kubernetes系列之六：安装kubernets v1.10.0和ipvs mode kube-proxy

川长思鸟来 2022-05-27 08:08 248阅读 0赞

## 一、前言 ##

kubeadm是Kubernetes官方推出的快速部署Kubernetes集群工具，kubeadm通过将Kubernetes相关服务容器化以简化部署过程。

在kubernetes 1.8以上的版本中，对于kube-proxy组件增加了除iptables模式和用户模式之外ipvs模式的支持。通过ipvs的NAT模式，对访问k8s service的请求进行虚IP到POD IP的转发。

本文在kubernetes v1.10.0的基础上enable IPVS模式的kube-proxy。

转载自https://blog.csdn.net/cloudvtech

## 二、准备工作 ##

1.安装好CentOS操作系统

cat /etc/redhat-release   
CentOS Linux release 7.4.1708 (Core)

2.预先设置必要配置

2.1 停止防火墙：systemctl stop firewalld; systemctl disable firewalld; setenforce 0

2.2 更改/etc/selinux/config： SELINUX=disabled

2.3 配置内核参数：/etc/sysctl.d/k8s.conf

net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1
    net.ipv4.ip_forward = 1
    vm.swappiness=0

sysctl -p /etc/sysctl.d/k8s.conf

载入ipvs内核模块：

modprobe ip\_vs

modprobe ip\_vs\_rr

2.4 配置kubernetes软件源

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
         [kubernetes]
         name=Kubernetes
         baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
         enabled=1
         gpgcheck=1
         repo_gpgcheck=1
         gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
         https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
         EOF

3.安装 kubernetes软件

yum install -y kubelet kubeadm kubectl

![70][]

3.1 根据需要配置kubelet的启动参数

vi /etc/systemd/system/kubelet.service.d/10-kubeadm.conf

[Service]
    Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"
    Environment="KUBELET_SYSTEM_PODS_ARGS=--pod-manifest-path=/etc/kubernetes/manifests --allow-privileged=true"
    Environment="KUBELET_NETWORK_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
    Environment="KUBELET_DNS_ARGS=--cluster-dns=10.96.0.10 --cluster-domain=cluster.local"
    #Environment="KUBELET_AUTHZ_ARGS=--authorization-mode=Webhook --client-ca-file=/etc/kubernetes/pki/ca.crt"
    Environment="KUBELET_CADVISOR_ARGS=--cadvisor-port=0"
    Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=systemd"
    Environment="KUBELET_CERTIFICATE_ARGS=--rotate-certificates=true --cert-dir=/var/lib/kubelet/pki"
    Environment="KUBELET_PROXY_ARGS=--proxy-mode=ipvs --ipvs-min-sync-period=5s --ipvs-sync-period=5s --ipvs-scheduler=rr"
    
    ExecStart=
    ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_SYSTEM_PODS_ARGS $KUBELET_NETWORK_ARGS $KUBELET_DNS_ARGS $KUBELET_AUTHZ_ARGS $KUBELET_CADVISOR_ARGS $KUBELET_CGROUP_ARGS $KUBELET_CERTIFICATE_ARGS $KUBELET_EXTRA_ARGS

3.2 编辑kubeadm的配置文件

4.关闭这个虚拟机，制作多个clone作为minion节点

转载自https://blog.csdn.net/cloudvtech

## 三、配置安装kubernetes master和minion节点 ##

1.启动一个虚拟机作为master节点

2.编辑kubeadm配置文件 kubeadm.config

apiVersion: kubeadm.k8s.io/v1alpha1
    kind: MasterConfiguration
    api:
      advertiseAddress: 192.168.166.101
    networking:
      podSubnet: 10.244.0.0/16
    kubernetesVersion: "v1.10.0"
    kubeProxy:
      config:
        mode: "ipvs"

3.使用kubeadm初始化master节点

kubeadm init   --config ./kubeadm.config \[init\] Using Kubernetes version: v1.10.0

......

![70 1][]

4. 运行上述初始化返回要求运行的命令来配置kubectl

mkdir -p $HOME/.kube
      sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
      sudo chown $(id -u):$(id -g) $HOME/.kube/config

5.安装flannel CNI插件

wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

kubectl apply -f  kube-flannel.yml

这将在每个node上运行flannel的daemonset

6.在各个节点上运行join命令

kubeadm join 192.168.166.101:6443 --token dtvlg9.798fbe57awyzjzfx --discovery-token-ca-cert-hash sha256:a3406c544acb65954339ab9d6b9801673cb646dd17fa162fbf8aa1cd239b2b99

7.查看安装结果

![70 2][]

![70 3][]

Note，要reset整个cluster可以在master和每个node上运行如下命令，然后在运行初始化步骤：

kubeadm reset
    
    rm -rf /etc/kubernetes/pki/ca.crt
    rm -rf /etc/kubernetes/kubelet.conf 
    rm -rf /etc/kubernetes/manifests

