解决编译mips gcc 5.2.0版本时报错:mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'

深碍√TFBOYSˉ_ 2022-05-23 13:40 226阅读 0赞

因为厂商提供mips交叉编译器不太满足要求，今天在ubuntu 16.04下尝试编译mips交叉编译器(gcc 5.2.0)，在编译到mpfr时报了个错:

/bin/bash ./libtool --tag=CC   --mode=compile mips-linux-gnu-gcc -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_LOCALE_H=1 -DHAVE_WCHAR_H=1 -DHAVE_STDARG=1 -DHAVE_SYS_TIME_H=1 -DHAVE_STDINT_H=1 -DHAVE_VA_COPY=1 -DHAVE_SETLOCALE=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_LONG_LONG=1 -DHAVE_INTMAX_T=1 -DMPFR_HAVE_FESETROUND=1 -DHAVE_ROUND=1 -DHAVE_TRUNC=1 -DHAVE_FLOOR=1 -DHAVE_CEIL=1 -DHAVE_NEARBYINT=1 -DLT_OBJDIR=\".libs/\" -DHAVE_ATTRIBUTE_MODE=1 -DHAVE_ALLOCA_H=1 -I. -I../.././mpfr   -I/home/gyd/Downloads/gcc-5.2.0/host-mips-linux-gnu/gmp  -g -O2 -MT mul.lo -MD -MP -MF .deps/mul.Tpo -c -o mul.lo ../.././mpfr/mul.c
    libtool: compile:  mips-linux-gnu-gcc -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_LOCALE_H=1 -DHAVE_WCHAR_H=1 -DHAVE_STDARG=1 -DHAVE_SYS_TIME_H=1 -DHAVE_STDINT_H=1 -DHAVE_VA_COPY=1 -DHAVE_SETLOCALE=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_LONG_LONG=1 -DHAVE_INTMAX_T=1 -DMPFR_HAVE_FESETROUND=1 -DHAVE_ROUND=1 -DHAVE_TRUNC=1 -DHAVE_FLOOR=1 -DHAVE_CEIL=1 -DHAVE_NEARBYINT=1 -DLT_OBJDIR=\".libs/\" -DHAVE_ATTRIBUTE_MODE=1 -DHAVE_ALLOCA_H=1 -I. -I../.././mpfr -I/home/gyd/Downloads/gcc-5.2.0/host-mips-linux-gnu/gmp -g -O2 -MT mul.lo -MD -MP -MF .deps/mul.Tpo -c ../.././mpfr/mul.c -o mul.o
    In file included from ../.././mpfr/mpfr-impl.h:87:0,
                     from ../.././mpfr/mul.c:24:
    ../.././mpfr/mul.c: In function 'mpfr_mul':
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:315:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[1], tmp[0], MPFR_MANT (b)[0], MPFR_MANT (c)[0]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:322:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[1], tmp[0], MPFR_MANT (b)[0], MPFR_MANT (c)[0]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:323:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[2], t, MPFR_MANT (b)[1], MPFR_MANT (c)[0]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:332:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[1], tmp[0], MPFR_MANT (b)[0], MPFR_MANT (c)[0]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:333:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[2], t1, MPFR_MANT (b)[1], MPFR_MANT (c)[0]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:336:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (t1, t2, MPFR_MANT (b)[0], MPFR_MANT (c)[1]);
               ^
    ../.././mpfr/mpfr-longlong.h:1016:3: error: impossible constraint in 'asm'
       __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
       ^
    ../.././mpfr/mul.c:337:11: note: in expansion of macro 'umul_ppmm'
               umul_ppmm (tmp[3], t3, MPFR_MANT (b)[1], MPFR_MANT (c)[1]);
               ^
    Makefile:729: recipe for target 'mul.lo' failed
    make[3]: *** [mul.lo] Error 1
    make[3]: Leaving directory '/home/gyd/Downloads/gcc-5.2.0/host-mips-linux-gnu/mpfr'
    Makefile:1452: recipe for target 'all-recursive' failed
    make[2]: *** [all-recursive] Error 1
    make[2]: Leaving directory '/home/gyd/Downloads/gcc-5.2.0/host-mips-linux-gnu/mpfr'
    Makefile:5001: recipe for target 'all-mpfr' failed
    make[1]: *** [all-mpfr] Error 2
    make[1]: Leaving directory '/home/gyd/Downloads/gcc-5.2.0'
    Makefile:879: recipe for target 'all' failed
    make: *** [all] Error 2

