Hadoop3 50070端口访问不到HDFS页面（hadoop的默认配置）

骑猪看日落 2022-05-08 23:58 1238阅读 0赞

# Hadoop3 50070端口访问不到HDFS页面 #

hadoop3配置注意事项：[https://blog.csdn.net/u014646662/article/details/82890443][https_blog.csdn.net_u014646662_article_details_82890443]

hadoop3 hdfs web端口改为9870

<property>
      <name>dfs.namenode.http-address</name>
      <value>0.0.0.0:9870</value>
      <description>
        The address and the base port where the dfs namenode web ui will listen on.
      </description>
    </property>

下面是hadoop的默认配置

1.core-default.xml

2.hdfs-default.xml

<?xml version="1.0"?>
    <?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
    
    
    
    
    
    
    
    <configuration>
    
    <property>
      <name>hadoop.hdfs.configuration.version</name>
      <value>1</value>
      <description>version of this configuration file</description>
    </property>
    
    <property>
      <name>dfs.namenode.rpc-address</name>
      <value></value>
      <description>
        RPC address that handles all clients requests. In the case of HA/Federation where multiple namenodes exist,
        the name service id is added to the name e.g. dfs.namenode.rpc-address.ns1
        dfs.namenode.rpc-address.EXAMPLENAMESERVICE
        The value of this property will take the form of nn-host1:rpc-port. The NameNode's default RPC port is 8020.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.rpc-bind-host</name>
      <value></value>
      <description>
        The actual address the RPC server will bind to. If this optional address is
        set, it overrides only the hostname portion of dfs.namenode.rpc-address.
        It can also be specified per name node or name service for HA/Federation.
        This is useful for making the name node listen on all interfaces by
        setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.servicerpc-address</name>
      <value></value>
      <description>
        RPC address for HDFS Services communication. BackupNode, Datanodes and all other services should be
        connecting to this address if it is configured. In the case of HA/Federation where multiple namenodes exist,
        the name service id is added to the name e.g. dfs.namenode.servicerpc-address.ns1
        dfs.namenode.rpc-address.EXAMPLENAMESERVICE
        The value of this property will take the form of nn-host1:rpc-port.
        If the value of this property is unset the value of dfs.namenode.rpc-address will be used as the default.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.servicerpc-bind-host</name>
      <value></value>
      <description>
        The actual address the service RPC server will bind to. If this optional address is
        set, it overrides only the hostname portion of dfs.namenode.servicerpc-address.
        It can also be specified per name node or name service for HA/Federation.
        This is useful for making the name node listen on all interfaces by
        setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lifeline.rpc-address</name>
      <value></value>
      <description>
        NameNode RPC lifeline address.  This is an optional separate RPC address
        that can be used to isolate health checks and liveness to protect against
        resource exhaustion in the main RPC handler pool.  In the case of
        HA/Federation where multiple NameNodes exist, the name service ID is added
        to the name e.g. dfs.namenode.lifeline.rpc-address.ns1.  The value of this
        property will take the form of nn-host1:rpc-port.  If this property is not
        defined, then the NameNode will not start a lifeline RPC server.  By
        default, the property is not defined.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lifeline.rpc-bind-host</name>
      <value></value>
      <description>
        The actual address the lifeline RPC server will bind to.  If this optional
        address is set, it overrides only the hostname portion of
        dfs.namenode.lifeline.rpc-address.  It can also be specified per name node
        or name service for HA/Federation.  This is useful for making the name node
        listen on all interfaces by setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.secondary.http-address</name>
      <value>0.0.0.0:9868</value>
      <description>
        The secondary namenode http server address and port.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.secondary.https-address</name>
      <value>0.0.0.0:9869</value>
      <description>
        The secondary namenode HTTPS server address and port.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.address</name>
      <value>0.0.0.0:9866</value>
      <description>
        The datanode server address and port for data transfer.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.http.address</name>
      <value>0.0.0.0:9864</value>
      <description>
        The datanode http server address and port.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ipc.address</name>
      <value>0.0.0.0:9867</value>
      <description>
        The datanode ipc server address and port.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.http.internal-proxy.port</name>
      <value>0</value>
      <description>
        The datanode's internal web proxy port.
        By default it selects a random port available in runtime.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.handler.count</name>
      <value>10</value>
      <description>The number of server threads for the datanode.</description>
    </property>
    
    <property>
      <name>dfs.namenode.http-address</name>
      <value>0.0.0.0:9870</value>
      <description>
        The address and the base port where the dfs namenode web ui will listen on.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.http-bind-host</name>
      <value></value>
      <description>
        The actual address the HTTP server will bind to. If this optional address
        is set, it overrides only the hostname portion of dfs.namenode.http-address.
        It can also be specified per name node or name service for HA/Federation.
        This is useful for making the name node HTTP server listen on all
        interfaces by setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.heartbeat.recheck-interval</name>
      <value>300000</value>
      <description>
        This time decides the interval to check for expired datanodes.
        With this value and dfs.heartbeat.interval, the interval of
        deciding the datanode is stale or not is also calculated.
        The unit of this configuration is millisecond.
      </description>
    </property>
    
    <property>
      <name>dfs.http.policy</name>
      <value>HTTP_ONLY</value>
      <description>Decide if HTTPS(SSL) is supported on HDFS
        This configures the HTTP endpoint for HDFS daemons:
          The following values are supported:
          - HTTP_ONLY : Service is provided only on http
          - HTTPS_ONLY : Service is provided only on https
          - HTTP_AND_HTTPS : Service is provided both on http and https
      </description>
    </property>
    
    <property>
      <name>dfs.client.https.need-auth</name>
      <value>false</value>
      <description>Whether SSL client certificate authentication is required
      </description>
    </property>
    
    <property>
      <name>dfs.client.cached.conn.retry</name>
      <value>3</value>
      <description>The number of times the HDFS client will pull a socket from the
       cache.  Once this number is exceeded, the client will try to create a new
       socket.
      </description>
    </property>
    
    
    <property>
      <name>dfs.https.server.keystore.resource</name>
      <value>ssl-server.xml</value>
      <description>Resource file from which ssl server keystore
      information will be extracted
      </description>
    </property>
    
    <property>
      <name>dfs.client.https.keystore.resource</name>
      <value>ssl-client.xml</value>
      <description>Resource file from which ssl client keystore
      information will be extracted
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.https.address</name>
      <value>0.0.0.0:9865</value>
      <description>The datanode secure http server address and port.</description>
    </property>
    
    <property>
      <name>dfs.namenode.https-address</name>
      <value>0.0.0.0:9871</value>
      <description>The namenode secure http server address and port.</description>
    </property>
    
    <property>
      <name>dfs.namenode.https-bind-host</name>
      <value></value>
      <description>
        The actual address the HTTPS server will bind to. If this optional address
        is set, it overrides only the hostname portion of dfs.namenode.https-address.
        It can also be specified per name node or name service for HA/Federation.
        This is useful for making the name node HTTPS server listen on all
        interfaces by setting it to 0.0.0.0.
      </description>
    </property>
    
     <property>
       <name>dfs.datanode.dns.interface</name>
       <value>default</value>
       <description>
         The name of the Network Interface from which a data node should
         report its IP address. e.g. eth2. This setting may be required for some
         multi-homed nodes where the DataNodes are assigned multiple hostnames
         and it is desirable for the DataNodes to use a non-default hostname.
    
         Prefer using hadoop.security.dns.interface over
         dfs.datanode.dns.interface.
       </description>
     </property>
    
    <property>
      <name>dfs.datanode.dns.nameserver</name>
      <value>default</value>
      <description>
        The host name or IP address of the name server (DNS) which a DataNode
        should use to determine its own host name.
    
        Prefer using hadoop.security.dns.nameserver over
        dfs.datanode.dns.nameserver.
      </description>
     </property>
    
     <property>
      <name>dfs.namenode.backup.address</name>
      <value>0.0.0.0:50100</value>
      <description>
        The backup node server address and port.
        If the port is 0 then the server will start on a free port.
      </description>
    </property>
    
     <property>
      <name>dfs.namenode.backup.http-address</name>
      <value>0.0.0.0:50105</value>
      <description>
        The backup node http server address and port.
        If the port is 0 then the server will start on a free port.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.redundancy.considerLoad</name>
      <value>true</value>
      <description>Decide if chooseTarget considers the target's load or not
      </description>
    </property>
    
      <property>
        <name>dfs.namenode.redundancy.considerLoad.factor</name>
        <value>2.0</value>
        <description>The factor by which a node's load can exceed the average
          before being rejected for writes, only if considerLoad is true.
        </description>
      </property>
    
    <property>
      <name>dfs.default.chunk.view.size</name>
      <value>32768</value>
      <description>The number of bytes to view for a file on the browser.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.du.reserved.calculator</name>
      <value>org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.ReservedSpaceCalculator$ReservedSpaceCalculatorAbsolute</value>
      <description>Determines the class of ReservedSpaceCalculator to be used for
        calculating disk space reservedfor non-HDFS data. The default calculator is
        ReservedSpaceCalculatorAbsolute which will use dfs.datanode.du.reserved
        for a static reserved number of bytes. ReservedSpaceCalculatorPercentage
        will use dfs.datanode.du.reserved.pct to calculate the reserved number
        of bytes based on the size of the storage. ReservedSpaceCalculatorConservative and
        ReservedSpaceCalculatorAggressive will use their combination, Conservative will use
        maximum, Aggressive minimum. For more details see ReservedSpaceCalculator.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.du.reserved</name>
      <value>0</value>
      <description>Reserved space in bytes per volume. Always leave this much space free for non dfs use.
          Specific storage type based reservation is also supported. The property can be followed with
          corresponding storage types ([ssd]/[disk]/[archive]/[ram_disk]) for cluster with heterogeneous storage.
          For example, reserved space for RAM_DISK storage can be configured using property
          'dfs.datanode.du.reserved.ram_disk'. If specific storage type reservation is not configured
          then dfs.datanode.du.reserved will be used.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.du.reserved.pct</name>
      <value>0</value>
      <description>Reserved space in percentage. Read dfs.datanode.du.reserved.calculator to see
        when this takes effect. The actual number of bytes reserved will be calculated by using the
        total capacity of the data directory in question. Specific storage type based reservation
        is also supported. The property can be followed with corresponding storage types
        ([ssd]/[disk]/[archive]/[ram_disk]) for cluster with heterogeneous storage.
        For example, reserved percentage space for RAM_DISK storage can be configured using property
        'dfs.datanode.du.reserved.pct.ram_disk'. If specific storage type reservation is not configured
        then dfs.datanode.du.reserved.pct will be used.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.name.dir</name>
      <value>file://${hadoop.tmp.dir}/dfs/name</value>
      <description>Determines where on the local filesystem the DFS name node
          should store the name table(fsimage).  If this is a comma-delimited list
          of directories then the name table is replicated in all of the
          directories, for redundancy. </description>
    </property>
    
    <property>
      <name>dfs.namenode.name.dir.restore</name>
      <value>false</value>
      <description>Set to true to enable NameNode to attempt recovering a
          previously failed dfs.namenode.name.dir. When enabled, a recovery of any
          failed directory is attempted during checkpoint.</description>
    </property>
    
    <property>
      <name>dfs.namenode.fs-limits.max-component-length</name>
      <value>255</value>
      <description>Defines the maximum number of bytes in UTF-8 encoding in each
          component of a path.  A value of 0 will disable the check.</description>
    </property>
    
    <property>
      <name>dfs.namenode.fs-limits.max-directory-items</name>
      <value>1048576</value>
      <description>Defines the maximum number of items that a directory may
          contain. Cannot set the property to a value less than 1 or more than
          6400000.</description>
    </property>
    
    <property>
      <name>dfs.namenode.fs-limits.min-block-size</name>
      <value>1048576</value>
      <description>Minimum block size in bytes, enforced by the Namenode at create
          time. This prevents the accidental creation of files with tiny block
          sizes (and thus many blocks), which can degrade
          performance.</description>
    </property>
    
    <property>
        <name>dfs.namenode.fs-limits.max-blocks-per-file</name>
        <value>10000</value>
        <description>Maximum number of blocks per file, enforced by the Namenode on
            write. This prevents the creation of extremely large files which can
            degrade performance.</description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.dir</name>
      <value>${dfs.namenode.name.dir}</value>
      <description>Determines where on the local filesystem the DFS name node
          should store the transaction (edits) file. If this is a comma-delimited list
          of directories then the transaction file is replicated in all of the 
          directories, for redundancy. Default value is same as dfs.namenode.name.dir
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.dir.required</name>
      <value></value>
      <description>This should be a subset of dfs.namenode.edits.dir,
          to ensure that the transaction (edits) file
          in these places is always up-to-date.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.shared.edits.dir</name>
      <value></value>
      <description>A directory on shared storage between the multiple namenodes
      in an HA cluster. This directory will be written by the active and read
      by the standby in order to keep the namespaces synchronized. This directory
      does not need to be listed in dfs.namenode.edits.dir above. It should be
      left empty in a non-HA cluster.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.journal-plugin.qjournal</name>
      <value>org.apache.hadoop.hdfs.qjournal.client.QuorumJournalManager</value>
    </property>
    
    <property>
      <name>dfs.permissions.enabled</name>
      <value>true</value>
      <description>
        If "true", enable permission checking in HDFS.
        If "false", permission checking is turned off,
        but all other behavior is unchanged.
        Switching from one parameter value to the other does not change the mode,
        owner or group of files or directories.
      </description>
    </property>
    
    <property>
      <name>dfs.permissions.superusergroup</name>
      <value>supergroup</value>
      <description>The name of the group of super-users.
        The value should be a single group name.
      </description>
    </property>
    
    <property>
       <name>dfs.cluster.administrators</name>
       <value></value>
       <description>ACL for the admins, this configuration is used to control
         who can access the default servlets in the namenode, etc. The value
         should be a comma separated list of users and groups. The user list
         comes first and is separated by a space followed by the group list,
         e.g. "user1,user2 group1,group2". Both users and groups are optional,
         so "user1", " group1", "", "user1 group1", "user1,user2 group1,group2"
         are all valid (note the leading space in " group1"). '*' grants access
         to all users and groups, e.g. '*', '* ' and ' *' are all valid.
       </description>
    </property>
    
    <property>
      <name>dfs.namenode.acls.enabled</name>
      <value>false</value>
      <description>
        Set to true to enable support for HDFS ACLs (Access Control Lists).  By
        default, ACLs are disabled.  When ACLs are disabled, the NameNode rejects
        all RPCs related to setting or getting ACLs.
      </description>
    </property>
    
      <property>
        <name>dfs.namenode.posix.acl.inheritance.enabled</name>
        <value>true</value>
        <description>
          Set to true to enable POSIX style ACL inheritance. When it is enabled
          and the create request comes from a compatible client, the NameNode
          will apply default ACLs from the parent directory to the create mode
          and ignore the client umask. If no default ACL found, it will apply the
          client umask.
        </description>
      </property>
    
      <property>
      <name>dfs.namenode.lazypersist.file.scrub.interval.sec</name>
      <value>300</value>
      <description>
        The NameNode periodically scans the namespace for LazyPersist files with
        missing blocks and unlinks them from the namespace. This configuration key
        controls the interval between successive scans. If this value is set to 0,
        the file scrubber is disabled.
      </description>
    </property>
    <property>
      <name>dfs.block.access.token.enable</name>
      <value>false</value>
      <description>
        If "true", access tokens are used as capabilities for accessing datanodes.
        If "false", no access tokens are checked on accessing datanodes.
      </description>
    </property>
    
    <property>
      <name>dfs.block.access.key.update.interval</name>
      <value>600</value>
      <description>
        Interval in minutes at which namenode updates its access keys.
      </description>
    </property>
    
    <property>
      <name>dfs.block.access.token.lifetime</name>
      <value>600</value>
      <description>The lifetime of access tokens in minutes.</description>
    </property>
    
    <property>
      <name>dfs.block.access.token.protobuf.enable</name>
      <value>false</value>
      <description>
        If "true", block tokens are written using Protocol Buffers.
        If "false", block tokens are written using Legacy format.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.data.dir</name>
      <value>file://${hadoop.tmp.dir}/dfs/data</value>
      <description>Determines where on the local filesystem an DFS data node
      should store its blocks.  If this is a comma-delimited
      list of directories, then data will be stored in all named
      directories, typically on different devices. The directories should be tagged
      with corresponding storage types ([SSD]/[DISK]/[ARCHIVE]/[RAM_DISK]) for HDFS
      storage policies. The default storage type will be DISK if the directory does
      not have a storage type tagged explicitly. Directories that do not exist will
      be created if local filesystem permission allows.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.data.dir.perm</name>
      <value>700</value>
      <description>Permissions for the directories on on the local filesystem where
      the DFS data node store its blocks. The permissions can either be octal or
      symbolic.</description>
    </property>
    
    <property>
      <name>dfs.replication</name>
      <value>3</value>
      <description>Default block replication. 
      The actual number of replications can be specified when the file is created.
      The default is used if replication is not specified in create time.
      </description>
    </property>
    
    <property>
      <name>dfs.replication.max</name>
      <value>512</value>
      <description>Maximal block replication. 
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.replication.min</name>
      <value>1</value>
      <description>Minimal block replication. 
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.maintenance.replication.min</name>
      <value>1</value>
      <description>Minimal live block replication in existence of maintenance mode.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.safemode.replication.min</name>
      <value></value>
      <description>
          a separate minimum replication factor for calculating safe block count.
          This is an expert level setting.
          Setting this lower than the dfs.namenode.replication.min
          is not recommend and/or dangerous for production setups.
          When it's not set it takes value from dfs.namenode.replication.min
      </description>
    </property>
    
    <property>
      <name>dfs.blocksize</name>
      <value>134217728</value>
      <description>
          The default block size for new files, in bytes.
          You can use the following suffix (case insensitive):
          k(kilo), m(mega), g(giga), t(tera), p(peta), e(exa) to specify the size (such as 128k, 512m, 1g, etc.),
          Or provide complete size in bytes (such as 134217728 for 128 MB).
      </description>
    </property>
    
    <property>
      <name>dfs.client.block.write.retries</name>
      <value>3</value>
      <description>The number of retries for writing blocks to the data nodes, 
      before we signal failure to the application.
      </description>
    </property>
    
    <property>
      <name>dfs.client.block.write.replace-datanode-on-failure.enable</name>
      <value>true</value>
      <description>
        If there is a datanode/network failure in the write pipeline,
        DFSClient will try to remove the failed datanode from the pipeline
        and then continue writing with the remaining datanodes. As a result,
        the number of datanodes in the pipeline is decreased.  The feature is
        to add new datanodes to the pipeline.
    
        This is a site-wide property to enable/disable the feature.
    
        When the cluster size is extremely small, e.g. 3 nodes or less, cluster
        administrators may want to set the policy to NEVER in the default
        configuration file or disable this feature.  Otherwise, users may
        experience an unusually high rate of pipeline failures since it is
        impossible to find new datanodes for replacement.
    
        See also dfs.client.block.write.replace-datanode-on-failure.policy
      </description>
    </property>
    
    <property>
      <name>dfs.client.block.write.replace-datanode-on-failure.policy</name>
      <value>DEFAULT</value>
      <description>
        This property is used only if the value of
        dfs.client.block.write.replace-datanode-on-failure.enable is true.
    
        ALWAYS: always add a new datanode when an existing datanode is removed.
        
        NEVER: never add a new datanode.
    
        DEFAULT: 
          Let r be the replication number.
          Let n be the number of existing datanodes.
          Add a new datanode only if r is greater than or equal to 3 and either
          (1) floor(r/2) is greater than or equal to n; or
          (2) r is greater than n and the block is hflushed/appended.
      </description>
    </property>
    
    <property>
      <name>dfs.client.block.write.replace-datanode-on-failure.best-effort</name>
      <value>false</value>
      <description>
        This property is used only if the value of
        dfs.client.block.write.replace-datanode-on-failure.enable is true.
    
        Best effort means that the client will try to replace a failed datanode
        in write pipeline (provided that the policy is satisfied), however, it 
        continues the write operation in case that the datanode replacement also
        fails.
    
        Suppose the datanode replacement fails.
        false: An exception should be thrown so that the write will fail.
        true : The write should be resumed with the remaining datandoes.
      
        Note that setting this property to true allows writing to a pipeline
        with a smaller number of datanodes.  As a result, it increases the
        probability of data loss.
      </description>
    </property>
    
      <property>
        <name>dfs.client.block.write.replace-datanode-on-failure.min-replication</name>
        <value>0</value>
        <description>
          The minimum number of replications that are needed to not to fail
          the write pipeline if new datanodes can not be found to replace
          failed datanodes (could be due to network failure) in the write pipeline.
          If the number of the remaining datanodes in the write pipeline is greater
          than or equal to this property value, continue writing to the remaining nodes.
          Otherwise throw exception.
    
          If this is set to 0, an exception will be thrown, when a replacement
          can not be found.
          See also dfs.client.block.write.replace-datanode-on-failure.policy
        </description>
      </property>
    
    <property>
      <name>dfs.blockreport.intervalMsec</name>
      <value>21600000</value>
      <description>Determines block reporting interval in milliseconds.</description>
    </property>
    
    <property>
      <name>dfs.blockreport.initialDelay</name>
      <value>0s</value>
      <description>
        Delay for first block report in seconds. Support multiple time unit
        suffix(case insensitive), as described in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
        <name>dfs.blockreport.split.threshold</name>
        <value>1000000</value>
        <description>If the number of blocks on the DataNode is below this
        threshold then it will send block reports for all Storage Directories
        in a single message.
    
        If the number of blocks exceeds this threshold then the DataNode will
        send block reports for each Storage Directory in separate messages.
    
        Set to zero to always split.
        </description>
    </property>
    
    <property>
      <name>dfs.namenode.max.full.block.report.leases</name>
      <value>6</value>
      <description>The maximum number of leases for full block reports that the
        NameNode will issue at any given time.  This prevents the NameNode from
        being flooded with full block reports that use up all the RPC handler
        threads.  This number should never be more than the number of RPC handler
        threads or less than 1.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.full.block.report.lease.length.ms</name>
      <value>300000</value>
      <description>
        The number of milliseconds that the NameNode will wait before invalidating
        a full block report lease.  This prevents a crashed DataNode from
        permanently using up a full block report lease.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.directoryscan.interval</name>
      <value>21600s</value>
      <description>Interval in seconds for Datanode to scan data directories and
      reconcile the difference between blocks in memory and on the disk.
      Support multiple time unit suffix(case insensitive), as described
      in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.directoryscan.threads</name>
      <value>1</value>
      <description>How many threads should the threadpool used to compile reports
      for volumes in parallel have.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.directoryscan.throttle.limit.ms.per.sec</name>
      <value>1000</value>
      <description>The report compilation threads are limited to only running for
      a given number of milliseconds per second, as configured by the
      property. The limit is taken per thread, not in aggregate, e.g. setting
      a limit of 100ms for 4 compiler threads will result in each thread being
      limited to 100ms, not 25ms.
    
      Note that the throttle does not interrupt the report compiler threads, so the
      actual running time of the threads per second will typically be somewhat
      higher than the throttle limit, usually by no more than 20%.
    
