【kali-2021.1】FPING—参数中文版（下）

今天药忘吃喽~ 2022-11-07 05:53 143阅读 0赞

### 目录 ###

*   *   *   *   *  12.设置数据包的服务类型（tos）
                 *  13.显示存活的主机
                 *  14.显示目标IP/IPv6地址
                 *  15.指定发送ping的次数，并显示详细信息
                 *  16.在输出结果之前打印时间戳
                 *  17.显示icmp数据包往返时间
                 *  18.显示主机名
                 *  19.安静模式
                 *  20.打印最终统计信息
                 *  21.显示不可达目标
                 *  22.显示fping版本
                 *  23.显示> = N个主机是否可访问
                 *  24.-N和-Q
                 *  25.显示累计中断时间
                 *  26.设置ping数据包到一个目标的时间间隔
                 *  27.设置源IP地址
                 *  28.危险参数
         *  参考文献

##### 12.设置数据包的服务类型（tos） #####

*  \-O, --tos=N 在ICMP数据包上设置服务类型（tos），N可以是十进制或十六进制（0xh）格式

下面是几个tos的报文抓取截图

┌──(kali㉿kali)-[~]
    └─$ fping -O 000 172.16.1.111 
    172.16.1.111 is alive

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center]

┌──(kali㉿kali)-[~]
    └─$ fping -O 001 172.16.1.111
    172.16.1.111 is alive

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 1]

┌──(kali㉿kali)-[~]
    └─$ fping -O 101 172.16.1.111
    172.16.1.111 is alive

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 2]

┌──(kali㉿kali)-[~]
    └─$ fping -O 111 172.16.1.111
    172.16.1.111 is alive

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 3]

##### 13.显示存活的主机 #####

*  \-a, --alive 显示存活的主机

┌──(kali㉿kali)-[~]
    └─$ fping  -g 172.16.1.101/28  -A -m -q -a                               
    172.16.1.102
    172.16.1.103
    172.16.1.104
    172.16.1.105
    172.16.1.106
    172.16.1.108
    172.16.1.109

##### 14.显示目标IP/IPv6地址 #####

*  \-A, --addr 显示目标地址

┌──(kali㉿kali)-[~]
    └─$ fping -m  -A www.baidu.com                                                         
    119.63.197.151 is alive
    119.63.197.139 is alive
    
    ┌──(kali㉿kali)-[~]
    └─$ fping -m  -A www.tencent.com                                                       
    150.109.206.154 is alive
    150.109.206.166 is alive
    
    ┌──(kali㉿kali)-[~]
    └─$ fping -m  -A www.google.com                                                       
    2404:6800:4004:800::2004: error while sending ping: Network is unreachable
    172.217.175.228 is alive
    2404:6800:4004:800::2004 is unreachable

##### 15.指定发送ping的次数，并显示详细信息 #####

*  \-C, --vcount=N 与-c相同，显示详细格式的结果

┌──(kali㉿kali)-[~]
    └─$ fping -m  -A -C 1 www.tencent.com                                                     
    150.109.206.154 : [0], 64 bytes, 56.5 ms (56.5 avg, 0% loss)
    150.109.206.166 : [0], 64 bytes, 57.1 ms (57.1 avg, 0% loss)
    
    150.109.206.154 : 56.5
    150.109.206.166 : 57.1

##### 16.在输出结果之前打印时间戳 #####

*  \-D, --timestamp 在每个输出行之前打印时间戳

假如单独使用-D选项，会报错

┌──(kali㉿kali)-[~]
    └─$ fping -C 2 www.tencent.com -D                                                     
    [1615385432.44362] www.tencent.com : [0], 64 bytes, 53.6 ms (53.6 avg, 0% loss)
    [1615385433.43608] www.tencent.com : [1], 64 bytes, 54.1 ms (53.8 avg, 0% loss)
    
    www.tencent.com : 53.6 54.1

##### 17.显示icmp数据包往返时间 #####

*  \-e, --elapsed 显示返回数据包经过的时间

┌──(kali㉿kali)-[~]
    └─$ fping  www.tencent.com -e                                                         
    www.tencent.com is alive (50.6 ms)

##### 18.显示主机名 #####

*  \-n, --name 显示目标主机名（与-d等效）

┌──(kali㉿kali)-[~]
    └─$ fping  -n 172.16.1.103                                                               
    laptop-ol7jdh0q.int.kcg.ac.jp is alive