貌似问题出在mpfr上，  
google上找到了这篇bug report:[《Bug 69134 - building a mips-cross compiler with in-tree mpfr-2.4.2 fails》][Bug 69134 - building a mips-cross compiler with in-tree mpfr-2.4.2 fails]  
才搞明白原因是mpr-2.4.2 对mips的支持在高版本gcc下有问题。  
文中也附了解决办法，如下图所示修改`mpfr-longlong.h`，将1014和1027行的`#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7`改为`#if __GNUC__ < 4`，目的就是让编译器走`#else`分支(ubuntu16.04的gcc版本是5.4.0),再重新编译即可  
![这里写图片描述][70]

附上编译mips-gcc-5.2.0的脚本

#! /bin/bash
    # 基于君正发布的X1000开发板编译器(mips-gcc520-glibc222)，编译gcc 5.2.0,增加-ffunction-sections -fdata-sections编译选项
    sh_folder=$(dirname $(readlink -f $0))
    with_sysroot=true
    [ "$1" == "with_sysroot" ] && with_sysroot=true
    pushd $sh_folder
    # old mips gcc compiler location
    mips_gcc=/opt/toolchains/mips-gcc520-glibc222
    install_prefix=$sh_folder/release/opt/toolchains/mipsel-gcc520-gdface
    old_sysroot=$mips_gcc/mips-linux-gnu/libc
    target_sysroot=$old_sysroot
    if [ $with_sysroot ];
    then
        # 复制原编译器的 build tools 到安装路径
        target_tools=$install_prefix/mipsel-linux-gnu
        target_sysroot=$target_tools/libc
        [ -d "$target_sysroot" ] && rm "$target_sysroot" -fr
        mkdir -p "$target_tools" || exit -1
        echo "copy build tools to $install_prefix"
        cp -arf "$(dirname $old_sysroot)"/* "$target_tools" || exit -1
    fi
    # download gcc source package
    # wget http://ftp.gnu.org/gnu/gcc/gcc-5.2.0/gcc-5.2.0.tar.bz2 || exit -1
    # tar xvf gcc-5.2.0.tar.bz2 || exit -1
    # gcc source folder
    gcc_folder=gcc-5.2.0
    pushd $gcc_folder || exit -1
    # download dependencies 
    # ./contrib/download_prerequisites 
    # patch for mpfr-2.4.2
    # ../patch_mpfr.sh
    [   -d build ] && rm build -fr
    [ ! -d build ] && mkdir build
    pushd build
    # X1000为小端(little endian),所以这里--target要改为mipsel-linux-gnu，否则编译不通过
    ../configure --with-pkgversion='Gdface 2018.06'\
        --build=x86_64-linux-gnu \
        --host=x86_64-linux-gnu \
        --target=mipsel-linux-gnu \
        --enable-threads \
        --disable-libmudflap \
        --disable-libssp \
        --disable-libstdcxx-pch \
        --with-arch-32=mips32r2 \
        --with-arch-64=mips64r2 \
        --with-float=hard \
        --with-mips-plt \
        --enable-extra-sgxxlite-multilibs \
        --with-specs='-D__CS_SOURCERYGXX_MAJ__=2015 -D__CS_SOURCERYGXX_MIN__=11 -D__CS_SOURCERYGXX_REV__=32' \
        --enable-languages=c,c++ \
        --enable-shared \
        --enable-static \
        --enable-lto \
        --enable-symvers=gnu \
        --enable-__cxa_atexit \
        --with-glibc-version=2.22 \
        --disable-nls \
        --prefix=$install_prefix \
        --with-sysroot=$target_sysroot \
        --with-build-sysroot=$target_sysroot \
        --enable-libgomp \
        --disable-libitm \
        --enable-libatomic \
        --disable-libssp \
        --disable-libcc1 \
        --with-endian=big \
        --enable-poison-system-directories \
        --with-python-dir=mipsel-linux-gnu/share/gdb/python \
        --with-build-time-tools=$mips_gcc/mips-linux-gnu/bin \
        CFLAGS="-ffunction-sections -fdata-sections" \
        CXXFLAGS="-ffunction-sections -fdata-sections" \
        SED=sed || exit -1
    make -j8 || exit -1
    make install || exit -1
    popd
    popd
    popd

# 参考资料 #

[《Bug 69134 - building a mips-cross compiler with in-tree mpfr-2.4.2 fails》][Bug 69134 - building a mips-cross compiler with in-tree mpfr-2.4.2 fails]

[Bug 69134 - building a mips-cross compiler with in-tree mpfr-2.4.2 fails]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69134
[70]: /images/20220523/f277e3b856b047a7a45619c9557ae8ba.png