JVM笔记

矫情吗；* 2022-05-28 10:22 253阅读 0赞

# 垃圾回收 #

## 1. 如何判断对象是垃圾对象？ ##

### 引用计数法 ###

> 在对象中添加一个引用计数器，当有地方引用这个对象的时候，引用计数器的值+1，当引用失效时，则值-1. 此方式不能解决循环引用的问题。

*  验证

> 添加gc日志，\_005GC.java -verbose:gc -XX:+PrintGCDetails  
> 发现hotspot不是使用此法。

### 可达性分析法 ###

> 对象根root不可达。

[![GCROOT.png][]][GCROOT.png]

*  可以作为GCroots的对象
    
     *  虚拟机栈
     *  方法区的类属性所引用的对象
     *  方法区中常量所引用的对象
     *  本地方法栈中引用的对象。

## 2.如何回收？ ##

### 回收策略 ###

#### 标记清除算法 ####

> 通过可达性算法，标记出垃圾对象,将存活对象复制到S区，标记区域清空。

*  效率问题

> 需要两步，先标记，后清除。

*  空间问题

> 空间碎片严重，空间不连续，创建大对象时，需要检索到合适空间。

#### 复制算法(新生代) ####

> 通过可达性算法，标记出垃圾对象,将存活对象复制到S区，标记区域清空可能是Eden，也可能是S0或S1的一个。 [![GCNewGen.png][]][GCNewGen.png]

*  堆
    
     *  新生代
        
         *  Eden 伊甸园
         *  Survivor 存活区
         *  Tenured Gen
     *  老年代
 *  方法区
 *  栈 本地方法栈 程序计数器

#### 标记整理(老年代) ####

> 先标记要回收的垃圾对象，将需要回收的垃圾对象向一端移动，然后统一回收。基本是划分出一个区域，如果里面有不需要回收的，移动出去，需要回收的移进来，完毕后，回收该区域。

#### 分代收集算法 ####

> 根据分代，选择不同的算法，即复制算法和标记整理算法的结合。

### 垃圾回收器 ###

#### Serial ####

*  最基本的，1.3前唯一的选择
 *  单线程，串行。现常用于客户端
    
    [![SerialGC.png][]][SerialGC.png]

### Parnew ###

[![ParNew.png][]][ParNew.png]

*  多线程收集器，可与CMS结合使用

### Parallel Scavenge(新生代) ###

*  复制算法
 *  多线程
 *  达到可控制吞吐量
 *  \-XX:MaxGCPauserMillis 垃圾收集器停顿时间

> 不是越小越好，越小可能回收的频率增高。比如原来10ms 设置为1 则会收集10次。

*  \-XX:GCTimeRatio 吞吐量大小

> 吞吐量：CPU用于运行用户代码的时间与CPU消耗总时间的比值。

吞吐量=(执行用户代码时间)/(执行用户代码时间+垃圾回收占用时间)

### cms(Concurrent Mark Sweep) ###

#### 工作过程 ####

*  初始标记
 *  并发标记
 *  重新标记
 *  并发清理

#### 优点 ####

*  并发收集
 *  低停顿

#### 缺点 ####

\-　占用大量cpu资源

*  无法处理浮动垃圾
 *  出现ConcurrentModeFailure
 *  空间碎片
 *  cms收集老年代，ParNew收集新生代。

### G1 ###

#### 历史 ####

> 2004年已经提出

#### 优势 ####

*  并行与并发。可以真正的不停止应用来收集垃圾。
 *  分代收集
 *  空间整合
 *  可预测的停顿

#### 步骤 ####

*  初始标记
 *  并发标记
 *  最终标记
 *  筛选标记

#### 与CMS比较 ####

> 两者占用cpu资源都比较高，都是低停顿。而G1是划分区域(Region)，即一块区域一块区域的，而传统的是整体划分了几个区域。

## 3.何时回收？ ##

## 内存分配 ##

## 内存分配策略 ##

### 优先分配到Eden ###

> 优先分配到eden，如果容量不满足则触发一次mingc，

### 大对象直接分配到老年代 ###

> 判定条件是eden区的一半，>=则晋升老年代 可以通过-XX:PretenureSizeThreshold=8M来设定阈值。

### 长期存活对象分配到老年代 ###

> 可以通过-XX:MaxTenuringThreshold=15来设置，默认15

### 空间分配担保 ###

> \-XX:HandlePromotionFailure

为了更好的适应不同程序的内存状况，对象年龄不是必须到达阈值才会进入老年代。 只要老年代的连续空间大于新生代对象总大小或者历次晋升的平均大小就会进行Minor GC，否则将进行Full GC。