      Setting this limit to 1000 disables compiler thread throttling. Only
      values between 1 and 1000 are valid. Setting an invalid value will result
      in the throttle being disabled and an error message being logged. 1000 is
      the default setting.
      </description>
    </property>
    
    <property>
      <name>dfs.heartbeat.interval</name>
      <value>3s</value>
      <description>
        Determines datanode heartbeat interval in seconds.
        Can use the following suffix (case insensitive):
        ms(millis), s(sec), m(min), h(hour), d(day)
        to specify the time (such as 2s, 2m, 1h, etc.).
        Or provide complete number in seconds (such as 30 for 30 seconds).
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.lifeline.interval.seconds</name>
      <value></value>
      <description>
        Sets the interval in seconds between sending DataNode Lifeline Protocol
        messages from the DataNode to the NameNode.  The value must be greater than
        the value of dfs.heartbeat.interval.  If this property is not defined, then
        the default behavior is to calculate the interval as 3x the value of
        dfs.heartbeat.interval.  Note that normal heartbeat processing may cause the
        DataNode to postpone sending lifeline messages if they are not required.
        Under normal operations with speedy heartbeat processing, it is possible
        that no lifeline messages will need to be sent at all.  This property has no
        effect if dfs.namenode.lifeline.rpc-address is not defined.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.handler.count</name>
      <value>10</value>
      <description>The number of Namenode RPC server threads that listen to
      requests from clients.
      If dfs.namenode.servicerpc-address is not configured then
      Namenode RPC server threads listen to requests from all nodes.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.service.handler.count</name>
      <value>10</value>
      <description>The number of Namenode RPC server threads that listen to
      requests from DataNodes and from all other non-client nodes.
      dfs.namenode.service.handler.count will be valid only if
      dfs.namenode.servicerpc-address is configured.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lifeline.handler.ratio</name>
      <value>0.10</value>
      <description>
        A ratio applied to the value of dfs.namenode.handler.count, which then
        provides the number of RPC server threads the NameNode runs for handling the
        lifeline RPC server.  For example, if dfs.namenode.handler.count is 100, and
        dfs.namenode.lifeline.handler.factor is 0.10, then the NameNode starts
        100 * 0.10 = 10 threads for handling the lifeline RPC server.  It is common
        to tune the value of dfs.namenode.handler.count as a function of the number
        of DataNodes in a cluster.  Using this property allows for the lifeline RPC
        server handler threads to be tuned automatically without needing to touch a
        separate property.  Lifeline message processing is lightweight, so it is
        expected to require many fewer threads than the main NameNode RPC server.
        This property is not used if dfs.namenode.lifeline.handler.count is defined,
        which sets an absolute thread count.  This property has no effect if
        dfs.namenode.lifeline.rpc-address is not defined.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lifeline.handler.count</name>
      <value></value>
      <description>
        Sets an absolute number of RPC server threads the NameNode runs for handling
        the DataNode Lifeline Protocol and HA health check requests from ZKFC.  If
        this property is defined, then it overrides the behavior of
        dfs.namenode.lifeline.handler.ratio.  By default, it is not defined.  This
        property has no effect if dfs.namenode.lifeline.rpc-address is not defined.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.safemode.threshold-pct</name>
      <value>0.999f</value>
      <description>
        Specifies the percentage of blocks that should satisfy 
        the minimal replication requirement defined by dfs.namenode.replication.min.
        Values less than or equal to 0 mean not to wait for any particular
        percentage of blocks before exiting safemode.
        Values greater than 1 will make safe mode permanent.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.safemode.min.datanodes</name>
      <value>0</value>
      <description>
        Specifies the number of datanodes that must be considered alive
        before the name node exits safemode.
        Values less than or equal to 0 mean not to take the number of live
        datanodes into account when deciding whether to remain in safe mode
        during startup.
        Values greater than the number of datanodes in the cluster
        will make safe mode permanent.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.safemode.extension</name>
      <value>30000</value>
      <description>
        Determines extension of safe mode in milliseconds after the threshold level
        is reached.  Support multiple time unit suffix (case insensitive), as
        described in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.resource.check.interval</name>
      <value>5000</value>
      <description>
        The interval in milliseconds at which the NameNode resource checker runs.
        The checker calculates the number of the NameNode storage volumes whose
        available spaces are more than dfs.namenode.resource.du.reserved, and
        enters safemode if the number becomes lower than the minimum value
        specified by dfs.namenode.resource.checked.volumes.minimum.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.resource.du.reserved</name>
      <value>104857600</value>
      <description>
        The amount of space to reserve/require for a NameNode storage directory
        in bytes. The default is 100MB.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.resource.checked.volumes</name>
      <value></value>
      <description>
        A list of local directories for the NameNode resource checker to check in
        addition to the local edits directories.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.resource.checked.volumes.minimum</name>
      <value>1</value>
      <description>
        The minimum number of redundant NameNode storage volumes required.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.balance.bandwidthPerSec</name>
      <value>10m</value>
      <description>
            Specifies the maximum amount of bandwidth that each datanode
            can utilize for the balancing purpose in term of
            the number of bytes per second. You can use the following
            suffix (case insensitive):
            k(kilo), m(mega), g(giga), t(tera), p(peta), e(exa)to specify the size
            (such as 128k, 512m, 1g, etc.).
            Or provide complete size in bytes (such as 134217728 for 128 MB).
      </description>
    </property>
    
    <property>
      <name>dfs.hosts</name>
      <value></value>
      <description>Names a file that contains a list of hosts that are
      permitted to connect to the namenode. The full pathname of the file
      must be specified.  If the value is empty, all hosts are
      permitted.</description>
    </property>
    
    <property>
      <name>dfs.hosts.exclude</name>
      <value></value>
      <description>Names a file that contains a list of hosts that are
      not permitted to connect to the namenode.  The full pathname of the
      file must be specified.  If the value is empty, no hosts are
      excluded.</description>
    </property> 
    
    <property>
      <name>dfs.namenode.max.objects</name>
      <value>0</value>
      <description>The maximum number of files, directories and blocks
      dfs supports. A value of zero indicates no limit to the number
      of objects that dfs supports.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.datanode.registration.ip-hostname-check</name>
      <value>true</value>
      <description>
        If true (the default), then the namenode requires that a connecting
        datanode's address must be resolved to a hostname.  If necessary, a reverse
        DNS lookup is performed.  All attempts to register a datanode from an
        unresolvable address are rejected.
    
        It is recommended that this setting be left on to prevent accidental
        registration of datanodes listed by hostname in the excludes file during a
        DNS outage.  Only set this to false in environments where there is no
        infrastructure to support reverse DNS lookup.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.decommission.interval</name>
      <value>30s</value>
      <description>Namenode periodicity in seconds to check if
        decommission or maintenance is complete. Support multiple time unit
        suffix(case insensitive), as described in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.decommission.blocks.per.interval</name>
      <value>500000</value>
      <description>The approximate number of blocks to process per decommission
        or maintenance interval, as defined in dfs.namenode.decommission.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.decommission.max.concurrent.tracked.nodes</name>
      <value>100</value>
      <description>
        The maximum number of decommission-in-progress or
        entering-maintenance datanodes nodes that will be tracked at one time by
        the namenode. Tracking these datanode consumes additional NN memory
        proportional to the number of blocks on the datnode. Having a conservative
        limit reduces the potential impact of decommissioning or maintenance of
        a large number of nodes at once.
          
        A value of 0 means no limit will be enforced.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.redundancy.interval.seconds</name>
      <value>3s</value>
      <description>The periodicity in seconds with which the namenode computes 
      low redundancy work for datanodes. Support multiple time unit suffix(case insensitive),
      as described in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.accesstime.precision</name>
      <value>3600000</value>
      <description>The access time for HDFS file is precise upto this value. 
                   The default value is 1 hour. Setting a value of 0 disables
                   access times for HDFS.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.plugins</name>
      <value></value>
      <description>Comma-separated list of datanode plug-ins to be activated.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.plugins</name>
      <value></value>
      <description>Comma-separated list of namenode plug-ins to be activated.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.block-placement-policy.default.prefer-local-node</name>
      <value>true</value>
      <description>Controls how the default block placement policy places
      the first replica of a block. When true, it will prefer the node where
      the client is running.  When false, it will prefer a node in the same rack
      as the client. Setting to false avoids situations where entire copies of
      large files end up on a single node, thus creating hotspots.
      </description>
    </property>
    
    
    <property>
      <name>dfs.stream-buffer-size</name>
      <value>4096</value>
      <description>The size of buffer to stream files.
      The size of this buffer should probably be a multiple of hardware
      page size (4096 on Intel x86), and it determines how much data is
      buffered during read and write operations.</description>
    </property>
    
    <property>
      <name>dfs.bytes-per-checksum</name>
      <value>512</value>
      <description>The number of bytes per checksum.  Must not be larger than
      dfs.stream-buffer-size</description>
    </property>
    
    <property>
      <name>dfs.client-write-packet-size</name>
      <value>65536</value>
      <description>Packet size for clients to write</description>
    </property>
    
    <property>
      <name>dfs.client.write.exclude.nodes.cache.expiry.interval.millis</name>
      <value>600000</value>
      <description>The maximum period to keep a DN in the excluded nodes list
      at a client. After this period, in milliseconds, the previously excluded node(s) will
      be removed automatically from the cache and will be considered good for block allocations
      again. Useful to lower or raise in situations where you keep a file open for very long
      periods (such as a Write-Ahead-Log (WAL) file) to make the writer tolerant to cluster maintenance
      restarts. Defaults to 10 minutes.</description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.dir</name>
      <value>file://${hadoop.tmp.dir}/dfs/namesecondary</value>
      <description>Determines where on the local filesystem the DFS secondary
          name node should store the temporary images to merge.
          If this is a comma-delimited list of directories then the image is
          replicated in all of the directories for redundancy.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.edits.dir</name>
      <value>${dfs.namenode.checkpoint.dir}</value>
      <description>Determines where on the local filesystem the DFS secondary
          name node should store the temporary edits to merge.
          If this is a comma-delimited list of directories then the edits is
          replicated in all of the directories for redundancy.
          Default value is same as dfs.namenode.checkpoint.dir
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.period</name>
      <value>3600s</value>
      <description>
        The number of seconds between two periodic checkpoints.
        Support multiple time unit suffix(case insensitive), as described
        in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.txns</name>
      <value>1000000</value>
      <description>The Secondary NameNode or CheckpointNode will create a checkpoint
      of the namespace every 'dfs.namenode.checkpoint.txns' transactions, regardless
      of whether 'dfs.namenode.checkpoint.period' has expired.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.check.period</name>
      <value>60s</value>
      <description>The SecondaryNameNode and CheckpointNode will poll the NameNode
      every 'dfs.namenode.checkpoint.check.period' seconds to query the number
      of uncheckpointed transactions. Support multiple time unit suffix(case insensitive),
      as described in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.max-retries</name>
      <value>3</value>
      <description>The SecondaryNameNode retries failed checkpointing. If the 
      failure occurs while loading fsimage or replaying edits, the number of
      retries is limited by this variable. 
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.checkpoint.check.quiet-multiplier</name>
      <value>1.5</value>
      <description>
        Used to calculate the amount of time between retries when in the 'quiet' period
        for creating checkpoints (active namenode already has an up-to-date image from another
        checkpointer), so we wait a multiplier of the dfs.namenode.checkpoint.check.period before
        retrying the checkpoint because another node likely is already managing the checkpoints,
        allowing us to save bandwidth to transfer checkpoints that don't need to be used.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.num.checkpoints.retained</name>
      <value>2</value>
      <description>The number of image checkpoint files (fsimage_*) that will be retained by
      the NameNode and Secondary NameNode in their storage directories. All edit
      logs (stored on edits_* files) necessary to recover an up-to-date namespace from the oldest retained
      checkpoint will also be retained.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.num.extra.edits.retained</name>
      <value>1000000</value>
      <description>The number of extra transactions which should be retained
      beyond what is minimally necessary for a NN restart.
      It does not translate directly to file's age, or the number of files kept,
      but to the number of transactions (here "edits" means transactions).
      One edit file may contain several transactions (edits).
      During checkpoint, NameNode will identify the total number of edits to retain as extra by
      checking the latest checkpoint transaction value, subtracted by the value of this property.
      Then, it scans edits files to identify the older ones that don't include the computed range of
      retained transactions that are to be kept around, and purges them subsequently.
      The retainment can be useful for audit purposes or for an HA setup where a remote Standby Node may have
      been offline for some time and need to have a longer backlog of retained
      edits in order to start again.
      Typically each edit is on the order of a few hundred bytes, so the default
      of 1 million edits should be on the order of hundreds of MBs or low GBs.
    
      NOTE: Fewer extra edits may be retained than value specified for this setting
      if doing so would mean that more segments would be retained than the number
      configured by dfs.namenode.max.extra.edits.segments.retained.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.max.extra.edits.segments.retained</name>
      <value>10000</value>
      <description>The maximum number of extra edit log segments which should be retained
      beyond what is minimally necessary for a NN restart. When used in conjunction with
      dfs.namenode.num.extra.edits.retained, this configuration property serves to cap
      the number of extra edits files to a reasonable value.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.delegation.key.update-interval</name>
      <value>86400000</value>
      <description>The update interval for master key for delegation tokens 
           in the namenode in milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.delegation.token.max-lifetime</name>
      <value>604800000</value>
      <description>The maximum lifetime in milliseconds for which a delegation 
          token is valid.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.delegation.token.renew-interval</name>
      <value>86400000</value>
      <description>The renewal interval for delegation token in milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.failed.volumes.tolerated</name>
      <value>0</value>
      <description>The number of volumes that are allowed to
      fail before a datanode stops offering service. By default
      any volume failure will cause a datanode to shutdown.
      </description>
    </property>
    
    <property>
      <name>dfs.image.compress</name>
      <value>false</value>
      <description>Should the dfs image be compressed?
      </description>
    </property>
    
    <property>
      <name>dfs.image.compression.codec</name>
      <value>org.apache.hadoop.io.compress.DefaultCodec</value>
      <description>If the dfs image is compressed, how should they be compressed?
                   This has to be a codec defined in io.compression.codecs.
      </description>
    </property>
    
    <property>
      <name>dfs.image.transfer.timeout</name>
      <value>60000</value>
      <description>
            Socket timeout for the HttpURLConnection instance used in the image
            transfer. This is measured in milliseconds.
            This timeout prevents client hangs if the connection is idle
            for this configured timeout, during image transfer.
      </description>
    </property>
    
    <property>
      <name>dfs.image.transfer.bandwidthPerSec</name>
      <value>0</value>
      <description>
            Maximum bandwidth used for regular image transfers (instead of
            bootstrapping the standby namenode), in bytes per second.
            This can help keep normal namenode operations responsive during
            checkpointing.
            A default value of 0 indicates that throttling is disabled.
            The maximum bandwidth used for bootstrapping standby namenode is
            configured with dfs.image.transfer-bootstrap-standby.bandwidthPerSec.
      </description>
    </property>
    
      <property>
        <name>dfs.image.transfer-bootstrap-standby.bandwidthPerSec</name>
        <value>0</value>
        <description>
          Maximum bandwidth used for transferring image to bootstrap standby
          namenode, in bytes per second.
          A default value of 0 indicates that throttling is disabled. This default
          value should be used in most cases, to ensure timely HA operations.
          The maximum bandwidth used for regular image transfers is configured
          with dfs.image.transfer.bandwidthPerSec.
        </description>
      </property>
    
    <property>
      <name>dfs.image.transfer.chunksize</name>
      <value>65536</value>
      <description>
            Chunksize in bytes to upload the checkpoint.
            Chunked streaming is used to avoid internal buffering of contents
            of image file of huge size.
      </description>
    </property>
    
    <property>
      <name>dfs.edit.log.transfer.timeout</name>
      <value>30000</value>
      <description>
        Socket timeout for edit log transfer in milliseconds. This timeout
        should be configured such that normal edit log transfer for journal
        node syncing can complete successfully.
      </description>
    </property>
    
    <property>
      <name>dfs.edit.log.transfer.bandwidthPerSec</name>
      <value>0</value>
      <description>
        Maximum bandwidth used for transferring edit log to between journal nodes
        for syncing, in bytes per second.
        A default value of 0 indicates that throttling is disabled.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.support.allow.format</name>
      <value>true</value>
      <description>Does HDFS namenode allow itself to be formatted?
                   You may consider setting this to false for any production
                   cluster, to avoid any possibility of formatting a running DFS.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.max.transfer.threads</name>
      <value>4096</value>
      <description>
            Specifies the maximum number of threads to use for transferring data
            in and out of the DN.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.scan.period.hours</name>
      <value>504</value>
      <description>
            If this is positive, the DataNode will not scan any
            individual block more than once in the specified scan period.
            If this is negative, the block scanner is disabled.
            If this is set to zero, then the default value of 504 hours
            or 3 weeks is used. Prior versions of HDFS incorrectly documented
            that setting this key to zero will disable the block scanner.
      </description>
    </property>
    
    <property>
      <name>dfs.block.scanner.volume.bytes.per.second</name>
      <value>1048576</value>
      <description>
            If this is 0, the DataNode's block scanner will be disabled.  If this
            is positive, this is the number of bytes per second that the DataNode's
            block scanner will try to scan from each volume.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.readahead.bytes</name>
      <value>4194304</value>
      <description>
            While reading block files, if the Hadoop native libraries are available,
            the datanode can use the posix_fadvise system call to explicitly
            page data into the operating system buffer cache ahead of the current
            reader's position. This can improve performance especially when
            disks are highly contended.
    
            This configuration specifies the number of bytes ahead of the current
            read position which the datanode will attempt to read ahead. This
            feature may be disabled by configuring this property to 0.
    
            If the native libraries are not available, this configuration has no
            effect.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.drop.cache.behind.reads</name>
      <value>false</value>
      <description>
            In some workloads, the data read from HDFS is known to be significantly
            large enough that it is unlikely to be useful to cache it in the
            operating system buffer cache. In this case, the DataNode may be
            configured to automatically purge all data from the buffer cache
            after it is delivered to the client. This behavior is automatically
            disabled for workloads which read only short sections of a block
            (e.g HBase random-IO workloads).
    
            This may improve performance for some workloads by freeing buffer
            cache space usage for more cacheable data.
    
            If the Hadoop native libraries are not available, this configuration
            has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.drop.cache.behind.writes</name>
      <value>false</value>
      <description>
            In some workloads, the data written to HDFS is known to be significantly
            large enough that it is unlikely to be useful to cache it in the
            operating system buffer cache. In this case, the DataNode may be
            configured to automatically purge all data from the buffer cache
            after it is written to disk.
    
            This may improve performance for some workloads by freeing buffer
            cache space usage for more cacheable data.
    
            If the Hadoop native libraries are not available, this configuration
            has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.sync.behind.writes</name>
      <value>false</value>
      <description>
            If this configuration is enabled, the datanode will instruct the
            operating system to enqueue all written data to the disk immediately
            after it is written. This differs from the usual OS policy which
            may wait for up to 30 seconds before triggering writeback.
    
            This may improve performance for some workloads by smoothing the
            IO profile for data written to disk.
    
            If the Hadoop native libraries are not available, this configuration
            has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.max.attempts</name>
      <value>15</value>
      <description>
        Expert only. The number of client failover attempts that should be
        made before the failover is considered failed.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.sleep.base.millis</name>
      <value>500</value>
      <description>
        Expert only. The time to wait, in milliseconds, between failover
        attempts increases exponentially as a function of the number of
        attempts made so far, with a random factor of +/- 50%. This option
        specifies the base value used in the failover calculation. The
        first failover will retry immediately. The 2nd failover attempt
        will delay at least dfs.client.failover.sleep.base.millis
        milliseconds. And so on.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.sleep.max.millis</name>
      <value>15000</value>
      <description>
        Expert only. The time to wait, in milliseconds, between failover
        attempts increases exponentially as a function of the number of
        attempts made so far, with a random factor of +/- 50%. This option
        specifies the maximum value to wait between failovers. 
        Specifically, the time between two failover attempts will not
        exceed +/- 50% of dfs.client.failover.sleep.max.millis
        milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.connection.retries</name>
      <value>0</value>
      <description>
        Expert only. Indicates the number of retries a failover IPC client
        will make to establish a server connection.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.connection.retries.on.timeouts</name>
      <value>0</value>
      <description>
        Expert only. The number of retry attempts a failover IPC client
        will make on socket timeout when establishing a server connection.
      </description>
    </property>
    
    <property>
      <name>dfs.client.datanode-restart.timeout</name>
      <value>30s</value>
      <description>
        Expert only. The time to wait, in seconds, from reception of an
        datanode shutdown notification for quick restart, until declaring
        the datanode dead and invoking the normal recovery mechanisms.
        The notification is sent by a datanode when it is being shutdown
        using the shutdownDatanode admin command with the upgrade option.
        Support multiple time unit suffix(case insensitive), as described
        in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.nameservices</name>
      <value></value>
      <description>
        Comma-separated list of nameservices.
      </description>
    </property>
    
    <property>
      <name>dfs.nameservice.id</name>
      <value></value>
      <description>
        The ID of this nameservice. If the nameservice ID is not
        configured or more than one nameservice is configured for
        dfs.nameservices it is determined automatically by
        matching the local node's address with the configured address.
      </description>
    </property>
    
    <property>
      <name>dfs.internal.nameservices</name>
      <value></value>
      <description>
        Comma-separated list of nameservices that belong to this cluster.
        Datanode will report to all the nameservices in this list. By default
        this is set to the value of dfs.nameservices.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.namenodes.EXAMPLENAMESERVICE</name>
      <value></value>
      <description>
        The prefix for a given nameservice, contains a comma-separated
        list of namenodes for a given nameservice (eg EXAMPLENAMESERVICE).
    
