【ironic 源码分析】manager 源码分析

小咪咪 2022-06-13 00:12 520阅读 0赞

***一. 文件 conductor/manager.py***

执行命令 ironic node-create -d pxe\_ipmitool -u $\{ironic\_node\_uuid\}

类ConductorManager中create\_node传入的参数可以得出：只有uuid, driver, provision\_state有值

boot_interface=<?>,chassis_id=<?>,clean_step=<?>,conductor_affinity=<?>,
    console_enabled=<?>,console_interface=<?>,created_at=<?>,deploy_interface=<?>,driver='pxe_ipmitool',
    driver_info=<?>,driver_internal_info=<?>,extra=<?>,id=<?>,inspect_interface=<?>,inspection_finished_at=<?>,
    inspection_started_at=<?>,instance_info=<?>,instance_uuid=<?>,last_error=<?>,maintenance=<?>,
    maintenance_reason=<?>,management_interface=<?>,name=<?>,network_interface=<?>,power_interface=<?>,
    power_state=<?>,properties=<?>,provision_state='available',provision_updated_at=<?>,raid_config=<?>,
    raid_interface=<?>,reservation=<?>,resource_class=<?>,storage_interface=<?>,target_power_state=<?>,
    target_provision_state=<?>,target_raid_config=<?>,updated_at=<?>,
    uuid=00000000-0000-0000-0000-000000000102,vendor_interface=<?>

@ check\_and\_update\_node\_interfaces:

@ 保存至数据库

node-update 差不多操作

***二. \_sync\_power\_states***

定期任务同步电源状态

条件满足的：

@ 节点map到conductor

@ 节点 maintenance: false

@ 节点 provision state非DEPLOYWAIT／CLEANWAIT

过滤掉一些出错的问题：

主要函数：

count = do_sync_power_state(
            task, self.power_state_sync_count[node_uuid])
            if count:
                  self.power_state_sync_count[node_uuid] = count
            else:
                  # don't bloat the dict with non-failing nodes
                  del self.power_state_sync_count[node_uuid]

2.1 函数 do\_sync\_power\_state,

@METRICS.timer('do_sync_power_state')
    def do_sync_power_state(task, count):
        省略
        
        # We will modify a node, so upgrade our lock and use reloaded node.
        # This call may raise NodeLocked that will be caught on upper level.
        task.upgrade_lock()
        node = task.node
    
        # Repeat all checks with exclusive lock to avoid races
        if node.power_state and node.power_state == power_state:
            # Node power state was updated to the correct value
            return 0
        elif node.provision_state in SYNC_EXCLUDED_STATES or node.maintenance:
            # Something was done to a node while a shared lock was held
            return 0
        elif node.power_state is None:
            # If node has no prior state AND we successfully got a state,
            # simply record that and send a notification.
            LOG.info("During sync_power_state, node %(node)s has no "
                     "previous known state. Recording current state '%(state)s'.",
                     {'node': node.uuid, 'state': power_state})
            node.power_state = power_state
            node.save()
            notify_utils.emit_power_state_corrected_notification(
                task, None)
            return 0
    
        if count > max_retries:
            handle_sync_power_state_max_retries_exceeded(task, power_state)
            return count
    
        if CONF.conductor.force_power_state_during_sync:
            LOG.warning("During sync_power_state, node %(node)s state "
                        "'%(actual)s' does not match expected state. "
                        "Changing hardware state to '%(state)s'.",
                        {'node': node.uuid, 'actual': power_state,
                         'state': node.power_state})
            try:
                # node_power_action will update the node record
                # so don't do that again here.
                utils.node_power_action(task, node.power_state)
            except Exception as e:
                LOG.error(
                    "Failed to change power state of node %(node)s "
                    "to '%(state)s', attempt %(attempt)s of %(retries)s.",
                    {'node': node.uuid,
                     'state': node.power_state,
                     'attempt': count,
                     'retries': max_retries})
        else:
            LOG.warning("During sync_power_state, node %(node)s state "
                        "does not match expected state '%(state)s'. "
                        "Updating recorded state to '%(actual)s'.",
                        {'node': node.uuid, 'actual': power_state,
                         'state': node.power_state})
            node.power_state = power_state
            node.save()
            notify_utils.emit_power_state_corrected_notification(
                task, old_power_state)
    
        return count

代码中省略1： 超过最大失败次数，节点变为maintenace mode并报告错误， 如果节点没有先前状态和driver info 不合法，异常InvalidParameterValue

主要函数为：power\_state = task.driver.power.get\_power\_state(task)

def get_power_state(self, task):
            """Get the current power state of the task's node.
    
