wdb、调用usrKernelInit() 
 <ul> 
 <li> usrKernelInit() - comps/src/usrKernel.c，配置内核使用的数据结构，包括初始化内核的Task库、配置调度策略、初始化Tick队列、初始化wind work队列、记录系统内存池尺寸、调用kernelInit()初始化内 </li> 
 <li> kernelInit() - src/wind/kernelLib.c，初始化并启动内核，包括设置中断栈尺寸、设置内存池位置、初始化中断lock-out等级、关闭时间片轮转策略、将系统Tick清零、初始化中断栈、初始化并启动第一个任务tRootTask </li> 
 </ul></li> 
 <li> usrRoot() - config/all/usrConfig.c，这就是系统第一个任务的入口地址，主要负责post-kernel的初始化，逐步加载系统服务，它内部同样由大量初始化函数组成 
 <ul> 
 <li> usrKernelCoreInit() - src/config/usrKernelCore.c，初始化内核的一些机制，包括Event、信号量的open机制、消息队列及open机制、看门狗、任务的open机制等 </li> 
 <li> memInit() - src/os/mm/memLib.c，初始化系统内存池 </li> 
 <li> usrMmuInit() - comps/src/usrMmuInit.c，初始化MMU </li> 
 <li> usrKernelCreateInit() - src/config/usrKernelCore.c，初始化内核对象的creation机制，例如任务、消息队列、看门狗 </li> 
 <li> sysClkConnect() - src/drv/timer/xxxTimer.c，挂接系统时钟ISR，调用sysHwInit2() </li> 
 <li> sysHwInit2() -&nbsp;$(BSP)/sysLib.c，挂接中断，配置其它附加信息 </li> 
 <li> iosInit() - src/os/io/iosLib.c，初始化IO系统 </li> 
 <li> tyLibInit() - src/os/io/tyLib.c，初始化TTY库 </li> 
 <li> ttyDrv() - src/os/io/ttyDrv.c，初始化TTY驱动 </li> 
 <li> ttyDevCreate - src/os/io/ttyDrv.c，创建TTY设备 </li> 
 <li> 初始化其它机制，例如任务级job机制、message logging库、管道驱动、标准IO库、ERF(Event Reporting Framework)库、设备管理、文件系统相关机制、pty(pseudo-terminal)驱动、存储设备加载、Boot Line解析等 </li> 
 <li> bootAppShellInit() - src/boot/bootAppShell.c，初始化<a href="https://www.oschina.net/action/GoToLink?url=http%3A%2F%2Fmp.weixin.qq.com%2Fs%3F__biz%3DMzU1NTIxMTI0MQ%3D%3D%26mid%3D2247484177%26idx%3D1%26sn%3Db3d662a083d8fb35c8ac40c57caab738%26chksm%3Dfbd68397cca10a81118af1212ca9ce3784df5b0d57d95907d265cd085c3ac85ae056d6828ec9%26scene%3D21%23wechat_redirect" rel="nofollow">Boot Shell</a> </li> 
 <li> Boot方式的初始化，例如文件系统、网络 </li> 
 <li> bootApp() - src/boot/bootApp.c，启动Boot Loader主任务bootApp </li> 
 </ul></li> 
 <li> bootAppTask() - src/boot/bootApp.c，bootApp的入口地址。它默认先等待7秒，如果Boot Shell接收到命令，则解析执行；如果7秒倒计时结束，则按照Boot Line将vxWorks镜像加载到RAM_LOW_ADRS，然后跳转到这个地址<a href="https://www.oschina.net/action/GoToLink?url=http%3A%2F%2Fmp.weixin.qq.com%2Fs%3F__biz%3DMzU1NTIxMTI0MQ%3D%3D%26mid%3D2247485010%26idx%3D1%26sn%3D42fb6186d4e621c37923ec65197d4839%26chksm%3Dfbd686d4cca10fc2d5611f202ef2ea940c401761095936ad8ab8f0ac7c9444f20e8d598e6859%26scene%3D21%23wechat_redirect" rel="nofollow">开始执行vxWorks</a> </li> 
 </ul><img alt="" src="https://img-blog.csdnimg.cn/img_convert/c54b474749bde11d4b38299e90f8ff6b.png"> </td> 
 </tr> 
 </tbody> 
</table>