        Unique identifiers for each NameNode in the nameservice, delimited by
        commas. This will be used by DataNodes to determine all the NameNodes
        in the cluster. For example, if you used “mycluster” as the nameservice
        ID previously, and you wanted to use “nn1” and “nn2” as the individual
        IDs of the NameNodes, you would configure a property
        dfs.ha.namenodes.mycluster, and its value "nn1,nn2".
      </description>
    </property>
    
    <property>
      <name>dfs.ha.namenode.id</name>
      <value></value>
      <description>
        The ID of this namenode. If the namenode ID is not configured it
        is determined automatically by matching the local node's address
        with the configured address.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.log-roll.period</name>
      <value>120s</value>
      <description>
        How often, in seconds, the StandbyNode should ask the active to
        roll edit logs. Since the StandbyNode only reads from finalized
        log segments, the StandbyNode will only be as up-to-date as how
        often the logs are rolled. Note that failover triggers a log roll
        so the StandbyNode will be up to date before it becomes active.
        Support multiple time unit suffix(case insensitive), as described
        in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.tail-edits.period</name>
      <value>60s</value>
      <description>
        How often, in seconds, the StandbyNode should check for new
        finalized log segments in the shared edits log.
        Support multiple time unit suffix(case insensitive), as described
        in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.tail-edits.namenode-retries</name>
      <value>3</value>
      <description>
        Number of retries to use when contacting the namenode when tailing the log.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.tail-edits.rolledits.timeout</name>
      <value>60</value>
      <description>The timeout in seconds of calling rollEdits RPC on Active NN.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.automatic-failover.enabled</name>
      <value>false</value>
      <description>
        Whether automatic failover is enabled. See the HDFS High
        Availability documentation for details on automatic HA
        configuration.
      </description>
    </property>
    
    <property>
      <name>dfs.client.use.datanode.hostname</name>
      <value>false</value>
      <description>Whether clients should use datanode hostnames when
        connecting to datanodes.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.use.datanode.hostname</name>
      <value>false</value>
      <description>Whether datanodes should use datanode hostnames when
        connecting to other datanodes for data transfer.
      </description>
    </property>
    
    <property>
      <name>dfs.client.local.interfaces</name>
      <value></value>
      <description>A comma separated list of network interface names to use
        for data transfer between the client and datanodes. When creating
        a connection to read from or write to a datanode, the client
        chooses one of the specified interfaces at random and binds its
        socket to the IP of that interface. Individual names may be
        specified as either an interface name (eg "eth0"), a subinterface
        name (eg "eth0:0"), or an IP address (which may be specified using
        CIDR notation to match a range of IPs).
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.shared.file.descriptor.paths</name>
      <value>/dev/shm,/tmp</value>
      <description>
        A comma-separated list of paths to use when creating file descriptors that
        will be shared between the DataNode and the DFSClient.  Typically we use
        /dev/shm, so that the file descriptors will not be written to disk.
        Systems that don't have /dev/shm will fall back to /tmp by default.
      </description>
    </property>
    
    <property>
      <name>dfs.short.circuit.shared.memory.watcher.interrupt.check.ms</name>
      <value>60000</value>
      <description>
        The length of time in milliseconds that the short-circuit shared memory
        watcher will go between checking for java interruptions sent from other
        threads.  This is provided mainly for unit tests.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.kerberos.principal</name>
      <value></value>
      <description>
        The NameNode service principal. This is typically set to
        nn/_HOST@REALM.TLD. Each NameNode will substitute _HOST with its
        own fully qualified hostname at startup. The _HOST placeholder
        allows using the same configuration setting on both NameNodes
        in an HA setup.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.keytab.file</name>
      <value></value>
      <description>
        The keytab file used by each NameNode daemon to login as its
        service principal. The principal name is configured with
        dfs.namenode.kerberos.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.kerberos.principal</name>
      <value></value>
      <description>
        The DataNode service principal. This is typically set to
        dn/_HOST@REALM.TLD. Each DataNode will substitute _HOST with its
        own fully qualified hostname at startup. The _HOST placeholder
        allows using the same configuration setting on all DataNodes.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.keytab.file</name>
      <value></value>
      <description>
        The keytab file used by each DataNode daemon to login as its
        service principal. The principal name is configured with
        dfs.datanode.kerberos.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.kerberos.principal</name>
      <value></value>
      <description>
        The JournalNode service principal. This is typically set to
        jn/_HOST@REALM.TLD. Each JournalNode will substitute _HOST with its
        own fully qualified hostname at startup. The _HOST placeholder
        allows using the same configuration setting on all JournalNodes.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.keytab.file</name>
      <value></value>
      <description>
        The keytab file used by each JournalNode daemon to login as its
        service principal. The principal name is configured with
        dfs.journalnode.kerberos.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.kerberos.internal.spnego.principal</name>
      <value>${dfs.web.authentication.kerberos.principal}</value>
      <description>
        The server principal used by the NameNode for web UI SPNEGO
        authentication when Kerberos security is enabled. This is
        typically set to HTTP/_HOST@REALM.TLD The SPNEGO server principal
        begins with the prefix HTTP/ by convention.
    
        If the value is '*', the web server will attempt to login with
        every principal specified in the keytab file
        dfs.web.authentication.kerberos.keytab.
    </description>
    </property>
    
    <property>
      <name>dfs.journalnode.kerberos.internal.spnego.principal</name>
      <value></value>
      <description>
        The server principal used by the JournalNode HTTP Server for
        SPNEGO authentication when Kerberos security is enabled. This is
        typically set to HTTP/_HOST@REALM.TLD. The SPNEGO server principal
        begins with the prefix HTTP/ by convention.
    
        If the value is '*', the web server will attempt to login with
        every principal specified in the keytab file
        dfs.web.authentication.kerberos.keytab.
    
        For most deployments this can be set to ${dfs.web.authentication.kerberos.principal}
        i.e use the value of dfs.web.authentication.kerberos.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.secondary.namenode.kerberos.internal.spnego.principal</name>
      <value>${dfs.web.authentication.kerberos.principal}</value>
      <description>
        The server principal used by the Secondary NameNode for web UI SPNEGO
        authentication when Kerberos security is enabled. Like all other
        Secondary NameNode settings, it is ignored in an HA setup.
    
        If the value is '*', the web server will attempt to login with
        every principal specified in the keytab file
        dfs.web.authentication.kerberos.keytab.
      </description>
    </property>
    
    <property>
      <name>dfs.web.authentication.kerberos.principal</name>
      <value></value>
      <description>
        The server principal used by the NameNode for WebHDFS SPNEGO
        authentication.
    
        Required when WebHDFS and security are enabled. In most secure clusters this
        setting is also used to specify the values for
        dfs.namenode.kerberos.internal.spnego.principal and
        dfs.journalnode.kerberos.internal.spnego.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.web.authentication.kerberos.keytab</name>
      <value></value>
      <description>
        The keytab file for the principal corresponding to
        dfs.web.authentication.kerberos.principal.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.kerberos.principal.pattern</name>
      <value>*</value>
      <description>
        A client-side RegEx that can be configured to control
        allowed realms to authenticate with (useful in cross-realm env.)
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.avoid.read.stale.datanode</name>
      <value>false</value>
      <description>
        Indicate whether or not to avoid reading from "stale" datanodes whose
        heartbeat messages have not been received by the namenode 
        for more than a specified time interval. Stale datanodes will be
        moved to the end of the node list returned for reading. See
        dfs.namenode.avoid.write.stale.datanode for a similar setting for writes.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.avoid.write.stale.datanode</name>
      <value>false</value>
      <description>
        Indicate whether or not to avoid writing to "stale" datanodes whose 
        heartbeat messages have not been received by the namenode 
        for more than a specified time interval. Writes will avoid using 
        stale datanodes unless more than a configured ratio 
        (dfs.namenode.write.stale.datanode.ratio) of datanodes are marked as 
        stale. See dfs.namenode.avoid.read.stale.datanode for a similar setting
        for reads.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.stale.datanode.interval</name>
      <value>30000</value>
      <description>
        Default time interval in milliseconds for marking a datanode as "stale",
        i.e., if the namenode has not received heartbeat msg from a datanode for
        more than this time interval, the datanode will be marked and treated 
        as "stale" by default. The stale interval cannot be too small since 
        otherwise this may cause too frequent change of stale states. 
        We thus set a minimum stale interval value (the default value is 3 times 
        of heartbeat interval) and guarantee that the stale interval cannot be less
        than the minimum value. A stale data node is avoided during lease/block
        recovery. It can be conditionally avoided for reads (see
        dfs.namenode.avoid.read.stale.datanode) and for writes (see
        dfs.namenode.avoid.write.stale.datanode).
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.write.stale.datanode.ratio</name>
      <value>0.5f</value>
      <description>
        When the ratio of number stale datanodes to total datanodes marked
        is greater than this ratio, stop avoiding writing to stale nodes so
        as to prevent causing hotspots.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.invalidate.work.pct.per.iteration</name>
      <value>0.32f</value>
      <description>
        *Note*: Advanced property. Change with caution.
        This determines the percentage amount of block
        invalidations (deletes) to do over a single DN heartbeat
        deletion command. The final deletion count is determined by applying this
        percentage to the number of live nodes in the system.
        The resultant number is the number of blocks from the deletion list
        chosen for proper invalidation over a single heartbeat of a single DN.
        Value should be a positive, non-zero percentage in float notation (X.Yf),
        with 1.0f meaning 100%.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.replication.work.multiplier.per.iteration</name>
      <value>2</value>
      <description>
        *Note*: Advanced property. Change with caution.
        This determines the total amount of block transfers to begin in
        parallel at a DN, for replication, when such a command list is being
        sent over a DN heartbeat by the NN. The actual number is obtained by
        multiplying this multiplier with the total number of live nodes in the
        cluster. The result number is the number of blocks to begin transfers
        immediately for, per DN heartbeat. This number can be any positive,
        non-zero integer.
      </description>
    </property>
    
    <property>
      <name>nfs.server.port</name>
      <value>2049</value>
      <description>
          Specify the port number used by Hadoop NFS.
      </description>
    </property>
    
    <property>
      <name>nfs.mountd.port</name>
      <value>4242</value>
      <description>
          Specify the port number used by Hadoop mount daemon.
      </description>
    </property>
    
    <property>    
      <name>nfs.dump.dir</name>
      <value>/tmp/.hdfs-nfs</value>
      <description>
        This directory is used to temporarily save out-of-order writes before
        writing to HDFS. For each file, the out-of-order writes are dumped after
        they are accumulated to exceed certain threshold (e.g., 1MB) in memory. 
        One needs to make sure the directory has enough space.
      </description>
    </property>
    
    <property>
      <name>nfs.rtmax</name>
      <value>1048576</value>
      <description>This is the maximum size in bytes of a READ request
        supported by the NFS gateway. If you change this, make sure you
        also update the nfs mount's rsize(add rsize= # of bytes to the 
        mount directive).
      </description>
    </property>
    
    <property>
      <name>nfs.wtmax</name>
      <value>1048576</value>
      <description>This is the maximum size in bytes of a WRITE request
        supported by the NFS gateway. If you change this, make sure you
        also update the nfs mount's wsize(add wsize= # of bytes to the 
        mount directive).
      </description>
    </property>
    
    <property>
      <name>nfs.keytab.file</name>
      <value></value>
      <description>
        *Note*: Advanced property. Change with caution.
        This is the path to the keytab file for the hdfs-nfs gateway.
        This is required when the cluster is kerberized.
      </description>
    </property>
    
    <property>
      <name>nfs.kerberos.principal</name>
      <value></value>
      <description>
        *Note*: Advanced property. Change with caution.
        This is the name of the kerberos principal. This is required when
        the cluster is kerberized.It must be of this format:
        nfs-gateway-user/nfs-gateway-host@kerberos-realm
      </description>
    </property>
    
    <property>
      <name>nfs.allow.insecure.ports</name>
      <value>true</value>
      <description>
        When set to false, client connections originating from unprivileged ports
        (those above 1023) will be rejected. This is to ensure that clients
        connecting to this NFS Gateway must have had root privilege on the machine
        where they're connecting from.
      </description>
    </property>
    
    <property>
      <name>hadoop.fuse.connection.timeout</name>
      <value>300</value>
      <description>
        The minimum number of seconds that we'll cache libhdfs connection objects
        in fuse_dfs. Lower values will result in lower memory consumption; higher
        values may speed up access by avoiding the overhead of creating new
        connection objects.
      </description>
    </property>
    
    <property>
      <name>hadoop.fuse.timer.period</name>
      <value>5</value>
      <description>
        The number of seconds between cache expiry checks in fuse_dfs. Lower values
        will result in fuse_dfs noticing changes to Kerberos ticket caches more
        quickly.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.metrics.logger.period.seconds</name>
      <value>600</value>
      <description>
        This setting controls how frequently the NameNode logs its metrics. The
        logging configuration must also define one or more appenders for
        NameNodeMetricsLog for the metrics to be logged.
        NameNode metrics logging is disabled if this value is set to zero or
        less than zero.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.metrics.logger.period.seconds</name>
      <value>600</value>
      <description>
        This setting controls how frequently the DataNode logs its metrics. The
        logging configuration must also define one or more appenders for
        DataNodeMetricsLog for the metrics to be logged.
        DataNode metrics logging is disabled if this value is set to zero or
        less than zero.
      </description>
    </property>
    
    <property>
      <name>dfs.metrics.percentiles.intervals</name>
      <value></value>
      <description>
        Comma-delimited set of integers denoting the desired rollover intervals 
        (in seconds) for percentile latency metrics on the Namenode and Datanode.
        By default, percentile latency metrics are disabled.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.peer.stats.enabled</name>
      <value>false</value>
      <description>
        A switch to turn on/off tracking DataNode peer statistics.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.outliers.report.interval</name>
      <value>30m</value>
      <description>
        This setting controls how frequently DataNodes will report their peer
        latencies to the NameNode via heartbeats.  This setting supports
        multiple time unit suffixes as described in dfs.heartbeat.interval.
        If no suffix is specified then milliseconds is assumed.
    
        It is ignored if dfs.datanode.peer.stats.enabled is false.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.fileio.profiling.sampling.percentage</name>
      <value>0</value>
      <description>
        This setting controls the percentage of file I/O events which will be
        profiled for DataNode disk statistics. The default value of 0 disables
        disk statistics. Set to an integer value between 1 and 100 to enable disk
        statistics.
      </description>
    </property>
    
    <property>
      <name>hadoop.user.group.metrics.percentiles.intervals</name>
      <value></value>
      <description>
        A comma-separated list of the granularity in seconds for the metrics
        which describe the 50/75/90/95/99th percentile latency for group resolution
        in milliseconds.
        By default, percentile latency metrics are disabled.
      </description>
    </property>
    
    <property>
      <name>dfs.encrypt.data.transfer</name>
      <value>false</value>
      <description>
        Whether or not actual block data that is read/written from/to HDFS should
        be encrypted on the wire. This only needs to be set on the NN and DNs,
        clients will deduce this automatically. It is possible to override this setting 
        per connection by specifying custom logic via dfs.trustedchannel.resolver.class. 
      </description>
    </property>
    
    <property>
      <name>dfs.encrypt.data.transfer.algorithm</name>
      <value></value>
      <description>
        This value may be set to either "3des" or "rc4". If nothing is set, then
        the configured JCE default on the system is used (usually 3DES.) It is
        widely believed that 3DES is more cryptographically secure, but RC4 is
        substantially faster.
        
        Note that if AES is supported by both the client and server then this 
        encryption algorithm will only be used to initially transfer keys for AES.
        (See dfs.encrypt.data.transfer.cipher.suites.)
      </description>
    </property>
    
    <property>
      <name>dfs.encrypt.data.transfer.cipher.suites</name>
      <value></value>
      <description>
        This value may be either undefined or AES/CTR/NoPadding.  If defined, then
        dfs.encrypt.data.transfer uses the specified cipher suite for data
        encryption.  If not defined, then only the algorithm specified in
        dfs.encrypt.data.transfer.algorithm is used.  By default, the property is
        not defined.
      </description>
    </property>
    
    <property>
      <name>dfs.encrypt.data.transfer.cipher.key.bitlength</name>
      <value>128</value>
      <description>
        The key bitlength negotiated by dfsclient and datanode for encryption.
        This value may be set to either 128, 192 or 256.
      </description>
    </property>
    
    <property>
      <name>dfs.trustedchannel.resolver.class</name>
      <value></value>
      <description>
          TrustedChannelResolver is used to determine whether a channel 
          is trusted for plain data transfer. The TrustedChannelResolver is
          invoked on both client and server side. If the resolver indicates 
          that the channel is trusted, then the data transfer will not be 
          encrypted even if dfs.encrypt.data.transfer is set to true. The
          default implementation returns false indicating that the channel 
          is not trusted.
      </description>
    </property>
    
    <property>
      <name>dfs.data.transfer.protection</name>
      <value></value>
      <description>
        A comma-separated list of SASL protection values used for secured
        connections to the DataNode when reading or writing block data.  Possible
        values are authentication, integrity and privacy.  authentication means
        authentication only and no integrity or privacy; integrity implies
        authentication and integrity are enabled; and privacy implies all of
        authentication, integrity and privacy are enabled.  If
        dfs.encrypt.data.transfer is set to true, then it supersedes the setting for
        dfs.data.transfer.protection and enforces that all connections must use a
        specialized encrypted SASL handshake.  This property is ignored for
        connections to a DataNode listening on a privileged port.  In this case, it
        is assumed that the use of a privileged port establishes sufficient trust.
      </description>
    </property>
    
    <property>
      <name>dfs.data.transfer.saslproperties.resolver.class</name>
      <value></value>
      <description>
        SaslPropertiesResolver used to resolve the QOP used for a connection to the
        DataNode when reading or writing block data. If not specified, the value of
        hadoop.security.saslproperties.resolver.class is used as the default value.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.rpc-address</name>
      <value>0.0.0.0:8485</value>
      <description>
        The JournalNode RPC server address and port.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.rpc-bind-host</name>
      <value></value>
      <description>
        The actual address the RPC server will bind to. If this optional address is
        set, it overrides only the hostname portion of dfs.journalnode.rpc-address.
        This is useful for making the JournalNode listen on all interfaces by
        setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.http-address</name>
      <value>0.0.0.0:8480</value>
      <description>
        The address and port the JournalNode HTTP server listens on.
        If the port is 0 then the server will start on a free port.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.http-bind-host</name>
      <value></value>
      <description>
        The actual address the HTTP server will bind to. If this optional address
        is set, it overrides only the hostname portion of
        dfs.journalnode.http-address. This is useful for making the JournalNode
        HTTP server listen on allinterfaces by setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.https-address</name>
      <value>0.0.0.0:8481</value>
      <description>
        The address and port the JournalNode HTTPS server listens on.
        If the port is 0 then the server will start on a free port.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.https-bind-host</name>
      <value></value>
      <description>
        The actual address the HTTP server will bind to. If this optional address
        is set, it overrides only the hostname portion of
        dfs.journalnode.https-address. This is useful for making the JournalNode
        HTTP server listen on all interfaces by setting it to 0.0.0.0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.audit.loggers</name>
      <value>default</value>
      <description>
        List of classes implementing audit loggers that will receive audit events.
        These should be implementations of org.apache.hadoop.hdfs.server.namenode.AuditLogger.
        The special value "default" can be used to reference the default audit
        logger, which uses the configured log system. Installing custom audit loggers
        may affect the performance and stability of the NameNode. Refer to the custom
        logger's documentation for more details.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.available-space-volume-choosing-policy.balanced-space-threshold</name>
      <value>10737418240</value> 
      <description>
        Only used when the dfs.datanode.fsdataset.volume.choosing.policy is set to
        org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy.
        This setting controls how much DN volumes are allowed to differ in terms of
        bytes of free disk space before they are considered imbalanced. If the free
        space of all the volumes are within this range of each other, the volumes
        will be considered balanced and block assignments will be done on a pure
        round robin basis.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.available-space-volume-choosing-policy.balanced-space-preference-fraction</name>
      <value>0.75f</value>
      <description>
        Only used when the dfs.datanode.fsdataset.volume.choosing.policy is set to
        org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy.
        This setting controls what percentage of new block allocations will be sent
        to volumes with more available disk space than others. This setting should
        be in the range 0.0 - 1.0, though in practice 0.5 - 1.0, since there should
        be no reason to prefer that volumes with less available disk space receive
        more block allocations.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.noeditlogchannelflush</name>
      <value>false</value>
      <description>
        Specifies whether to flush edit log file channel. When set, expensive
        FileChannel#force calls are skipped and synchronous disk writes are
        enabled instead by opening the edit log file with RandomAccessFile("rws")
        flags. This can significantly improve the performance of edit log writes
        on the Windows platform.
        Note that the behavior of the "rws" flags is platform and hardware specific
        and might not provide the same level of guarantees as FileChannel#force.
        For example, the write will skip the disk-cache on SAS and SCSI devices
        while it might not on SATA devices. This is an expert level setting,
        change with caution.
      </description>
    </property>
    
    <property>
      <name>dfs.client.cache.drop.behind.writes</name>
      <value></value>
      <description>
        Just like dfs.datanode.drop.cache.behind.writes, this setting causes the
        page cache to be dropped behind HDFS writes, potentially freeing up more
        memory for other uses.  Unlike dfs.datanode.drop.cache.behind.writes, this
        is a client-side setting rather than a setting for the entire datanode.
        If present, this setting will override the DataNode default.
    
        If the native libraries are not available to the DataNode, this
        configuration has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.client.cache.drop.behind.reads</name>
      <value></value>
      <description>
        Just like dfs.datanode.drop.cache.behind.reads, this setting causes the
        page cache to be dropped behind HDFS reads, potentially freeing up more
        memory for other uses.  Unlike dfs.datanode.drop.cache.behind.reads, this
        is a client-side setting rather than a setting for the entire datanode.  If
        present, this setting will override the DataNode default.
    
        If the native libraries are not available to the DataNode, this
        configuration has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.client.cache.readahead</name>
      <value></value>
      <description>
        When using remote reads, this setting causes the datanode to
        read ahead in the block file using posix_fadvise, potentially decreasing
        I/O wait times.  Unlike dfs.datanode.readahead.bytes, this is a client-side
        setting rather than a setting for the entire datanode.  If present, this
        setting will override the DataNode default.
    
        When using local reads, this setting determines how much readahead we do in
        BlockReaderLocal.
    
        If the native libraries are not available to the DataNode, this
        configuration has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.client.server-defaults.validity.period.ms</name>
      <value>3600000</value>
      <description>
        The amount of milliseconds after which cached server defaults are updated.
    
        By default this parameter is set to 1 hour.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.enable.retrycache</name>
      <value>true</value>
      <description>
        This enables the retry cache on the namenode. Namenode tracks for
        non-idempotent requests the corresponding response. If a client retries the
        request, the response from the retry cache is sent. Such operations
        are tagged with annotation @AtMostOnce in namenode protocols. It is
        recommended that this flag be set to true. Setting it to false, will result
        in clients getting failure responses to retried request. This flag must 
        be enabled in HA setup for transparent fail-overs.
    
        The entries in the cache have expiration time configurable
        using dfs.namenode.retrycache.expirytime.millis.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.retrycache.expirytime.millis</name>
      <value>600000</value>
      <description>
        The time for which retry cache entries are retained.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.retrycache.heap.percent</name>
      <value>0.03f</value>
      <description>
        This parameter configures the heap size allocated for retry cache
        (excluding the response cached). This corresponds to approximately
        4096 entries for every 64MB of namenode process java heap size.
        Assuming retry cache entry expiration time (configured using
        dfs.namenode.retrycache.expirytime.millis) of 10 minutes, this
        enables retry cache to support 7 operations per second sustained
        for 10 minutes. As the heap size is increased, the operation rate
        linearly increases.
      </description>
    </property>
    
    <property>
      <name>dfs.client.mmap.enabled</name>
      <value>true</value>
      <description>
        If this is set to false, the client won't attempt to perform memory-mapped reads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.mmap.cache.size</name>
      <value>256</value>
      <description>
        When zero-copy reads are used, the DFSClient keeps a cache of recently used
        memory mapped regions.  This parameter controls the maximum number of
        entries that we will keep in that cache.
    
        The larger this number is, the more file descriptors we will potentially
        use for memory-mapped files.  mmaped files also use virtual address space.
        You may need to increase your ulimit virtual address space limits before
        increasing the client mmap cache size.
    
        Note that you can still do zero-copy reads when this size is set to 0.
      </description>
    </property>
    
    <property>
      <name>dfs.client.mmap.cache.timeout.ms</name>
      <value>3600000</value>
      <description>
        The minimum length of time that we will keep an mmap entry in the cache
        between uses.  If an entry is in the cache longer than this, and nobody
        uses it, it will be removed by a background thread.
      </description>
    </property>
    
    <property>
      <name>dfs.client.mmap.retry.timeout.ms</name>
      <value>300000</value>
      <description>
        The minimum amount of time that we will wait before retrying a failed mmap
        operation.
      </description>
    </property>
    
    <property>
      <name>dfs.client.short.circuit.replica.stale.threshold.ms</name>
      <value>1800000</value>
      <description>
        The maximum amount of time that we will consider a short-circuit replica to
        be valid, if there is no communication from the DataNode.  After this time
        has elapsed, we will re-fetch the short-circuit replica even if it is in
        the cache.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.path.based.cache.block.map.allocation.percent</name>
      <value>0.25</value>
      <description>
        The percentage of the Java heap which we will allocate to the cached blocks
        map.  The cached blocks map is a hash map which uses chained hashing.
        Smaller maps may be accessed more slowly if the number of cached blocks is
        large; larger maps will consume more memory.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.max.locked.memory</name>
      <value>0</value>
      <description>
        The amount of memory in bytes to use for caching of block replicas in
        memory on the datanode. The datanode's maximum locked memory soft ulimit
        (RLIMIT_MEMLOCK) must be set to at least this value, else the datanode
        will abort on startup.
    