            :param task: a TaskManager instance containing the node to act on.
            :returns: one of ironic.common.states POWER_OFF, POWER_ON or ERROR.
            :raises: InvalidParameterValue if required ipmi parameters are missing.
            :raises: MissingParameterValue if a required parameter is missing.
            :raises: IPMIFailure on an error from ipmitool (from _power_status
                call).
    
            """
            driver_info = _parse_driver_info(task.node)
            return _power_status(driver_info)

主要根据配置文件ironic.conf中driver为ipmitool, 需要的driver\_info主要为ipmi\_address, 得到一堆driver\_info参数

def _power_status(driver_info):
        """Get the power status for a node.
    
        :param driver_info: the ipmitool access parameters for a node.
        :returns: one of ironic.common.states POWER_OFF, POWER_ON or ERROR.
        :raises: IPMIFailure on an error from ipmitool.
    
        """
        cmd = "power status"
        try:
            out_err = _exec_ipmitool(driver_info, cmd)
        except (exception.PasswordFileFailedToCreate,
                processutils.ProcessExecutionError) as e:
            LOG.warning("IPMI power status failed for node %(node_id)s with "
                        "error: %(error)s.",
                        {'node_id': driver_info['uuid'], 'error': e})
            raise exception.IPMIFailure(cmd=cmd)
    
        if out_err[0] == "Chassis Power is on\n":
            return states.POWER_ON
        elif out_err[0] == "Chassis Power is off\n":
            return states.POWER_OFF
        else:
            return states.ERROR

主要执行ipmitool命令得到power status, 返回主要有三种模式： POWER\_ON POWER\_OFF ERROR

***三. change\_node\_power\_state***

获得锁执行，设置target\_power\_state(POWER\_ON / POWER\_OFF)

最关键的函数创建一个协程进行处理

task.spawn_after(self._spawn_worker, utils.node_power_action,
                     task, new_state, timeout=power_timeout)

关键执行函数node\_power\_action: 过滤掉一些当前与目标状态一样的，主要代码如下：

# take power action
        try:
            if new_state != states.REBOOT:
                if ('timeout' in reflection.get_signature(
                        task.driver.power.set_power_state).parameters):
                    task.driver.power.set_power_state(task, new_state,
                                                      timeout=timeout)
                else:
                    # FIXME(naohirot):
                    # After driver composition, we should print power interface
                    # name here instead of driver.
                    LOG.warning(
                        "The set_power_state method of %(driver_name)s "
                        "doesn't support 'timeout' parameter.",
                        {'driver_name': node.driver})
                    task.driver.power.set_power_state(task, new_state)
            else:
                if ('timeout' in reflection.get_signature(
                        task.driver.power.reboot).parameters):
                    task.driver.power.reboot(task, timeout=timeout)
                else:
                    LOG.warning("The reboot method of %(driver_name)s "
                                "doesn't support 'timeout' parameter.",
                                {'driver_name': node.driver})
                    task.driver.power.reboot(task)

最终也是调用ipmitool power on / off reboot等

***四. do\_node\_deploy***

**def** **do\_node\_deploy** (task , conductor\_id , configdrive= None ):

1.1 \#调用驱动的部署模块的prepare方法，不同驱动的动作不一样 pxe\_\* 驱动使用的是iscsi\_deploy.ISCSIDeploy.prepare，

1.2 task.driver.deploy.deploy

开始部署节点，获取实例镜像从glance,写入到本地，重启物理机，

返回状态DEPLOYWAIT

基本执行完等待物理机上电，执行启动脚本

1.1。 **def**  **prepare** ( self , task):

位置： iscsi\_deploy.py  为PXE部署和用户镜像产生TFTP配置，从Glance获取TFTP镜像，加到本地缓存

1.1.1 node\_power\_action

1.1.2 unconfigure\_tenant\_networks unbind port 从neutron

1.1.3 add\_provisioning\_network 为节点添加网络

1.1.4 build\_agent\_options

返回  agent\_config\_opts = \{

'ipa-api-url' : get\_ironic\_api\_url() ,

\# NOTE: The below entry is a temporary workaround for bug/1433812

'coreos.configdrive' : 0 ,

1.1.5 prepare\_ramdisk

1.1.1 **def** **node\_power\_action** (task , new\_state , timeout= None ):

改变电源状态或者重置节点

@ 状态POWER\_ON,REBOOT,SOFT\_REBOOT -> POWER\_ON

@ 状态POWER\_OFF,SOFT\_POWER\_OFF -> POWER\_OFF

1.1.5 **def** **prepare\_ramdisk** ( self , task , ramdisk\_params):

