双master+heartbeat实现自动切换

谁践踏了优雅 2022-06-10 12:46 170阅读 0赞

author:skate  
time:2012/07/12

**双master+heartbeat实现自动切换**

heartbeat主要是主机故障切换，服务故障不切换，如要服务故障切换就需要自己写脚本检测服务的状态，如果服务异常则调用heartbeat切换脚本完成切换

环境：  
os：rht5.2  
mysql：percona5.5  
heartbeat：2.1.3

1.首先在双机上安装mysql软件  
参考：[http://blog.csdn.net/wyzxg/article/details/7695663][http_blog.csdn.net_wyzxg_article_details_7695663]

master1.skate.com的my.cnf添加如下配置

server-id       = 1  
log\_bin=/data/mysql/binlog/master\_binlog.log  
binlog-do-db=skate  
log\_slave\_updates=1  
auto\_increment\_increment=2  
auto\_increment\_offset=1  
binlog\_format=mixed  
expire\_logs\_days=7

master2.skate.com的my.cnf添加如下配置

server-id       = 2  
log\_bin=/data/mysql/binlog/master\_binlog.log  
binlog-do-db=skate  
log\_slave\_updates=1  
auto\_increment\_increment=2  
auto\_increment\_offset=1  
binlog\_format=mixed  
expire\_logs\_days=7

创建复制帐户  
mysql>GRANT REPLICATION SLAVE ON \*.\* TO ['rep'@'%'][rep] IDENTIFIED BY 'rep';

2.然后在线创建slave  
参考：[http://www.percona.com/doc/percona-xtrabackup/howtos/setting\_up\_replication.html][http_www.percona.com_doc_percona-xtrabackup_howtos_setting_up_replication.html]

3.创建好slave后，检测其正常；  
为了保证数据一致性，首先在slave上运行  
mysql> FLUSH TABLES WITH READ LOCK; //这个会阻塞slave的同步  
mysql> show master status;

4.  
因为这个时候slave全库锁住，不会被更新，然后在master运行  
mysql> stop slave;  
mysql> CHANGE MASTER TO  
    ->     MASTER\_HOST='master2.skate.com',  
    ->     MASTER\_USER='rep',  
    ->     MASTER\_PASSWORD='rep',  
    ->     MASTER\_PORT=3306,  
    ->     MASTER\_LOG\_FILE='master-bin.001',  //在slave看到信息  
    ->     MASTER\_LOG\_POS=4;                  //在slave看到信息  
   
mysql> start slave;  
mysql> show slave status\\G;

最后在slave山解锁  
mysql> unlock tables;

**到目前为止 双master以及配置完，下面配置heartbeat实现故障自动切换**

环境说明  
vip：192.168.211.163  
master1：eth0/192.168.211.127 对外  
                   eth1/172.16.0.11     心跳  
master2：192.168.211.199      对外  
                   eth1/172.16.0.12     心跳  
    
需要关注修改如下文件：  
/etc/hosts  
/etc/host.conf  
/etc/resolv.conf  
/etc/sysconfig/network  
/etc/sysconfig/network-scripts/ifcfg-eth0  
/etc/sysconfig/network-scripts/ifcfg-eth1

master1的hosts  
\[root@master1 mysql\]\# more /etc/hosts  
\# Do not remove the following line, or various programs  
\# that require network functionality will fail.  
127.0.0.1 master1.skate.com master1 loalhost.localdomain localhost  
192.168.211.127 master1.skate.com  
192.168.211.199 master2.skate.com  
::1     localhost6.localdomain6 localhost6

master2的hosts  
\[root@master2 ~\]\# more /etc/hosts  
\# Do not remove the following line, or various programs  
\# that require network functionality will fail.  
127.0.0.1 master2.skate.com master2 loalhost.localdomain localhost  
192.168.211.127 master1.skate.com  
192.168.211.199 master2.skate.com  
::1     localhost6.localdomain6 localhost6

master1和master2的host.conf  
\# more /etc/host.conf  
order hosts,bind

master1和master2的resolv.conf  
\# more /etc/resolv.conf  
nameserver 202.106.0.20  
nameserver 202.106.196.115  
search localhost

master1的network  
\[root@master1 mysql\]\# more /etc/sysconfig/network  
NETWORKING=yes  
NETWORKING\_IPV6=no  
HOSTNAME=master1.skate.com  
GATEWAY="192.168.211.1"  
GATEWAY="eth0" //网关使用的网卡  
ONBOOT=YES  
FORWARD\_IPV4="yes"

