ilo管理脚本 hponcfg方式

叁歲伎倆 2022-09-12 06:42 455阅读 0赞

## 使用方法: ##

在需要初始化ilo的机器上执行  
chmod +x IloInstall.sh && bash IloInstall.sh

## 兼容性 ##

centos6/7/8  
Redhat6/7/8  
Ilo版本1/2/3/4/5

## 功能： ##

1.  自动升级 ilo到最新版本，如果有新的版本，可以去脚本中替换  
    ilo1  
    CP023365.scexe  
    ilo2  
    CP035238.scexe  
    ilo3  
    CP046328.scexe  
    ilo4  
    CP046465.scexe  
    ilo5  
    firmware-ilo5-1.48-1.1.x86\_64.rpm  
    firmware-ilo5-2.44-1.1.x86\_64.rpm
2.  自动初始化ilo地址，为172.16.\*\*\* （\*\*\*是生产IP的后两个，例如生产ip是192.168.8.8，ILO地址就是172.16.8.8）
3.  自动初始化ILO的账户密码，账户为Administrator，密码为Abc\*\*\*（\*\*\*为ilo地址，例如172.16.8.8 的密码为Abc172.16.8.8）
4.  自动初始化ILO主机的名字为生产IP，方便后期在Oneview中管理

所有需要的包都在

https://download.csdn.net/download/qq_26129413/24158650

#!/bin/bash
    ## 2021-9-22
    _Red="\033[31m#"
    _Green="\033[32m#"
    _End="\033[0m"
    
    wget http://192.168.1.8/hponcfg-5.5.0-0.x86_64.rpm  ###把包都放在了一台内网nginx服务器上，方便下载
    wget http://192.168.1.8/linux-LOsamplescripts5.20.0.tgz ###下载hponcfg的配置文件
    tar zxf /root/linux-LOsamplescripts5.20.0.tgz -C /mnt/ && rpm -ivh hponcfg-5.5.0-0.x86_64.rpm >/dev/null 2>&1  ###安装hponcfg 并把配置文件解压到/mnt下
    
    ### IloInitialize 是初始化动作，包含修改ilo地址 修改用户名密码等
    IloInitialize(){ 
    
    #ILONAME=$(ifconfig $( ip route show | awk '/default/ { print $5 }' ) |sed -n 2p |awk -F ' ' '{print$2}')
    ILONAME=$(ifconfig $( ip route show | awk '/default/ { print $5 }' ) |sed -n 2p |awk -F ' ' '{print$2}' |sed 's/.*://')
    if [[ $? -eq 0 ]];then
        echo -e "$_Green 生产IP获取成功 $_End"; 
        sleep 0.5;
    else
        echo -e "$_Red 生产IP获取失败 $_End";
        exit;
    fi
    
    ILOCODE=ILO$(dmidecode -t system|grep 'Serial Number'|awk '{print $3}')
    if [[ $? -eq 0 ]];then
        echo -e "$_Green SN号获取成功 $_End";
        sleep 0.5;
    else
        echo -e "$_Red SN号获取失败 $_End";
        exit;
    fi
    ILOIP=172.16.$(ifconfig $( ip route show | awk '/default/ { print $5 }' ) |sed -n 2p |awk -F ' ' '{print$2}'|awk -F '.' '{print $3"."$4}')
    if [[ $? -eq 0 ]];then
        echo -e "$_Green ILO地址获取成功 $_End"; 
        sleep 0.5; 
    else
        echo -e "$_Red ILO地址获取失败 $_End";
        exit;
    fi
    
    
    cat << EOF > /mnt/Administrator_reset_pw.xml                          <RIBCL VERSION="2.0"> <LOGIN USER_LOGIN="adminname" PASSWORD="password"> <USER_INFO MODE="write"> <MOD_USER USER_LOGIN="Administrator"> <PASSWORD value="pmphilo$ILOIP"/> </MOD_USER> </USER_INFO> </LOGIN> </RIBCL> EOF
    sleep 0.5
    hponcfg -f /mnt/Administrator_reset_pw.xml 
    
    sleep 0.5
    
    
    