从driver\_info和instance\_info读取相关信息，准备kernel/ramdisk

@ 得到dhcp\_opts更新DHCP, 其中dhcp\_opts大致如下：

dhcp\_opts: \[\{'opt\_value': 'pxelinux.0', 'ip\_version': 4, 'opt\_name': 'bootfile-name'\}, \{'opt\_value': '/tftpboot/', 'ip\_version': 4, 'opt\_name': '210'\}, \{'opt\_value': '10.248.128.234', 'ip\_version': 4, 'opt\_name': 'server-ip-address'\}, \{'opt\_value': '10.248.128.234', 'ip\_version': 4, 'opt\_name': 'tftp-server'\}\]

@ \_get\_deploy\_image\_info 得到deploy\_kernel deploy\_ramdisk 绝对路径

\{'deploy\_ramdisk': ('edfa4240-9cd9-41e0-baa4-82cb581c617e', '/tftpboot/00000000-0000-0000-0000-000000000102/deploy\_ramdisk'), 'deploy\_kernel': ('e9905ded-c7e7-4d5f-94ee-97fa2d7d15b1', '/tftpboot/00000000-0000-0000-0000-000000000102/deploy\_kernel')\}

@ \_build\_pxe\_config\_options PXE配置

pxe\_opts: \{'ipa-api-url': 'http://10.248.128.234:6385', 'ari\_path': 'no\_ramdisk', 'deployment\_ari\_path': '00000000-0000-0000-0000-000000000102/deploy\_ramdisk', 'pxe\_append\_params': 'nofb nomodeset vga=normal console=tty0 console=ttyS0,115200n8 ipa-debug=1', 'aki\_path': 'no\_kernel', 'deployment\_aki\_path': '00000000-0000-0000-0000-000000000102/deploy\_kernel', 'tftp\_server': '10.248.128.234', 'ipxe\_timeout': 0, 'coreos.configdrive': 0\}

@ try\_set\_boot\_device 设置boot

@ \_cache\_ramdisk\_kernel

cache image

***五. continue\_deploy***

物理机上电后，执行ramdisk，然后启动IPA, 大致如下：

@ 向ironic发送lookup请求，获取节点UUID

@ 发送心跳包

@ 部署后停止心跳包

没有细读ironic-python-agent代码：

def run(self):
            """Run the Ironic Python Agent."""
            。。。。。。。。。。。。。
            if not self.standalone:
                # Inspection should be started before call to lookup, otherwise
                # lookup will fail due to unknown MAC.
                uuid = None
                if cfg.CONF.inspection_callback_url:
                    uuid = inspector.inspect()
    
                if self.api_url:
                    self._wait_for_interface()
                    content = self.api_client.lookup_node(
                        hardware_info=hardware.dispatch_to_managers(
                            'list_hardware_info'),
                        timeout=self.lookup_timeout,
                        starting_interval=self.lookup_interval,
                        node_uuid=uuid)
    
                    LOG.debug('Received lookup results: %s', content)
                    self.node = content['node']
                    LOG.info('Lookup succeeded, node UUID is %s',
                             self.node['uuid'])
                    hardware.cache_node(self.node)
                    self.heartbeat_timeout = content['config']['heartbeat_timeout']
    
                    # Update config with values from Ironic
                    config = content.get('config', {})
                    if config.get('metrics'):
                        for opt, val in config.items():
                            setattr(cfg.CONF.metrics, opt, val)
                    if config.get('metrics_statsd'):
                        for opt, val in config.items():
                            setattr(cfg.CONF.metrics_statsd, opt, val)
                elif cfg.CONF.inspection_callback_url:
                    LOG.info('No ipa-api-url configured, Heartbeat and lookup '
                             'skipped for inspector.')
                else:
                    LOG.error('Neither ipa-api-url nor inspection_callback_url'
                              'found, please check your pxe append parameters.')
    
            if netutils.is_ipv6_enabled():
                # Listens to both IP versions, assuming IPV6_V6ONLY isn't enabled,
                # (the default behaviour in linux)
                simple_server.WSGIServer.address_family = socket.AF_INET6
            wsgi = simple_server.make_server(
                self.listen_address.hostname,
                self.listen_address.port,
                self.api,
                server_class=simple_server.WSGIServer)
    
            if not self.standalone and self.api_url:
                # Don't start heartbeating until the server is listening
                self.heartbeater.start()
    
            try:
                wsgi.serve_forever()
            except BaseException:
                LOG.exception('shutting down')
    
            if not self.standalone and self.api_url:
                self.heartbeater.stop()