# [Boot之VxWorks的镜像类型][Boot_VxWorks] #

# [Boot之vxWorks启动顺序][Boot_vxWorks] #

# [Tool之VIP][Tool_VIP] #

# [Tool之DKM][Tool_DKM] #

# [Tool之Debugger][Tool_Debugger] #

# [Vx7之VmWare][Vx7_VmWare] #

# [Vx7之VirtualBox][Vx7_VirtualBox] #

# [Component之netstat][Component_netstat] #

# [Component之抓包工具][Component] #

# [Component之Spy][Component_Spy] #

# [C语言之关键字static][C_static] #

# [UGL之HelloWorld][UGL_HelloWorld] #

# [UGL之绘制多边形][UGL] #

# [Net之UDP极简编程][Net_UDP] #

# [Net之TCP极简编程][Net_TCP] #

# [Net之MultiCast极简编程][Net_MultiCast] #

# [Net之SCTP极简编程][Net_SCTP] #

# [Net之TFTP][Net_TFTP] #

# [Net之NFS][Net_NFS] #

# [Task之消息队列][Task 1] #

# [Component之CMD的0x10x10个命令][Component_CMD_0x10x10] #

<table style="width:589px;"> 
 <tbody> 
 <tr> 
 <td>命令</td> 
 <td>简介</td> 
 </tr> 
 <tr> 
 <td>adrsp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on the address space.</td> 
 </tr> 
 <tr> 
 <td>alias&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Add an alias or &nbsp;display alias</td> 
 </tr> 
 <tr> 
 <td>arp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET arp control</td> 
 </tr> 
 <tr> 
 <td>bp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display, set or unset &nbsp;a breakpoint</td> 
 </tr> 
 <tr> 
 <td>C&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Switch to C &nbsp;interpreter</td> 
 </tr> 
 <tr> 
 <td>cd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Change current &nbsp;directory.</td> 
 </tr> 
 <tr> 
 <td>cpu&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set/Get CPU affinity</td> 
 </tr> 
 <tr> 
 <td>date&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Show/Set current date</td> 
 </tr> 
 <tr> 
 <td>demangle&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display demangled &nbsp;string</td> 
 </tr> 
 <tr> 
 <td>dprintf&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Insert a dynamic &nbsp;printf eventpoint</td> 
 </tr> 
 <tr> 
 <td>echo&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a line of &nbsp;text</td> 
 </tr> 
 <tr> 
 <td>echoclient&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>TCP/UDP echo client</td> 
 </tr> 
 <tr> 
 <td>echoserver&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>TCP/UDP echo server</td> 
 </tr> 
 <tr> 
 <td>edr clear&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Clear ED&amp;R log</td> 
 </tr> 
 <tr> 
 <td>edr show&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R log</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;boot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records caused by a boot</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;fatal&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display fatal records &nbsp;from the ED&amp;R log</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;records from the ED&amp;R log</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;init&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records caused by initialization</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;interrupt&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records caused by an interrupt</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;kernel&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records created at the kernel-level</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;reboot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records caused by a reboot</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;rtp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records created by the RTP system</td> 
 </tr> 
 <tr> 
 <td>edr show &nbsp;user&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display ED&amp;R &nbsp;records created at the user-level</td> 
 </tr> 
 <tr> 
 <td>exit&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Exit the shell &nbsp;session.</td> 
 </tr> 
 <tr> 
 <td>expr&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Evaluate expressions</td> 
 </tr> 
 <tr> 
 <td>file &nbsp;concat&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Concatenate and &nbsp;display files.</td> 
 </tr> 
 <tr> 
 <td>file copy&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Copy files and &nbsp;directories.</td> 
 </tr> 
 <tr> 
 <td>file &nbsp;create&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Create files or &nbsp;directories.</td> 
 </tr> 
 <tr> 
 <td>file list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>List the files in a &nbsp;directory.</td> 
 </tr> 
 <tr> 
 <td>file move&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Move (rename) files.</td> 
 </tr> 
 <tr> 
 <td>file &nbsp;remove&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Remove files or &nbsp;directories.</td> 
 </tr> 
 <tr> 
 <td>ftp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>FTP client</td> 
 </tr> 
 <tr> 
 <td>func call&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Call a given routine &nbsp;with parameters.</td> 
 </tr> 
 <tr> 
 <td>getenv&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Get an environment &nbsp;variable</td> 
 </tr> 
 <tr> 
 <td>history &nbsp;load&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Load an history file &nbsp;into the current shell session.</td> 
 </tr> 
 <tr> 
 <td>history &nbsp;save&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Save the current &nbsp;shell session history.</td> 
