nrf51822 如何更改发射功率

以你之姓@ 2022-08-09 06:26 7阅读 0赞

当使用softdevice时，可以调用函数：**sd\_ble\_gap\_tx\_power\_set**

uint32_t sd_ble_gap_tx_power_set(int8_t 	tx_power)	
    Set the radio's transmit power.
    
    Parameters
    [in]	tx_power	Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm).
    Note
    -40 dBm will not actually give -40 dBm, but will instead be remapped to -30 dBm.
    Returns
    NRF_SUCCESS Successfully changed the transmit power.
    NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
    NRF_ERROR_BUSY The stack is busy, process pending events and retry.

使用这个函数可以随时随地的更改发射功率，即使已经开始了广播。

在gap\_params\_init() 函数中调用！！或者在需要的地方调用！！！

/**@brief Function for the GAP initialization.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 * device including the device name, appearance, and the preferred connection parameters.
 */
 static void gap_params_init(void)
 {
 uint32_t err_code;
 ble_gap_conn_params_t gap_conn_params;
 ble_gap_conn_sec_mode_t sec_mode;
 
 BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
 
 err_code = sd_ble_gap_device_name_set(&sec_mode,
 (const uint8_t *)DEVICE_NAME,
 strlen(DEVICE_NAME));
 APP_ERROR_CHECK(err_code);
 
 err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_KEYRING);
 APP_ERROR_CHECK(err_code);
 
 memset(&gap_conn_params, 0, sizeof(gap_conn_params));
 
 gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
 gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
 gap_conn_params.slave_latency = SLAVE_LATENCY;
 gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
 
 err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
 APP_ERROR_CHECK(err_code);
 
 err_code = sd_ble_gap_tx_power_set(TX_POWER_LEVEL);
 APP_ERROR_CHECK(err_code);
 }