        By default, this parameter is set to 0, which disables in-memory caching.
    
        If the native libraries are not available to the DataNode, this
        configuration has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.list.cache.directives.num.responses</name>
      <value>100</value>
      <description>
        This value controls the number of cache directives that the NameNode will
        send over the wire in response to a listDirectives RPC.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.list.cache.pools.num.responses</name>
      <value>100</value>
      <description>
        This value controls the number of cache pools that the NameNode will
        send over the wire in response to a listPools RPC.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.path.based.cache.refresh.interval.ms</name>
      <value>30000</value>
      <description>
        The amount of milliseconds between subsequent path cache rescans.  Path
        cache rescans are when we calculate which blocks should be cached, and on
        what datanodes.
    
        By default, this parameter is set to 30 seconds.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.path.based.cache.retry.interval.ms</name>
      <value>30000</value>
      <description>
        When the NameNode needs to uncache something that is cached, or cache
        something that is not cached, it must direct the DataNodes to do so by
        sending a DNA_CACHE or DNA_UNCACHE command in response to a DataNode
        heartbeat.  This parameter controls how frequently the NameNode will
        resend these commands.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.fsdatasetcache.max.threads.per.volume</name>
      <value>4</value>
      <description>
        The maximum number of threads per volume to use for caching new data
        on the datanode. These threads consume both I/O and CPU. This can affect
        normal datanode operations.
      </description>
    </property>
    
    <property>
      <name>dfs.cachereport.intervalMsec</name>
      <value>10000</value>
      <description>
        Determines cache reporting interval in milliseconds.  After this amount of
        time, the DataNode sends a full report of its cache state to the NameNode.
        The NameNode uses the cache report to update its map of cached blocks to
        DataNode locations.
    
        This configuration has no effect if in-memory caching has been disabled by
        setting dfs.datanode.max.locked.memory to 0 (which is the default).
    
        If the native libraries are not available to the DataNode, this
        configuration has no effect.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edit.log.autoroll.multiplier.threshold</name>
      <value>2.0</value>
      <description>
        Determines when an active namenode will roll its own edit log.
        The actual threshold (in number of edits) is determined by multiplying
        this value by dfs.namenode.checkpoint.txns.
    
        This prevents extremely large edit files from accumulating on the active
        namenode, which can cause timeouts during namenode startup and pose an
        administrative hassle. This behavior is intended as a failsafe for when
        the standby or secondary namenode fail to roll the edit log by the normal
        checkpoint threshold.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edit.log.autoroll.check.interval.ms</name>
      <value>300000</value>
      <description>
        How often an active namenode will check if it needs to roll its edit log,
        in milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.user.provider.user.pattern</name>
      <value>^[A-Za-z_][A-Za-z0-9._-]*[$]?$</value>
      <description>
        Valid pattern for user and group names for webhdfs, it must be a valid java regex.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.acl.provider.permission.pattern</name>
      <value>^(default:)?(user|group|mask|other):[[A-Za-z_][A-Za-z0-9._-]]*:([rwx-]{3})?(,(default:)?(user|group|mask|other):[[A-Za-z_][A-Za-z0-9._-]]*:([rwx-]{3})?)*$</value>
      <description>
        Valid pattern for user and group names in webhdfs acl operations, it must be a valid java regex.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.socket.connect-timeout</name>
      <value>60s</value>
      <description>
        Socket timeout for connecting to WebHDFS servers. This prevents a
        WebHDFS client from hanging if the server hostname is
        misconfigured, or the server does not response before the timeout
        expires. Value is followed by a unit specifier: ns, us, ms, s, m,
        h, d for nanoseconds, microseconds, milliseconds, seconds,
        minutes, hours, days respectively. Values should provide units,
        but milliseconds are assumed.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.socket.read-timeout</name>
      <value>60s</value>
      <description>
        Socket timeout for reading data from WebHDFS servers. This
        prevents a WebHDFS client from hanging if the server stops sending
        data. Value is followed by a unit specifier: ns, us, ms, s, m, h,
        d for nanoseconds, microseconds, milliseconds, seconds, minutes,
        hours, days respectively. Values should provide units,
        but milliseconds are assumed.
      </description>
    </property>
    
    <property>
      <name>dfs.client.context</name>
      <value>default</value>
      <description>
        The name of the DFSClient context that we should use.  Clients that share
        a context share a socket cache and short-circuit cache, among other things.
        You should only change this if you don't want to share with another set of
        threads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.shortcircuit</name>
      <value>false</value>
      <description>
        This configuration parameter turns on short-circuit local reads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.socket.send.buffer.size</name>
      <value>0</value>
      <description>
        Socket send buffer size for a write pipeline in DFSClient side.
        This may affect TCP connection throughput.
        If it is set to zero or negative value,
        no buffer size will be set explicitly,
        thus enable tcp auto-tuning on some system.
        The default value is 0.
      </description>
    </property>
    
    <property>
      <name>dfs.domain.socket.path</name>
      <value></value>
      <description>
        Optional.  This is a path to a UNIX domain socket that will be used for
        communication between the DataNode and local HDFS clients.
        If the string "_PORT" is present in this path, it will be replaced by the
        TCP port of the DataNode.
      </description>
    </property>
    
    <property>
      <name>dfs.domain.socket.disable.interval.seconds</name>
      <value>600</value>
      <description>
        The interval that a DataNode is disabled for future Short-Circuit Reads,
        after an error happens during a Short-Circuit Read. Setting this to 0 will
        not disable Short-Circuit Reads at all after errors happen. Negative values
        are invalid.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.shortcircuit.skip.checksum</name>
      <value>false</value>
      <description>
        If this configuration parameter is set,
        short-circuit local reads will skip checksums.
        This is normally not recommended,
        but it may be useful for special setups.
        You might consider using this
        if you are doing your own checksumming outside of HDFS.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.shortcircuit.streams.cache.size</name>
      <value>256</value>
      <description>
        The DFSClient maintains a cache of recently opened file descriptors.
        This parameter controls the maximum number of file descriptors in the cache.
        Setting this higher will use more file descriptors,
        but potentially provide better performance on workloads
        involving lots of seeks.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.shortcircuit.streams.cache.expiry.ms</name>
      <value>300000</value>
      <description>
        This controls the minimum amount of time
        file descriptors need to sit in the client cache context
        before they can be closed for being inactive for too long.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.shared.file.descriptor.paths</name>
      <value>/dev/shm,/tmp</value>
      <description>
        Comma separated paths to the directory on which
        shared memory segments are created.
        The client and the DataNode exchange information via
        this shared memory segment.
        It tries paths in order until creation of shared memory segment succeeds.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.audit.log.debug.cmdlist</name>
      <value></value>
      <description>
        A comma separated list of NameNode commands that are written to the HDFS
        namenode audit log only if the audit log level is debug.
      </description>
    </property>
    
    <property>
      <name>dfs.client.use.legacy.blockreader.local</name>
      <value>false</value>
      <description>
        Legacy short-circuit reader implementation based on HDFS-2246 is used
        if this configuration parameter is true.
        This is for the platforms other than Linux
        where the new implementation based on HDFS-347 is not available.
      </description>
    </property>
    
    <property>
      <name>dfs.block.local-path-access.user</name>
      <value></value>
      <description>
        Comma separated list of the users allowed to open block files
        on legacy short-circuit local read.
      </description>
    </property>
    
    <property>
      <name>dfs.client.domain.socket.data.traffic</name>
      <value>false</value>
      <description>
        This control whether we will try to pass normal data traffic
        over UNIX domain socket rather than over TCP socket
        on node-local data transfer.
        This is currently experimental and turned off by default.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reject-unresolved-dn-topology-mapping</name>
      <value>false</value>
      <description>
        If the value is set to true, then namenode will reject datanode 
        registration if the topology mapping for a datanode is not resolved and 
        NULL is returned (script defined by net.topology.script.file.name fails 
        to execute). Otherwise, datanode will be registered and the default rack 
        will be assigned as the topology path. Topology paths are important for 
        data resiliency, since they define fault domains. Thus it may be unwanted 
        behavior to allow datanode registration with the default rack if the 
        resolving topology failed.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.xattrs.enabled</name>
      <value>true</value>
      <description>
        Whether support for extended attributes is enabled on the NameNode.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.fs-limits.max-xattrs-per-inode</name>
      <value>32</value>
      <description>
        Maximum number of extended attributes per inode.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.fs-limits.max-xattr-size</name>
      <value>16384</value>
      <description>
        The maximum combined size of the name and value of an extended attribute
        in bytes. It should be larger than 0, and less than or equal to maximum
        size hard limit which is 32768.
      </description>
    </property>
    
    <property>
      <name>dfs.client.slow.io.warning.threshold.ms</name>
      <value>30000</value>
      <description>The threshold in milliseconds at which we will log a slow
        io warning in a dfsclient. By default, this parameter is set to 30000
        milliseconds (30 seconds).
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.slow.io.warning.threshold.ms</name>
      <value>300</value>
      <description>The threshold in milliseconds at which we will log a slow
        io warning in a datanode. By default, this parameter is set to 300
        milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lease-recheck-interval-ms</name>
      <value>2000</value>
      <description>During the release of lease a lock is hold that make any
        operations on the namenode stuck. In order to not block them during
        a too long duration we stop releasing lease after this max lock limit.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.max-lock-hold-to-release-lease-ms</name>
      <value>25</value>
      <description>During the release of lease a lock is hold that make any
        operations on the namenode stuck. In order to not block them during
        a too long duration we stop releasing lease after this max lock limit.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.write-lock-reporting-threshold-ms</name>
      <value>5000</value>
      <description>When a write lock is held on the namenode for a long time,
        this will be logged as the lock is released. This sets how long the
        lock must be held for logging to occur.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.read-lock-reporting-threshold-ms</name>
      <value>5000</value>
      <description>When a read lock is held on the namenode for a long time,
        this will be logged as the lock is released. This sets how long the
        lock must be held for logging to occur.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.lock.detailed-metrics.enabled</name>
      <value>false</value>
      <description>If true, the namenode will keep track of how long various
        operations hold the Namesystem lock for and emit this as metrics. These
        metrics have names of the form FSN(Read|Write)LockNanosOperationName,
        where OperationName denotes the name of the operation that initiated the
        lock hold (this will be OTHER for certain uncategorized operations) and
        they export the hold time values in nanoseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.fslock.fair</name>
      <value>true</value>
      <description>If this is true, the FS Namesystem lock will be used in Fair mode,
        which will help to prevent writer threads from being starved, but can provide
        lower lock throughput. See java.util.concurrent.locks.ReentrantReadWriteLock
        for more information on fair/non-fair locks.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.startup.delay.block.deletion.sec</name>
      <value>0</value>
      <description>The delay in seconds at which we will pause the blocks deletion
        after Namenode startup. By default it's disabled.
        In the case a directory has large number of directories and files are
        deleted, suggested delay is one hour to give the administrator enough time
        to notice large number of pending deletion blocks and take corrective
        action.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.block.id.layout.upgrade.threads</name>
      <value>12</value>
      <description>The number of threads to use when creating hard links from
        current to previous blocks during upgrade of a DataNode to block ID-based
        block layout (see HDFS-6482 for details on the layout).</description>
    </property>
    
    <property>
      <name>dfs.namenode.list.encryption.zones.num.responses</name>
      <value>100</value>
      <description>When listing encryption zones, the maximum number of zones
        that will be returned in a batch. Fetching the list incrementally in
        batches improves namenode performance.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.list.reencryption.status.num.responses</name>
      <value>100</value>
      <description>When listing re-encryption status, the maximum number of zones
        that will be returned in a batch. Fetching the list incrementally in
        batches improves namenode performance.
      </description>
    </property>
    
      <property>
        <name>dfs.namenode.list.openfiles.num.responses</name>
        <value>1000</value>
        <description>
          When listing open files, the maximum number of open files that will be
          returned in a single batch. Fetching the list incrementally in batches
          improves namenode performance.
        </description>
      </property>
    
    <property>
      <name>dfs.namenode.edekcacheloader.interval.ms</name>
      <value>1000</value>
      <description>When KeyProvider is configured, the interval time of warming
        up edek cache on NN starts up / becomes active. All edeks will be loaded
        from KMS into provider cache. The edek cache loader will try to warm up the
        cache until succeed or NN leaves active state.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edekcacheloader.initial.delay.ms</name>
      <value>3000</value>
      <description>When KeyProvider is configured, the time delayed until the first
        attempt to warm up edek cache on NN start up / become active.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reencrypt.sleep.interval</name>
      <value>1m</value>
      <description>Interval the re-encrypt EDEK thread sleeps in the main loop. The
        interval accepts units. If none given, millisecond is assumed.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reencrypt.batch.size</name>
      <value>1000</value>
      <description>How many EDEKs should the re-encrypt thread process in one batch.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reencrypt.throttle.limit.handler.ratio</name>
      <value>1.0</value>
      <description>Throttling ratio for the re-encryption, indicating what fraction
        of time should the re-encrypt handler thread work under NN read lock.
        Larger than 1.0 values are interpreted as 1.0. Negative value or 0 are
        invalid values and will fail NN startup.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reencrypt.throttle.limit.updater.ratio</name>
      <value>1.0</value>
      <description>Throttling ratio for the re-encryption, indicating what fraction
        of time should the re-encrypt updater thread work under NN write lock.
        Larger than 1.0 values are interpreted as 1.0. Negative value or 0 are
        invalid values and will fail NN startup.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reencrypt.edek.threads</name>
      <value>10</value>
      <description>Maximum number of re-encrypt threads to contact the KMS
        and re-encrypt the edeks.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.inotify.max.events.per.rpc</name>
      <value>1000</value>
      <description>Maximum number of events that will be sent to an inotify client
        in a single RPC response. The default value attempts to amortize away
        the overhead for this RPC while avoiding huge memory requirements for the
        client and NameNode (1000 events should consume no more than 1 MB.)
      </description>
    </property>
    
    <property>
      <name>dfs.user.home.dir.prefix</name>
      <value>/user</value>
      <description>The directory to prepend to user name to get the user's
        home direcotry.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.cache.revocation.timeout.ms</name>
      <value>900000</value>
      <description>When the DFSClient reads from a block file which the DataNode is
        caching, the DFSClient can skip verifying checksums.  The DataNode will
        keep the block file in cache until the client is done.  If the client takes
        an unusually long time, though, the DataNode may need to evict the block
        file from the cache anyway.  This value controls how long the DataNode will
        wait for the client to release a replica that it is reading without
        checksums.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.cache.revocation.polling.ms</name>
      <value>500</value>
      <description>How often the DataNode should poll to see if the clients have
        stopped using a replica that the DataNode wants to uncache.
      </description>
    </property>
    
    <property>
      <name>dfs.storage.policy.enabled</name>
      <value>true</value>
      <description>
        Allow users to change the storage policy on files and directories.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.legacy-oiv-image.dir</name>
      <value></value>
      <description>Determines where to save the namespace in the old fsimage format
        during checkpointing by standby NameNode or SecondaryNameNode. Users can
        dump the contents of the old format fsimage by oiv_legacy command. If
        the value is not specified, old format fsimage will not be saved in
        checkpoint.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.top.enabled</name>
      <value>true</value>
      <description>Enable nntop: reporting top users on namenode
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.top.window.num.buckets</name>
      <value>10</value>
      <description>Number of buckets in the rolling window implementation of nntop
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.top.num.users</name>
      <value>10</value>
      <description>Number of top users returned by the top tool
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.top.windows.minutes</name>
      <value>1,5,25</value>
      <description>comma separated list of nntop reporting periods in minutes
      </description>
    </property>
    
    <property>
        <name>dfs.webhdfs.ugi.expire.after.access</name>
        <value>600000</value>
        <description>How long in milliseconds after the last access
          the cached UGI will expire. With 0, never expire.
        </description>
    </property>
    
    <property>
      <name>dfs.namenode.blocks.per.postponedblocks.rescan</name>
      <value>10000</value>
      <description>Number of blocks to rescan for each iteration of
        postponedMisreplicatedBlocks.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.block-pinning.enabled</name>
      <value>false</value>
      <description>Whether pin blocks on favored DataNode.</description>
    </property>
    
    <property>
      <name>dfs.client.block.write.locateFollowingBlock.initial.delay.ms</name>
      <value>400</value>
      <description>The initial delay (unit is ms) for locateFollowingBlock,
        the delay time will increase exponentially(double) for each retry.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.zkfc.nn.http.timeout.ms</name>
      <value>20000</value>
      <description>
        The HTTP connection and read timeout value (unit is ms ) when DFS ZKFC
        tries to get local NN thread dump after local NN becomes
        SERVICE_NOT_RESPONDING or SERVICE_UNHEALTHY.
        If it is set to zero, DFS ZKFC won't get local NN thread dump.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.tail-edits.in-progress</name>
      <value>false</value>
      <description>
        Whether enable standby namenode to tail in-progress edit logs.
        Clients might want to turn it on when they want Standby NN to have
        more up-to-date data.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.ec.system.default.policy</name>
      <value>RS-6-3-1024k</value>
      <description>The default erasure coding policy name will be used
        on the path if no policy name is passed.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.ec.policies.max.cellsize</name>
      <value>4194304</value>
      <description>The maximum cell size of erasure coding policy. Default is 4MB.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ec.reconstruction.stripedread.timeout.millis</name>
      <value>5000</value>
      <description>Datanode striped read timeout in milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ec.reconstruction.stripedread.buffer.size</name>
      <value>65536</value>
      <description>Datanode striped read buffer size.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ec.reconstruction.threads</name>
      <value>8</value>
      <description>
        Number of threads used by the Datanode for background
        reconstruction work.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ec.reconstruction.xmits.weight</name>
      <value>0.5</value>
      <description>
        Datanode uses xmits weight to calculate the relative cost of EC recovery
        tasks comparing to replicated block recovery, of which xmits is always 1.
        Namenode then uses xmits reported from datanode to throttle recovery tasks
        for EC and replicated blocks.
        The xmits of an erasure coding recovery task is calculated as the maximum
        value between the number of read streams and the number of write streams.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.quota.init-threads</name>
      <value>4</value>
      <description>
        The number of concurrent threads to be used in quota initialization. The
        speed of quota initialization also affects the namenode fail-over latency.
        If the size of name space is big, try increasing this.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.transfer.socket.send.buffer.size</name>
      <value>0</value>
      <description>
        Socket send buffer size for DataXceiver (mirroring packets to downstream
        in pipeline). This may affect TCP connection throughput.
        If it is set to zero or negative value, no buffer size will be set
        explicitly, thus enable tcp auto-tuning on some system.
        The default value is 0.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.transfer.socket.recv.buffer.size</name>
      <value>0</value>
      <description>
        Socket receive buffer size for DataXceiver (receiving packets from client
        during block writing). This may affect TCP connection throughput.
        If it is set to zero or negative value, no buffer size will be set
        explicitly, thus enable tcp auto-tuning on some system.
        The default value is 0.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.upgrade.domain.factor</name>
      <value>${dfs.replication}</value>
      <description>
        This is valid only when block placement policy is set to
        BlockPlacementPolicyWithUpgradeDomain. It defines the number of
        unique upgrade domains any block's replicas should have.
        When the number of replicas is less or equal to this value, the policy
        ensures each replica has an unique upgrade domain. When the number of
        replicas is greater than this value, the policy ensures the number of
        unique domains is at least this value.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.zkfc.port</name>
      <value>8019</value>
      <description>
        RPC port for Zookeeper Failover Controller.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.bp-ready.timeout</name>
      <value>20s</value>
      <description>
        The maximum wait time for datanode to be ready before failing the
        received request. Setting this to 0 fails requests right away if the
        datanode is not yet registered with the namenode. This wait time
        reduces initial request failures after datanode restart.
        Support multiple time unit suffix(case insensitive), as described
        in dfs.heartbeat.interval.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.cached-dfsused.check.interval.ms</name>
      <value>600000</value>
      <description>
        The interval check time of loading DU_CACHE_FILE in each volume.
        When the cluster doing the rolling upgrade operations, it will
        usually lead dfsUsed cache file of each volume expired and redo the
        du operations in datanode and that makes datanode start slowly. Adjust
        this property can make cache file be available for the time as you want.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.rest-csrf.enabled</name>
      <value>false</value>
      <description>
        If true, then enables WebHDFS protection against cross-site request forgery
        (CSRF).  The WebHDFS client also uses this property to determine whether or
        not it needs to send the custom CSRF prevention header in its HTTP requests.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.rest-csrf.custom-header</name>
      <value>X-XSRF-HEADER</value>
      <description>
        The name of a custom header that HTTP requests must send when protection
        against cross-site request forgery (CSRF) is enabled for WebHDFS by setting
        dfs.webhdfs.rest-csrf.enabled to true.  The WebHDFS client also uses this
        property to determine whether or not it needs to send the custom CSRF
        prevention header in its HTTP requests.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.rest-csrf.methods-to-ignore</name>
      <value>GET,OPTIONS,HEAD,TRACE</value>
      <description>
        A comma-separated list of HTTP methods that do not require HTTP requests to
        include a custom header when protection against cross-site request forgery
        (CSRF) is enabled for WebHDFS by setting dfs.webhdfs.rest-csrf.enabled to
        true.  The WebHDFS client also uses this property to determine whether or
        not it needs to send the custom CSRF prevention header in its HTTP requests.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.rest-csrf.browser-useragents-regex</name>
      <value>^Mozilla.*,^Opera.*</value>
      <description>
        A comma-separated list of regular expressions used to match against an HTTP
        request's User-Agent header when protection against cross-site request
        forgery (CSRF) is enabled for WebHDFS by setting
        dfs.webhdfs.reset-csrf.enabled to true.  If the incoming User-Agent matches
        any of these regular expressions, then the request is considered to be sent
        by a browser, and therefore CSRF prevention is enforced.  If the request's
        User-Agent does not match any of these regular expressions, then the request
        is considered to be sent by something other than a browser, such as scripted
        automation.  In this case, CSRF is not a potential attack vector, so
        the prevention is not enforced.  This helps achieve backwards-compatibility
        with existing automation that has not been updated to send the CSRF
        prevention header.
      </description>
    </property>
    
      <property>
        <name>dfs.xframe.enabled</name>
        <value>true</value>
        <description>
          If true, then enables protection against clickjacking by returning
          X_FRAME_OPTIONS header value set to SAMEORIGIN.
          Clickjacking protection prevents an attacker from using transparent or
          opaque layers to trick a user into clicking on a button
          or link on another page.
        </description>
      </property>
    
      <property>
        <name>dfs.xframe.value</name>
        <value>SAMEORIGIN</value>
        <description>
          This configration value allows user to specify the value for the
          X-FRAME-OPTIONS. The possible values for this field are
          DENY, SAMEORIGIN and ALLOW-FROM. Any other value will throw an
          exception when namenode and datanodes are starting up.
        </description>
      </property>
    