master2的network  
\[root@master2 ~\]\# more /etc/sysconfig/network  
NETWORKING=yes  
NETWORKING\_IPV6=no  
HOSTNAME=master2.skate.com  
GATEWAY="192.168.211.1"  
GATEWAY="eth0"  //网关使用的网卡  
ONBOOT=YES  
FORWARD\_IPV4="yes"

master1的ifcfg-eth0  
\[root@master1 mysql\]\# more /etc/sysconfig/network-scripts/ifcfg-eth0  
\# Intel Corporation 82540EM Gigabit Ethernet Controller  
DEVICE=eth0  
ONBOOT=yes  
BOOTPROTO=none  
HWADDR=08:00:27:3e:3e:09  
NETMASK=255.255.255.0  
IPADDR=192.168.211.127  
GATEWAY=192.168.211.1  
TYPE=Ethernet

\[root@master1 mysql\]\# more /etc/sysconfig/network-scripts/ifcfg-eth1  
\# Intel Corporation 82540EM Gigabit Ethernet Controller  
DEVICE=eth1  
ONBOOT=yes  
BOOTPROTO=none  
HWADDR=08:00:27:9a:96:11  
TYPE=Ethernet  
NETMASK=255.255.255.0  
IPADDR=172.16.0.11  
USERCTL=no  
IPV6INIT=no  
PEERDNS=yes

master2的ifcfg-eth0  
\[root@master2 ~\]\# more /etc/sysconfig/network-scripts/ifcfg-eth0  
\# Intel Corporation 82540EM Gigabit Ethernet Controller  
DEVICE=eth0  
BOOTPROTO=none  
HWADDR=08:00:27:a8:84:fc  
ONBOOT=yes  
TYPE=Ethernet  
USERCTL=no  
IPV6INIT=no  
PEERDNS=yes  
NETMASK=255.255.255.0  
IPADDR=192.168.211.199  
GATEWAY=192.168.211.1

\[root@master2 ~\]\# more /etc/sysconfig/network-scripts/ifcfg-eth1  
\# Intel Corporation 82540EM Gigabit Ethernet Controller  
DEVICE=eth1  
ONBOOT=yes  
BOOTPROTO=none  
HWADDR=08:00:27:38:98:26  
NETMASK=255.255.255.0  
IPADDR=172.16.0.12  
TYPE=Ethernet  
USERCTL=no  
IPV6INIT=no  
PEERDNS=yes

检测各自的主机名；ping对方的机器名称

\[root@master2 ~\]\# uname -n  
master2.skate.com  
\[root@master2 ~\]\# ping master1.skate.com  
PING master1.skate.com (192.168.211.127) 56(84) bytes of data.  
64 bytes from master1.skate.com (192.168.211.127): icmp\_seq=1 ttl=64 time=0.551 ms

主机已经配置完，下面开始安装heartbeat和依赖包

1.  
master1和master2分别安装  
\# yum install heartbeat  
\# yum install ipvsadm  
\# yum install libnet

heartbeat有三个配置文件：  
  — ha.cf  
  — authkyes  
  — haresources

\[root@master1 mysql\]\# cd  /usr/share/doc/heartbeat-2.1.3/  
\[root@master1 heartbeat-2.1.3\]\# cp ha.cf /etc/ha.d/  
\[root@master1 heartbeat-2.1.3\]\# cp haresources /etc/ha.d/  
\[root@master1 heartbeat-2.1.3\]\# cp authkeys /etc/ha.d/

2.  
首先配置ha.cf（两个节点一样的）  
\[root@master1 ha.d\]\# pwd  
/etc/ha.d  
\[root@master1 ha.d\]\# more ha.cf  
logfile /var/log/ha-log   \#ha的日志文件记录位置。如没有该目录，则需要手动添加  
logfacility local0       \#这个是设置heartbeat的日志，这里是用的系统日志  
keepalive 2             \#多长时间检测一次，设定心跳(监测)时间时间为2秒  
warntime 4              \#连续多长时间联系不上后开始警告提示  
deadtime 20             \#连续多长时间联系不上后认为对方挂掉了（单位是秒）  
initdead 60            \#这里主要是给重启后预留的一段忽略时间段（比如：重启后启动网络等，如果在网络还没有通，keepalive检测肯定通不过，但这时候并不能切换）  
\#采用eth1的udp广播用来发送心跳信息  
\#bcast eth1  
\#采用网卡eth1的udp单播来通知心跳，ip应为对方IP，建议采用单播。当一个网段有多台这样cluster话，则一定要采用单播，否则每组cluster都会看到对方的节点，从而报错。  
\#ucast eth1 172.16.0.12  
\#\#使用udp端口694 进行心跳监测  
udpport 694  
auto\_failback off    \#恢复正常后是否需要再自动切换回来，一般都设为off。  
\#\#节点1的HOSTNAME，必须要与 uname -n 指令得到的结果一致。  
node master1.skate.com  
\#\#节点2的HOSTNAME  
node master1.skate.com  
\#\#通过ping 网关来监测心跳是否正常  
ping 172.16.0.12  
hopfudge 1  
\#ping确定节点dead时间  
deadping 10  
\#指定和heartbeat一起启动、关闭的进程  
respawn hacluster /usr/lib/heartbeat/ipfail  
apiauth ipfail gid=haclient uid=hacluster  
\#是否采用v2 style模式，在三节点以上时一定要打开  
\#crm on