 </tr> 
 <tr> 
 <td>ifconfig&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET interface &nbsp;configuration</td> 
 </tr> 
 <tr> 
 <td>ipd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>ipd - Interpeak &nbsp;daemon control</td> 
 </tr> 
 <tr> 
 <td>ipversion&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Show interpeak &nbsp;product versions</td> 
 </tr> 
 <tr> 
 <td>logout&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Logout the shell &nbsp;session.</td> 
 </tr> 
 <tr> 
 <td>lookup&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Lookup a symbol</td> 
 </tr> 
 <tr> 
 <td>mem&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Memory debug tool</td> 
 </tr> 
 <tr> 
 <td>mem block &nbsp;list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on allocated blocks.</td> 
 </tr> 
 <tr> 
 <td>mem block &nbsp;mark&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Mark allocated &nbsp;blocks.</td> 
 </tr> 
 <tr> 
 <td>mem block &nbsp;unmark&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Unmark allocated &nbsp;blocks.</td> 
 </tr> 
 <tr> 
 <td>mem dump&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display memory</td> 
 </tr> 
 <tr> 
 <td>mem info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display memory &nbsp;information</td> 
 </tr> 
 <tr> 
 <td>mem list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Disassemble and &nbsp;display a specified number of instructions</td> 
 </tr> 
 <tr> 
 <td>mem &nbsp;modify&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Modify memory values</td> 
 </tr> 
 <tr> 
 <td>mem part &nbsp;list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on memory partition instrumentation.</td> 
 </tr> 
 <tr> 
 <td>mem queue &nbsp;flush&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Flush the free queue.</td> 
 </tr> 
 <tr> 
 <td>mem rtp block &nbsp;list&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on allocated blocks.</td> 
 </tr> 
 <tr> 
 <td>mem rtp block &nbsp;mark&nbsp;&nbsp;</td> 
 <td>Mark allocated &nbsp;blocks.</td> 
 </tr> 
 <tr> 
 <td>mem rtp block &nbsp;unmark</td> 
 <td>Unmark allocated &nbsp;blocks.</td> 
 </tr> 
 <tr> 
 <td>mem rtp part &nbsp;list&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on memory partition instrumentation.</td> 
 </tr> 
 <tr> 
 <td>mib2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Print MIB-2 &nbsp;statistics</td> 
 </tr> 
 <tr> 
 <td>mmap list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on memory mapped objects.</td> 
 </tr> 
 <tr> 
 <td>module&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the current &nbsp;status for all the loaded modules</td> 
 </tr> 
 <tr> 
 <td>module &nbsp;info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display complete &nbsp;information for a loaded module</td> 
 </tr> 
 <tr> 
 <td>module &nbsp;load&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Load an object module &nbsp;into kernel memory</td> 
 </tr> 
 <tr> 
 <td>module &nbsp;unload&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Unload an object &nbsp;module from kernel memory</td> 
 </tr> 
 <tr> 
 <td>more&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Browse and page &nbsp;through a text file.</td> 
 </tr> 
 <tr> 
 <td>netstat&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET socket and &nbsp;route stats</td> 
 </tr> 
 <tr> 
 <td>nslookup&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Query Internet name &nbsp;servers interactively</td> 
 </tr> 
 <tr> 
 <td>object &nbsp;handle&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the object Id &nbsp;for an object handle.</td> 
 </tr> 
 <tr> 
 <td>object &nbsp;info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on specified objects.</td> 
 </tr> 
 <tr> 
 <td>pcap&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Packet capture &nbsp;utility</td> 
 </tr> 
 <tr> 
 <td>ping&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET ping utility</td> 
 </tr> 
 <tr> 
 <td>pppconfig&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>ppp config</td> 
 </tr> 
 <tr> 
 <td>print &nbsp;errno&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Print a errno value</td> 
 </tr> 
 <tr> 
 <td>printf&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Write formatted &nbsp;output</td> 
 </tr> 
 <tr> 
 <td>pwd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display current &nbsp;working directory.</td> 
 </tr> 
 <tr> 
 <td>qc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET output queue &nbsp;configuration</td> 
 </tr> 
 <tr> 
 <td>qos&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET Quality of &nbsp;Service configuration</td> 
 </tr> 
 <tr> 
 <td>reboot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Reboot the system</td> 
 </tr> 
 <tr> 
 <td>repeat&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Repeat a command</td> 
 </tr> 
 <tr> 
 <td>ripctrl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>RIP daemon control</td> 
 </tr> 
 <tr> 
 <td>route&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET route table &nbsp;control</td> 
 </tr> 
 <tr> 