##### 19.安静模式 #####

*  \-q, --quiet 安静模式（ 不显示每个ping结果，仅显示最终摘要, 也不显示ICMP错误消息）

┌──(kali㉿kali)-[~/桌面]
    └─$ fping 172.16.1.103                                                                 
    172.16.1.103 is alive
                                                                                                                 
    ┌──(kali㉿kali)-[~/桌面]
    └─$ fping 172.16.1.103 -q

##### 20.打印最终统计信息 #####

*  \-s, --stats 打印最终统计信息

┌──(kali㉿kali)-[~/桌面]
    └─$ fping 172.16.1.103 -s                                                             
    172.16.1.103 is alive
    
           1 targets
           1 alive
           0 unreachable
           0 unknown addresses
    
           0 timeouts (waiting for response)
           1 ICMP Echos sent
           1 ICMP Echo Replies received
           0 other ICMP received
    
     0.213 ms (min round trip time)
     0.213 ms (avg round trip time)
     0.213 ms (max round trip time)
            0.000 sec (elapsed real time)

##### 21.显示不可达目标 #####

*  \-u, --unreach 显示无法达到的目标

(-a和-u选项不能同时出现在一条命令中。下面的示例可以和-a的示例相比较)

┌──(kali㉿kali)-[~]
    └─$ fping  -g 172.16.1.101/28  -A -m -q -u                               
    172.16.1.97
    172.16.1.98
    172.16.1.99
    172.16.1.100
    172.16.1.101
    172.16.1.107
    172.16.1.110

##### 22.显示fping版本 #####

*  \-v, --version 显示fping版本

┌──(kali㉿kali)-[~/桌面]
    └─$ fping -v                                                                           
    fping: Version 5.0

##### 23.显示> = N个主机是否可访问 #####

*  \-x, --reachable=N 显示> = N个主机是否可访问

┌──(kali㉿kali)-[~/桌面]
    └─$ fping  -g 172.16.1.0/24  -A -m -q -a -x 22                                         
    172.16.1.2
    172.16.1.21
    172.16.1.22
    172.16.1.24
    172.16.1.28
    172.16.1.30
    172.16.1.31
    172.16.1.102
    172.16.1.103
    172.16.1.105
    172.16.1.106
    172.16.1.111
    172.16.1.112
    172.16.1.114
    172.16.1.117
    172.16.1.118
    172.16.1.120
    172.16.1.121
    172.16.1.122
    172.16.1.135
    172.16.1.210
    172.16.1.241
    Enough hosts reachable (required: 22, reachable: 22)
                                                                                                                 
    ┌──(kali㉿kali)-[~/桌面]
    └─$ fping  -g 172.16.1.0/29  -A -m -q -a -x 3                                         
    172.16.1.2
    Not enough hosts reachable (required: 3, reachable: 1)

##### 24.-N和-Q #####

*  \-N, --netdata 与netdata兼容的输出（需要-l -Q）
 *  \-Q, --squiet=SECS 与-q相同，但是每n秒显示一次摘要

┌──(kali㉿kali)-[~]
    └─$ fping 172.16.1.110 -l -Q 5 -N                                         
    CHART fping.172_16_1_110_packets '' 'FPing Packets for host 172.16.1.110' packets '172_16_1_110' fping.packets line 110020 5
    DIMENSION xmt sent absolute 1 1
    DIMENSION rcv received absolute 1 1
    BEGIN fping.172_16_1_110_packets
    SET xmt = 5
    SET rcv = 5
    END
    CHART fping.172_16_1_110_quality '' 'FPing Quality for host 172.16.1.110' percentage '172_16_1_110' fping.quality area 110010 5
    DIMENSION returned '' absolute 1 1
    BEGIN fping.172_16_1_110_quality
    SET returned = 100
    END
    CHART fping.172_16_1_110_latency '' 'FPing Latency for host 172.16.1.110' ms '172_16_1_110' fping.latency area 110000 5
    DIMENSION min minimum absolute 1 1000000
    DIMENSION max maximum absolute 1 1000000
    DIMENSION avg average absolute 1 1000000
    BEGIN fping.172_16_1_110_latency
    SET min = 363075
    SET avg = 428782
    SET max = 564082
    END
    BEGIN fping.172_16_1_110_packets
    SET xmt = 5
    SET rcv = 5
    END
    BEGIN fping.172_16_1_110_quality
    SET returned = 100
    END
    BEGIN fping.172_16_1_110_latency
    SET min = 270521
    SET avg = 373692
    SET max = 417305
    END
    ^C172.16.1.110 : xmt/rcv/%loss = 11/11/0%, min/avg/max = 0.271/0.410/0.564