### 动态对象年龄判断 ###

> 如果在Survivor空间中相同年龄所有对象大小的总和大于Survivor空间的一半，年龄大于或等于该年龄的对象就可以直接进入老年代

*  相关示意图
    
     *  堆空间 [![GCEden.png][]][GCEden.png]
     *  Metaspace
        
        [![Metaspace.png][]][Metaspace.png]

# 虚拟机工具 #

> jdk提供了很多工具，默认在bin目录中，基本都是依赖tools.jar文件。

## jps ##

> Java进程状态 类似linux的ps命令

*  本地虚拟机唯一Id lvmid local virtual machine id
 *  m 运行时传入主类的参数 入口传递的argument
 *  v虚拟机参数
 *  l 运行的主类全名或者包名

C:\Users\zdwljs>jps
    2256
    7376 RemoteMavenServer
    12584 Launcher
    4120 Jps
    9644
    
    C:\Users\zdwljs>jps -l
    12176 sun.tools.jps.Jps
    2256
    7376 org.jetbrains.idea.maven.server.RemoteMavenServer
    12584 org.jetbrains.jps.cmdline.Launcher
    9644
    
    
    C:\Users\zdwljs>jps -help
    usage: jps [-help]
           jps [-q] [-mlvV] [<hostid>]

## Jstat ##

> 类装载，内存，垃圾收集，jit编译信息。 [官方文档][Link 1]

C:\Users\zdwljs>jstat -help
    Usage: jstat -help|-options
           jstat -<option> [-t] [-h<lines>] <vmid> [<interval> [<count>]]
    
    Definitions:
      <option>      An option reported by the -options option
      <vmid>        Virtual Machine Identifier. A vmid takes the following form:
                         <lvmid>[@<hostname>[:<port>]]
                    Where <lvmid> is the local vm identifier for the target
                    Java virtual machine, typically a process id; <hostname> is
                    the name of the host running the target Java virtual machine;
                    and <port> is the port number for the rmiregistry on the
                    target host. See the jvmstat documentation for a more complete
                    description of the Virtual Machine Identifier.
      <lines>       Number of samples between header lines.
      <interval>    Sampling interval. The following forms are allowed:
                        <n>["ms"|"s"]
                    Where <n> is an integer and the suffix specifies the units as
                    milliseconds("ms") or seconds("s"). The default units are "ms".
      <count>       Number of samples to take before terminating.
      -J<flag>      Pass <flag> directly to the runtime system.

C:\Users\zdwljs>jstat -gcutil 7376
      S0     S1     E      O      M     CCS    YGC     YGCT    FGC    FGCT     GCT
      0.00   0.00   4.44   2.55  96.40  91.49     73    0.206    72    2.594    2.799

*  每隔1s执行一次，共监控10次。

C:\Users\zdwljs>jstat -gcutil 7376 1000 10
        S0     S1     E      O      M     CCS    YGC     YGCT    FGC    FGCT     GCT
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799
        0.00   0.00   5.69   2.55  96.40  91.49     73    0.206    72    2.594    2.799

Garbage-collected heap statistics.
    
    S0C: Current survivor space 0 capacity (kB).
    
    S1C: Current survivor space 1 capacity (kB).
    
    S0U: Survivor space 0 utilization (kB).
    
    S1U: Survivor space 1 utilization (kB).
    
    EC: Current eden space capacity (kB).
    
    EU: Eden space utilization (kB).
    
    OC: Current old space capacity (kB).
    
    OU: Old space utilization (kB).
    
    MC: Metaspace capacity (kB).
    
    MU: Metacspace utilization (kB).
    
    CCSC: Compressed class space capacity (kB).
    
    CCSU: Compressed class space used (kB).
    
    YGC: Number of young generation garbage collection events.
    
    YGCT: Young generation garbage collection time.
    
    FGC: Number of full GC events.
    
    FGCT: Full garbage collection time.
    
    GCT: Total garbage collection time.

