在ubuntu上安装机器学习模块

Bertha 。 2022-05-29 06:36 227阅读 0赞

里面包含了所有需要的包:

#define 这里只是定义了按回车，然后执行下一步的方法
    get_char()
    {
    SAVEDSTTY=`stty -g`
    stty -echo
    stty cbreak
    dd if=/dev/tty bs=1 count=1 2>/dev/null
    stty -raw
    stty echo
    stty $SAVEDSTTY
    }
    
    echo "[$(date)] - install start,Press any key to continue!"
    char=`get_char`
    
    #init
    sudo mv /etc/apt/sources.list /etc/apt/sources.list.old
    sudo cp sources.list /etc/apt/sources.list
    sudo apt-get update &&sudo apt-get dist-upgrade
    sudo apt-get install language-pack-zh-hans
    sudo apt-get install openssh-server
    sudo apt-get install build-essential
    sudo apt-get install make
    sudo apt-get install gcc
    sudo apt-get install g++
    sudo apt-get install libsdl-dev
    sudo apt-get install zip
    sudo apt-get install zlib1g-dev
    sudo apt-get install ethtool
    sudo apt-get install libglib2.0-dev
    sudo apt-get install mkisofs
    sudo apt-get install git
    sudo apt-get install dos2unix
    sudo apt-get install netpbm
    sudo apt-get install libarchive-zip-perl
    sudo apt-get install libxml-libxml-perl
    sudo apt-get install chkconfig python-dev
    sudo apt-get install libpixman-1-dev
    sudo apt-get install tshark
    sudo mv /etc/apt/sources.list.old  /etc/apt/sources.list
    echo "[$(date)] - init Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install python
    tar -zxvf Python-3.6.4.tgz
    cd Python-3.6.4
    ./configure
    make
    make install
    cd ..
    echo "[$(date)] - Python Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install numpy
    cd numpy
    unzip numpy-1.14.0.zip
    cd numpy-1.14.0
    python3 setup.py install
    cd ..
    cd ..
    echo "[$(date)] - numpy Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install jieba
    cd jieba
    unzip jieba-0.39.zip
    cd jieba-0.39
    python3 setup.py install
    cd ..
    cd ..
    echo "[$(date)] - jieba Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install pandas
    cd pandas
    pip3 install pytz-2017.2-py2.py3-none-any.whl
    pip3 install six-1.11.0-py2.py3-none-any.whl
    pip3 install python_dateutil-2.6.1-py2.py3-none-any.whl
    tar -zxvf pandas-0.22.0.tar.gz
    cd pandas-0.22.0
    python3 setup.py install
    cd ..
    cd ..
    echo "[$(date)] - pandas Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install scipy
    cd scipy
    pip3 install scipy-1.0.0-cp36-cp36m-manylinux1_x86_64.whl
    cd ..
    echo "[$(date)] - scipy Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install sklearn
    cd sklearn
    pip3 install scikit_learn-0.19.0-cp36-cp36m-manylinux1_x86_64.whl
    echo "[$(date)] - sklearn Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install gensim
    cd gensim
    dpkg -i libbz2-dev_1.0.6-1_amd64.deb
    cd ..
    cd Python-3.6.4
    make
    make install
    cd ..
    cd gensim
    pip3 install requests-2.10.0-py2.py3-none-any.whl
    tar -zxvf bz2file-0.98.tar.gz
    cd bz2file-0.98
    python3 setup.py install
    cd ..
    pip3 install boto-2.48.0-py2.py3-none-any.whl
    tar -zxvf smart_open-1.3.5.tar.gz
    cd smart_open-1.3.5
    cd ..
    cd ..
    echo "[$(date)] - gensim Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install tensorflow
    cd tensorflow
    pip3 install protobuf-3.4.0-cp36-cp36m-manylinux1_x86_64.whl
    pip3 install wheel-0.30.0-py2.py3-none-any.whl
    tar -zxvf html5lib-0.9999999.tar.gz
    cd html5lib-0.9999999
    python3 setup.py install
    cd ..
    pip3 install bleach-1.5.0-py2.py3-none-any.whl
    tar -zxvf Markdown-2.6.8.tar.gz
    cd Markdown-2.6.8
    python3 setup.py install
    cd ..
    tar -zxvf absl-py-0.1.9.tar.gz
    cd absl-py-0.1.9
    python3 setup.py install
    cd ..
    pip3 install Werkzeug-0.12.2-py2.py3-none-any.whl
    #pip3 install tensorflow_tensorboard-1.5.1-py3-none-any.whl
    pip3 install backports.weakref-1.0rc1-py3-none-any.whl
    pip3 install tensorflow-1.2.1-cp36-cp36m-manylinux1_x86_64.whl
    cd ..
    echo "[$(date)] - tensorflow Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install glibc17
    cd glibc17
    dpkg -i libc6_2.17-0ubuntu5_amd64.deb
    dpkg -i libc6-dev_2.17-0ubuntu5_amd64.deb
    dpkg -i libc-dev-bin_2.17-0ubuntu5_amd64.deb
    dpkg -i libnih1_1.0.3-4ubuntu16_amd64.deb
    dpkg -i libnih-dbus1_1.0.3-4ubuntu16_amd64.deb
    cd ..
    echo "[$(date)] - glibc17 Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #replace libstdc
    cp libstdc++.so.6.0.20 /usr/lib/x86_64-linux-gnu/
    rm /usr/lib/x86_64-linux-gnu/libstdc++.so.6
    ln -s /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.20 /usr/lib/x86_64-linux-gnu/libstdc++.so.6
    echo "[$(date)] - libstdc Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install tflearn
    cd tflearn
    tar -zxvf olefile-0.43.tar.gz
    cd olefile-0.43
    python3 setup.py install
    cd ..
    pip3 install Pillow-4.2.1-cp36-cp36m-manylinux1_x86_64.whl
    tar -zxvf tflearn-0.3.2.tar.gz
    cd tflearn-0.3.2
    python3 setup.py install
    cd ..
    cd ..
    echo "[$(date)] - tflearn Setup Finished,Press any key to continue!"
    char=`get_char`
    
    #install keras
    cd keras
    tar -zxvf PyYAML-3.12.tar.gz
    cd PyYAML-3.12
    python3 setup.py install
    cd ..
    pip3 install Keras-2.1.3-py2.py3-none-any.whl
    pip3 install h5py-2.7.0-cp36-cp36m-manylinux1_x86_64.whl
    cd ..
    echo "[$(date)] - keras Setup Finished,Press any key to continue!"
    char=`get_char`