mac下载python3哪个版本_mac下安装Python3.*(最新版本)

落日映苍穹つ 2022-10-27 01:58 351阅读 0赞

前言：mac系统自带python，不过以当前mac系统的最新版本为例，自带的python版本都是2.\*版本，虽然不影响老版本项目的运行，但是python最新的3.\*版本的一些语法与2.\*版本并不相同，网上的教程大神们也肯定都更新出了最新版的教程，我们不论是学习还是使用，当然用最新版会更好一点。

1、在安装最新版Python3.\*之前，我们先熟悉一下系统自带的python。

Mac系统自带python路径为／System／Library／Frameworks／Python.framework/Version,我们先来打开目录看一下：

open /System/Library/Frameworks/Python.framework/Versions

![20180513131438202487.png][]

我们看到这里有多个python版本，而在Current目录下存放的是系统当前的python版本。

mac既然自带了python，当然肯定配置好了python的全局命令，我们直接在终端运行：

python

![20180513131438480818.png][]

运行正常。到这里也差不多对mac系统自带的python有所了解，接下来我们开始安装最新版本的python。

2、开始安装(这里我们使用神器homebrew，还不熟悉此神器的小伙伴请自行百度，也可点击链接直接前往下载)

安装前先搜索一下是否已经存在python3的包：

brew search python3

![20180513131438558946.png][]

已经存在，我们可以直接安装了：

brew install python3

==>Auto-updated Homebrew!

Updated 1 tap (homebrew/core).

==>Updated Formulae

angular-cli fluent-bitlinks postgresql@9.6texmath

byacc fnmlt qcachegrind tile38

caddy ipython osrm-backendrhino wtf

cfitsio ipython@5 postgresqlsiril

cfssl libpq postgresql@9.4sundials

dnscrypt-proxylibpqxx postgresql@9.5synfig

==>Installing dependencies for python:sphinx-doc,gdbm,openssl,sqlite,xz

==>Installing python dependency:sphinx-doc

==>Downloading https://homebrew.bintray.com/bottles/sphinx-doc-1.7.4.high\_sierr

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Pouring sphinx-doc-1.7.4.high\_sierra.bottle.tar.gz

==>Caveats

This formula is keg-only, which means it was not symlinked into /usr/local,

because this formula is mainly used internally by other formulae.

Users are advised to use \`pip\` to install sphinx-doc.

If you need to have this software first in your PATH run:

echo ‘export PATH="/usr/local/opt/sphinx-doc/bin:$PATH"‘ >> ~/.bash\_profile

==>Summary

??/usr/local/Cellar/sphinx-doc/1.7.4: 2,642 files, 36.8MB

==>Installing python dependency:gdbm

==>Downloading https://homebrew.bintray.com/bottles/gdbm-1.14.1\_1.high\_sierra.b

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Pouring gdbm-1.14.1\_1.high\_sierra.bottle.tar.gz

??/usr/local/Cellar/gdbm/1.14.1\_1: 20 files, 555.7KB

==>Installing python dependency:openssl

==>Downloading https://homebrew.bintray.com/bottles/openssl-1.0.2o\_1.high\_sierr

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Pouring openssl-1.0.2o\_1.high\_sierra.bottle.tar.gz

==>Caveats

A CA file has been bootstrapped using certificates from the SystemRoots

keychain. To add additional certificates (e.g. the certificates added in

the System keychain), place .pem files in

/usr/local/etc/openssl/certs

and run

/usr/local/opt/openssl/bin/c\_rehash

This formula is keg-only, which means it was not symlinked into /usr/local,

because Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries.

If you need to have this software first in your PATH run:

echo ‘export PATH="/usr/local/opt/openssl/bin:$PATH"‘ >> ~/.bash\_profile

For compilers to find this software you may need to set:

LDFLAGS:-L/usr/local/opt/openssl/lib

CPPFLAGS: -I/usr/local/opt/openssl/include

For pkg-config to find this software you may need to set:

PKG\_CONFIG\_PATH: /usr/local/opt/openssl/lib/pkgconfig

==>Summary

??/usr/local/Cellar/openssl/1.0.2o\_1: 1,791 files, 12.3MB

==>Installing python dependency:sqlite

==>Downloading https://homebrew.bintray.com/bottles/sqlite-3.23.1.high\_sierra.b

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Pouring sqlite-3.23.1.high\_sierra.bottle.tar.gz

==>Caveats

This formula is keg-only, which means it was not symlinked into /usr/local,

because macOS provides an older sqlite3.