    cat << EOF > /mnt/Mod_Network_Settings.xml                   <RIBCL VERSION="2.0"> <LOGIN USER_LOGIN="adminname" PASSWORD="password"> <RIB_INFO MODE="write"> <MOD_NETWORK_SETTINGS> <ENABLE_NIC value="Yes"/> <REG_DDNS_SERVER value="Yes"/> <PING_GATEWAY value="Yes"/> <DHCP_DOMAIN_NAME value="Yes"/> <SPEED_AUTOSELECT value="YES"/> <NIC_SPEED value="100"/> <FULL_DUPLEX value="Yes"/> <DHCP_ENABLE value="No"/> <IP_ADDRESS value="$ILOIP"/> <SUBNET_MASK value="255.255.0.0"/> <GATEWAY_IP_ADDRESS value="0.0.0.0"/> <DNS_NAME value="$ILOCODE"/> <DOMAIN_NAME value=""/> <DHCP_GATEWAY value="Yes"/> <DHCP_DNS_SERVER value="Yes"/> <DHCP_WINS_SERVER value="Yes"/> <DHCP_STATIC_ROUTE value="Yes"/> <REG_WINS_SERVER value="Yes"/> <PRIM_DNS_SERVER value="0.0.0.0"/> <SEC_DNS_SERVER value="0.0.0.0"/> <TER_DNS_SERVER value="0.0.0.0"/> <PRIM_WINS_SERVER value="0.0.0.0"/> <SEC_WINS_SERVER value="0.0.0.0"/> <STATIC_ROUTE_1 DEST="0.0.0.0" MASK="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_2 DEST="0.0.0.0" MASK="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_3 DEST="0.0.0.0" MASK="0.0.0.0" GATEWAY="0.0.0.0"/>     <ENCLOSURE_IP_ENABLE VALUE="Yes"/> <DHCP_SNTP_SETTINGS value="Yes"/> <SNTP_SERVER1 value="172.16.1.111"/> <SNTP_SERVER2 value=""/> <TIMEZONE value="America/Caracas"/>                                    </MOD_NETWORK_SETTINGS> </RIB_INFO> </LOGIN> </RIBCL> EOF
    sleep 0.5
    hponcfg -f /mnt/Mod_Network_Settings.xml
    sleep 0.5
    
    
    
    
    cat << EOF > /mnt/Set_Server_Name.xml                <RIBCL VERSION="2.0"> <LOGIN USER_LOGIN="adminname" PASSWORD="password"> <SERVER_INFO MODE="write"> <SERVER_NAME value ="$ILONAME"/> </SERVER_INFO> </LOGIN> </RIBCL> EOF
    sleep 0.5
    hponcfg -f /mnt/Set_Server_Name.xml
    sleep 1
    
    DATE=$(date -d "1 minute ago")
    echo  "生产IP是 $ILONAME ILO登录IP是 $ILOIP ILO物理机编号 $ILOCODE 登录账号 Administrator 登录密码 pmphilo$ILOIP 安装日期 $DATE" >/root/$ILONAME
    
    
    }
    
    
    ### 下面是检测ilo版本，并升级到最新版
    ilo1(){ 
    echo "$_Green 准备升级 ilo1 $_End"
    wget http://192.168.1.8/CP023365.scexe
    echo "y" | bash CP023365.scexe
    sleep 5
    IloInitialize
    }
    
    ilo2(){ 
    echo "$_Green 准备升级 ilo2 $_End"
    wget http://192.168.1.8/CP035238.scexe
    echo "y" | bash CP035238.scexe
    sleep 5
    IloInitialize
    }
    
    ilo3(){ 
    echo "$_Green 准备升级 ilo3 $_End"
    wget http://192.168.1.8/CP046328.scexe
    echo "y" | bash CP046328.scexe
    sleep 5
    IloInitialize
    }
    
    ilo4(){ 
    echo "$_Green 准备升级 ilo4 $_End"
    wget http://192.168.1.8/CP046465.scexe
    echo "y" | bash CP046465.scexe
    sleep 5
    IloInitialize
    }
    
    ilo5(){ 
    echo "$_Green 准备升级 ilo5 $_End"
    wget http://192.168.1.8/firmware-ilo5-1.48-1.1.x86_64.rpm
    rpm2cpio firmware-ilo5-1.48-1.1.x86_64.rpm  |cpio -idmv
    echo "y" | bash /root/usr/lib/x86_64-linux-gnu/firmware-ilo5-1.48-1.1/setup
    sleep 5
    
    wget http://192.168.1.8/firmware-ilo5-2.44-1.1.x86_64.rpm
    rpm2cpio firmware-ilo5-2.44-1.1.x86_64.rpm  |cpio -idmv
    echo "y" | bash /root/usr/lib/x86_64-linux-gnu/firmware-ilo5-2.44-1.1/setup
    sleep 5
    IloInitialize
    }
    
    VersionError(){ 
    echo "$_Red ilo 版本查询错误 $_End"
    }
    
    iloversion=$(hponcfg -v |awk 'NR==3{print $9}')
    case $iloversion  in
    1)
        ilo1
        ;;
    2)
        ilo2
        ;;
    3)
        ilo3
        ;;
    4)
        ilo4
        ;;
    5)
        ilo5
        ;;
    *)
        VersionError
    esac