dubbo——管理员指南

小鱼儿 2022-08-13 00:55 212阅读 0赞

管理员指南

*  [安装手册][Link 1]
    
     *  [示例提供者安装][Link 2]
     *  [示例消费者安装][Link 3]
     *  [Zookeeper注册中心安装][Zookeeper]
     *  [Redis注册中心安装][Redis]
     *  [简易注册中心安装][Link 4]
     *  [简易监控中心安装][Link 5]
     *  [管理控制台安装][Link 6]
 *  [运维手册][Link 7]
    
     *  [管理控制台运维][Link 8]

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>推荐使用Zookeeper注册中心</td> 
  </tr> 
 </tbody> 
</table>

*  你可以只运行[Demo Provider][]和[Demo Consumer][]，它们缺省配置为通过Multicast注册中心广播互相发现，建议在不同机器上运行，如果在同一机器上，需设置unicast=false：即：multicast://224.5.6.7:1234?unicast=false，否则发给消费者的单播消息可能被提供者抢占，两个消费者在同一台机器也一样，只有multicast注册中心有此问题。

*  你也可以运行多个[Demo Provider][Link 2]和[Demo Consumer][Link 3]，来验证软负载均衡，Demo Consumer可以直接启动多个实例，而多个Demo Provider因有端口冲突，可在不同机器上运行，或者修改Demo Provider安装目录下conf/dubbo.properties配置中的dubbo.protocol.port的值。

*  你也可以增加运行[Simple Monitor][Link 5]监控中心，它缺省配置为通过Multicast注册中心广播发现Provider和Consumer，并展示出它们的依赖关系，以及它们之间调用的次数和时间。

*  你也可以将Multicast注册中心换成Zookeeper注册中心，安装[Zookeeper Registry][Zookeeper]后，修改Demo Proivder，Demo Consumer，Simple Monitor三者安装目录下的conf/dubbo.properties，将dubbo.registry.address的值改为zookeeper://127.0.0.1:2181，同理，如果换成[Redis Registry][Redis]，值改为redis://127.0.0.1:6379，如果换成[Simple Registry][Link 4]，值改为dubbo://127.0.0.1:9090  
    注意：multicast地址不能配成127.0.0.1，也不能配成机器的IP地址，必须是D段广播地址，也就是：224.0.0.0到239.255.255.255之间的任意地址

## 安装手册 ##

([\+][Link 9]) ([\#][Link 1])

### 示例提供者安装 ###

([\+][Link 10]) ([\#][Link 2])

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-demo-provider/2.4.1/dubbo-demo-provider-2.4.1-assembly.tar.gz" rel="nofollow"> http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-demo-provider/2.4.1/dubbo-demo-provider-2.4.1-assembly.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf dubbo-demo-provider-2.4.1-assembly.tar.gz</code> 
     </div> 
     <div> 
      <code>cd dubbo-demo-provider-2.4.1</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>vi conf/dubbo.properties</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/start.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

**重启:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/restart.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**调试:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/start.sh debug</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**系统状态:**

**总控入口:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/server.sh start</code> 
     </div> 
     <div> 
      <code>./bin/server.sh stop</code> 
     </div> 
     <div> 
      <code>./bin/server.sh restart</code> 
     </div> 
     <div> 
      <code>./bin/server.sh debug</code> 
     </div> 
     <div> 
      <code>./bin/server.sh dump</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**标准输出:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>tail -f logs/stdout.log</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**命令行:** (See: [Telnet Command Reference][])

telnet 127.0.0.1 20880  
help

Or:

echo status | nc -i 1 127.0.0.1 20880

### 示例消费者安装 ###

([\+][Link 11]) ([\#][Link 3])

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-demo-consumer/2.4.1/dubbo-demo-consumer-2.4.1-assembly.tar.gz" rel="nofollow"> http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-demo-consumer/2.4.1/dubbo-demo-consumer-2.4.1-assembly.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf dubbo-demo-consumer-2.4.1-assembly.tar.gz</code> 
     </div> 
     <div> 
      <code>cd dubbo-demo-consumer-2.4.1</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/start.sh</code> 
     </div> 
     <div> 
      <code>tail -f logs/stdout.log</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

**重启:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/restart.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**调试:**

**系统状态:**

**总控入口:**

**标准输出:**

### Zookeeper注册中心安装 ###

([\+][Link 12]) ([\#][Zookeeper])

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>建议使用dubbo-2.3.3以上版本的zookeeper注册中心客户端</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td><a rel="nofollow">Zookeeper</a>是Apache Hadoop的子项目，强度相对较好，建议生产环境使用该注册中心。</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>Dubbo未对Zookeeper服务器端做任何侵入修改，只需安装原生的Zookeeper服务器即可，所有注册中心逻辑适配都在调用Zookeeper客户端时完成。</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>如果需要，可以考虑使用taobao的zookeeper监控：<a rel="nofollow">http://rdc.taobao.com/team/jm/archives/1450</a></td> 
  </tr> 
 </tbody> 
</table>