## Jinfo ##

> 实时查看和调整参数

C:\Users\zdwljs>jinfo -flag UseConcMarkSweepGC 2256
    -XX:+UseConcMarkSweepGC

C:\Users\zdwljs>jinfo -help
    Usage:
        jinfo [option] <pid>
            (to connect to running process)
        jinfo [option] <executable <core>
            (to connect to a core file)
        jinfo [option] [server_id@]<remote server IP or hostname>
            (to connect to remote debug server)
    
    where <option> is one of:
        -flag <name>         to print the value of the named VM flag
        -flag [+|-]<name>    to enable or disable the named VM flag
        -flag <name>=<value> to set the named VM flag to the given value
        -flags               to print VM flags
        -sysprops            to print Java system properties
        <no option>          to print both of the above
        -h | -help           to print this help message

# Jmap #

> 打印内存或者堆空间细节。 [官方文档][Link 2]

C:\Users\zdwljs>jmap -help
    Usage:
        jmap [option] <pid>
            (to connect to running process)
        jmap [option] <executable <core>
            (to connect to a core file)
        jmap [option] [server_id@]<remote server IP or hostname>
            (to connect to remote debug server)
    
    where <option> is one of:
        <none>               to print same info as Solaris pmap
        -heap                to print java heap summary
        -histo[:live]        to print histogram of java object heap; if the "live"
                             suboption is specified, only count live objects
        -clstats             to print class loader statistics
        -finalizerinfo       to print information on objects awaiting finalization
        -dump:<dump-options> to dump java heap in hprof binary format
                             dump-options:
                               live         dump only live objects; if not specified,
                                            all objects in the heap are dumped.
                               format=b     binary format
                               file=<file>  dump heap to <file>
                             Example: jmap -dump:live,format=b,file=heap.bin <pid>
        -F                   force. Use with -dump:<dump-options> <pid> or -histo
                             to force a heap dump or histogram when <pid> does not
                             respond. The "live" suboption is not supported
                             in this mode.
        -h | -help           to print this help message
        -J<flag>             to pass <flag> directly to the runtime system

C:\Users\zdwljs>jmap -dump:format=b,file=d:\work\jvm\ricky.hprof 2256
    Dumping heap to D:\work\jvm\ricky.hprof ...
    Heap dump file created

> 利用上述方式进行快照生成，使用mat进行分析。

*  存活实例

C:\Users\zdwljs>jmap -histo:live 2256 | more
    
     num     #instances         #bytes  class name
    ----------------------------------------------
       1:         60579       52974648  [B
       2:        305141       31563088  [C
       3:         32929       19770080  [I
       4:        302030        7248720  java.lang.String
       5:         61139        6692992  java.lang.Class
       6:         90152        6592144  [Ljava.lang.Object;
       7:         81443        2606176  java.util.HashMap$Node
       8:         48852        1563264  com.intellij.util.text.ByteArrayCharSequence
       9:         47477        1519264  org.jdom.Attribute
      10:         46998        1503936  java.util.concurrent.ConcurrentHashMap$Node
      11:          8922        1496016  [J
      12:          9889        1468048  [Ljava.util.HashMap$Node;
      13:         34702        1388080  java.util.LinkedHashMap$Entry
      14:         38597        1235104  com.intellij.util.containers.IntObjectLinkedMap$MapEntry
      15:         69142        1106272  java.lang.Integer
      16:         23246         929840  org.jdom.Element
      17:         35141         843384  com.intellij.util.SmartList
      18:         19850         794000  com.intellij.util.containers.hash.LinkedHashMap$Entry
      19:         18059         770664  [Lorg.jdom.Attribute;
      20:         23541         753312  org.jdom.ContentList
      21:         23246         743872  org.jdom.AttributeList
      22:         18580         743200  java.lang.ref.SoftReference
      23:         29987         719688  org.jdom.Text
      24:          6691         588808  java.lang.reflect.Method
      25:         18193         582176  java.util.Hashtable$Entry
      26:           479         517184  [F
      27:          8637         483672  java.lang.invoke.MemberName
      28:           600         468776  [Ljava.util.concurrent.ConcurrentHashMap$Node;
      29:         11516         460640  com.intellij.openapi.extensions.impl.ExtensionComponentAdapter
      30:          9436         452928  com.intellij.util.pico.CachingConstructorInjectionComponentAdapter
      31:          6834         451984  [Lorg.jdom.Content;
      32:          6935         443840  java.net.URL
      33:         17241         413784  java.util.ArrayList

## jhat ##

> JVM Heap Analysis Tool jvm堆分析工具

C:\Users\zdwljs>jhat -help
    Usage:  jhat [-stack <bool>] [-refs <bool>] [-port <port>] [-baseline <file>] [-debug <int>] [-version] [-h|-help] <file>
    