 <td>rtp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display process list.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;attach&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Attach the shell &nbsp;session to a process.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;background&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Run the current or &nbsp;specified process in the shell background.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;continue&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Continue a process.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;delete&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Delete a process.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;detach&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Detach the shell &nbsp;session from a process</td> 
 </tr> 
 <tr> 
 <td>rtp exec&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Execute a process.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;foreground&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Bring the current or &nbsp;specified process into the shell foreground.</td> 
 </tr> 
 <tr> 
 <td>rtp hooks&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the list of &nbsp;RTP hooks in the system.</td> 
 </tr> 
 <tr> 
 <td>rtp info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display process &nbsp;information.</td> 
 </tr> 
 <tr> 
 <td>rtp list&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the list of &nbsp;RTPs in the system.</td> 
 </tr> 
 <tr> 
 <td>rtp &nbsp;meminfo&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display memory &nbsp;information for a process.</td> 
 </tr> 
 <tr> 
 <td>rtp shl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the list of &nbsp;shared libraries in the process.</td> 
 </tr> 
 <tr> 
 <td>rtp stop&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Stop a RTP.</td> 
 </tr> 
 <tr> 
 <td>rtp symbols &nbsp;add&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Add symbols to a RTP &nbsp;symbol table</td> 
 </tr> 
 <tr> 
 <td>rtp symbols &nbsp;override</td> 
 <td>Overrides RTP symbol &nbsp;registration policy</td> 
 </tr> 
 <tr> 
 <td>rtp symbols &nbsp;remove&nbsp;&nbsp;</td> 
 <td>Removes symbols from &nbsp;a RTP symbol table</td> 
 </tr> 
 <tr> 
 <td>rtp task&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a process &nbsp;task list.</td> 
 </tr> 
 <tr> 
 <td>sd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on shared data regions.</td> 
 </tr> 
 <tr> 
 <td>sd info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display detail &nbsp;information on shared data regions.</td> 
 </tr> 
 <tr> 
 <td>set&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set the value of a &nbsp;symbol&nbsp;</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;bootline&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Change the boot line</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;config&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set or display shell &nbsp;configuration variables</td> 
 </tr> 
 <tr> 
 <td>set cwc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set the current &nbsp;working context of the shell session</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;deploy&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set or display the &nbsp;system debug flag.</td> 
 </tr> 
 <tr> 
 <td>set env&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set or display shell &nbsp;environment variables</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;history&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set the size of shell &nbsp;history.</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;prompt&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set the shell session &nbsp;prompt</td> 
 </tr> 
 <tr> 
 <td>set &nbsp;symbol&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set the value of a &nbsp;symbol</td> 
 </tr> 
 <tr> 
 <td>setenv&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set an environment &nbsp;variable</td> 
 </tr> 
 <tr> 
 <td>shl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on shared libraries.</td> 
 </tr> 
 <tr> 
 <td>shl info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display detail &nbsp;information on an SHL.</td> 
 </tr> 
 <tr> 
 <td>show &nbsp;bootline&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the boot line</td> 
 </tr> 
 <tr> 
 <td>show &nbsp;devices&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display all &nbsp;subsystem-known devices.</td> 
 </tr> 
 <tr> 
 <td>show &nbsp;drivers&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a list of &nbsp;system drivers</td> 
 </tr> 
 <tr> 
 <td>show fds&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a list of &nbsp;file descriptor names in the system.</td> 
 </tr> 
 <tr> 
 <td>show &nbsp;history&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the shell &nbsp;history events.</td> 
 </tr> 
 <tr> 
 <td>show &nbsp;lasterror&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the last &nbsp;error value of a command.</td> 
 </tr> 
 <tr> 
 <td>slab&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Print slab cache &nbsp;information</td> 
 </tr> 
 <tr> 
 <td>sleep&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Suspend execution for &nbsp;an interval.</td> 
 </tr> 
 <tr> 
 <td>sockperf&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Network performance &nbsp;test tool</td> 