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://www.apache.org/dist//zookeeper/zookeeper-3.3.3/zookeeper-3.3.3.tar.gz" rel="nofollow"> http://www.apache.org/dist//zookeeper/zookeeper-3.3.3/zookeeper-3.3.3.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf zookeeper-3.3.3.tar.gz</code> 
     </div> 
     <div> 
      <code>cd zookeeper-3.3.3</code> 
     </div> 
     <div> 
      <code>cp conf/zoo_sample.cfg conf/zoo.cfg</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

如果不需要集群，zoo.cfg的内容如下：(其中data目录需改成你真实输出目录)

**zoo.cfg**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>tickTime=2000</code> 
     </div> 
     <div> 
      <code>initLimit=10</code> 
     </div> 
     <div> 
      <code>syncLimit=5</code> 
     </div> 
     <div> 
      <code>dataDir=/home/dubbo/zookeeper-3.3.3/data</code> 
     </div> 
     <div> 
      <code>clientPort=2181</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

如果需要集群，zoo.cfg的内容如下：(其中data目录和server地址需改成你真实部署机器的信息)

**zoo.cfg**

并在data目录下放置myid文件：(上面zoo.cfg中的dataDir)

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>mkdir data</code> 
     </div> 
     <div> 
      <code>vi myid</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

myid指明自己的id，对应上面zoo.cfg中server.后的数字，第一台的内容为1，第二台的内容为2，内容如下：

**myid**

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/zkServer.sh start</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/zkServer.sh stop</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**命令行:** (See: http://zookeeper.apache.org/doc/r3.3.3/zookeeperAdmin.html)

telnet 127.0.0.1 2181  
dump

Or:

echo dump | nc 127.0.0.1 2181

**用法:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>dubbo.registry.address=zookeeper://10.20.153.10:2181?backup=10.20.153.11:2181</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

Or:

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>&lt;</code> 
      <code>dubbo:registry</code> 
      <code>protocol</code> 
      <code>=</code> 
      <code>"zookeeper"</code> 
      <code>address</code> 
      <code>=</code> 
      <code>"10.20.153.10:2181,10.20.153.11:2181"</code> 
      <code>/&gt;</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

### Redis注册中心安装 ###

([\+][Link 13]) ([\#][Redis])

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td><strong>Redis使用</strong><br> 使用方式参见:&nbsp;<a href="http://alibaba.github.io/dubbo-doc-static/User+Guide-zh.htm#UserGuide-zh-RedisRegistry" rel="nofollow">Redis使用手册</a>，只需搭一个原生的Redis服务器，并将<a href="http://alibaba.github.io/dubbo-doc-static/User+Guide-zh.htm#UserGuide-zh-QuickStart" rel="nofollow">Quick Start</a>中Provider和Consumer里的conf/dubbo.properties中的dubbo.registry.addrss的值改为redis://127.0.0.1:6379即可使用</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/warning-3.gif"></td> 
   <td>2.1.0以上版本支持</td> 
  </tr> 
 </tbody> 
</table>

参见：http://redis.io/topics/quickstart

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://redis.googlecode.com/files/redis-2.4.8.tar.gz" rel="nofollow"> http://redis.googlecode.com/files/redis-2.4.8.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar xzf redis-2.4.8.tar.gz</code> 
     </div> 
     <div> 
      <code>cd redis-2.4.8</code> 
     </div> 
     <div> 
      <code>make</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>vi redis.conf</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>nohup ./src/redis-server redis.conf &amp;</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>killall redis-server</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**命令行:** (参见: http://redis.io/commands)

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./src/redis-cli</code> 
     </div> 
     <div> 
      <code>hgetall /dubbo/com.foo.BarService/providers</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

或者：

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>telnet 127.0.0.1 6379</code> 
     </div> 
     <div> 
      <code>hgetall /dubbo/com.foo.BarService/providers</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

### 简易注册中心安装 ###

([\+][Link 14]) ([\#][Link 4])

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/warning-3.gif"></td> 
   <td>Simple Registry没有经过严格测试，可能不健状，并且不支持集群，不建议用于生产环境。</td> 
  </tr> 
 </tbody> 
</table>

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-registry-simple/2.4.1/dubbo-registry-simple-2.4.1-assembly.tar.gz" rel="nofollow"> http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-registry-simple/2.4.1/dubbo-registry-simple-2.4.1-assembly.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf dubbo-registry-simple-2.4.1-assembly.tar.gz</code> 
     </div> 
     <div> 
      <code>cd dubbo-registry-simple-2.4.1</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/start.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

