Linux下长时间ping网络加时间戳并记录到文本

逃离我推掉我的手 2022-07-11 12:11 266阅读 0赞

root@test ~\]\# **ping 192.168.2.1 -c 10 | awk '\{ print $0"\\t" strftime("%H:%M:%S",systime()) \} '**  
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:30:21  
64 bytes from 192.168.2.1: icmp\_seq=1 ttl=64 time=0.436 ms    10:30:21  
64 bytes from 192.168.2.1: icmp\_seq=2 ttl=64 time=0.343 ms    10:30:22  
64 bytes from 192.168.2.1: icmp\_seq=3 ttl=64 time=0.368 ms    10:30:23  
64 bytes from 192.168.2.1: icmp\_seq=4 ttl=64 time=0.280 ms    10:30:24  
64 bytes from 192.168.2.1: icmp\_seq=5 ttl=64 time=0.308 ms    10:30:25  
64 bytes from 192.168.2.1: icmp\_seq=6 ttl=64 time=0.360 ms    10:30:26  
64 bytes from 192.168.2.1: icmp\_seq=7 ttl=64 time=0.319 ms    10:30:27  
64 bytes from 192.168.2.1: icmp\_seq=8 ttl=64 time=0.274 ms    10:30:28  
64 bytes from 192.168.2.1: icmp\_seq=9 ttl=64 time=0.360 ms    10:30:29  
64 bytes from 192.168.2.1: icmp\_seq=10 ttl=64 time=0.265 ms    10:30:30  
    10:30:30  
\--- 192.168.2.1 ping statistics ---    10:30:30  
10 packets transmitted, 10 received, 0% packet loss, time 9000ms    10:30:30  
rtt min/avg/max/mdev = 0.265/0.331/0.436/0.052 ms    10:30:30  
然后我们把信息输出到文本：  
\[root@test ~\]\# **ping 192.168.2.1 -c 10 | awk '\{ print $0"\\t" strftime("%H:%M:%S",systime()) \} '>ping.log**  
\[root@test ~\]\# cat ping.log  
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:37:23  
64 bytes from 192.168.2.1: icmp\_seq=1 ttl=64 time=0.398 ms    10:37:23  
64 bytes from 192.168.2.1: icmp\_seq=2 ttl=64 time=0.288 ms    10:37:24  
64 bytes from 192.168.2.1: icmp\_seq=3 ttl=64 time=0.465 ms    10:37:25  
64 bytes from 192.168.2.1: icmp\_seq=4 ttl=64 time=0.310 ms    10:37:26  
64 bytes from 192.168.2.1: icmp\_seq=5 ttl=64 time=0.275 ms    10:37:27  
64 bytes from 192.168.2.1: icmp\_seq=6 ttl=64 time=0.247 ms    10:37:28  
64 bytes from 192.168.2.1: icmp\_seq=7 ttl=64 time=0.339 ms    10:37:29  
64 bytes from 192.168.2.1: icmp\_seq=8 ttl=64 time=0.270 ms    10:37:30  
64 bytes from 192.168.2.1: icmp\_seq=9 ttl=64 time=0.297 ms    10:37:31  
64 bytes from 192.168.2.1: icmp\_seq=10 ttl=64 time=0.289 ms    10:37:32  
    10:37:32  
\--- 192.168.2.1 ping statistics ---    10:37:32  
10 packets transmitted, 10 received, 0% packet loss, time 9000ms    10:37:32  
rtt min/avg/max/mdev = 0.247/0.317/0.465/0.067 ms    10:37:32  
最后，我们需要把任务放到后台去：  
\[root@test ~\]\# **nohup ping 192.168.2.1 -c 10 | awk '\{ print $0"\\t" strftime("%H:%M:%S",systime()) \} '>ping1.log &**  
\[1\] 2616  
\[root@test ~\]\# ls  
anaconda-ks.cfg  check1.sh  Desktop  eygle.com  httpd  login  pass.conf  ping1.log  ping.log  test1.sh  test1.sh1  
\[root@test ~\]\# cat ping1.log   
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:40:22  
64 bytes from 192.168.2.1: icmp\_seq=1 ttl=64 time=0.373 ms    10:40:22  
64 bytes from 192.168.2.1: icmp\_seq=2 ttl=64 time=0.343 ms    10:40:23  
64 bytes from 192.168.2.1: icmp\_seq=3 ttl=64 time=0.335 ms    10:40:24  
64 bytes from 192.168.2.1: icmp\_seq=4 ttl=64 time=0.299 ms    10:40:25  
64 bytes from 192.168.2.1: icmp\_seq=5 ttl=64 time=0.372 ms    10:40:26  
64 bytes from 192.168.2.1: icmp\_seq=6 ttl=64 time=0.236 ms    10:40:27  
64 bytes from 192.168.2.1: icmp\_seq=7 ttl=64 time=0.394 ms    10:40:28  
64 bytes from 192.168.2.1: icmp\_seq=8 ttl=64 time=0.317 ms    10:40:29  
64 bytes from 192.168.2.1: icmp\_seq=9 ttl=64 time=0.490 ms    10:40:30  
64 bytes from 192.168.2.1: icmp\_seq=10 ttl=64 time=1.65 ms    10:40:31  
    10:40:31  
\--- 192.168.2.1 ping statistics ---    10:40:31  
10 packets transmitted, 10 received, 0% packet loss, time 9001ms    10:40:31  
rtt min/avg/max/mdev = 0.236/0.480/1.650/0.395 ms    10:40:31

注：**nohup ping 192.168.2.1 -c 10 | awk '\{ print $0"\\t" strftime("%Y-%m-%d %H:%M:%S",systime()) \} '>ping1.log 2>&1 &**

**这样每隔4K左右会打印到文件**

转自：[http://blog.csdn.net/gtlions/article/details/7974087][http_blog.csdn.net_gtlions_article_details_7974087]

[http_blog.csdn.net_gtlions_article_details_7974087]: http://blog.csdn.net/gtlions/article/details/7974087