    
    <property>
      <name>dfs.balancer.keytab.enabled</name>
      <value>false</value>
      <description>
        Set to true to enable login using a keytab for Kerberized Hadoop.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.address</name>
      <value>0.0.0.0:0</value>
      <description>
        The hostname used for a keytab based Kerberos login. Keytab based login
        can be enabled with dfs.balancer.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.keytab.file</name>
      <value></value>
      <description>
        The keytab file used by the Balancer to login as its
        service principal. The principal name is configured with
        dfs.balancer.kerberos.principal. Keytab based login can be
        enabled with dfs.balancer.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.kerberos.principal</name>
      <value></value>
      <description>
        The Balancer principal. This is typically set to
        balancer/_HOST@REALM.TLD. The Balancer will substitute _HOST with its
        own fully qualified hostname at startup. The _HOST placeholder
        allows using the same configuration setting on different servers.
        Keytab based login can be enabled with dfs.balancer.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.retry.policy.enabled</name>
      <value>false</value>
      <description>
        If "true", enable the retry policy of WebHDFS client.
        If "false", retry policy is turned off.
        Enabling the retry policy can be quite useful while using WebHDFS to
        copy large files between clusters that could timeout, or
        copy files between HA clusters that could failover during the copy.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.retry.policy.spec</name>
      <value>10000,6,60000,10</value>
      <description>
        Specify a policy of multiple linear random retry for WebHDFS client,
        e.g. given pairs of number of retries and sleep time (n0, t0), (n1, t1),
        ..., the first n0 retries sleep t0 milliseconds on average,
        the following n1 retries sleep t1 milliseconds on average, and so on.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.failover.max.attempts</name>
      <value>15</value>
      <description>
        Specify the max number of failover attempts for WebHDFS client
        in case of network exception.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.retry.max.attempts</name>
      <value>10</value>
      <description>
        Specify the max number of retry attempts for WebHDFS client,
        if the difference between retried attempts and failovered attempts is
        larger than the max number of retry attempts, there will be no more
        retries.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.failover.sleep.base.millis</name>
      <value>500</value>
      <description>
        Specify the base amount of time in milliseconds upon which the
        exponentially increased sleep time between retries or failovers
        is calculated for WebHDFS client.
      </description>
    </property>
    
    <property>
      <name>dfs.http.client.failover.sleep.max.millis</name>
      <value>15000</value>
      <description>
        Specify the upper bound of sleep time in milliseconds between
        retries or failovers for WebHDFS client.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.hosts.provider.classname</name>
      <value>org.apache.hadoop.hdfs.server.blockmanagement.HostFileManager</value>
      <description>
        The class that provides access for host files.
        org.apache.hadoop.hdfs.server.blockmanagement.HostFileManager is used
        by default which loads files specified by dfs.hosts and dfs.hosts.exclude.
        If org.apache.hadoop.hdfs.server.blockmanagement.CombinedHostFileManager is
        used, it will load the JSON file defined in dfs.hosts.
        To change class name, nn restart is required. "dfsadmin -refreshNodes" only
        refreshes the configuration files used by the class.
      </description>
    </property>
    
    <property>
      <name>datanode.https.port</name>
      <value>50475</value>
      <description>
        HTTPS port for DataNode.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.dispatcherThreads</name>
      <value>200</value>
      <description>
        Size of the thread pool for the HDFS balancer block mover.
        dispatchExecutor
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.movedWinWidth</name>
      <value>5400000</value>
      <description>
        Window of time in ms for the HDFS balancer tracking blocks and its
        locations.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.moverThreads</name>
      <value>1000</value>
      <description>
        Thread pool size for executing block moves.
        moverThreadAllocator
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.max-size-to-move</name>
      <value>10737418240</value>
      <description>
        Maximum number of bytes that can be moved by the balancer in a single
        thread.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.getBlocks.min-block-size</name>
      <value>10485760</value>
      <description>
        Minimum block threshold size in bytes to ignore when fetching a source's
        block list.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.getBlocks.size</name>
      <value>2147483648</value>
      <description>
        Total size in bytes of Datanode blocks to get when fetching a source's
        block list.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.block-move.timeout</name>
      <value>0</value>
      <description>
        Maximum amount of time in milliseconds for a block to move. If this is set
        greater than 0, Balancer will stop waiting for a block move completion
        after this time. In typical clusters, a 3 to 5 minute timeout is reasonable.
        If timeout happens to a large proportion of block moves, this needs to be
        increased. It could also be that too much work is dispatched and many nodes
        are constantly exceeding the bandwidth limit as a result. In that case,
        other balancer parameters might need to be adjusted.
        It is disabled (0) by default.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.max-no-move-interval</name>
      <value>60000</value>
      <description>
        If this specified amount of time has elapsed and no block has been moved
        out of a source DataNode, on more effort will be made to move blocks out of
        this DataNode in the current Balancer iteration.
      </description>
    </property>
    
    <property>
      <name>dfs.balancer.max-iteration-time</name>
      <value>1200000</value>
      <description>
        Maximum amount of time while an iteration can be run by the Balancer. After
        this time the Balancer will stop the iteration, and reevaluate the work
        needs to be done to Balance the cluster. The default value is 20 minutes.
      </description>
    </property>
    
    <property>
      <name>dfs.block.invalidate.limit</name>
      <value>1000</value>
      <description>
        The maximum number of invalidate blocks sent by namenode to a datanode
        per heartbeat deletion command. This property works with
        "dfs.namenode.invalidate.work.pct.per.iteration" to throttle block
        deletions.
      </description>
    </property>
    
    <property>
      <name>dfs.block.misreplication.processing.limit</name>
      <value>10000</value>
      <description>
        Maximum number of blocks to process for initializing replication queues.
      </description>
    </property>
    
    <property>
      <name>dfs.block.placement.ec.classname</name>
      <value>org.apache.hadoop.hdfs.server.blockmanagement.BlockPlacementPolicyRackFaultTolerant</value>
      <description>
        Placement policy class for striped files.
        Defaults to BlockPlacementPolicyRackFaultTolerant.class
      </description>
    </property>
    
    <property>
      <name>dfs.block.replicator.classname</name>
      <value>org.apache.hadoop.hdfs.server.blockmanagement.BlockPlacementPolicyDefault</value>
      <description>
        Class representing block placement policy for non-striped files.
        There are four block placement policies currently being supported:
        BlockPlacementPolicyDefault, BlockPlacementPolicyWithNodeGroup,
        BlockPlacementPolicyRackFaultTolerant and BlockPlacementPolicyWithUpgradeDomain.
        BlockPlacementPolicyDefault chooses the desired number of targets
        for placing block replicas in a default way. BlockPlacementPolicyWithNodeGroup
        places block replicas on environment with node-group layer. BlockPlacementPolicyRackFaultTolerant
        places the replicas to more racks.
        BlockPlacementPolicyWithUpgradeDomain places block replicas that honors upgrade domain policy.
        The details of placing replicas are documented in the javadoc of the corresponding policy classes.
        The default policy is BlockPlacementPolicyDefault, and the corresponding class is
        org.apache.hadoop.hdfs.server.blockmanagement.BlockPlacementPolicyDefault.
      </description>
    </property>
    
    <property>
      <name>dfs.blockreport.incremental.intervalMsec</name>
      <value>0</value>
      <description>
        If set to a positive integer, the value in ms to wait between sending
        incremental block reports from the Datanode to the Namenode.
      </description>
    </property>
    
    <property>
      <name>dfs.checksum.type</name>
      <value>CRC32C</value>
      <description>
        Checksum type
      </description>
    </property>
    
    <property>
      <name>dfs.checksum.combine.mode</name>
      <value>MD5MD5CRC</value>
      <description>
        Defines how lower-level chunk/block checksums are combined into file-level
        checksums; the original MD5MD5CRC mode is not comparable between files
        with different block layouts, while modes like COMPOSITE_CRC are
        comparable independently of block layout.
      </description>
    </property>
    
    <property>
      <name>dfs.client.block.write.locateFollowingBlock.retries</name>
      <value>5</value>
      <description>
        Number of retries to use when finding the next block during HDFS writes.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.proxy.provider</name>
      <value></value>
      <description>
        The prefix (plus a required nameservice ID) for the class name of the
        configured Failover proxy provider for the host.  For more detailed
        information, please consult the "Configuration Details" section of
        the HDFS High Availability documentation.
      </description>
    </property>
    
    <property>
      <name>dfs.client.failover.random.order</name>
      <value>false</value>
      <description>
        Determines if the failover proxies are picked in random order instead of the
        configured order. The prefix can be used with an optional nameservice ID
        (of form dfs.client.failover.random.order[.nameservice]) in case multiple
        nameservices exist and random order should be enabled for specific
        nameservices.
      </description>
    </property>
    
    <property>
      <name>dfs.client.key.provider.cache.expiry</name>
      <value>864000000</value>
      <description>
        DFS client security key cache expiration in milliseconds.
      </description>
    </property>
    
    <property>
      <name>dfs.client.max.block.acquire.failures</name>
      <value>3</value>
      <description>
        Maximum failures allowed when trying to get block information from a specific datanode.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.prefetch.size</name>
      <value></value>
      <description>
        The number of bytes for the DFSClient will fetch from the Namenode
        during a read operation.  Defaults to 10 * ${dfs.blocksize}.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.short.circuit.replica.stale.threshold.ms</name>
      <value>1800000</value>
      <description>
        Threshold in milliseconds for read entries during short-circuit local reads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.shortcircuit.buffer.size</name>
      <value>1048576</value>
      <description>
        Buffer size in bytes for short-circuit local reads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.read.striped.threadpool.size</name>
      <value>18</value>
      <description>
        The maximum number of threads used for parallel reading
        in striped layout.
      </description>
    </property>
    
    <property>
      <name>dfs.client.replica.accessor.builder.classes</name>
      <value></value>
      <description>
        Comma-separated classes for building ReplicaAccessor.  If the classes
        are specified, client will use external BlockReader that uses the
        ReplicaAccessor built by the builder.
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.interval-ms.get-last-block-length</name>
      <value>4000</value>
      <description>
        Retry interval in milliseconds to wait between retries in getting
        block lengths from the datanodes.
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.max.attempts</name>
      <value>10</value>
      <description>
        Max retry attempts for DFSClient talking to namenodes.
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.policy.enabled</name>
      <value>false</value>
      <description>
        If true, turns on DFSClient retry policy.
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.policy.spec</name>
      <value>10000,6,60000,10</value>
      <description>
        Set to pairs of timeouts and retries for DFSClient.
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.times.get-last-block-length</name>
      <value>3</value>
      <description>
        Number of retries for calls to fetchLocatedBlocksAndGetLastBlockLength().
      </description>
    </property>
    
    <property>
      <name>dfs.client.retry.window.base</name>
      <value>3000</value>
      <description>
        Base time window in ms for DFSClient retries.  For each retry attempt,
        this value is extended linearly (e.g. 3000 ms for first attempt and
        first retry, 6000 ms for second retry, 9000 ms for third retry, etc.).
      </description>
    </property>
    
    <property>
      <name>dfs.client.socket-timeout</name>
      <value>60000</value>
      <description>
        Default timeout value in milliseconds for all sockets.
      </description>
    </property>
    
    <property>
      <name>dfs.client.socketcache.capacity</name>
      <value>16</value>
      <description>
        Socket cache capacity (in entries) for short-circuit reads.
      </description>
    </property>
    
    <property>
      <name>dfs.client.socketcache.expiryMsec</name>
      <value>3000</value>
      <description>
        Socket cache expiration for short-circuit reads in msec.
      </description>
    </property>
    
    <property>
      <name>dfs.client.test.drop.namenode.response.number</name>
      <value>0</value>
      <description>
        The number of Namenode responses dropped by DFSClient for each RPC call.  Used
        for testing the NN retry cache.
      </description>
    </property>
    
    <property>
      <name>dfs.client.hedged.read.threadpool.size</name>
      <value>0</value>
      <description>
        Support 'hedged' reads in DFSClient. To enable this feature, set the parameter
        to a positive number. The threadpool size is how many threads to dedicate
        to the running of these 'hedged', concurrent reads in your client.
      </description>
    </property>
    
    <property>
      <name>dfs.client.hedged.read.threshold.millis</name>
      <value>500</value>
      <description>
        Configure 'hedged' reads in DFSClient. This is the number of milliseconds
        to wait before starting up a 'hedged' read.
      </description>
    </property>
    
    <property>
      <name>dfs.client.write.byte-array-manager.count-limit</name>
      <value>2048</value>
      <description>
        The maximum number of arrays allowed for each array length.
      </description>
    </property>
    
    <property>
      <name>dfs.client.write.byte-array-manager.count-reset-time-period-ms</name>
      <value>10000</value>
      <description>
        The time period in milliseconds that the allocation count for each array length is
        reset to zero if there is no increment.
      </description>
    </property>
    
    <property>
      <name>dfs.client.write.byte-array-manager.count-threshold</name>
      <value>128</value>
      <description>
        The count threshold for each array length so that a manager is created only after the
        allocation count exceeds the threshold. In other words, the particular array length
        is not managed until the allocation count exceeds the threshold.
      </description>
    </property>
    
    <property>
      <name>dfs.client.write.byte-array-manager.enabled</name>
      <value>false</value>
      <description>
        If true, enables byte array manager used by DFSOutputStream.
      </description>
    </property>
    
    <property>
      <name>dfs.client.write.max-packets-in-flight</name>
      <value>80</value>
      <description>
        The maximum number of DFSPackets allowed in flight.
      </description>
    </property>
    
    <property>
      <name>dfs.content-summary.limit</name>
      <value>5000</value>
      <description>
        The maximum content summary counts allowed in one locking period. 0 or a negative number
        means no limit (i.e. no yielding).
      </description>
    </property>
    
    <property>
      <name>dfs.content-summary.sleep-microsec</name>
      <value>500</value>
      <description>
        The length of time in microseconds to put the thread to sleep, between reaquiring the locks
        in content summary computation.
      </description>
    </property>
    
    <property>
      <name>dfs.data.transfer.client.tcpnodelay</name>
      <value>true</value>
      <description>
        If true, set TCP_NODELAY to sockets for transferring data from DFS client.
      </description>
    </property>
    
    <property>
      <name>dfs.data.transfer.server.tcpnodelay</name>
      <value>true</value>
      <description>
        If true, set TCP_NODELAY to sockets for transferring data between Datanodes.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.balance.max.concurrent.moves</name>
      <value>50</value>
      <description>
        Maximum number of threads for Datanode balancer pending moves.  This
        value is reconfigurable via the "dfsadmin -reconfig" command.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.fsdataset.factory</name>
      <value></value>
      <description>
        The class name for the underlying storage that stores replicas for a
        Datanode.  Defaults to
        org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.FsDatasetFactory.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.fsdataset.volume.choosing.policy</name>
      <value></value>
      <description>
        The class name of the policy for choosing volumes in the list of
        directories.  Defaults to
        org.apache.hadoop.hdfs.server.datanode.fsdataset.RoundRobinVolumeChoosingPolicy.
        If you would like to take into account available disk space, set the
        value to
        "org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy".
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.hostname</name>
      <value></value>
      <description>
        Optional.  The hostname for the Datanode containing this
        configuration file.  Will be different for each machine.
        Defaults to current hostname.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.lazywriter.interval.sec</name>
      <value>60</value>
      <description>
        Interval in seconds for Datanodes for lazy persist writes.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.network.counts.cache.max.size</name>
      <value>2147483647</value>
      <description>
        The maximum number of entries the datanode per-host network error
        count cache may contain.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.oob.timeout-ms</name>
      <value>1500,0,0,0</value>
      <description>
        Timeout value when sending OOB response for each OOB type, which are
        OOB_RESTART, OOB_RESERVED1, OOB_RESERVED2, and OOB_RESERVED3,
        respectively.  Currently, only OOB_RESTART is used.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.parallel.volumes.load.threads.num</name>
      <value></value>
      <description>
        Maximum number of threads to use for upgrading data directories.
        The default value is the number of storage directories in the
        DataNode.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.ram.disk.replica.tracker</name>
      <value></value>
      <description>
        Name of the class implementing the RamDiskReplicaTracker interface.
        Defaults to
        org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.RamDiskReplicaLruTracker.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.restart.replica.expiration</name>
      <value>50</value>
      <description>
        During shutdown for restart, the amount of time in seconds budgeted for
        datanode restart.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.socket.reuse.keepalive</name>
      <value>4000</value>
      <description>
        The window of time in ms before the DataXceiver closes a socket for a
        single request.  If a second request occurs within that window, the
        socket can be reused.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.socket.write.timeout</name>
      <value>480000</value>
      <description>
        Timeout in ms for clients socket writes to DataNodes.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.sync.behind.writes.in.background</name>
      <value>false</value>
      <description>
        If set to true, then sync_file_range() system call will occur
        asynchronously.  This property is only valid when the property
        dfs.datanode.sync.behind.writes is true.
      </description>
    </property>
    
    <property>
      <name>dfs.datanode.transferTo.allowed</name>
      <value>true</value>
      <description>
        If false, break block transfers on 32-bit machines greater than
        or equal to 2GB into smaller chunks.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.fencing.methods</name>
      <value></value>
      <description>
        A list of scripts or Java classes which will be used to fence
        the Active NameNode during a failover.  See the HDFS High
        Availability documentation for details on automatic HA
        configuration.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.standby.checkpoints</name>
      <value>true</value>
      <description>
        If true, a NameNode in Standby state periodically takes a checkpoint
        of the namespace, saves it to its local storage and then upload to
        the remote NameNode.
      </description>
    </property>
    
    <property>
      <name>dfs.ha.zkfc.port</name>
      <value>8019</value>
      <description>
        The port number that the zookeeper failover controller RPC
        server binds to.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.edits.dir</name>
      <value>/tmp/hadoop/dfs/journalnode/</value>
      <description>
        The directory where the journal edit files are stored.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.enable.sync</name>
      <value>true</value>
      <description>
        If true, the journal nodes wil sync with each other. The journal nodes
        will periodically gossip with other journal nodes to compare edit log
        manifests and if they detect any missing log segment, they will download
        it from the other journal nodes.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.sync.interval</name>
      <value>120000</value>
      <description>
        Time interval, in milliseconds, between two Journal Node syncs.
        This configuration takes effect only if the journalnode sync is enabled
        by setting the configuration parameter dfs.journalnode.enable.sync to true.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.kerberos.internal.spnego.principal</name>
      <value></value>
      <description>
        Kerberos SPNEGO principal name used by the journal node.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.kerberos.principal</name>
      <value></value>
      <description>
        Kerberos principal name for the journal node.
      </description>
    </property>
    
    <property>
      <name>dfs.journalnode.keytab.file</name>
      <value></value>
      <description>
        Kerberos keytab file for the journal node.
      </description>
    </property>
    
    <property>
      <name>dfs.ls.limit</name>
      <value>1000</value>
      <description>
        Limit the number of files printed by ls. If less or equal to
        zero, at most DFS_LIST_LIMIT_DEFAULT (= 1000) will be printed.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.movedWinWidth</name>
      <value>5400000</value>
      <description>
        The minimum time interval, in milliseconds, that a block can be
        moved to another location again.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.moverThreads</name>
      <value>1000</value>
      <description>
        Configure the balancer's mover thread pool size.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.retry.max.attempts</name>
      <value>10</value>
      <description>
        The maximum number of retries before the mover consider the
        move failed.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.keytab.enabled</name>
      <value>false</value>
      <description>
        Set to true to enable login using a keytab for Kerberized Hadoop.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.address</name>
      <value>0.0.0.0:0</value>
      <description>
        The hostname used for a keytab based Kerberos login. Keytab based login
        can be enabled with dfs.mover.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.keytab.file</name>
      <value></value>
      <description>
        The keytab file used by the Mover to login as its
        service principal. The principal name is configured with
        dfs.mover.kerberos.principal. Keytab based login can be
        enabled with dfs.mover.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.kerberos.principal</name>
      <value></value>
      <description>
        The Mover principal. This is typically set to
        mover/_HOST@REALM.TLD. The Mover will substitute _HOST with its
        own fully qualified hostname at startup. The _HOST placeholder
        allows using the same configuration setting on different servers.
        Keytab based login can be enabled with dfs.mover.keytab.enabled.
      </description>
    </property>
    
    <property>
      <name>dfs.mover.max-no-move-interval</name>
      <value>60000</value>
      <description>
        If this specified amount of time has elapsed and no block has been moved
        out of a source DataNode, on more effort will be made to move blocks out of
        this DataNode in the current Mover iteration.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.audit.log.async</name>
      <value>false</value>
      <description>
        If true, enables asynchronous audit log.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.audit.log.token.tracking.id</name>
      <value>false</value>
      <description>
        If true, adds a tracking ID for all audit log events.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.available-space-block-placement-policy.balanced-space-preference-fraction</name>
      <value>0.6</value>
      <description>
        Only used when the dfs.block.replicator.classname is set to
        org.apache.hadoop.hdfs.server.blockmanagement.AvailableSpaceBlockPlacementPolicy.
        Special value between 0 and 1, noninclusive.  Increases chance of
        placing blocks on Datanodes with less disk space used.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.backup.dnrpc-address</name>
      <value></value>
      <description>
        Service RPC address for the backup Namenode.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.delegation.token.always-use</name>
      <value>false</value>
      <description>
        For testing.  Setting to true always allows the DT secret manager
        to be used, even if security is disabled.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.asynclogging</name>
      <value>true</value>
      <description>
        If set to true, enables asynchronous edit logs in the Namenode.  If set
        to false, the Namenode uses the traditional synchronous edit logs.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.dir.minimum</name>
      <value>1</value>
      <description>
        dfs.namenode.edits.dir includes both required directories
        (specified by dfs.namenode.edits.dir.required) and optional directories.
    
        The number of usable optional directories must be greater than or equal
        to this property.  If the number of usable optional directories falls
        below dfs.namenode.edits.dir.minimum, HDFS will issue an error.
    