***5.0 beartbeat***

位置：drivers/modules/agent\_base\_vendor.py

如果node的provision\_state 为 DEPLOYWAIT 并且已经不是started 则调用5.1 continue\_deploy

DEPLOYWAIT 并且镜像已经下载完，部署完成则5.2 reboot\_to\_instance

driver\_internal\_info: \{'agent\_url': u'http://$ip:9999', u'is\_whole\_disk\_image': True\}

默认端口为9999

def heartbeat(self, task, callback_url):
        """Process a heartbeat. :param task: task to work with. :param callback_url: agent HTTP API URL. """ # TODO(dtantsur): upgrade lock only if we actually take action other # than updating the last timestamp.
        task.upgrade_lock()
    
        node = task.node
        LOG.debug('Heartbeat from node %s', node.uuid)
    
        driver_internal_info = node.driver_internal_info
        driver_internal_info['agent_url'] = callback_url
    
        # TODO(rloo): 'agent_last_heartbeat' was deprecated since it wasn't # being used so remove that entry if it exists.
        # Hopefully all nodes will have been updated by Pike, so
        # we can delete this code then.
        driver_internal_info.pop('agent_last_heartbeat', None)
    
        node.driver_internal_info = driver_internal_info
        node.save()
    
        # Async call backs don't set error state on their own
        # TODO(jimrollenhagen) improve error messages here msg = _('Failed checking if deploy is done.')
        try:
            if node.maintenance:
                # this shouldn't happen often, but skip the rest if it does.
                LOG.debug('Heartbeat from node %(node)s in maintenance mode; '
                          'not taking any action.', {
       'node': node.uuid})
                return elif (node.provision_state == states.DEPLOYWAIT and not self.deploy_has_started(task)):
                msg = _('Node failed to deploy.')
                self.continue_deploy(task)
            elif (node.provision_state == states.DEPLOYWAIT and self.deploy_is_done(task)):
                msg = _('Node failed to move to active state.')
                self.reboot_to_instance(task)
            elif (node.provision_state == states.DEPLOYWAIT and self.deploy_has_started(task)):
                node.touch_provisioning()
            elif node.provision_state == states.CLEANWAIT:
                node.touch_provisioning()
                if not node.clean_step:
                    LOG.debug('Node %s just booted to start cleaning.',
                              node.uuid)
                    msg = _('Node failed to start the first cleaning step.')
                    # First, cache the clean steps
                    self.refresh_clean_steps(task)
                    # Then set/verify node clean steps and start cleaning
                    manager_utils.set_node_cleaning_steps(task)
                    # The exceptions from RPC are not possible as we using cast
                    # here
                    _notify_conductor_resume_clean(task)
                else:
                    msg = _('Node failed to check cleaning progress.')
                    self.continue_cleaning(task)

***5.1 continue\_deploy函数***

def continue_deploy(self, task):
        """Method invoked when deployed using iSCSI. This method is invoked during a heartbeat from an agent when the node is in wait-call-back state. This deploys the image on the node and then configures the node to boot according to the desired boot option (netboot or localboot). :param task: a TaskManager object containing the node. :param kwargs: the kwargs passed from the heartbeat method. :raises: InstanceDeployFailure, if it encounters some error during the deploy. """ task.process_event('resume')
        node = task.node
        LOG.debug('Continuing the deployment on node %s', node.uuid)
    
        uuid_dict_returned = do_agent_iscsi_deploy(task, self._client)
        root_uuid = uuid_dict_returned.get('root uuid')
        efi_sys_uuid = uuid_dict_returned.get('efi system partition uuid')
        self.prepare_instance_to_boot(task, root_uuid, efi_sys_uuid)
        self.reboot_and_finish_deploy(task)

最终调用ipmitool命令如下格式

ipmitool -I lanplus -H $ip -L ADMINISTRATOR -p 623  -U $user -R 120 -N 5 -f /tmp/tmp83ANKp power status

ipmitool -I lanplus -H $ip -L ADMINISTRATOR -p 623  -U $user -R 120 -N 5 -f /tmp/tmp83ANKp power on

# Ironic的服务 #

1.  ironic-api: 接收REST请求，送给ironic-conductor
2.  ironic-conductor: 接收来自ironic-API的请求，进行创建、更新、删除nodes， 通过IPMI、ssh开关电源，或者部署机器
3.  ironic-python-agent: 当一台bare metal服务启动时，如果从PXE启动，机器可以从远端拉取一个最小版的Linux内核，也可以拉取一个ramdisk，  
    如果是ramdisk的话，可以在上面安装各种服务（也可以配置RAID），其中可以包括ironic-python-agent。在ramdisk中的ironic-python-agent提供和ironic-conductor一样的服务。
4.  ironicclient: Ironic CLI