**重启:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/restart.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**调试:**

**系统状态:**

**总控入口:**

**标准输出:**

**命令行:** (See: [Telnet Command Reference][])

telnet 127.0.0.1 9090  
help

Or:

echo status | nc -i 1 127.0.0.1 9090

### 简易监控中心安装 ###

([\+][Link 15]) ([\#][Link 5])

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>Simple Monitor挂掉不会影响到Consumer和Provider之间的调用，所以用于生产环境不会有风险。</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/warning-3.gif"></td> 
   <td>Simple Monitor采用磁盘存储统计信息，请注意安装机器的磁盘限制，如果要集群，建议用<a rel="nofollow">mount</a>共享磁盘。</td> 
  </tr> 
 </tbody> 
</table>

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/warning-3.gif"></td> 
   <td>charts目录必须放在jetty.directory下，否则页面上访问不了。</td> 
  </tr> 
 </tbody> 
</table>

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-monitor-simple/2.4.1/dubbo-monitor-simple-2.4.1-assembly.tar.gz" rel="nofollow"> http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-monitor-simple/2.4.1/dubbo-monitor-simple-2.4.1-assembly.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf dubbo-monitor-simple-2.4.1-assembly.tar.gz</code> 
     </div> 
     <div> 
      <code>cd dubbo-monitor-simple-2.4.1</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:**

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/start.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

**重启:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/restart.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**调试:**

**系统状态:**

**总控入口:**

**标准输出:**

**命令行:** (See: [Telnet Command Reference][])

telnet 127.0.0.1 7070  
help

Or:

echo status | nc -i 1 127.0.0.1 7070

**访问:**

![dubbo-monitor-simple.jpg-version_1_modificationDate_1325788069000.jpg][]

### 管理控制台安装 ###

([\+][Link 16]) ([\#][Link 6])

<table>     
 <tbody> 
  <tr> 
   <td><img width="16" height="16" align="absmiddle" alt="" src="http://alibaba.github.io/dubbo-doc-static/check.gif"></td> 
   <td>管理控制台为内部裁剪版本，开源部分主要包含：路由规则，动态配置，服务降级，访问控制，权重调整，负载均衡，等管理功能。</td> 
  </tr> 
 </tbody> 
</table>

**安装:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://apache.etoak.com/tomcat/tomcat-6/v6.0.35/bin/apache-tomcat-6.0.35.tar.gz" rel="nofollow"> http://apache.etoak.com/tomcat/tomcat-6/v6.0.35/bin/apache-tomcat-6.0.35.tar.gz</a></code> 
     </div> 
     <div> 
      <code>tar zxvf apache-tomcat-6.0.35.tar.gz</code> 
     </div> 
     <div> 
      <code>cd apache-tomcat-6.0.35</code> 
     </div> 
     <div> 
      <code>rm -rf webapps/ROOT</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>wget <a href="http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-admin/2.4.1/dubbo-admin-2.4.1.war" rel="nofollow"> http://code.alibabatech.com/mvn/releases/com/alibaba/dubbo-admin/2.4.1/dubbo-admin-2.4.1.war</a></code> 
     </div> 
     <div> 
      <code>unzip dubbo-admin-2.4.1.war -d webapps/ROOT</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**配置:** (或将dubbo.properties放在当前用户目录下)

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>vi webapps/ROOT/WEB-INF/dubbo.properties</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**dubbo.properties**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>dubbo.registry.address=zookeeper://127.0.0.1:2181</code> 
     </div> 
     <div> 
      <code>dubbo.admin.root.password=root</code> 
     </div> 
     <div> 
      <code>dubbo.admin.guest.password=guest</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**启动:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/startup.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**停止:**

<table> 
 <tbody> 
  <tr> 
   <td> 
    <div title="Hint: double-click to select code"> 
     <div> 
      <code>./bin/shutdown.sh</code> 
     </div> 
    </div> </td> 
  </tr> 
 </tbody> 
</table>

**访问:** (用户:root,密码:root 或 用户:guest,密码:guest)

## 运维手册 ##

([\+][Link 17]) ([\#][Link 7])

### 管理控制台运维 ###

([\+][Link 18]) ([\#][Link 8])

#### 搜索页面 ####

当你需要管理Dubbo的服务时，首先要搜索到这个服务，然后打开它的管理页面：

![dubbo-search.png-version_1_modificationDate_1343130241000.png][]

#### 服务提供者页面 ####

![dubbo-providers.png-version_1_modificationDate_1343130241000.png][]

#### 服务消费者页面 ####

![dubbo-consumers.png-version_1_modificationDate_1343130241000.png][]