If you need to have this software first in your PATH run:

echo ‘export PATH="/usr/local/opt/sqlite/bin:$PATH"‘ >> ~/.bash\_profile

For compilers to find this software you may need to set:

LDFLAGS:-L/usr/local/opt/sqlite/lib

CPPFLAGS: -I/usr/local/opt/sqlite/include

For pkg-config to find this software you may need to set:

PKG\_CONFIG\_PATH: /usr/local/opt/sqlite/lib/pkgconfig

==>Summary

??/usr/local/Cellar/sqlite/3.23.1: 11 files, 3MB

==>Installing python dependency:xz

==>Downloading https://homebrew.bintray.com/bottles/xz-5.2.4.high\_sierra.bottle

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Pouring xz-5.2.4.high\_sierra.bottle.tar.gz

??/usr/local/Cellar/xz/5.2.4: 92 files, 1MB

==>Installingpython

Warning:Building python from source:

The bottle needs the Apple Command Line Tools to be installed.

You can install them, if desired, with:

xcode-select --install

==>Downloading https://www.python.org/ftp/python/3.6.5/Python-3.6.5.tar.xz

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>./configure --prefix=/usr/local/Cellar/python/3.6.5 --enable-ipv6 --dataroot

==>make

==>make install PYTHONAPPSDIR=/usr/local/Cellar/python/3.6.5

==>make frameworkinstallextras PYTHONAPPSDIR=/usr/local/Cellar/python/3.6.5/sha

==>Downloading https://files.pythonhosted.org/packages/72/c2/c09362ab29338413ab

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Downloading https://files.pythonhosted.org/packages/ae/e8/2340d46ecadb1692a1

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>Downloading https://files.pythonhosted.org/packages/5d/c1/45947333669b31bc6b

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\# 100.0%

==>make html

Error:An unexpected error occurred during the \`brew link\` step

The formula built, but is not symlinked into /usr/local

Permission denied @ dir\_s\_mkdir - /usr/local/Frameworks

Error:Permission denied @ dir\_s\_mkdir - /usr/local/Frameworks

所有的包都下载完毕，但是我们却发现最后报了两条错误，大概意思是公式已经建立，但是在创建连接的时候因为没有权限而发生意外错误。在报错信息里我们看到一个目录/usr/local/Frameworks，我们先去找一下这个目录：

open /usr/local/Frameworks

发现这个目录竟然不存在，那我们就来手动创建一个：

sudo mkdir /usr/local/Frameworks

创建好目录之后，再来解决权限问题：

sudo chown $(whoami):admin /usr/local/Frameworks

不报错即为修改成功，修改好权限之后，还需要手动执行一下安装时未完成的创建连接：

brew link python3

![20180513131438598010.png][]

连接成功。咱们来查看一下当前系统下的python3的信息：

brew info python3

![20180513131438739617.png][]

发现python3被安装到了/usr/local/bin/python3目录下，有兴趣的小伙伴自行前往查看想过配置文件。

到这里python3的安装就算完成了，不过可能有小伙伴已经发现，不管是在终端运行python -V查看版本号还是直接运行python启动python命令行模式，默认的python版本还是系统自带的2.\*版本。其实这时候只运行命令时需要把python改为python3就行了，当然，有兴趣的小伙伴也可以尝试配置一下默认版本，把当前系统的默认版本修改为3.\*版本。知乎上已经贴出了各种各样的方法，我这里就不多做赘述了。

[20180513131438202487.png]: http://image.mamicode.com/info/201805/20180513131438202487.png
[20180513131438480818.png]: http://image.mamicode.com/info/201805/20180513131438480818.png
[20180513131438558946.png]: http://image.mamicode.com/info/201805/20180513131438558946.png
[20180513131438598010.png]: http://image.mamicode.com/info/201805/20180513131438598010.png
[20180513131438739617.png]: http://image.mamicode.com/info/201805/20180513131438739617.png