USG6000 配置IPv4 PPPoE拨号

我不是女神ヾ 2022-11-10 05:26 357阅读 0赞

## 网络拓扑： ##

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70][]

## 组网需求： ##

FWA作为PPPoE Client，FWB作为PPPoE Server，FWA通过PPPoE方式从FWB获取IP地址，使PC1和PC2可以互相访问。其中，PPPoE Server采用PAP方式验证PPPoE Client，用户名为usera，密码为Password1，FWB为FWA分配的IP地址是10.2.0.2

### 操作步骤 ###

## 一、配置FWB（Server） ##

1、配置接口IP，并加入对应安全区域

<USG6000V1>system-view
    [USG6000V1]sysname FWB
    [FWB]interface  GigabitEthernet  1/0/3
    [FWB-GigabitEthernet1/0/3]ip address 10.4.0.1 24
    [FWB-GigabitEthernet1/0/3]quit
    
    [FWB]firewall zone untrust
    [FWB-zone-untrust]add  interface  GigabitEthernet  1/0/1
    [FWB-zone-untrust]quit
    [FWB]firewall zone  trust
    [FWB-zone-trust]add  interface  GigabitEthernet  1/0/3
    [FWB-zone-trust]quit

2、增加PPPoE用户

[FWB]user-manage user usera
    [FWB-localuser-usera]password Password1
    [FWB-localuser-usera]quit

3、配置地址池

[FWB]ip pool global1
    [FWB-ip-pool-global1]section 1 10.2.0.2
    [FWB-ip-pool-global1]quit

4、配置业务方案引用地址池

[FWB]aaa
    [FWB-aaa]service-scheme scheme1
    [FWB-aaa-service-scheme1]ip-pool global1
    [FWB-aaa-service-scheme1]quit

5、配置VT接口

[FWB]interface  Virtual-Template 1
    [FWB-Virtual-Template1]ppp authentication-mode pap
     The command is used to configure the PPP authentication mode on the local end. 
    Confirm that the peer end adopts the corresponding PPP authentication. Continue[
    Y/N]:y	
    [FWB-Virtual-Template1]ip address 10.2.0.1 24
    [FWB-Virtual-Template1]remote service-scheme scheme1
    [FWB-Virtual-Template1]quit
    	
    [FWB]firewall zone  untrust
    [FWB-zone-untrust]add  interface  Virtual-Template 1
    [FWB-zone-untrust]quit

6、绑定VT接口和物理接口

[FWB]interface  GigabitEthernet  1/0/1
    [FWB-GigabitEthernet1/0/1]pppoe-server bind virtual-template 1
    [FWB-GigabitEthernet1/0/1]quit

7、配置安全策略

[FWB]security-policy 
    [FWB-policy-security]rule name policy1	
    [FWB-policy-security-rule-policy1]source-zone trust
    [FWB-policy-security-rule-policy1]source-address 10.4.0.0 24
    [FWB-policy-security-rule-policy1]destination-zone  untrust	
    [FWB-policy-security-rule-policy1]destination-address 10.3.0.0 24
    [FWB-policy-security-rule-policy1]action permit
    [FWB-policy-security-rule-policy1]quit
    
    [FWB-policy-security]rule name policy2
    [FWB-policy-security-rule-policy2]source-zone  untrust
    [FWB-policy-security-rule-policy2]source-address 10.3.0.0 24
    [FWB-policy-security-rule-policy2]destination-zone  trust
    [FWB-policy-security-rule-policy2]destination-address 10.4.0.0 24
    [FWB-policy-security-rule-policy2]action permit 
    [FWB-policy-security-rule-policy2]quit

8、配置路由

[FWB]ip route-static 10.3.0.0 24 Virtual-Template 1 10.2.0.2

## 二、配置FWA（Client） ##

1、配置接口IP，并加入对应安全区域

<USG6000V1>system-view	
    [USG6000V1]sysname FWA
    [FWA]interface  GigabitEthernet  1/0/3
    [FWA-GigabitEthernet1/0/3]ip address  10.3.0.1 24	
    [FWA-GigabitEthernet1/0/3]quit
    
    [FWA]firewall zone  trust  
    [FWA-zone-trust]add  interface  GigabitEthernet  1/0/3
    [FWA-zone-trust]quit
    [FWA]firewall zone  untrust
    [FWA-zone-untrust]add  interface  GigabitEthernet  1/0/1
    [FWA-zone-untrust]quit

2、配置PPPoE拨号

[FWA]dialer-rule 1 ip permit
    [FWA]interface Dialer 1
    [FWA-Dialer1]dialer user usera
    [FWA-Dialer1]dialer-group 1
    [FWA-Dialer1]dialer bundle 1
    [FWA-Dialer1]ip address ppp-negotiate
    [FWA-Dialer1]ppp pap local-user usera password cipher Password1
    [FWA-Dialer1]quit
    
    [FWA]firewall zone  untrust	
    [FWA-zone-untrust]add  interface  Dialer 1
    [FWA-zone-untrust]quit

3、配置PPPoE会话

[FWA]interface  GigabitEthernet  1/0/1
    [FWA-GigabitEthernet1/0/1]pppoe-client dial-bundle-number 1 ipv4
    [FWA-GigabitEthernet1/0/1]quit

4、配置安全策略

[FWA]security-policy
    [FWA-policy-security]rule name policy1	
    [FWA-policy-security-rule-policy1]source-zone  trust
    [FWA-policy-security-rule-policy1]source-address  10.3.0.0 24
    [FWA-policy-security-rule-policy1]destination-zone  untrust	
    [FWA-policy-security-rule-policy1]destination-address 10.4.0.0 24
    [FWA-policy-security-rule-policy1]action permit
    [FWA-policy-security-rule-policy1]quit
    [FWA-policy-security]rule name policy2
    [FWA-policy-security-rule-policy2]source-zone  untrust
    [FWA-policy-security-rule-policy2]source-address 10.4.0.0 24
    [FWA-policy-security-rule-policy2]destination-zone  trust	
    [FWA-policy-security-rule-policy2]destination-address  10.3.0.0 24
    [FWA-policy-security-rule-policy2]action permit 
    [FWA-policy-security-rule-policy2]quit

5、配置路由

[FWA]ip route-static 10.4.0.0 24 Dialer  1

## 三、验证 ##

1、查看PPPoE Client 端

[FWA]display  pppoe-client session  summary dial-bundle-number 1
    PPPoE Client Session:
    ID   Bundle  Dialer  Intf             Client-MAC    Server-MAC    State
    1    1       1       GE1/0/1          00e0fc202870  00e0fc7f34a0  PPPUP

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70 1][]

2、查看PPPoE Server端

[FWB]display  pppoe-server session  all 
    SID Intf                      State OIntf          RemMAC         LocMAC
    1   Virtual-Template1:0       UP    GE1/0/1        00e0.fc20.2870 00e0.fc7f.34a0

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70 2][]

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70]: /images/20221023/f4e750dbed2c4fd3912b48e7b8ee3da1.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70 1]: /images/20221023/31266ef49a534b70a3c3eb1abbaf0879.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3RsYWRhZ2lv_size_16_color_FFFFFF_t_70 2]: /images/20221023/0390c8adc88c46c38c43a378c85c985a.png