            -J<flag>          Pass <flag> directly to the runtime system. For
                              example, -J-mx512m to use a maximum heap size of 512MB
            -stack false:     Turn off tracking object allocation call stack.
            -refs false:      Turn off tracking of references to objects
            -port <port>:     Set the port for the HTTP server.  Defaults to 7000
            -exclude <file>:  Specify a file that lists data members that should
                              be excluded from the reachableFrom query.
            -baseline <file>: Specify a baseline object dump.  Objects in
                              both heap dumps with the same ID and same class will
                              be marked as not being "new".
            -debug <int>:     Set debug level.
                                0:  No debug output
                                1:  Debug hprof file parsing
                                2:  Debug hprof file parsing, no server
            -version          Report version number
            -h|-help          Print this help and exit
            <file>            The file to read
    
    For a dump file that contains multiple heap dumps,
    you may specify which dump in the file
    by appending "#<number>" to the file name, i.e. "foo.hprof#3".
    
    All boolean options default to "true"

*  示例

> 指定快照地址，以及本地http端口

C:\Users\zdwljs>jhat -port 1234 d:\work\jvm\ricky.hprof
    Reading from d:\work\jvm\ricky.hprof...
    Dump file created Mon Apr 02 13:39:22 CST 2018
    Snapshot read, resolving...
    Resolving 6152505 objects...
    Chasing references, expect 1230 dots..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    Eliminating duplicate references..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    Snapshot resolved.
    Started HTTP server on port 1234
    Server is ready.

*  访问：[http://127.0.0.1:1234/][http_127.0.0.1_1234]

[![jhat.png][]][jhat.png]

[![jhat01.png][]][jhat01.png]

## jsack ##

> 打印一个Java线程栈追踪信息，[官方文档][Link 3]

C:\Users\zdwljs>jstack -help
    Usage:
        jstack [-l] <pid>
            (to connect to running process)
        jstack -F [-m] [-l] <pid>
            (to connect to a hung process)
        jstack [-m] [-l] <executable> <core>
            (to connect to a core file)
        jstack [-m] [-l] [server_id@]<remote server IP or hostname>
            (to connect to a remote debug server)
    
    Options:
        -F  to force a thread dump. Use when jstack <pid> does not respond (process is hung)
        -m  to print both java and native frames (mixed mode)
        -l  long listing. Prints additional information about locks
        -h or -help to print this help message

*  实例

C:\Users\zdwljs>jstack -l 2256
    2018-04-02 14:10:41
    Full thread dump OpenJDK 64-Bit Server VM (25.152-b15 mixed mode):
    
    "ApplicationImpl pooled thread 2513" #4852 daemon prio=4 os_prio=-1 tid=0x000000005907a000 nid=0x3178 waiting on condition [0x000000007e48f000]
       java.lang.Thread.State: WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x00000000e0f37c70> (a java.util.concurrent.SynchronousQueue$TransferStack)
            at java.util.concurrent.locks.LockSupport.park(LockSupport.java:175)
            at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:458)
            at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:362)
            at java.util.concurrent.SynchronousQueue.take(SynchronousQueue.java:924)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1067)
            at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1127)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
            at java.lang.Thread.run(Thread.java:745)
    
       Locked ownable synchronizers:
            - None

###  交流群：675599684 ###

[GCROOT.png]: /images/20220528/253633db86a04bb4842ff0e81402eb72.png
[GCNewGen.png]: /images/20220528/a958690dafd94fe0afe93ec44a6044ed.png
[SerialGC.png]: /images/20220528/60908a6f03aa4ce7ba8f4bdd51aecd59.png
[ParNew.png]: /images/20220528/a4ba28ce3af047fba399fef6dde22ebf.png
[GCEden.png]: /images/20220528/275ca5e97a9b41fbb8cabc823656672e.png
[Metaspace.png]: /images/20220528/baf2a9bf18d046609b1a2ce14ebd1e05.png
[Link 1]: https://docs.oracle.com/javase/8/docs/technotes/tools/unix/jstat.html#BEHBBBDJ
[Link 2]: https://docs.oracle.com/javase/8/docs/technotes/tools/unix/jmap.html#BEHBBBDJ
[http_127.0.0.1_1234]: http://127.0.0.1:1234/
[jhat.png]: /images/20220528/99563e78f7b2426baf2f6481284aa63f.png
[jhat01.png]: /images/20220528/fc5403d975fc477ea9fda09628f10d2e.png
[Link 3]: https://docs.oracle.com/javase/8/docs/technotes/tools/unix/jstack.html#BEHBBBDJ