devstack安装OpenStack Pike版本 (OVN+VLAN)

àì夳堔傛蜴生んèń 2022-06-02 08:15 242阅读 0赞

控制节点配置文件

#
    # Sample DevStack local.conf.
    #
    # This sample file is intended to be used for your typical DevStack environment
    # that's running all of OpenStack on a single host.  This can also be used as
    # the first host of a multi-host test environment.
    #
    # No changes to this sample configuration are required for this to work.
    #
    
    [[local|localrc]]
    
    DATABASE_PASSWORD=password
    RABBIT_PASSWORD=password
    SERVICE_PASSWORD=password
    SERVICE_TOKEN=password
    ADMIN_PASSWORD=password
    
    # The DevStack plugin defaults to using the ovn branch from the official ovs
    # repo.  You can optionally use a different one.  For example, you may want to
    # use the latest patches in blp's ovn branch:
    #OVN_REPO=https://github.com/blp/ovs-reviews.git
    #OVN_BRANCH=ovn
    
    enable_plugin networking-ovn https://git.openstack.org/openstack/networking-ovn
    enable_service ovn-northd
    enable_service ovn-controller
    enable_service networking-ovn-metadata-agent
    
    # Use Neutron instead of nova-network
    disable_service n-net
    enable_service q-svc
    
    # Disable Neutron agents not used with OVN.
    disable_service q-agt
    disable_service q-l3
    disable_service q-dhcp
    disable_service q-meta
    
    # Horizon (the web UI) is enabled by default. You may want to disable
    # it here to speed up DevStack a bit.
    enable_service horizon
    #disable_service horizon
    
    # Cinder (OpenStack Block Storage) is disabled by default to speed up
    # DevStack a bit. You may enable it here if you would like to use it.
    disable_service cinder c-sch c-api c-vol
    #enable_service cinder c-sch c-api c-vol
    
    # How to connect to ovsdb-server hosting the OVN NB database.
    #OVN_NB_REMOTE=tcp:$SERVICE_HOST:6641
    
    # How to connect to ovsdb-server hosting the OVN SB database.
    #OVN_SB_REMOTE=tcp:$SERVICE_HOST:6642
    
    # A UUID to uniquely identify this system.  If one is not specified, a random
    # one will be generated and saved in the file 'ovn-uuid' for re-use in future
    # DevStack runs.
    #OVN_UUID=
    
    # If using the OVN native layer-3 service, choose a router scheduler to
    # manage the distribution of router gateways on hypervisors/chassis.
    # Default value is leastloaded.
    #OVN_L3_SCHEDULER=leastloaded
    
    # Whether or not to build custom openvswitch kernel modules from the ovs git
    # tree. This is enabled by default.  This is required unless your distro kernel
    # includes ovs+conntrack support.  This support was first released in Linux 4.3,
    # and will likely be backported by some distros.
    #OVN_BUILD_MODULES=False
    
    # Enable services, these services depend on neutron plugin.
    #enable_plugin neutron https://git.openstack.org/openstack/neutron
    #enable_service q-qos
    #enable_service q-trunk
    
    # Skydive
    #enable_plugin skydive https://github.com/redhat-cip/skydive.git
    #enable_service skydive-analyzer
    #enable_service skydive-agent
    
    # If you want to enable a provider network instead of the default private
    # network after your DevStack environment installation, you *must* set
    # the Q_USE_PROVIDER_NETWORKING to True, and also give FIXED_RANGE,
    # NETWORK_GATEWAY and ALLOCATION_POOL option to the correct value that can
    # be used in your environment. Specifying Q_AGENT is needed to allow devstack
    # to run various "ip link set" and "ovs-vsctl" commands for the provider
    # network setup.
    #Q_AGENT=openvswitch
    #Q_USE_PROVIDER_NETWORKING=True
    #PHYSICAL_NETWORK=providernet
    #PROVIDER_NETWORK_TYPE=flat
    #PUBLIC_INTERFACE=<public interface>
    #OVS_PHYSICAL_BRIDGE=br-provider
    #PROVIDER_SUBNET_NAME=provider-subnet
    # use the following for IPv4
    #IP_VERSION=4
    #FIXED_RANGE=<CIDR for the Provider Network>
    #NETWORK_GATEWAY=<Provider Network Gateway>
    #ALLOCATION_POOL=<Provider Network Allocation Pool>
    # use the following for IPv4+IPv6
    #IP_VERSION=4+6
    #FIXED_RANGE=<CIDR for the Provider Network>
    #NETWORK_GATEWAY=<Provider Network Gateway>
    #ALLOCATION_POOL=<Provider Network Allocation Pool>
    # IPV6_PROVIDER_FIXED_RANGE=<v6 CDIR for the Provider Network>
    # IPV6_PROVIDER_NETWORK_GATEWAY=<v6 Gateway for the Provider Network>
    