##### 25.显示累计中断时间 #####

*  \-o, --outage 显示累计中断时间（丢失的数据包/报文时间间隔）

┌──(kali㉿kali)-[~]
    └─$ fping 172.16.1.110 -l -o        
    172.16.1.110 : [0], 64 bytes, 0.386 ms (0.386 avg, 0% loss)
    172.16.1.110 : [1], 64 bytes, 0.633 ms (0.509 avg, 0% loss)
    172.16.1.110 : [2], 64 bytes, 0.447 ms (0.489 avg, 0% loss)
    172.16.1.110 : [3], 64 bytes, 0.362 ms (0.457 avg, 0% loss)
    ^C
    172.16.1.110 : xmt/rcv/%loss = 4/4/0%, outage(ms) = 0, min/avg/max = 0.362/0.457/0.633

![在这里插入图片描述][2021031215243552.png_pic_center]

##### 26.设置ping数据包到一个目标的时间间隔 #####

*  \-p, --period=MSEC 设置ping数据包到一个目标的时间间隔（单位：毫秒） (在循环和计数模式下，默认值：1000ms = 1s)

下面将ping数据包的时间间隔设置为0.001秒，同时使用-o选项。通过结果可以看到，fping的速度非常快，以至于在第4，20，30，33，42次ping时，因为时间过短，导致超时丢包。在最后统计时outage(ms) = 5。

┌──(kali㉿kali)-[~]
    └─$ fping 172.16.1.114 -l -p 1 -o                                         
    172.16.1.114 : [0], 64 bytes, 0.581 ms (0.581 avg, 0% loss)
    172.16.1.114 : [1], 64 bytes, 0.433 ms (0.507 avg, 0% loss)
    172.16.1.114 : [2], 64 bytes, 0.514 ms (0.509 avg, 0% loss)
    172.16.1.114 : [3], 64 bytes, 0.625 ms (0.538 avg, 0% loss)
    172.16.1.114 : [4], timed out (0.538 avg, 20% loss)
    172.16.1.114 : [5], 64 bytes, 0.468 ms (0.524 avg, 16% loss)
    172.16.1.114 : [6], 64 bytes, 0.539 ms (0.527 avg, 14% loss)
    172.16.1.114 : [7], 64 bytes, 0.507 ms (0.524 avg, 12% loss)
    172.16.1.114 : [8], 64 bytes, 0.991 ms (0.582 avg, 11% loss)
    172.16.1.114 : [9], 64 bytes, 0.502 ms (0.573 avg, 10% loss)
    172.16.1.114 : [10], 64 bytes, 0.504 ms (0.566 avg, 9% loss)
    172.16.1.114 : [11], 64 bytes, 0.508 ms (0.561 avg, 8% loss)
    172.16.1.114 : [12], 64 bytes, 0.624 ms (0.566 avg, 7% loss)
    172.16.1.114 : [13], 64 bytes, 0.503 ms (0.562 avg, 7% loss)
    172.16.1.114 : [14], 64 bytes, 0.486 ms (0.556 avg, 6% loss)
    172.16.1.114 : [15], 64 bytes, 0.676 ms (0.564 avg, 6% loss)
    172.16.1.114 : [16], 64 bytes, 0.486 ms (0.559 avg, 5% loss)
    172.16.1.114 : [17], 64 bytes, 0.474 ms (0.554 avg, 5% loss)
    172.16.1.114 : [18], 64 bytes, 0.473 ms (0.550 avg, 5% loss)
    172.16.1.114 : [19], 64 bytes, 0.554 ms (0.550 avg, 5% loss)
    172.16.1.114 : [20], timed out (0.550 avg, 9% loss)
    172.16.1.114 : [21], 64 bytes, 0.922 ms (0.569 avg, 9% loss)
    172.16.1.114 : [22], 64 bytes, 0.516 ms (0.566 avg, 8% loss)
    172.16.1.114 : [23], 64 bytes, 0.580 ms (0.567 avg, 8% loss)
    172.16.1.114 : [24], 64 bytes, 0.469 ms (0.562 avg, 8% loss)
    172.16.1.114 : [25], 64 bytes, 0.461 ms (0.558 avg, 7% loss)
    172.16.1.114 : [26], 64 bytes, 0.735 ms (0.565 avg, 7% loss)
    172.16.1.114 : [27], 64 bytes, 0.926 ms (0.579 avg, 7% loss)
    172.16.1.114 : [28], 64 bytes, 0.556 ms (0.578 avg, 6% loss)
    172.16.1.114 : [29], 64 bytes, 0.875 ms (0.589 avg, 6% loss)
    172.16.1.114 : [30], timed out (0.589 avg, 9% loss)
    172.16.1.114 : [31], 64 bytes, 0.484 ms (0.585 avg, 9% loss)
    172.16.1.114 : [32], 64 bytes, 0.854 ms (0.594 avg, 9% loss)
    172.16.1.114 : [33], timed out (0.594 avg, 11% loss)
    172.16.1.114 : [34], 64 bytes, 0.454 ms (0.590 avg, 11% loss)
    172.16.1.114 : [35], 64 bytes, 0.603 ms (0.590 avg, 11% loss)
    172.16.1.114 : [36], 64 bytes, 0.552 ms (0.589 avg, 10% loss)
    172.16.1.114 : [37], 64 bytes, 0.524 ms (0.587 avg, 10% loss)
    172.16.1.114 : [38], 64 bytes, 0.859 ms (0.595 avg, 10% loss)
    172.16.1.114 : [39], 64 bytes, 0.434 ms (0.590 avg, 10% loss)
    172.16.1.114 : [40], 64 bytes, 0.523 ms (0.589 avg, 9% loss)
    172.16.1.114 : [41], 64 bytes, 0.987 ms (0.599 avg, 9% loss)
    172.16.1.114 : [42], timed out (0.599 avg, 11% loss)
    ^C
    172.16.1.114 : xmt/rcv/%loss = 43/38/11%, outage(ms) = 5, min/avg/max = 0.433/0.599/0.991