 </tr> 
 <tr> 
 <td>socktest&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Socket API test tool</td> 
 </tr> 
 <tr> 
 <td>spy&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Begin periodic task &nbsp;activity reports.</td> 
 </tr> 
 <tr> 
 <td>spy &nbsp;clkstart&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Start collecting task &nbsp;activity data.</td> 
 </tr> 
 <tr> 
 <td>spy &nbsp;clkstop&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Stop collecting task &nbsp;activity data.</td> 
 </tr> 
 <tr> 
 <td>spy &nbsp;report&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display task activity &nbsp;data.</td> 
 </tr> 
 <tr> 
 <td>spy stop&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Stop spying and &nbsp;reporting.</td> 
 </tr> 
 <tr> 
 <td>string &nbsp;free&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Free a string &nbsp;allocated within the kernel shell</td> 
 </tr> 
 <tr> 
 <td>syscall &nbsp;hooks&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display the list &nbsp;system call hooks.</td> 
 </tr> 
 <tr> 
 <td>syscall &nbsp;monitor&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Turn on system call &nbsp;monitor for all system calls.</td> 
 </tr> 
 <tr> 
 <td>syscalls&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display system call &nbsp;group information in the system.</td> 
 </tr> 
 <tr> 
 <td>sysctl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>IPNET sysctl &nbsp;configuration</td> 
 </tr> 
 <tr> 
 <td>syslog&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>syslog</td> 
 </tr> 
 <tr> 
 <td>sysvar&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>System variable tool</td> 
 </tr> 
 <tr> 
 <td>task&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a summary of &nbsp;each task's TCB</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;continue&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Continue from a &nbsp;breakpoint</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;default&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set or display the &nbsp;default task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;delete&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Delete a task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;hooks&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display task hook &nbsp;functions</td> 
 </tr> 
 <tr> 
 <td>task info&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display complete &nbsp;information from a task's TCB</td> 
 </tr> 
 <tr> 
 <td>task regs&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Set task register &nbsp;value</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;resume&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Resume a task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;spawn&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Spawn a kernel or an &nbsp;RTP task with default parameters</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;stack&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a summary of &nbsp;each task's stack usage</td> 
 </tr> 
 <tr> 
 <td>task step&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Single-step a task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;stepover&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Single-step, but step &nbsp;over a subroutine</td> 
 </tr> 
 <tr> 
 <td>task stop&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Stop a task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;suspend&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Suspend a task</td> 
 </tr> 
 <tr> 
 <td>task &nbsp;trace&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display a stack trace &nbsp;of a task</td> 
 </tr> 
 <tr> 
 <td>task wait&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display info about &nbsp;the object a task is pending on</td> 
 </tr> 
 <tr> 
 <td>time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Show/Set current time</td> 
 </tr> 
 <tr> 
 <td>tip&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Connect to one or &nbsp;several remote systems over serial lines.</td> 
 </tr> 
 <tr> 
 <td>traceroute&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Trace route command &nbsp;for IPv4</td> 
 </tr> 
 <tr> 
 <td>ttcp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>ttcp - standard &nbsp;performance test</td> 
 </tr> 
 <tr> 
 <td>ttcp1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>ttcp - min priority</td> 
 </tr> 
 <tr> 
 <td>ttcp7&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>ttcp - max priority</td> 
 </tr> 
 <tr> 
 <td>unalias&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Remove an alias</td> 
 </tr> 
 <tr> 
 <td>unset &nbsp;config&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Remove a shell &nbsp;configuration variable</td> 
 </tr> 
 <tr> 
 <td>user&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>User admin command</td> 
 </tr> 
 <tr> 
 <td>version&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display VxWorks &nbsp;version information.</td> 
 </tr> 
 <tr> 
 <td>vm &nbsp;context&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> 
 <td>Display information &nbsp;on the virtual memory context.</td> 
 </tr> 
 </tbody> 
</table>