#### 服务应用页面 ####

![dubbo-applications.png-version_1_modificationDate_1343130241000.png][]

#### 添加路由规则页面 ####

![dubbo-add-route.png-version_1_modificationDate_1343130241000.png][]

#### 添加动态配置页面 ####

![dubbo-add-config.png-version_1_modificationDate_1343130245000.png][]

#### 服务注册 ####

#### 服务降级 ####

#### 路由规则 ####

#### 访问控制 ####

#### 动态配置 ####

#### 权重调节 ####

#### 负载均衡 ####

#### 服务负责人 ####

** **

[Link 1]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E5%AE%89%E8%A3%85%E6%89%8B%E5%86%8C
[Link 2]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%A4%BA%E4%BE%8B%E6%8F%90%E4%BE%9B%E8%80%85%E5%AE%89%E8%A3%85
[Link 3]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%A4%BA%E4%BE%8B%E6%B6%88%E8%B4%B9%E8%80%85%E5%AE%89%E8%A3%85
[Zookeeper]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-Zookeeper%E6%B3%A8%E5%86%8C%E4%B8%AD%E5%BF%83%E5%AE%89%E8%A3%85
[Redis]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-Redis%E6%B3%A8%E5%86%8C%E4%B8%AD%E5%BF%83%E5%AE%89%E8%A3%85
[Link 4]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%AE%80%E6%98%93%E6%B3%A8%E5%86%8C%E4%B8%AD%E5%BF%83%E5%AE%89%E8%A3%85
[Link 5]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%AE%80%E6%98%93%E7%9B%91%E6%8E%A7%E4%B8%AD%E5%BF%83%E5%AE%89%E8%A3%85
[Link 6]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%AE%A1%E7%90%86%E6%8E%A7%E5%88%B6%E5%8F%B0%E5%AE%89%E8%A3%85
[Link 7]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E8%BF%90%E7%BB%B4%E6%89%8B%E5%86%8C
[Link 8]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-%E7%AE%A1%E7%90%86%E6%8E%A7%E5%88%B6%E5%8F%B0%E8%BF%90%E7%BB%B4
[Demo Provider]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-DemoProviderInstallation
[Demo Consumer]: http://alibaba.github.io/dubbo-doc-static/Administrator+Guide-zh.htm#AdministratorGuide-zh-DemoConsumerInstallation
[Link 9]: http://alibaba.github.io/dubbo-doc-static/Installation+Tutorial-zh.htm
[Link 10]: http://alibaba.github.io/dubbo-doc-static/Demo+Provider+Installation-zh.htm
[Telnet Command Reference]: http://alibaba.github.io/dubbo-doc-static/User+Guide.htm#UserGuide-TelnetCommandReference
[Link 11]: http://alibaba.github.io/dubbo-doc-static/Demo+Consumer+Installation-zh.htm
[Link 12]: http://alibaba.github.io/dubbo-doc-static/Zookeeper+Registry+Installation-zh.htm
[Link 13]: http://alibaba.github.io/dubbo-doc-static/Redis+Registry+Installation-zh.htm
[Link 14]: http://alibaba.github.io/dubbo-doc-static/Simple+Registry+Installation-zh.htm
[Link 15]: http://alibaba.github.io/dubbo-doc-static/Simple+Monitor+Installation-zh.htm
[dubbo-monitor-simple.jpg-version_1_modificationDate_1325788069000.jpg]: /images/20220810/ef205604fe364c4882603396af529136.png
[Link 16]: http://alibaba.github.io/dubbo-doc-static/Admin+Console+Installation-zh.htm
[Link 17]: http://alibaba.github.io/dubbo-doc-static/Operation+Tutorial-zh.htm
[Link 18]: http://alibaba.github.io/dubbo-doc-static/Admin+Console+Operation-zh.htm
[dubbo-search.png-version_1_modificationDate_1343130241000.png]: /images/20220810/230ca778ae3f42f1812d512a4c6e6141.png
[dubbo-providers.png-version_1_modificationDate_1343130241000.png]: /images/20220810/8c79489a85cd49bf92b4f9e57d863296.png
[dubbo-consumers.png-version_1_modificationDate_1343130241000.png]: /images/20220810/1516b892223b42eda7e1901853a9b6e9.png
[dubbo-applications.png-version_1_modificationDate_1343130241000.png]: /images/20220810/d4a45dc81503436f84828d135a5a367c.png
[dubbo-add-route.png-version_1_modificationDate_1343130241000.png]: /images/20220810/176eec55d4d744e5889aaed863de0120.png
[dubbo-add-config.png-version_1_modificationDate_1343130245000.png]: /images/20220810/95503795d9ce452baa675981285ad691.png