        This property defaults to 1.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.edits.journal-plugin</name>
      <value></value>
      <description>
        When FSEditLog is creating JournalManagers from dfs.namenode.edits.dir,
        and it encounters a URI with a schema different to "file" it loads the
        name of the implementing class from
        "dfs.namenode.edits.journal-plugin.[schema]". This class must implement
        JournalManager and have a constructor which takes (Configuration, URI).
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.file.close.num-committed-allowed</name>
      <value>0</value>
      <description>
        Normally a file can only be closed with all its blocks are committed.
        When this value is set to a positive integer N, a file can be closed
        when N blocks are committed and the rest complete.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.inode.attributes.provider.class</name>
      <value></value>
      <description>
        Name of class to use for delegating HDFS authorization.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.inode.attributes.provider.bypass.users</name>
      <value></value>
      <description>
        A list of user principals (in secure cluster) or user names (in insecure
        cluster) for whom the external attributes provider will be bypassed for all
        operations. This means file attributes stored in HDFS instead of the
        external provider will be used for permission checking and be returned when
        requested.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.max-num-blocks-to-log</name>
      <value>1000</value>
      <description>
        Puts a limit on the number of blocks printed to the log by the Namenode
        after a block report.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.max.op.size</name>
      <value>52428800</value>
      <description>
        Maximum opcode size in bytes.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.missing.checkpoint.periods.before.shutdown</name>
      <value>3</value>
      <description>
        The number of checkpoint period windows (as defined by the property
        dfs.namenode.checkpoint.period) allowed by the Namenode to perform
        saving the namespace before shutdown.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.name.cache.threshold</name>
      <value>10</value>
      <description>
        Frequently accessed files that are accessed more times than this
        threshold are cached in the FSDirectory nameCache.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.replication.max-streams</name>
      <value>2</value>
      <description>
        Hard limit for the number of highest-priority replication streams.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.replication.max-streams-hard-limit</name>
      <value>4</value>
      <description>
        Hard limit for all replication streams.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.reconstruction.pending.timeout-sec</name>
      <value>300</value>
      <description>
        Timeout in seconds for block reconstruction.  If this value is 0 or less,
        then it will default to 5 minutes.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.stale.datanode.minimum.interval</name>
      <value>3</value>
      <description>
        Minimum number of missed heartbeats intervals for a datanode to
        be marked stale by the Namenode.  The actual interval is calculated as
        (dfs.namenode.stale.datanode.minimum.interval * dfs.heartbeat.interval)
        in seconds.  If this value is greater than the property
        dfs.namenode.stale.datanode.interval, then the calculated value above
        is used.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.storageinfo.defragment.timeout.ms</name>
      <value>4</value>
      <description>
        Timeout value in ms for the StorageInfo compaction run.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.storageinfo.defragment.interval.ms</name>
      <value>600000</value>
      <description>
        The thread for checking the StorageInfo for defragmentation will
        run periodically.  The time between runs is determined by this
        property.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.storageinfo.defragment.ratio</name>
      <value>0.75</value>
      <description>
        The defragmentation threshold for the StorageInfo.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.snapshot.capture.openfiles</name>
      <value>false</value>
      <description>
        If true, snapshots taken will have an immutable shared copy of
        the open files that have valid leases. Even after the open files
        grow or shrink in size, snapshot will always have the previous
        point-in-time version of the open files, just like all other
        closed files. Default is false.
        Note: The file length captured for open files in snapshot is
        whats recorded in NameNode at the time of snapshot and it may
        be shorter than what the client has written till then. In order
        to capture the latest length, the client can call hflush/hsync
        with the flag SyncFlag.UPDATE_LENGTH on the open files handles.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.snapshot.skip.capture.accesstime-only-change</name>
      <value>false</value>
      <description>
        If accessTime of a file/directory changed but there is no other
        modification made to the file/directory, the changed accesstime will
        not be captured in next snapshot. However, if there is other modification
        made to the file/directory, the latest access time will be captured
        together with the modification in next snapshot.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.snapshotdiff.allow.snap-root-descendant</name>
      <value>true</value>
      <description>
        If enabled, snapshotDiff command can be run for any descendant directory
        under a snapshot root directory and the diff calculation will be scoped
        to the given descendant directory. Otherwise, snapshot diff command can
        only be run for a snapshot root directory.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.snapshotdiff.listing.limit</name>
      <value>1000</value>
      <description>
        Limit the number of entries generated by getSnapshotDiffReportListing within
        one rpc call to the namenode.If less or equal to zero, at most
        DFS_NAMENODE_SNAPSHOT_DIFF_LISTING_LIMIT_DEFAULT (= 1000) will be sent
        across to the client within one rpc call.
      </description>
    </property>
    <property>
      <name>dfs.namenode.snapshot.max.limit</name>
      <value>65536</value>
      <description>
        Limits the maximum number of snapshots allowed per snapshottable
        directory.If the configuration is not set, the default limit
        for maximum no of snapshots allowed is 65536.
      </description>
    </property>
    
    <property>
      <name>dfs.namenode.snapshot.skiplist.max.levels</name>
      <value>0</value>
      <description>
        Maximum no of the skip levels to be maintained in the skip list for
        storing directory snapshot diffs. By default, it is set to 0 and a linear
        list will be used to store the directory snapshot diffs.
      </description>
    </property>
    <property>
      <name>dfs.namenode.snapshot.skiplist.interval</name>
      <value>10</value>
      <description>
        The interval after which the skip levels will be formed in the skip list
        for storing directory snapshot diffs. By default, value is set to 10.
      </description>
    </property>
    
    <property>
      <name>dfs.pipeline.ecn</name>
      <value>false</value>
      <description>
        If true, allows ECN (explicit congestion notification) from the
        Datanode.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.accept-recovery.timeout.ms</name>
      <value>120000</value>
      <description>
        Quorum timeout in milliseconds during accept phase of
        recovery/synchronization for a specific segment.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.finalize-segment.timeout.ms</name>
      <value>120000</value>
      <description>
        Quorum timeout in milliseconds during finalizing for a specific
        segment.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.get-journal-state.timeout.ms</name>
      <value>120000</value>
      <description>
        Timeout in milliseconds when calling getJournalState().
        JournalNodes.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.new-epoch.timeout.ms</name>
      <value>120000</value>
      <description>
        Timeout in milliseconds when getting an epoch number for write
        access to JournalNodes.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.prepare-recovery.timeout.ms</name>
      <value>120000</value>
      <description>
        Quorum timeout in milliseconds during preparation phase of
        recovery/synchronization for a specific segment.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.queued-edits.limit.mb</name>
      <value>10</value>
      <description>
        Queue size in MB for quorum journal edits.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.select-input-streams.timeout.ms</name>
      <value>20000</value>
      <description>
        Timeout in milliseconds for accepting streams from JournalManagers.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.start-segment.timeout.ms</name>
      <value>20000</value>
      <description>
        Quorum timeout in milliseconds for starting a log segment.
      </description>
    </property>
    
    <property>
      <name>dfs.qjournal.write-txns.timeout.ms</name>
      <value>20000</value>
      <description>
        Write timeout in milliseconds when writing to a quorum of remote
        journals.
      </description>
    </property>
    
    <property>
      <name>dfs.quota.by.storage.type.enabled</name>
      <value>true</value>
      <description>
        If true, enables quotas based on storage type.
      </description>
    </property>
    
    <property>
      <name>dfs.secondary.namenode.kerberos.principal</name>
      <value></value>
      <description>
        Kerberos principal name for the Secondary NameNode.
      </description>
    </property>
    
    <property>
      <name>dfs.secondary.namenode.keytab.file</name>
      <value></value>
      <description>
        Kerberos keytab file for the Secondary NameNode.
      </description>
    </property>
    
    <property>
      <name>dfs.web.authentication.filter</name>
      <value>org.apache.hadoop.hdfs.web.AuthFilter</value>
      <description>
        Authentication filter class used for WebHDFS.
      </description>
    </property>
    
    <property>
      <name>dfs.web.authentication.simple.anonymous.allowed</name>
      <value></value>
      <description>
        If true, allow anonymous user to access WebHDFS. Set to
        false to disable anonymous authentication.
      </description>
    </property>
    
    <property>
      <name>dfs.web.ugi</name>
      <value></value>
      <description>
        dfs.web.ugi is deprecated. Use hadoop.http.staticuser.user instead.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.netty.high.watermark</name>
      <value>65535</value>
      <description>
        High watermark configuration to Netty for Datanode WebHdfs.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.netty.low.watermark</name>
      <value>32768</value>
      <description>
        Low watermark configuration to Netty for Datanode WebHdfs.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.oauth2.access.token.provider</name>
      <value></value>
      <description>
        Access token provider class for WebHDFS using OAuth2.
        Defaults to org.apache.hadoop.hdfs.web.oauth2.ConfCredentialBasedAccessTokenProvider.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.oauth2.client.id</name>
      <value></value>
      <description>
        Client id used to obtain access token with either credential or
        refresh token.
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.oauth2.enabled</name>
      <value>false</value>
      <description>
        If true, enables OAuth2 in WebHDFS
      </description>
    </property>
    
    <property>
      <name>dfs.webhdfs.oauth2.refresh.url</name>
      <value></value>
      <description>
        URL against which to post for obtaining bearer token with
        either credential or refresh token.
      </description>
    </property>
    
    <property>
      <name>ssl.server.keystore.keypassword</name>
      <value></value>
      <description>
        Keystore key password for HTTPS SSL configuration
      </description>
    </property>
    
    <property>
      <name>ssl.server.keystore.location</name>
      <value></value>
      <description>
        Keystore location for HTTPS SSL configuration
      </description>
    </property>
    
    <property>
      <name>ssl.server.keystore.password</name>
      <value></value>
      <description>
        Keystore password for HTTPS SSL configuration
      </description>
    </property>
    
    <property>
      <name>ssl.server.truststore.location</name>
      <value></value>
      <description>
        Truststore location for HTTPS SSL configuration
      </description>
    </property>
    
    <property>
      <name>ssl.server.truststore.password</name>
      <value></value>
      <description>
        Truststore password for HTTPS SSL configuration
      </description>
    </property>
    
    
      <property>
        <name>dfs.disk.balancer.max.disk.throughputInMBperSec</name>
        <value>10</value>
        <description>Maximum disk bandwidth used by diskbalancer
          during read from a source disk. The unit is MB/sec.
        </description>
      </property>
    
      <property>
        <name>dfs.disk.balancer.block.tolerance.percent</name>
        <value>10</value>
        <description>
          When a disk balancer copy operation is proceeding, the datanode is still
          active. So it might not be possible to move the exactly specified
          amount of data. So tolerance allows us to define a percentage which
          defines a good enough move.
        </description>
      </property>
    
      <property>
        <name>dfs.disk.balancer.max.disk.errors</name>
        <value>5</value>
        <description>
          During a block move from a source to destination disk, we might
          encounter various errors. This defines how many errors we can tolerate
          before we declare a move between 2 disks (or a step) has failed.
        </description>
      </property>
    
      <property>
        <name>dfs.disk.balancer.plan.valid.interval</name>
        <value>1d</value>
        <description>
          Maximum amount of time disk balancer plan is valid. This setting
          supports multiple time unit suffixes as described in
          dfs.heartbeat.interval. If no suffix is specified then milliseconds
          is assumed.
        </description>
      </property>
    
    
      <property>
        <name>dfs.disk.balancer.enabled</name>
        <value>true</value>
        <description>
            This enables the diskbalancer feature on a cluster. By default, disk
          balancer is enabled.
        </description>
      </property>
    
      <property>
        <name>dfs.disk.balancer.plan.threshold.percent</name>
        <value>10</value>
        <description>
          The percentage threshold value for volume Data Density in a plan.
          If the absolute value of volume Data Density which is out of
          threshold value in a node, it means that the volumes corresponding to
          the disks should do the balancing in the plan. The default value is 10.
        </description>
      </property>
    
      <property>
        <name>dfs.namenode.provided.enabled</name>
        <value>false</value>
        <description>
          Enables the Namenode to handle provided storages.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.storage.id</name>
        <value>DS-PROVIDED</value>
        <description>
          The storage ID used for provided stores.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.class</name>
        <value>org.apache.hadoop.hdfs.server.common.blockaliasmap.impl.TextFileRegionAliasMap</value>
        <description>
          The class that is used to specify the input format of the blocks on
          provided storages. The default is
          org.apache.hadoop.hdfs.server.common.blockaliasmap.impl.TextFileRegionAliasMap which uses
          file regions to describe blocks. The file regions are specified as a
          delimited text file. Each file region is a 6-tuple containing the
          block id, remote file path, offset into file, length of block, the
          block pool id containing the block, and the generation stamp of the
          block.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.inmemory.batch-size</name>
        <value>500</value>
        <description>
          The batch size when iterating over the database backing the aliasmap
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.inmemory.dnrpc-address</name>
        <value>0.0.0.0:50200</value>
        <description>
          The address where the aliasmap server will be running
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.inmemory.leveldb.dir</name>
        <value>/tmp</value>
        <description>
          The directory where the leveldb files will be kept
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.inmemory.enabled</name>
        <value>false</value>
        <description>
          Don't use the aliasmap by default. Some tests will fail
          because they try to start the namenode twice with the
          same parameters if you turn it on.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.text.delimiter</name>
        <value>,</value>
        <description>
            The delimiter used when the provided block map is specified as
            a text file.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.text.read.file</name>
        <value></value>
        <description>
            The path specifying the provided block map as a text file, specified as
            a URI.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.text.codec</name>
        <value></value>
        <description>
            The codec used to de-compress the provided block map.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.text.write.dir</name>
        <value></value>
        <description>
            The path to which the provided block map should be written as a text
            file, specified as a URI.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.leveldb.path</name>
        <value></value>
        <description>
          The read/write path for the leveldb-based alias map
          (org.apache.hadoop.hdfs.server.common.blockaliasmap.impl.LevelDBFileRegionAliasMap).
          The path has to be explicitly configured when this alias map is used.
        </description>
      </property>
    
      <property>
        <name>dfs.provided.aliasmap.load.retries</name>
        <value>0</value>
        <description>
          The number of retries on the Datanode to load the provided aliasmap;
          defaults to 0.
        </description>
      </property>
    
      <property>
        <name>dfs.lock.suppress.warning.interval</name>
        <value>10s</value>
        <description>Instrumentation reporting long critical sections will suppress
          consecutive warnings within this interval.</description>
      </property>
    
      <property>
        <name>httpfs.buffer.size</name>
        <value>4096</value>
        <description>
          The size buffer to be used when creating or opening httpfs filesystem IO stream.
        </description>
      </property>
    
      <property>
        <name>dfs.webhdfs.use.ipc.callq</name>
        <value>true</value>
        <description>Enables routing of webhdfs calls through rpc
          call queue</description>
      </property>
    
      <property>
        <name>dfs.datanode.disk.check.min.gap</name>
        <value>15m</value>
        <description>
          The minimum gap between two successive checks of the same DataNode
          volume. This setting supports multiple time unit suffixes as described
          in dfs.heartbeat.interval. If no suffix is specified then milliseconds
          is assumed.
        </description>
      </property>
    
      <property>
        <name>dfs.datanode.disk.check.timeout</name>
        <value>10m</value>
        <description>
          Maximum allowed time for a disk check to complete during DataNode
          startup. If the check does not complete within this time interval
          then the disk is declared as failed. This setting supports
          multiple time unit suffixes as described in dfs.heartbeat.interval.
          If no suffix is specified then milliseconds is assumed.
        </description>
      </property>
    
      <property>
        <name>dfs.use.dfs.network.topology</name>
        <value>true</value>
        <description>
          Enables DFSNetworkTopology to choose nodes for placing replicas.
          When enabled, NetworkTopology will be instantiated as class defined in
          property dfs.net.topology.impl, otherwise NetworkTopology will be
          instantiated as class defined in property net.topology.impl.
        </description>
      </property>
    
      <property>
        <name>dfs.net.topology.impl</name>
        <value>org.apache.hadoop.hdfs.net.DFSNetworkTopology</value>
        <description>
          The implementation class of NetworkTopology used in HDFS. By default,
          the class org.apache.hadoop.hdfs.net.DFSNetworkTopology is specified and
          used in block placement.
          This property only works when dfs.use.dfs.network.topology is true.
        </description>
      </property>
    
      <property>
        <name>dfs.qjm.operations.timeout</name>
        <value>60s</value>
        <description>
          Common key to set timeout for related operations in
          QuorumJournalManager. This setting supports multiple time unit suffixes
          as described in dfs.heartbeat.interval.
          If no suffix is specified then milliseconds is assumed.
        </description>
      </property>
    
      <property>
        <name>dfs.reformat.disabled</name>
        <value>false</value>
        <description>
          Disable reformat of NameNode. If it's value is set to "true"
          and metadata directories already exist then attempt to format NameNode
          will throw NameNodeFormatException.
        </description>
      </property>
    </configuration>

3.mapred-default.xml

4.yarn-default.xml

<?xml version="1.0"?>
    <?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
    
    
    
    
    
    
    
    <configuration>
    
      
    
      <property>
        <description>Factory to create client IPC classes.</description>
        <name>yarn.ipc.client.factory.class</name>
      </property>
    
      <property>
        <description>Factory to create server IPC classes.</description>
        <name>yarn.ipc.server.factory.class</name>
      </property>
    
      <property>
        <description>Factory to create serializeable records.</description>
        <name>yarn.ipc.record.factory.class</name>
      </property>
    
      <property>
        <description>RPC class implementation</description>
        <name>yarn.ipc.rpc.class</name>
        <value>org.apache.hadoop.yarn.ipc.HadoopYarnProtoRPC</value>
      </property>
      
      
    
      <property>
        <description>The hostname of the RM.</description>
        <name>yarn.resourcemanager.hostname</name>
        <value>0.0.0.0</value>
      </property>    
      
      <property>
        <description>The address of the applications manager interface in the RM.</description>
        <name>yarn.resourcemanager.address</name>
        <value>${yarn.resourcemanager.hostname}:8032</value>
      </property>
    
      <property>
        <description>
          The actual address the server will bind to. If this optional address is
          set, the RPC and webapp servers will bind to this address and the port specified in
          yarn.resourcemanager.address and yarn.resourcemanager.webapp.address, respectively. This
          is most useful for making RM listen to all interfaces by setting to 0.0.0.0.
        </description>
        <name>yarn.resourcemanager.bind-host</name>
        <value></value>
      </property>
    
      <property>
        <description>
          If set to true, then ALL container updates will be automatically sent to
          the NM in the next heartbeat</description>
        <name>yarn.resourcemanager.auto-update.containers</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The number of threads used to handle applications manager requests.</description>
        <name>yarn.resourcemanager.client.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>Number of threads used to launch/cleanup AM.</description>
        <name>yarn.resourcemanager.amlauncher.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>Retry times to connect with NM.</description>
        <name>yarn.resourcemanager.nodemanager-connect-retries</name>
        <value>10</value>
      </property>
    
      <property>
        <description>Timeout in milliseconds when YARN dispatcher tries to drain the
          events. Typically, this happens when service is stopping. e.g. RM drains
          the ATS events dispatcher when stopping.
        </description>
        <name>yarn.dispatcher.drain-events.timeout</name>
        <value>300000</value>
      </property>
    
      <property>
        <description>The expiry interval for application master reporting.</description>
        <name>yarn.am.liveness-monitor.expiry-interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>The Kerberos principal for the resource manager.</description>
        <name>yarn.resourcemanager.principal</name>
      </property>
    
      <property>
        <description>The address of the scheduler interface.</description>
        <name>yarn.resourcemanager.scheduler.address</name>
        <value>${yarn.resourcemanager.hostname}:8030</value>
      </property>
    
      <property>
        <description>Number of threads to handle scheduler interface.</description>
        <name>yarn.resourcemanager.scheduler.client.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>
          Specify which handler will be used to process PlacementConstraints.
          Acceptable values are: `placement-processor`, `scheduler` and `disabled`.
          For a detailed explanation of these values, please refer to documentation.
        </description>
        <name>yarn.resourcemanager.placement-constraints.handler</name>
        <value>disabled</value>
      </property>
    
      <property>
        <description>Number of times to retry placing of rejected SchedulingRequests</description>
        <name>yarn.resourcemanager.placement-constraints.retry-attempts</name>
        <value>3</value>
      </property>
    
      <property>
        <description>Constraint Placement Algorithm to be used.</description>
        <name>yarn.resourcemanager.placement-constraints.algorithm.class</name>
        <value>org.apache.hadoop.yarn.server.resourcemanager.scheduler.constraint.algorithm.DefaultPlacementAlgorithm</value>
      </property>
    
      <property>
        <description>Placement Algorithm Requests Iterator to be used.</description>
        <name>yarn.resourcemanager.placement-constraints.algorithm.iterator</name>
        <value>SERIAL</value>
      </property>
    
      <property>
        <description>Threadpool size for the Algorithm used for placement constraint processing.</description>
        <name>yarn.resourcemanager.placement-constraints.algorithm.pool-size</name>
        <value>1</value>
      </property>
    
      <property>
        <description>Threadpool size for the Scheduler invocation phase of placement constraint processing.</description>
        <name>yarn.resourcemanager.placement-constraints.scheduler.pool-size</name>
        <value>1</value>
      </property>
    
      <property>
        <description>
          Comma separated class names of ApplicationMasterServiceProcessor
          implementations. The processors will be applied in the order
          they are specified.
        </description>
        <name>yarn.resourcemanager.application-master-service.processors</name>
        <value></value>
      </property>
    
      <property>
          <description>
            This configures the HTTP endpoint for YARN Daemons.The following
            values are supported:
            - HTTP_ONLY : Service is provided only on http
            - HTTPS_ONLY : Service is provided only on https
          </description>
          <name>yarn.http.policy</name>
          <value>HTTP_ONLY</value>
      </property>
    
      <property>
        <description>
          The http address of the RM web application.
          If only a host is provided as the value,
          the webapp will be served on a random port.
        </description>
        <name>yarn.resourcemanager.webapp.address</name>
        <value>${yarn.resourcemanager.hostname}:8088</value>
      </property>
    
      <property>
        <description>
          The https address of the RM web application.
          If only a host is provided as the value,
          the webapp will be served on a random port.
        </description>
        <name>yarn.resourcemanager.webapp.https.address</name>
        <value>${yarn.resourcemanager.hostname}:8090</value>
      </property>
    
      <property>
        <description>
        The Kerberos keytab file to be used for spnego filter for the RM web
        interface.
        </description>
        <name>yarn.resourcemanager.webapp.spnego-keytab-file</name>
        <value></value>
      </property>
    
      <property>
        <description>
        The Kerberos principal to be used for spnego filter for the RM web
        interface.
        </description>
        <name>yarn.resourcemanager.webapp.spnego-principal</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Add button to kill application in the RM Application view.
        </description>
        <name>yarn.resourcemanager.webapp.ui-actions.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>To enable RM web ui2 application.</description>
        <name>yarn.webapp.ui2.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          Explicitly provide WAR file path for ui2 if needed.
        </description>
        <name>yarn.webapp.ui2.war-file-path</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Enable services rest api on ResourceManager.
        </description>
        <name>yarn.webapp.api-service.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <name>yarn.resourcemanager.resource-tracker.address</name>
        <value>${yarn.resourcemanager.hostname}:8031</value>
      </property>
    
      <property>
        <description>Are acls enabled.</description>
        <name>yarn.acl.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Are reservation acls enabled.</description>
        <name>yarn.acl.reservation-enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>ACL of who can be admin of the YARN cluster.</description>
        <name>yarn.admin.acl</name>
        <value>*</value>
      </property>
    
      <property>
        <description>The address of the RM admin interface.</description>
        <name>yarn.resourcemanager.admin.address</name>
        <value>${yarn.resourcemanager.hostname}:8033</value>
      </property>
    
      <property>
        <description>Number of threads used to handle RM admin interface.</description>
        <name>yarn.resourcemanager.admin.client.thread-count</name>
        <value>1</value>
      </property>
    
      <property>
        <description>Maximum time to wait to establish connection to
        ResourceManager.</description>
        <name>yarn.resourcemanager.connect.max-wait.ms</name>
        <value>900000</value>
      </property>
    
      <property>
        <description>How often to try connecting to the
        ResourceManager.</description>
        <name>yarn.resourcemanager.connect.retry-interval.ms</name>
        <value>30000</value>
      </property>
    
      <property>
        <description>The maximum number of application attempts. It's a global
        setting for all application masters. Each application master can specify
        its individual maximum number of application attempts via the API, but the
        individual number cannot be more than the global upper bound. If it is,
        the resourcemanager will override it. The default number is set to 2, to
        allow at least one retry for AM.</description>
        <name>yarn.resourcemanager.am.max-attempts</name>
        <value>2</value>
      </property>
    
      <property>
        <description>How often to check that containers are still alive. </description>
        <name>yarn.resourcemanager.container.liveness-monitor.interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>The keytab for the resource manager.</description>
        <name>yarn.resourcemanager.keytab</name>
        <value>/etc/krb5.keytab</value>
      </property>
    
      <property>
        <description>Flag to enable override of the default kerberos authentication
        filter with the RM authentication filter to allow authentication using
        delegation tokens(fallback to kerberos if the tokens are missing). Only
        applicable when the http authentication type is kerberos.</description>
        <name>yarn.resourcemanager.webapp.delegation-token-auth-filter.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Flag to enable cross-origin (CORS) support in the RM. This flag
        requires the CORS filter initializer to be added to the filter initializers
        list in core-site.xml.</description>
        <name>yarn.resourcemanager.webapp.cross-origin.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>How long to wait until a node manager is considered dead.</description>
        <name>yarn.nm.liveness-monitor.expiry-interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>Path to file with nodes to include.</description>
        <name>yarn.resourcemanager.nodes.include-path</name>
        <value></value>
      </property>
    
      <property>
        <description>Path to file with nodes to exclude.</description>
        <name>yarn.resourcemanager.nodes.exclude-path</name>
        <value></value>
      </property>
    
      <property>
        <description>The expiry interval for node IP caching. -1 disables the caching</description>
        <name>yarn.resourcemanager.node-ip-cache.expiry-interval-secs</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Number of threads to handle resource tracker calls.</description>
        <name>yarn.resourcemanager.resource-tracker.client.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>The class to use as the resource scheduler.</description>
        <name>yarn.resourcemanager.scheduler.class</name>
        <value>org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.CapacityScheduler</value>
      </property>
    
      <property>
        <description>The minimum allocation for every container request at the RM
        in MBs. Memory requests lower than this will be set to the value of this
        property. Additionally, a node manager that is configured to have less memory
        than this value will be shut down by the resource manager.</description>
        <name>yarn.scheduler.minimum-allocation-mb</name>
        <value>1024</value>
      </property>
    
      <property>
        <description>The maximum allocation for every container request at the RM
        in MBs. Memory requests higher than this will throw an
        InvalidResourceRequestException.</description>
        <name>yarn.scheduler.maximum-allocation-mb</name>
        <value>8192</value>
      </property>
    
      <property>
        <description>The minimum allocation for every container request at the RM
        in terms of virtual CPU cores. Requests lower than this will be set to the
        value of this property. Additionally, a node manager that is configured to
        have fewer virtual cores than this value will be shut down by the resource
        manager.</description>
        <name>yarn.scheduler.minimum-allocation-vcores</name>
        <value>1</value>
      </property>
    
      <property>
        <description>The maximum allocation for every container request at the RM
        in terms of virtual CPU cores. Requests higher than this will throw an
        InvalidResourceRequestException.</description>
        <name>yarn.scheduler.maximum-allocation-vcores</name>
        <value>4</value>
      </property>
    
      <property>
        <description>
        Used by node labels.  If set to true, the port should be included in the
        node name.  Only usable if your scheduler supports node labels.
        </description>
        <name>yarn.scheduler.include-port-in-node-name</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Enable RM to recover state after starting. If true, then
          yarn.resourcemanager.store.class must be specified. </description>
        <name>yarn.resourcemanager.recovery.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Should RM fail fast if it encounters any errors. By defalt, it
          points to ${yarn.fail-fast}. Errors include:
          1) exceptions when state-store write/read operations fails.
        </description>
        <name>yarn.resourcemanager.fail-fast</name>
        <value>${yarn.fail-fast}</value>
      </property>
    
      <property>
        <description>Should YARN fail fast if it encounters any errors.
          This is a global config for all other components including RM,NM etc.
          If no value is set for component-specific config (e.g yarn.resourcemanager.fail-fast),
          this value will be the default.
        </description>
        <name>yarn.fail-fast</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Enable RM work preserving recovery. This configuration is private
        to YARN for experimenting the feature.
        </description>
        <name>yarn.resourcemanager.work-preserving-recovery.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Set the amount of time RM waits before allocating new
        containers on work-preserving-recovery. Such wait period gives RM a chance
        to settle down resyncing with NMs in the cluster on recovery, before assigning
        new containers to applications.
        </description>
        <name>yarn.resourcemanager.work-preserving-recovery.scheduling-wait-ms</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>The class to use as the persistent store.
    