要切换kube-proxy的模式，必须修改kubeadm.config，然后使用kubeadm reset和再init整个cluster

转载自https://blog.csdn.net/cloudvtech

## 四、安装nginx deployment ##

1.编辑deployment文件

nginx.yml

apiVersion: apps/v1beta2 # for versions before 1.8.0 use apps/v1beta1
    kind: Deployment
    metadata:
      name: nginx-deployment
    spec:
      selector:
        matchLabels:
          app: nginx
      replicas: 2
      template:
        metadata:
          labels:
            app: nginx
        spec:
          containers:
          - name: nginx
            image: nginx:1.7.9
            ports:
            - containerPort: 80

2.部署

kubectl apply -f nginx.yml

deployment.apps "nginx-deployment" created

![70 4][]

![70 5][]

3.暴露nginx service

kubectl expose deployment/nginx-deployment

![70 6][]

4.查看ipvs，将数据NAT到后端

![70 7][]

而cluster service的VIP会被绑定到每个node的kube-ipvs0虚拟网卡上

node1的NIC

5: kube-ipvs0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN 
        link/ether a2:e0:de:f0:46:e4 brd ff:ff:ff:ff:ff:ff
        inet 10.96.0.1/32 brd 10.96.0.1 scope global kube-ipvs0
           valid_lft forever preferred_lft forever
        inet 10.96.0.10/32 brd 10.96.0.10 scope global kube-ipvs0
           valid_lft forever preferred_lft forever
        inet 10.99.190.144/32 brd 10.99.190.144 scope global kube-ipvs0
           valid_lft forever preferred_lft forever

node2的NIC

5: kube-ipvs0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN 
        link/ether 9e:65:33:4f:c0:7a brd ff:ff:ff:ff:ff:ff
        inet 10.96.0.1/32 brd 10.96.0.1 scope global kube-ipvs0
           valid_lft forever preferred_lft forever
        inet 10.96.0.10/32 brd 10.96.0.10 scope global kube-ipvs0
           valid_lft forever preferred_lft forever
        inet 10.99.190.144/32 brd 10.99.190.144 scope global kube-ipvs0
           valid_lft forever preferred_lft forever

而且这些ipvs使用的NIC的状态是DOWN，只是作为绑定VIP使用

使用ipvs之后，iptables已经没有load balance的信息了

![70 8][]

这里需要说明的是由于所有从主机经由IPVS调度进入POD的数据包都会经过MASQUERADE，所以数据包实际上经过了DNAT(by IPVS)和SNAT(by iptables MASQUERADE)，数据包在POD返回的时候一定会返回到原来node所在的IPVS。所以经由flannel的帮助，kubernnetes的IPVS解决方案完全满足IPVS NAT模式需要director和backend在同一个LAN的需求，事实上，这种模式更加类似于IPVS的FULLNAT模式。

通过cluster IP访问nginx service之后的ipvs统计信息

![70 9][]

## 五、配置nodePort ##

1.node port配置文件nodeport.yaml

kind: Service
    apiVersion: v1
    metadata:
      name: nginx-nodeport
    spec:
      type: NodePort
      ports:
        - port: 80
          nodePort: 30080
      selector:
          app: nginx

2.apply

kubectl apply -f nodeport.yaml

![70 10][]

3.在k8s-node1上查看ipvs

![70 11][]

node

## 六、相关代码 ##

[https://github.com/kubernetes/kubernetes/blob/master/pkg/proxy/ipvs/proxier.go][https_github.com_kubernetes_kubernetes_blob_master_pkg_proxy_ipvs_proxier.go]

![70 12][]

......

![70 13][]

[70]: /images/20220527/595be806f62047f29fc848a2d553e8d8.png
[70 1]: /images/20220527/4a20b4d037784eb9a39d18c1ee3de5b2.png
[70 2]: /images/20220527/8a21f19dcad648599d61352688f97fbd.png
[70 3]: /images/20220527/dd76dec0c6cc4249b78a4d0ca9fd68d8.png
[70 4]: /images/20220527/87ea40cf0a5e4e26b93cf64b55ed17a9.png
[70 5]: /images/20220527/d7d8aa6caaa0480ea62b25c59861f54b.png
[70 6]: /images/20220527/592569f699a64f52a845d71ee7c3ce0a.png
[70 7]: /images/20220527/3f5fc69cc86e463ebda4588d5a88323a.png
[70 8]: /images/20220527/bf7116fc32a94aa9922bb9738b9f650c.png
[70 9]: /images/20220527/b40bbba376674ebbbaf4290b97654597.png
[70 10]: /images/20220527/c2948f552e46484699f78e678f23248b.png
[70 11]: /images/20220527/82ad5c4385174691a916de95c8598dcc.png
[https_github.com_kubernetes_kubernetes_blob_master_pkg_proxy_ipvs_proxier.go]: https://github.com/kubernetes/kubernetes/blob/master/pkg/proxy/ipvs/proxier.go
[70 12]: /images/20220527/339fccf1b914440bb65af307ac3af262.png
[70 13]: /images/20220527/a77fbb93bc2d4e79be705473b4e0ce52.png