[VxWorks]: https://my.oschina.net/u/4470120/blog/4974044
[VxWorks 1]: https://my.oschina.net/u/4470120/blog/4366551
[Link 1]: https://my.oschina.net/u/4470120/blog/4366534
[Link 2]: https://my.oschina.net/u/4470120/blog/4366533
[BSP]: https://my.oschina.net/u/4470120/blog/4408441
[Task]: https://my.oschina.net/u/4470120/blog/4366553
[RTP]: https://my.oschina.net/u/4470120/blog/4366555
[RTP 1]: https://my.oschina.net/u/4470120/blog/4561738
[Utility_APP]: https://my.oschina.net/u/4470120/blog/4366295
[Component_Kernel Shell]: https://my.oschina.net/u/4470120/blog/4366476
[Boot_bootrom]: https://my.oschina.net/u/4470120/blog/4366347
[Boot_VxWorks]: https://my.oschina.net/u/4470120/blog/4366280
[Boot_vxWorks]: https://my.oschina.net/u/4470120/blog/4366278
[Tool_VIP]: https://my.oschina.net/u/4470120/blog/4366440
[Tool_DKM]: https://my.oschina.net/u/4470120/blog/4366431
[Tool_Debugger]: https://my.oschina.net/u/4470120/blog/4366390
[Vx7_VmWare]: https://my.oschina.net/u/4470120/blog/4366380
[Vx7_VirtualBox]: https://my.oschina.net/u/4470120/blog/4366375
[Component_netstat]: https://my.oschina.net/u/4470120/blog/4366369
[Component]: https://my.oschina.net/u/4470120/blog/4366366
[Component_Spy]: https://my.oschina.net/u/4470120/blog/4366357
[C_static]: https://my.oschina.net/u/4470120/blog/4366346
[UGL_HelloWorld]: https://my.oschina.net/u/4470120/blog/4366339
[UGL]: https://my.oschina.net/u/4470120/blog/4366314
[Net_UDP]: https://my.oschina.net/u/4470120/blog/4366334
[Net_TCP]: https://my.oschina.net/u/4470120/blog/4366333
[Net_MultiCast]: https://my.oschina.net/u/4470120/blog/4366331
[Net_SCTP]: https://my.oschina.net/u/4470120/blog/4366330
[Net_TFTP]: https://my.oschina.net/u/4470120/blog/4366292
[Net_NFS]: https://my.oschina.net/u/4470120/blog/4366293
[Task 1]: https://my.oschina.net/u/4470120/blog/4366323
[Component_CMD_0x10x10]: https://my.oschina.net/u/4470120/blog/4366244