    # If you wish to use the provider network for public access to the cloud,
    # set the following
    #Q_USE_PROVIDERNET_FOR_PUBLIC=True
    #PUBLIC_NETWORK_NAME=<Provider network name>
    #PUBLIC_NETWORK_GATEWAY=<Provider network gateway>
    #PUBLIC_PHYSICAL_NETWORK=<Provider network name>
    #IP_VERSION=4
    #PUBLIC_SUBNET_NAME=<provider subnet name>
    #Q_FLOATING_ALLOCATION_POOL=<Provider Network Allocation Pool>
    #FLOATING_RANGE=<CIDR for the Provider Network>
    
    # NOTE: DO NOT MOVE THESE SECTIONS FROM THE END OF THIS FILE
    # IF YOU DO, THEY WON'T WORK!!!!!
    #
    
    # Enable Nova automatic host discovery for cell every 2 seconds
    # Only needed in case of multinode devstack, as otherwise there will be issues
    # when the 2nd compute node goes online.
    [[post-config|$NOVA_CONF]]
    [scheduler]
    discover_hosts_in_cells_interval = 2

计算节点

#
    # Sample DevStack local.conf.
    #
    # This sample file is intended to be used when adding an additional compute node
    # to your test environment.  It runs a very minimal set of services.
    #
    # For this configuration to work, you *must* set the SERVICE_HOST option to the
    # IP address of the main DevStack host.  You must also set HOST_IP to the IP
    # address of this host.
    #
    
    [[local|localrc]]
    
    DATABASE_PASSWORD=password
    RABBIT_PASSWORD=password
    SERVICE_PASSWORD=password
    SERVICE_TOKEN=password
    ADMIN_PASSWORD=password
    
    # The DevStack plugin defaults to using the ovn branch from the official ovs
    # repo.  You can optionally use a different one.  For example, you may want to
    # use the latest patches in blp's ovn branch:
    #OVN_REPO=https://github.com/blp/ovs-reviews.git
    #OVN_BRANCH=ovn
    
    enable_plugin networking-ovn https://git.openstack.org/openstack/networking-ovn
    
    disable_all_services
    enable_service n-cpu
    enable_service placement-api
    enable_service ovn-controller
    
    # Set this to the address of the main DevStack host running the rest of the
    # OpenStack services.
    SERVICE_HOST=<IP address of host running everything else>
    RABBIT_HOST=$SERVICE_HOST
    Q_HOST=$SERVICE_HOST
    
    # How to connect to ovsdb-server hosting the OVN SB database
    OVN_SB_REMOTE=tcp:$SERVICE_HOST:6642
    
    # A UUID to uniquely identify this system.  If one is not specified, a random
    # one will be generated and saved in the file 'ovn-uuid' for re-use in future
    # DevStack runs.
    #OVN_UUID=
    
    # Whether or not to build custom openvswitch kernel modules from the ovs git
    # tree. This is enabled by default.  This is required unless your distro kernel
    # includes ovs+conntrack support.  This support was first released in Linux 4.3,
    # and will likely be backported by some distros.
    #OVN_BUILD_MODULES=False
    
    HOST_IP=<IP address of current host>
    NOVA_VNC_ENABLED=True
    NOVNCPROXY_URL=http://$SERVICE_HOST:6080/vnc_auto.html
    VNCSERVER_LISTEN=$HOST_IP
    VNCSERVER_PROXYCLIENT_ADDRESS=$VNCSERVER_LISTEN
    
    # Skydive
    #enable_plugin skydive https://github.com/redhat-cip/skydive.git
    #enable_service skydive-agent
    
    # Provider Network
    # If you want to enable a provider network instead of the default private
    # network after your DevStack environment installation, you *must* set the
    # Q_USE_PROVIDER_NETWORKING to True, and give value to both PHYSICAL_NETWORK
    # and OVS_PHYSICAL_BRIDGE.
    #Q_USE_PROVIDER_NETWORKING=True
    #PHYSICAL_NETWORK=providernet
    #OVS_PHYSICAL_BRIDGE=br-provider
    #PUBLIC_INTERFACE=<public interface>