3.  
编辑双机互联验证文件：authkeys  
\[root@master1 ha.d\]\# more authkeys  
auth 1  
1 crc  
\[root@master1 ha.d\]\# chmod 600 authkeys    //authkeys的权限一定要是600

4.  
编辑集群资源文件：haresources (切换时备机需要做的事情)

\[root@master1 ha.d\]\# more haresources  
\#node-name resource1 resource2 ... resourceN  
master1.skate.com 192.168.211.163 test

\#其中,192.168.211.163为VIP，这里test这个脚本一定需要，没有这个脚本，heartbeat是无法运行的，脚本完成切换所需要的动作。因为我这个是双master结构的，切换时只需要切换vip即可

\[root@master1 ha.d\]\# more /etc/init.d/test  
\#!/bin/bash

echo "" $ > /dev/null

如果是master/slave结构的，这test脚本就要完成在start时将slave变成master。在stop时将master变成slave

建议还是采用heartbeat+双master模式,这样将数据丢失降到最低。采用innodb存储引擎，并且设置innodb\_flush\_log\_at\_trx\_commit = 1，这使得几乎每个提交的事务都能记录在 ib\_logfile\* 中，在secondary节点上能得到恢复，减小损失

5.  
测试  
A.拔掉心跳网线，模拟网络故障  
B.shutdown主机，模拟主机宕机  
C.主机掉电，模拟故障  
D.手动切换，调用脚本“/usr/lib/heartbeat/hb\_standby”，让heartbeat通知对方节点自己请求变成standby节点。vip漂移到对方节点上

如果mysql服务有问题，主机是正常的，目前的环境是无法切换的。我们可以自己写脚本

cat /usr/local/mysql/bin/moniter.sh  
\#!/bin/bash  
mysql\_path=/usr/local/mysql/bin/  
user="root"  
password="skate"  
logfile=/var/log/moniter.log  
date=\`(date +%y-%m-%d--%H:%M:%S)\`  
sleeptime=30  
ip=$(/sbin/ifconfig | grep "inet addr" | grep -v "127.0.0.1" | awk '\{print $2;\}' |awk -F':' '\{print $2;\}' |head -1)  
Slave\_IO\_Running=$(mysql -u$user -p$password -e 'show slave status\\G' |grep "Slave\_IO\_Running" | awk '\{print $2\}')  
Slave\_SQL\_Running=$(mysql -u$user -p$password -e 'show slave status\\G' | grep "Slave\_SQL\_Running" | awk '\{print $2\}')

mysql -p$password -e "use test;"  
if \[\[ $? != 0 \]\]  
then  
/usr/share/heartbeat/hb\_standby  
echo "relase vip ,and become standby!!"  
\#报警脚本  
else  
echo "mysql is ok"  
fi

if \[ "$Slave\_IO\_Running" = "Yes" -a "$Slave\_SQL\_Running" = "Yes" \]  
then  
  echo "Slave is running!" >/dev/null  
else  
echo "\{$ip\}\_replicate error please fix it "  
\#报警脚本  
fi

**这样这个脚本就可以检测mysql服务故障并切换，还可以报警（根据自己的报警方式）**

6.维护  
启动和关闭heartbeat的方法：  
\# /etc/init.d/hearbeat start 或 service heartbeat start  
\# /etc/init.d/hearbeat stop  或 service heartbeat stop

\------end-------

[http_blog.csdn.net_wyzxg_article_details_7695663]: http://blog.csdn.net/wyzxg/article/details/7695663
[rep]: mailto:'%20rel=
[http_www.percona.com_doc_percona-xtrabackup_howtos_setting_up_replication.html]: http://www.percona.com/doc/percona-xtrabackup/howtos/setting_up_replication.html