          If org.apache.hadoop.yarn.server.resourcemanager.recovery.ZKRMStateStore
          is used, the store is implicitly fenced; meaning a single ResourceManager
          is able to use the store at any point in time. More details on this
          implicit fencing, along with setting up appropriate ACLs is discussed
          under yarn.resourcemanager.zk-state-store.root-node.acl.
        </description>
        <name>yarn.resourcemanager.store.class</name>
        <value>org.apache.hadoop.yarn.server.resourcemanager.recovery.FileSystemRMStateStore</value>
      </property>
    
      <property>
        <description>When automatic failover is enabled, number of zookeeper
          operation retry times in ActiveStandbyElector</description>
        <name>yarn.resourcemanager.ha.failover-controller.active-standby-elector.zk.retries</name>
        
      </property>
    
      <property>
        <description>The maximum number of completed applications RM state
        store keeps, less than or equals to ${yarn.resourcemanager.max-completed-applications}.
        By default, it equals to ${yarn.resourcemanager.max-completed-applications}.
        This ensures that the applications kept in the state store are consistent with
        the applications remembered in RM memory.
        Any values larger than ${yarn.resourcemanager.max-completed-applications} will
        be reset to ${yarn.resourcemanager.max-completed-applications}.
        Note that this value impacts the RM recovery performance. Typically,
        a smaller value indicates better performance on RM recovery.
        </description>
        <name>yarn.resourcemanager.state-store.max-completed-applications</name>
        <value>${yarn.resourcemanager.max-completed-applications}</value>
      </property>
    
      <property>
        <description>Full path of the ZooKeeper znode where RM state will be
        stored. This must be supplied when using
        org.apache.hadoop.yarn.server.resourcemanager.recovery.ZKRMStateStore
        as the value for yarn.resourcemanager.store.class</description>
        <name>yarn.resourcemanager.zk-state-store.parent-path</name>
        <value>/rmstore</value>
      </property>
    
      <property>
        <description>
          ACLs to be used for the root znode when using ZKRMStateStore in an HA
          scenario for fencing.
    
          ZKRMStateStore supports implicit fencing to allow a single
          ResourceManager write-access to the store. For fencing, the
          ResourceManagers in the cluster share read-write-admin privileges on the
          root node, but the Active ResourceManager claims exclusive create-delete
          permissions.
    
          By default, when this property is not set, we use the ACLs from
          yarn.resourcemanager.zk-acl for shared admin access and
          rm-address:random-number for username-based exclusive create-delete
          access.
    
          This property allows users to set ACLs of their choice instead of using
          the default mechanism. For fencing to work, the ACLs should be
          carefully set differently on each ResourceManger such that all the
          ResourceManagers have shared admin access and the Active ResourceManger
          takes over (exclusively) the create-delete access.
        </description>
        <name>yarn.resourcemanager.zk-state-store.root-node.acl</name>
      </property>
    
      <property>
        <description>URI pointing to the location of the FileSystem path where
        RM state will be stored. This must be supplied when using
        org.apache.hadoop.yarn.server.resourcemanager.recovery.FileSystemRMStateStore
        as the value for yarn.resourcemanager.store.class</description>
        <name>yarn.resourcemanager.fs.state-store.uri</name>
        <value>${hadoop.tmp.dir}/yarn/system/rmstore</value>
        
      </property>
    
      <property>
        <description>the number of retries to recover from IOException in
        FileSystemRMStateStore.
        </description>
        <name>yarn.resourcemanager.fs.state-store.num-retries</name>
        <value>0</value>
      </property>
    
      <property>
        <description>Retry interval in milliseconds in FileSystemRMStateStore.
        </description>
        <name>yarn.resourcemanager.fs.state-store.retry-interval-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>Local path where the RM state will be stored when using
        org.apache.hadoop.yarn.server.resourcemanager.recovery.LeveldbRMStateStore
        as the value for yarn.resourcemanager.store.class</description>
        <name>yarn.resourcemanager.leveldb-state-store.path</name>
        <value>${hadoop.tmp.dir}/yarn/system/rmstore</value>
      </property>
    
      <property>
        <description>The time in seconds between full compactions of the leveldb
        database. Setting the interval to zero disables the full compaction
        cycles.</description>
        <name>yarn.resourcemanager.leveldb-state-store.compaction-interval-secs</name>
        <value>3600</value>
      </property>
    
      <property>
        <description>Enable RM high-availability. When enabled,
          (1) The RM starts in the Standby mode by default, and transitions to
          the Active mode when prompted to.
          (2) The nodes in the RM ensemble are listed in
          yarn.resourcemanager.ha.rm-ids
          (3) The id of each RM either comes from yarn.resourcemanager.ha.id
          if yarn.resourcemanager.ha.id is explicitly specified or can be
          figured out by matching yarn.resourcemanager.address.{id} with local address
          (4) The actual physical addresses come from the configs of the pattern
          - {rpc-config}.{id}</description>
        <name>yarn.resourcemanager.ha.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Enable automatic failover.
          By default, it is enabled only when HA is enabled</description>
        <name>yarn.resourcemanager.ha.automatic-failover.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Enable embedded automatic failover.
          By default, it is enabled only when HA is enabled.
          The embedded elector relies on the RM state store to handle fencing,
          and is primarily intended to be used in conjunction with ZKRMStateStore.
        </description>
        <name>yarn.resourcemanager.ha.automatic-failover.embedded</name>
        <value>true</value>
      </property>
    
      <property>
        <description>The base znode path to use for storing leader information,
          when using ZooKeeper based leader election.</description>
        <name>yarn.resourcemanager.ha.automatic-failover.zk-base-path</name>
        <value>/yarn-leader-election</value>
      </property>
    
      <property>
        <description>Index at which last section of application id (with each section
          separated by _ in application id) will be split so that application znode
          stored in zookeeper RM state store will be stored as two different znodes
          (parent-child). Split is done from the end.
          For instance, with no split, appid znode will be of the form
          application_1352994193343_0001. If the value of this config is 1, the
          appid znode will be broken into two parts application_1352994193343_000
          and 1 respectively with former being the parent node.
          application_1352994193343_0002 will then be stored as 2 under the parent
          node application_1352994193343_000. This config can take values from 0 to 4.
          0 means there will be no split. If configuration value is outside this
          range, it will be treated as config value of 0(i.e. no split). A value
          larger than 0 (up to 4) should be configured if you are storing a large number
          of apps in ZK based RM state store and state store operations are failing due to
          LenError in Zookeeper.</description>
        <name>yarn.resourcemanager.zk-appid-node.split-index</name>
        <value>0</value>
      </property>
    
      <property>
        <description>Index at which the RM Delegation Token ids will be split so
          that the delegation token znodes stored in the zookeeper RM state store
          will be stored as two different znodes (parent-child). The split is done
          from the end. For instance, with no split, a delegation token znode will
          be of the form RMDelegationToken_123456789. If the value of this config is
          1, the delegation token znode will be broken into two parts:
          RMDelegationToken_12345678 and 9 respectively with former being the parent
          node. This config can take values from 0 to 4. 0 means there will be no
          split. If the value is outside this range, it will be treated as 0 (i.e.
          no split). A value larger than 0 (up to 4) should be configured if you are
          running a large number of applications, with long-lived delegation tokens
          and state store operations (e.g. failover) are failing due to LenError in
          Zookeeper.</description>
        <name>yarn.resourcemanager.zk-delegation-token-node.split-index</name>
        <value>0</value>
      </property>
    
      <property>
        <description>Specifies the maximum size of the data that can be stored
          in a znode. Value should be same or less than jute.maxbuffer configured
          in zookeeper. Default value configured is 1MB.</description>
        <name>yarn.resourcemanager.zk-max-znode-size.bytes</name>
        <value>1048576</value>
      </property>
    
      <property>
        <description>Name of the cluster. In a HA setting,
          this is used to ensure the RM participates in leader
          election for this cluster and ensures it does not affect
          other clusters</description>
        <name>yarn.resourcemanager.cluster-id</name>
        
      </property>
    
      <property>
        <description>The list of RM nodes in the cluster when HA is
          enabled. See description of yarn.resourcemanager.ha
          .enabled for full details on how this is used.</description>
        <name>yarn.resourcemanager.ha.rm-ids</name>
        
      </property>
    
      <property>
        <description>The id (string) of the current RM. When HA is enabled, this
          is an optional config. The id of current RM can be set by explicitly
          specifying yarn.resourcemanager.ha.id or figured out by matching
          yarn.resourcemanager.address.{id} with local address
          See description of yarn.resourcemanager.ha.enabled
          for full details on how this is used.</description>
        <name>yarn.resourcemanager.ha.id</name>
        
      </property>
    
      <property>
        <description>When HA is enabled, the class to be used by Clients, AMs and
          NMs to failover to the Active RM. It should extend
          org.apache.hadoop.yarn.client.RMFailoverProxyProvider</description>
        <name>yarn.client.failover-proxy-provider</name>
        <value>org.apache.hadoop.yarn.client.ConfiguredRMFailoverProxyProvider</value>
      </property>
    
      <property>
        <description>When HA is enabled, the max number of times
          FailoverProxyProvider should attempt failover. When set,
          this overrides the yarn.resourcemanager.connect.max-wait.ms. When
          not set, this is inferred from
          yarn.resourcemanager.connect.max-wait.ms.</description>
        <name>yarn.client.failover-max-attempts</name>
        
      </property>
    
      <property>
        <description>When HA is enabled, the sleep base (in milliseconds) to be
          used for calculating the exponential delay between failovers. When set,
          this overrides the yarn.resourcemanager.connect.* settings. When
          not set, yarn.resourcemanager.connect.retry-interval.ms is used instead.
        </description>
        <name>yarn.client.failover-sleep-base-ms</name>
        
      </property>
    
      <property>
        <description>When HA is enabled, the maximum sleep time (in milliseconds)
          between failovers. When set, this overrides the
          yarn.resourcemanager.connect.* settings. When not set,
          yarn.resourcemanager.connect.retry-interval.ms is used instead.</description>
        <name>yarn.client.failover-sleep-max-ms</name>
        
      </property>
    
      <property>
        <description>When HA is enabled, the number of retries per
          attempt to connect to a ResourceManager. In other words,
          it is the ipc.client.connect.max.retries to be used during
          failover attempts</description>
        <name>yarn.client.failover-retries</name>
        <value>0</value>
      </property>
    
      <property>
        <description>When HA is enabled, the number of retries per
          attempt to connect to a ResourceManager on socket timeouts. In other
          words, it is the ipc.client.connect.max.retries.on.timeouts to be used
          during failover attempts</description>
        <name>yarn.client.failover-retries-on-socket-timeouts</name>
        <value>0</value>
      </property>
    
      <property>
        <description>The maximum number of completed applications RM keeps. </description>
        <name>yarn.resourcemanager.max-completed-applications</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>Interval at which the delayed token removal thread runs</description>
        <name>yarn.resourcemanager.delayed.delegation-token.removal-interval-ms</name>
        <value>30000</value>
      </property>
    
      <property>
        <description>Maximum size in bytes for configurations that can be provided
          by application to RM for delegation token renewal.
          By experiment, it's roughly 128 bytes per key-value pair.
          The default value 12800 allows roughly 100 configs, may be less.
        </description>
        <name>yarn.resourcemanager.delegation-token.max-conf-size-bytes</name>
        <value>12800</value>
      </property>
    
      <property>
      <description>If true, ResourceManager will have proxy-user privileges.
        Use case: In a secure cluster, YARN requires the user hdfs delegation-tokens to
        do localization and log-aggregation on behalf of the user. If this is set to true,
        ResourceManager is able to request new hdfs delegation tokens on behalf of
        the user. This is needed by long-running-service, because the hdfs tokens
        will eventually expire and YARN requires new valid tokens to do localization
        and log-aggregation. Note that to enable this use case, the corresponding
        HDFS NameNode has to configure ResourceManager as the proxy-user so that
        ResourceManager can itself ask for new tokens on behalf of the user when
        tokens are past their max-life-time.</description>
        <name>yarn.resourcemanager.proxy-user-privileges.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Interval for the roll over for the master key used to generate
            application tokens
        </description>
        <name>yarn.resourcemanager.am-rm-tokens.master-key-rolling-interval-secs</name>
        <value>86400</value>
      </property>
    
      <property>
        <description>Interval for the roll over for the master key used to generate
            container tokens. It is expected to be much greater than
            yarn.nm.liveness-monitor.expiry-interval-ms and
            yarn.resourcemanager.rm.container-allocation.expiry-interval-ms. Otherwise the
            behavior is undefined.
        </description>
        <name>yarn.resourcemanager.container-tokens.master-key-rolling-interval-secs</name>
        <value>86400</value>
      </property>
    
      <property>
        <description>The heart-beat interval in milliseconds for every NodeManager in the cluster.</description>
        <name>yarn.resourcemanager.nodemanagers.heartbeat-interval-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>The minimum allowed version of a connecting nodemanager.  The valid values are
          NONE (no version checking), EqualToRM (the nodemanager's version is equal to
          or greater than the RM version), or a Version String.</description>
        <name>yarn.resourcemanager.nodemanager.minimum.version</name>
        <value>NONE</value>
      </property>
    
      <property>
        <description>Enable a set of periodic monitors (specified in
            yarn.resourcemanager.scheduler.monitor.policies) that affect the
            scheduler.</description>
        <name>yarn.resourcemanager.scheduler.monitor.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The list of SchedulingEditPolicy classes that interact with
            the scheduler. A particular module may be incompatible with the
            scheduler, other policies, or a configuration of either.</description>
        <name>yarn.resourcemanager.scheduler.monitor.policies</name>
        <value>org.apache.hadoop.yarn.server.resourcemanager.monitor.capacity.ProportionalCapacityPreemptionPolicy</value>
      </property>
    
      <property>
        <description>The class to use as the configuration provider.
        If org.apache.hadoop.yarn.LocalConfigurationProvider is used,
        the local configuration will be loaded.
        If org.apache.hadoop.yarn.FileSystemBasedConfigurationProvider is used,
        the configuration which will be loaded should be uploaded to remote File system first.
        </description>
        <name>yarn.resourcemanager.configuration.provider-class</name>
        <value>org.apache.hadoop.yarn.LocalConfigurationProvider</value>
        
      </property>
    
      <property>
        <description>
        The value specifies the file system (e.g. HDFS) path where ResourceManager
        loads configuration if yarn.resourcemanager.configuration.provider-class
        is set to org.apache.hadoop.yarn.FileSystemBasedConfigurationProvider.
        </description>
        <name>yarn.resourcemanager.configuration.file-system-based-store</name>
        <value>/yarn/conf</value>
      </property>
    
      <property>
        <description>The setting that controls whether yarn system metrics is
        published to the Timeline server (version one) or not, by RM.
        This configuration is now deprecated in favor of
        yarn.system-metrics-publisher.enabled.</description>
        <name>yarn.resourcemanager.system-metrics-publisher.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The setting that controls whether yarn system metrics is
        published on the Timeline service or not by RM And NM.</description>
        <name>yarn.system-metrics-publisher.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The setting that controls whether yarn container events are
        published to the timeline service or not by RM. This configuration setting
        is for ATS V2.</description>
        <name>yarn.rm.system-metrics-publisher.emit-container-events</name>
        <value>false</value>
      </property>
    
    
      <property>
        <description>Number of worker threads that send the yarn system metrics
        data.</description>
        <name>yarn.resourcemanager.system-metrics-publisher.dispatcher.pool-size</name>
        <value>10</value>
      </property>
    
      <property>
        <description>Number of diagnostics/failure messages can be saved in RM for
        log aggregation. It also defines the number of diagnostics/failure
        messages can be shown in log aggregation web ui.</description>
        <name>yarn.resourcemanager.max-log-aggregation-diagnostics-in-memory</name>
        <value>10</value>
      </property>
    
      
    
      <property>
        <description>
        RM DelegationTokenRenewer thread count
        </description>
        <name>yarn.resourcemanager.delegation-token-renewer.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>
        RM secret key update interval in ms
        </description>
        <name>yarn.resourcemanager.delegation.key.update-interval</name>
        <value>86400000</value>
      </property>
    
      <property>
        <description>
        RM delegation token maximum lifetime in ms
        </description>
        <name>yarn.resourcemanager.delegation.token.max-lifetime</name>
        <value>604800000</value>
      </property>
    
      <property>
        <description>
        RM delegation token update interval in ms
        </description>
        <name>yarn.resourcemanager.delegation.token.renew-interval</name>
        <value>86400000</value>
      </property>
    
      <property>
        <description>
        Thread pool size for RMApplicationHistoryWriter.
        </description>
        <name>yarn.resourcemanager.history-writer.multi-threaded-dispatcher.pool-size</name>
        <value>10</value>
      </property>
    
      <property>
        <description>
        Comma-separated list of values (in minutes) for schedule queue related
        metrics.
        </description>
        <name>yarn.resourcemanager.metrics.runtime.buckets</name>
        <value>60,300,1440</value>
      </property>
    
      <property>
        <description>
        Interval for the roll over for the master key used to generate
        NodeManager tokens.  It is expected to be set to a value much larger
        than yarn.nm.liveness-monitor.expiry-interval-ms.
        </description>
        <name>yarn.resourcemanager.nm-tokens.master-key-rolling-interval-secs</name>
        <value>86400</value>
      </property>
    
      <property>
        <description>
        Flag to enable the ResourceManager reservation system.
        </description>
        <name>yarn.resourcemanager.reservation-system.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        The Java class to use as the ResourceManager reservation system.
        By default, is set to
        org.apache.hadoop.yarn.server.resourcemanager.reservation.CapacityReservationSystem
        when using CapacityScheduler and is set to
        org.apache.hadoop.yarn.server.resourcemanager.reservation.FairReservationSystem
        when using FairScheduler.
        </description>
        <name>yarn.resourcemanager.reservation-system.class</name>
        <value></value>
      </property>
    
      <property>
        <description>
        The plan follower policy class name to use for the ResourceManager
        reservation system.
        By default, is set to
        org.apache.hadoop.yarn.server.resourcemanager.reservation.CapacitySchedulerPlanFollower
        is used when using CapacityScheduler, and is set to
        org.apache.hadoop.yarn.server.resourcemanager.reservation.FairSchedulerPlanFollower
        when using FairScheduler.
        </description>
        <name>yarn.resourcemanager.reservation-system.plan.follower</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Step size of the reservation system in ms
        </description>
        <name>yarn.resourcemanager.reservation-system.planfollower.time-step</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>
        The expiry interval for a container
        </description>
        <name>yarn.resourcemanager.rm.container-allocation.expiry-interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>
        Flag to enable/disable resource profiles
        </description>
        <name>yarn.resourcemanager.resource-profiles.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        If resource profiles is enabled, source file for the profiles
        </description>
        <name>yarn.resourcemanager.resource-profiles.source-file</name>
        <value>resource-profiles.json</value>
      </property>
    
      
    
      <property>
        <description>The hostname of the NM.</description>
        <name>yarn.nodemanager.hostname</name>
        <value>0.0.0.0</value>
      </property>
      
      <property>
        <description>The address of the container manager in the NM.</description>
        <name>yarn.nodemanager.address</name>
        <value>${yarn.nodemanager.hostname}:0</value>
      </property>
    
      <property>
        <description>
          The actual address the server will bind to. If this optional address is
          set, the RPC and webapp servers will bind to this address and the port specified in
          yarn.nodemanager.address and yarn.nodemanager.webapp.address, respectively. This is
          most useful for making NM listen to all interfaces by setting to 0.0.0.0.
        </description>
        <name>yarn.nodemanager.bind-host</name>
        <value></value>
      </property>
    
      <property>
        <description>Environment variables that should be forwarded from the NodeManager's environment to the container's.</description>
        <name>yarn.nodemanager.admin-env</name>
        <value>MALLOC_ARENA_MAX=$MALLOC_ARENA_MAX</value>
      </property>
    
      <property>
        <description>Environment variables that containers may override rather than use NodeManager's default.</description>
        <name>yarn.nodemanager.env-whitelist</name>
        <value>JAVA_HOME,HADOOP_COMMON_HOME,HADOOP_HDFS_HOME,HADOOP_CONF_DIR,CLASSPATH_PREPEND_DISTCACHE,HADOOP_YARN_HOME,HADOOP_HOME,PATH,LANG,TZ</value>
      </property>
    
      <property>
        <description>who will execute(launch) the containers.</description>
        <name>yarn.nodemanager.container-executor.class</name>
        <value>org.apache.hadoop.yarn.server.nodemanager.DefaultContainerExecutor</value>
      </property>
    
      <property>
        <description>Comma separated List of container state transition listeners.</description>
        <name>yarn.nodemanager.container-state-transition-listener.classes</name>
        <value></value>
      </property>
    
      <property>
        <description>Number of threads container manager uses.</description>
        <name>yarn.nodemanager.container-manager.thread-count</name>
        <value>20</value>
      </property>
    
        <property>
        <description>Number of threads collector service uses.</description>
        <name>yarn.nodemanager.collector-service.thread-count</name>
        <value>5</value>
      </property>
    
      <property>
        <description>Number of threads used in cleanup.</description>
        <name>yarn.nodemanager.delete.thread-count</name>
        <value>4</value>
      </property>
    
      <property>
        <description>Max number of OPPORTUNISTIC containers to queue at the
          nodemanager.</description>
        <name>yarn.nodemanager.opportunistic-containers-max-queue-length</name>
        <value>0</value>
      </property>
    
      <property>
        <description>
          Number of seconds after an application finishes before the nodemanager's 
          DeletionService will delete the application's localized file directory
          and log directory.
          