\-R, --random 随机分组数据(为了阻止链路数据压缩)，代替全0作为分组数据，将ping生成随机字节， 来阻止像链路数据压缩的情形。

##### 27.设置源IP地址 #####

*  \-S, --src=IP 设置源IP地址

当主机中存在多个IP地址时，可以用-S选项选择源地址。后面只能跟IP/IPv6地址，不能写网卡名。

┌──(kali㉿kali)-[~]
    └─$ fping --src=172.16.1.104 172.16.1.111                                 
    172.16.1.111 is alive

##### 28.危险参数 #####

**-i, --interval=MSEC 定义发送ping数据包之间的间隔（默认值：10ms）**

**-r, --retry=N ping重试次数 (默认值: 3)**

**-t, --timeout=MSEC 设置ping到单个目标IP初始超时时间。 (默认: 500 ms,但 -l/-c/-C除外, 其中-p周期最长为2000ms)**

以上三个选项有操作风险。例如给-i和-t设置了一个较低值，给-r设置了一个较高的值。如下所示。

*  \-i 当 n < 10 毫秒
 *  \-r 当 n > 20 毫秒
 *  \-t 当 n < 250 毫秒

这三个操作可能会导致网络大量泛洪等问题。因此建议网络管理员在安装fping时，设置只有root用户才能运行fping，以防止普通用户访问时错误使用fping。

以上。

### 参考文献 ###

[FPING MAN][]

[fping(8) - Linux man page][fping_8_ - Linux man page]

[FPING(8)][FPING_8]

[Fping – A High Performance Ping Tool for Linux][Fping _ A High Performance Ping Tool for Linux]

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center]: /images/20221023/5943e206ea0c419ab29cc3acddecaf08.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 1]: /images/20221023/6165e88195dc4e03b500b3827c2f6618.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 2]: /images/20221023/1ac42d36fa7348f781e06467fc1709fa.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L05PV1NIVVQ_size_16_color_FFFFFF_t_70_pic_center 3]: /images/20221023/3cba49a793dc4ed2a9c705ff171510af.png
[2021031215243552.png_pic_center]: /images/20221023/a485ac9f083f4699b2cb193da75bdf3f.png
[FPING MAN]: https://fping.org/fping.1.html
[fping_8_ - Linux man page]: https://linux.die.net/man/8/fping
[FPING_8]: https://manpages.debian.org/testing/fping/fping.8.en.html
[Fping _ A High Performance Ping Tool for Linux]: https://www.tecmint.com/ping-multiple-linux-hosts-using-fping/