SAP QM Automatic Defect Recording

太过爱你忘了你带给我的痛 2022-08-30 11:52 13阅读 0赞

# Introduction #

During Quality control, defect arises when a product fails to satisfy certain test procedures or standards. Defect can occur due to faults in design/manufacturing process, human error, poor quality raw material etc. SAP allows detailed entry of defects, initiate necessary actions to resolve and prevent such issues.

This blog will provide steps to setup and execute automatic defect recording, and further process with Quality Notification.

# Customizing Parameters #

# Inspection type – Notification type Assignment #

– During result recording, when defect are raised for inspection lot, then quality notification (QN) is created and update as QN items. Based on inspection type, default QN types can be assigned.

IMG Path: Under SPRO > Quality Management > Quality Inspection > Inspection Lot Creation > Maintain Inspection Type

![54ec1a64de88e199e28f5ec1fc7ceff7.png][]

# Defect Class with Activate QN and Catalog setup. #

– Using Activate Q-notification, QN raised will have OSNO status i.e. QN will remain open after usage decision.  
– When used in Catalog setup, enables automatic QN activation during defect recording.

IMG Path: Quality Planning > Basic Data > Catalogs

![0a0ffd1ec44edd9a6130a27203ed63d8.png][]

Setup Catalog,

![012b2a6552c10d45a0db1015eab6dcac.png][]

# Catalog Profile #

– Setup Catalog profile and assign in notification type

![2607b19a55ecfbf3c221e2a33753dd23.png][]

# Confirmation Profile #

– Specify the type of information or confirmation objects that you can record for a defect.  
– For **Summarized** defects recording, conf. objects include – defect type and defect type text.  
– For **Individual** defects recording, conf. objects include – defect type, defect type text, defect location, assembly, defect cause, defect cause text, task, activity text, and defect valuation

IMG Path: Quality Notification > Defect Recording > Define Confirmation Profile

![b236262b42ba32533830a7062eed26b6.png][]

# Report type #

– Link with Confirmation Profile & Catalog Profile.  
– **Setup priority for Catalog profile** (1.Material Master > 2.QN type > 3.Record type).  
  
***Note***: With origin option, users will have flexibility over Catalog selection during QN process.

IMG Path: Quality Notification > Defect Recording > Define Report Type

![9abd9dacd2ca1d5ee1a38b74e2d45979.png][]

Assign Report type to Work Center

– Setup entries at Work center – Plant level.  
– **Setup Priority for Report type** in customizing (Work center > Plant > Report type).

***Note***: With default report type, user can skip ‘Report type’ input dialog option during defect recording.

![5382f063c5929cf29431482a8e1a0093.png][]

# Defect Recording Types #

![cd593d1c5955028f1a72d5f9e55e5a55.png][]

(Source)

1.  Manual Defect Recording
2.  Automatic Defect Recording  
    Master Data, Tcode: **QS23**,  
    – MIC, control indicator > enable defect recording (for both types).– MIC > Setup defect code in case characteristics attribute is ‘Rejected’ (for automatic).***Note***: When characteristics fails, defect record entry will done automatically. Users can skip ‘Create Defect’ option.  
    Transaction Data, Tcode: **QA32** / **QA02**,  
    Record Defect > Select defect record > Activate Notification (if defect class with Activate-QN option disabled) > Input necessary data > Continue > Save.QN status is changed from ‘OSNO DEFR’ to ‘NOCO’.

# Defect Recording Levels #

The availability or absence of an inspection plan or material specification determines the assignment level to record defects. Three levels available to record defects.

– Inspection lot  
– Inspection operation  
– Inspection characteristic

#  #

# Creation of Defect Records #

*  Option1 – During Results recording, **Tcode: QA32 / QA02**  
    Select lot > Create Defect or Select lot > Results > Choose Operation/ Char level > DefectsOn Save, Notification created/changed. Check defects levels in table QMFE.
 *  Option2 – Before UD, Tcode: **QA32 / QA11**  
    Record UD screen > Defects (Assignment only at Lot level).
 *  Option3 – Using separate screen, with Tcode,  
    **QF11** – Lot level  
    **QF21** – Operation level  
    **QF31** – Characteristics Level

# Processing of Defect Records #

*  Case1 – Defects are activated (QN status set to OSNO) -> complete UD -> follow further QN process.
 *  Case2 – Defects are not activated -> after UD, QN status set to ‘NOCO DEFR’ -> QN completed.

# Editing Defect Records #

*  Automatically created defect records are deleted by the system automatically if the valuation of an inspection characteristic is changed during results recording.
 *  Manually Created Defect Records can be changed or deleted if the inspection has not been completed and the usage decision has not been made.

![c846aff897a3c1cced5095c8e0fd687f.png][]

# Summary #

Using above steps we can setup automatic/manual defect recording and execute further QN process.

***SAP Help Reference***: *https://help.sap.com/viewer/8dae2bea4b2044af9b806665fb2d242b/6.00.31/en-US/34c7b65334e6b54ce10000000a174cb4.html*

https://blogs.sap.com/2021/07/15/automatic-defect-recording-qm-im-rr-def/

[54ec1a64de88e199e28f5ec1fc7ceff7.png]: /images/20220829/a4895cf0e90f463a966d426b5108a61b.png
[0a0ffd1ec44edd9a6130a27203ed63d8.png]: /images/20220829/1e79e326ac4e461184f512e303203bbd.png
[012b2a6552c10d45a0db1015eab6dcac.png]: /images/20220829/87f3d008647f4cb1be9be97e0733e003.png
[2607b19a55ecfbf3c221e2a33753dd23.png]: /images/20220829/36fe42130dcc4d21baab8e641a54b9d2.png
[b236262b42ba32533830a7062eed26b6.png]: /images/20220829/1657a14ea686441d96e2b72b6396aaf6.png
[9abd9dacd2ca1d5ee1a38b74e2d45979.png]: /images/20220829/048817fe714c41bb9e3ef0280f293b67.png
[5382f063c5929cf29431482a8e1a0093.png]: /images/20220829/61a68bcad3ad4166b32aa0282035de06.png
[cd593d1c5955028f1a72d5f9e55e5a55.png]: /images/20220829/f6be2d02b408483e9b7d8ac08223edc7.png
[c846aff897a3c1cced5095c8e0fd687f.png]: /images/20220829/97abcea1fdbe490bb96f5bbbd84ead7a.png