          To diagnose YARN application problems, set this property's value large
          enough (for example, to 600 = 10 minutes) to permit examination of these
          directories. After changing the property's value, you must restart the 
          nodemanager in order for it to have an effect.
    
          The roots of YARN applications' work directories is configurable with
          the yarn.nodemanager.local-dirs property (see below), and the roots
          of the YARN applications' log directories is configurable with the
          yarn.nodemanager.log-dirs property (see also below).
        </description>
        <name>yarn.nodemanager.delete.debug-delay-sec</name>
        <value>0</value>
      </property>
    
      <property>
        <description>Keytab for NM.</description>
        <name>yarn.nodemanager.keytab</name>
        <value>/etc/krb5.keytab</value>
      </property>
    
      <property>
        <description>List of directories to store localized files in. An 
          application's localized file directory will be found in:
          ${yarn.nodemanager.local-dirs}/usercache/${user}/appcache/application_${appid}.
          Individual containers' work directories, called container_${contid}, will
          be subdirectories of this.
       </description>
        <name>yarn.nodemanager.local-dirs</name>
        <value>${hadoop.tmp.dir}/nm-local-dir</value>
      </property>
    
      <property>
        <description>It limits the maximum number of files which will be localized
          in a single local directory. If the limit is reached then sub-directories
          will be created and new files will be localized in them. If it is set to
          a value less than or equal to 36 [which are sub-directories (0-9 and then
          a-z)] then NodeManager will fail to start. For example; [for public
          cache] if this is configured with a value of 40 ( 4 files +
          36 sub-directories) and the local-dir is "/tmp/local-dir1" then it will
          allow 4 files to be created directly inside "/tmp/local-dir1/filecache".
          For files that are localized further it will create a sub-directory "0"
          inside "/tmp/local-dir1/filecache" and will localize files inside it
          until it becomes full. If a file is removed from a sub-directory that
          is marked full, then that sub-directory will be used back again to
          localize files.
       </description>
        <name>yarn.nodemanager.local-cache.max-files-per-directory</name>
        <value>8192</value>
      </property>
    
      <property>
        <description>Address where the localizer IPC is.</description>
        <name>yarn.nodemanager.localizer.address</name>
        <value>${yarn.nodemanager.hostname}:8040</value>
      </property>
    
    
      <property>
        <description>Address where the collector service IPC is.</description>
        <name>yarn.nodemanager.collector-service.address</name>
        <value>${yarn.nodemanager.hostname}:8048</value>
      </property>
    
      <property>
        <description>Interval in between cache cleanups.</description>
        <name>yarn.nodemanager.localizer.cache.cleanup.interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>Target size of localizer cache in MB, per nodemanager. It is
          a target retention size that only includes resources with PUBLIC and 
          PRIVATE visibility and excludes resources with APPLICATION visibility
        </description>
        <name>yarn.nodemanager.localizer.cache.target-size-mb</name>
        <value>10240</value>
      </property>
    
      <property>
        <description>Number of threads to handle localization requests.</description>
        <name>yarn.nodemanager.localizer.client.thread-count</name>
        <value>5</value>
      </property>
    
      <property>
        <description>Number of threads to use for localization fetching.</description>
        <name>yarn.nodemanager.localizer.fetch.thread-count</name>
        <value>4</value>
      </property>
    
      <property>
        <description>
        </description>
        <name>yarn.nodemanager.container-localizer.java.opts</name>
        <value>-Xmx256m</value>
      </property>
    
      <property>
        <description>
          The log level for container localizer while it is an independent process.
        </description>
        <name>yarn.nodemanager.container-localizer.log.level</name>
        <value>INFO</value>
      </property>
    
      <property>
        <description>
          Where to store container logs. An application's localized log directory
          will be found in ${yarn.nodemanager.log-dirs}/application_${appid}.
          Individual containers' log directories will be below this, in directories 
          named container_{$contid}. Each container directory will contain the files
          stderr, stdin, and syslog generated by that container.
        </description>
        <name>yarn.nodemanager.log-dirs</name>
        <value>${yarn.log.dir}/userlogs</value>
      </property>
    
      <property>
        <description>
          The permissions settings used for the creation of container
          directories when using DefaultContainerExecutor.  This follows
          standard user/group/all permissions format.
        </description>
        <name>yarn.nodemanager.default-container-executor.log-dirs.permissions</name>
        <value>710</value>
      </property>
    
      <property>
        <description>Whether to enable log aggregation. Log aggregation collects
          each container's logs and moves these logs onto a file-system, for e.g.
          HDFS, after the application completes. Users can configure the
          "yarn.nodemanager.remote-app-log-dir" and
          "yarn.nodemanager.remote-app-log-dir-suffix" properties to determine
          where these logs are moved to. Users can access the logs via the
          Application Timeline Server.
        </description>
        <name>yarn.log-aggregation-enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>How long to keep aggregation logs before deleting them.  -1 disables. 
        Be careful set this too small and you will spam the name node.</description>
        <name>yarn.log-aggregation.retain-seconds</name>
        <value>-1</value>
      </property> 
      
      <property>
        <description>How long to wait between aggregated log retention checks.
        If set to 0 or a negative value then the value is computed as one-tenth
        of the aggregated log retention time. Be careful set this too small and
        you will spam the name node.</description>
        <name>yarn.log-aggregation.retain-check-interval-seconds</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Specify which log file controllers we will support. The first
        file controller we add will be used to write the aggregated logs.
        This comma separated configuration will work with the configuration:
        yarn.log-aggregation.file-controller.%s.class which defines the supported
        file controller's class. By default, the TFile controller would be used.
        The user could override this configuration by adding more file controllers.
        To support back-ward compatibility, make sure that we always
        add TFile file controller.</description>
        <name>yarn.log-aggregation.file-formats</name>
        <value>TFile</value>
      </property>
    
      <property>
        <description>Class that supports TFile read and write operations.</description>
        <name>yarn.log-aggregation.file-controller.TFile.class</name>
        <value>org.apache.hadoop.yarn.logaggregation.filecontroller.tfile.LogAggregationTFileController</value>
      </property>
    
      <property>
        <description>
        How long for ResourceManager to wait for NodeManager to report its
        log aggregation status. If waiting time of which the log aggregation
        status is reported from NodeManager exceeds the configured value, RM
        will report log aggregation status for this NodeManager as TIME_OUT.
        This configuration will be used in NodeManager as well to decide
        whether and when to delete the cached log aggregation status.
        </description>
        <name>yarn.log-aggregation-status.time-out.ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>Time in seconds to retain user logs. Only applicable if
        log aggregation is disabled
        </description>
        <name>yarn.nodemanager.log.retain-seconds</name>
        <value>10800</value>
      </property>
    
      <property>
        <description>Where to aggregate logs to.</description>
        <name>yarn.nodemanager.remote-app-log-dir</name>
        <value>/tmp/logs</value>
      </property>
      <property>
        <description>The remote log dir will be created at 
          {yarn.nodemanager.remote-app-log-dir}/${user}/{thisParam}
        </description>
        <name>yarn.nodemanager.remote-app-log-dir-suffix</name>
        <value>logs</value>
      </property>
    
      <property>
        <description>Generate additional logs about container launches.
        Currently, this creates a copy of the launch script and lists the
        directory contents of the container work dir. When listing directory
        contents, we follow symlinks to a max-depth of 5(including symlinks
        which point to outside the container work dir) which may lead to a
        slowness in launching containers.
        </description>
        <name>yarn.nodemanager.log-container-debug-info.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Amount of physical memory, in MB, that can be allocated 
        for containers. If set to -1 and
        yarn.nodemanager.resource.detect-hardware-capabilities is true, it is
        automatically calculated(in case of Windows and Linux).
        In other cases, the default is 8192MB.
        </description>
        <name>yarn.nodemanager.resource.memory-mb</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Amount of physical memory, in MB, that is reserved
        for non-YARN processes. This configuration is only used if
        yarn.nodemanager.resource.detect-hardware-capabilities is set
        to true and yarn.nodemanager.resource.memory-mb is -1. If set
        to -1, this amount is calculated as
        20% of (system memory - 2*HADOOP_HEAPSIZE)
        </description>
        <name>yarn.nodemanager.resource.system-reserved-memory-mb</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Whether YARN CGroups memory tracking is enabled.</description>
        <name>yarn.nodemanager.resource.memory.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Whether YARN CGroups strict memory enforcement is enabled.
        </description>
        <name>yarn.nodemanager.resource.memory.enforced</name>
        <value>true</value>
      </property>
    
      <property>
        <description>If memory limit is enforced, this the percentage of soft limit
          compared to the memory assigned to the container. If there is memory
          pressure container memory usage will be pushed back to its soft limit
          by swapping out memory.
        </description>
        <name>yarn.nodemanager.resource.memory.cgroups.soft-limit-percentage</name>
        <value>90.0</value>
      </property>
    
      <property>
        <description>Container swappiness is the likelihood a page will be swapped
          out compared to be kept in memory. Value is between 0-100.
        </description>
        <name>yarn.nodemanager.resource.memory.cgroups.swappiness</name>
        <value>0</value>
      </property>
    
      <property>
        <description>Whether physical memory limits will be enforced for
        containers.</description>
        <name>yarn.nodemanager.pmem-check-enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Whether virtual memory limits will be enforced for
        containers.</description>
        <name>yarn.nodemanager.vmem-check-enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Ratio between virtual memory to physical memory when
        setting memory limits for containers. Container allocations are
        expressed in terms of physical memory, and virtual memory usage
        is allowed to exceed this allocation by this ratio.
        </description>
        <name>yarn.nodemanager.vmem-pmem-ratio</name>
        <value>2.1</value>
      </property>
    
      <property>
        <description>Number of vcores that can be allocated
        for containers. This is used by the RM scheduler when allocating
        resources for containers. This is not used to limit the number of
        CPUs used by YARN containers. If it is set to -1 and
        yarn.nodemanager.resource.detect-hardware-capabilities is true, it is
        automatically determined from the hardware in case of Windows and Linux.
        In other cases, number of vcores is 8 by default.</description>
        <name>yarn.nodemanager.resource.cpu-vcores</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Flag to determine if logical processors(such as
        hyperthreads) should be counted as cores. Only applicable on Linux
        when yarn.nodemanager.resource.cpu-vcores is set to -1 and
        yarn.nodemanager.resource.detect-hardware-capabilities is true.
        </description>
        <name>yarn.nodemanager.resource.count-logical-processors-as-cores</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Multiplier to determine how to convert phyiscal cores to
        vcores. This value is used if yarn.nodemanager.resource.cpu-vcores
        is set to -1(which implies auto-calculate vcores) and
        yarn.nodemanager.resource.detect-hardware-capabilities is set to true. The
        number of vcores will be calculated as
        number of CPUs * multiplier.
        </description>
        <name>yarn.nodemanager.resource.pcores-vcores-multiplier</name>
        <value>1.0</value>
      </property>
    
      <property>
        <description>
        Thread pool size for LogAggregationService in Node Manager.
        </description>
        <name>yarn.nodemanager.logaggregation.threadpool-size-max</name>
        <value>100</value>
      </property>
    
      <property>
        <description>Percentage of CPU that can be allocated
        for containers. This setting allows users to limit the amount of
        CPU that YARN containers use. Currently functional only
        on Linux using cgroups. The default is to use 100% of CPU.
        </description>
        <name>yarn.nodemanager.resource.percentage-physical-cpu-limit</name>
        <value>100</value>
      </property>
    
      <property>
        <description>Enable auto-detection of node capabilities such as
        memory and CPU.
        </description>
        <name>yarn.nodemanager.resource.detect-hardware-capabilities</name>
        <value>false</value>
      </property>
    
      <property>
        <description>NM Webapp address.</description>
        <name>yarn.nodemanager.webapp.address</name>
        <value>${yarn.nodemanager.hostname}:8042</value>
      </property>
    
      <property>
        <description>
        The https adddress of the NM web application.
        </description>
        <name>yarn.nodemanager.webapp.https.address</name>
        <value>0.0.0.0:8044</value>
      </property>
    
      <property>
        <description>
        The Kerberos keytab file to be used for spnego filter for the NM web
        interface.
        </description>
        <name>yarn.nodemanager.webapp.spnego-keytab-file</name>
        <value></value>
      </property>
    
      <property>
        <description>
        The Kerberos principal to be used for spnego filter for the NM web
        interface.
        </description>
        <name>yarn.nodemanager.webapp.spnego-principal</name>
        <value></value>
      </property>
    
      <property>
        <description>How often to monitor the node and the containers.
        If 0 or negative, monitoring is disabled.</description>
        <name>yarn.nodemanager.resource-monitor.interval-ms</name>
        <value>3000</value>
      </property>
    
      <property>
        <description>Class that calculates current resource utilization.</description>
        <name>yarn.nodemanager.resource-calculator.class</name>
      </property>
    
      <property>
        <description>Enable container monitor</description>
        <name>yarn.nodemanager.container-monitor.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>How often to monitor containers. If not set, the value for
        yarn.nodemanager.resource-monitor.interval-ms will be used.
        If 0 or negative, container monitoring is disabled.</description>
        <name>yarn.nodemanager.container-monitor.interval-ms</name>
      </property>
    
      <property>
        <description>Class that calculates containers current resource utilization.
        If not set, the value for yarn.nodemanager.resource-calculator.class will
        be used.</description>
        <name>yarn.nodemanager.container-monitor.resource-calculator.class</name>
      </property>
    
      <property>
        <description>Frequency of running node health script.</description>
        <name>yarn.nodemanager.health-checker.interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>Script time out period.</description>
        <name>yarn.nodemanager.health-checker.script.timeout-ms</name>
        <value>1200000</value>
      </property>
    
      <property>
        <description>The health check script to run.</description>
        <name>yarn.nodemanager.health-checker.script.path</name>
        <value></value>
      </property>
    
      <property>
        <description>The arguments to pass to the health check script.</description>
        <name>yarn.nodemanager.health-checker.script.opts</name>
        <value></value>
      </property>
    
      <property>
        <description>Frequency of running disk health checker code.</description>
        <name>yarn.nodemanager.disk-health-checker.interval-ms</name>
        <value>120000</value>
      </property>
    
      <property>
        <description>The minimum fraction of number of disks to be healthy for the
        nodemanager to launch new containers. This correspond to both
        yarn.nodemanager.local-dirs and yarn.nodemanager.log-dirs. i.e. If there
        are less number of healthy local-dirs (or log-dirs) available, then
        new containers will not be launched on this node.</description>
        <name>yarn.nodemanager.disk-health-checker.min-healthy-disks</name>
        <value>0.25</value>
      </property>
    
      <property>
        <description>The maximum percentage of disk space utilization allowed after 
        which a disk is marked as bad. Values can range from 0.0 to 100.0. 
        If the value is greater than or equal to 100, the nodemanager will check 
        for full disk. This applies to yarn.nodemanager.local-dirs and
        yarn.nodemanager.log-dirs.</description>
        <name>yarn.nodemanager.disk-health-checker.max-disk-utilization-per-disk-percentage</name>
        <value>90.0</value>
      </property>
    
      <property>
        <description>The low threshold percentage of disk space used when a bad disk is
        marked as good. Values can range from 0.0 to 100.0. This applies to
        yarn.nodemanager.local-dirs and yarn.nodemanager.log-dirs.
        Note that if its value is more than yarn.nodemanager.disk-health-checker.
        max-disk-utilization-per-disk-percentage or not set, it will be set to the same value as
        yarn.nodemanager.disk-health-checker.max-disk-utilization-per-disk-percentage.</description>
        <name>yarn.nodemanager.disk-health-checker.disk-utilization-watermark-low-per-disk-percentage</name>
        <value></value>
      </property>
    
      <property>
        <description>The minimum space that must be available on a disk for
        it to be used. This applies to yarn.nodemanager.local-dirs and
        yarn.nodemanager.log-dirs.</description>
        <name>yarn.nodemanager.disk-health-checker.min-free-space-per-disk-mb</name>
        <value>0</value>
      </property>
    
      <property>
        <description>The path to the Linux container executor.</description>
        <name>yarn.nodemanager.linux-container-executor.path</name>
      </property>
    
      <property>
        <description>The class which should help the LCE handle resources.</description>
        <name>yarn.nodemanager.linux-container-executor.resources-handler.class</name>
        <value>org.apache.hadoop.yarn.server.nodemanager.util.DefaultLCEResourcesHandler</value>
        
      </property>
    
      <property>
        <description>The cgroups hierarchy under which to place YARN proccesses (cannot contain commas).
        If yarn.nodemanager.linux-container-executor.cgroups.mount is false
        (that is, if cgroups have been pre-configured) and the YARN user has write
        access to the parent directory, then the directory will be created.
        If the directory already exists, the administrator has to give YARN
        write permissions to it recursively.
        This property only applies when the LCE resources handler is set to
        CgroupsLCEResourcesHandler.</description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.hierarchy</name>
        <value>/hadoop-yarn</value>
      </property>
    
      <property>
        <description>Whether the LCE should attempt to mount cgroups if not found.
        This property only applies when the LCE resources handler is set to
        CgroupsLCEResourcesHandler.
        </description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.mount</name>
        <value>false</value>
      </property>
    
      <property>
        <description>This property sets the path from which YARN will read the
        CGroups configuration. YARN has built-in functionality to discover the
        system CGroup mount paths, so use this property only if YARN's automatic
        mount path discovery does not work.
    
        The path specified by this property must exist before the NodeManager is
        launched.
        If yarn.nodemanager.linux-container-executor.cgroups.mount is set to true,
        YARN will first try to mount the CGroups at the specified path before
        reading them.
        If yarn.nodemanager.linux-container-executor.cgroups.mount is set to
        false, YARN will read the CGroups at the specified path.
        If this property is empty, YARN tries to detect the CGroups location.
    
        Please refer to NodeManagerCgroups.html in the documentation for further
        details.
        This property only applies when the LCE resources handler is set to
        CgroupsLCEResourcesHandler.
        </description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.mount-path</name>
      </property>
    
      <property>
        <description>Delay in ms between attempts to remove linux cgroup</description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.delete-delay-ms</name>
        <value>20</value>
      </property>
    
      <property>
        <description>This determines which of the two modes that LCE should use on
          a non-secure cluster.  If this value is set to true, then all containers
          will be launched as the user specified in
          yarn.nodemanager.linux-container-executor.nonsecure-mode.local-user.  If
          this value is set to false, then containers will run as the user who
          submitted the application.</description>
        <name>yarn.nodemanager.linux-container-executor.nonsecure-mode.limit-users</name>
        <value>true</value>
      </property>
    
      <property>
        <description>The UNIX user that containers will run as when
          Linux-container-executor is used in nonsecure mode (a use case for this
          is using cgroups) if the
          yarn.nodemanager.linux-container-executor.nonsecure-mode.limit-users is
          set to true.</description>
        <name>yarn.nodemanager.linux-container-executor.nonsecure-mode.local-user</name>
        <value>nobody</value>
      </property>
    
      <property>
        <description>The allowed pattern for UNIX user names enforced by
        Linux-container-executor when used in nonsecure mode (use case for this
        is using cgroups). The default value is taken from /usr/sbin/adduser</description>
        <name>yarn.nodemanager.linux-container-executor.nonsecure-mode.user-pattern</name>
        <value>^[_.A-Za-z0-9][-@_.A-Za-z0-9]{0,255}?[$]?$</value>
      </property>
    
      <property>
        <description>This flag determines whether apps should run with strict resource limits
        or be allowed to consume spare resources if they need them. For example, turning the
        flag on will restrict apps to use only their share of CPU, even if the node has spare
        CPU cycles. The default value is false i.e. use available resources. Please note that
        turning this flag on may reduce job throughput on the cluster. This setting does
        not apply to other subsystems like memory.</description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.strict-resource-usage</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Comma separated list of runtimes that are allowed when using
        LinuxContainerExecutor. The allowed values are default, docker, and
        javasandbox.</description>
        <name>yarn.nodemanager.runtime.linux.allowed-runtimes</name>
        <value>default</value>
      </property>
    
      <property>
        <description>This configuration setting determines the capabilities
          assigned to docker containers when they are launched. While these may not
          be case-sensitive from a docker perspective, it is best to keep these
          uppercase. To run without any capabilites, set this value to
          "none" or "NONE"</description>
        <name>yarn.nodemanager.runtime.linux.docker.capabilities</name>
        <value>CHOWN,DAC_OVERRIDE,FSETID,FOWNER,MKNOD,NET_RAW,SETGID,SETUID,SETFCAP,SETPCAP,NET_BIND_SERVICE,SYS_CHROOT,KILL,AUDIT_WRITE</value>
      </property>
    
      <property>
        <description>This configuration setting determines if
          privileged docker containers are allowed on this cluster.
          Use with extreme care.</description>
        <name>yarn.nodemanager.runtime.linux.docker.privileged-containers.allowed</name>
        <value>false</value>
      </property>
    
      <property>
        <description>This configuration setting determines who is allowed to run
          privileged docker containers on this cluster. Use with extreme care.
        </description>
        <name>yarn.nodemanager.runtime.linux.docker.privileged-containers.acl</name>
        <value></value>
      </property>
    
      <property>
        <description>The set of networks allowed when launching containers using the
          DockerContainerRuntime.</description>
        <name>yarn.nodemanager.runtime.linux.docker.allowed-container-networks</name>
        <value>host,none,bridge</value>
      </property>
    
      <property>
        <description>The network used when launching containers using the
          DockerContainerRuntime when no network is specified in the request
          . This network must be one of the (configurable) set of allowed container
          networks.</description>
        <name>yarn.nodemanager.runtime.linux.docker.default-container-network</name>
        <value>host</value>
      </property>
    
      <property>
        <description>This configuration setting determines whether the host's PID
          namespace is allowed for docker containers on this cluster.
          Use with care.</description>
        <name>yarn.nodemanager.runtime.linux.docker.host-pid-namespace.allowed</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Property to enable docker user remapping</description>
        <name>yarn.nodemanager.runtime.linux.docker.enable-userremapping.allowed</name>
        <value>true</value>
      </property>
    
      <property>
        <description>lower limit for acceptable uids of user remapped user</description>
        <name>yarn.nodemanager.runtime.linux.docker.userremapping-uid-threshold</name>
        <value>1</value>
      </property>
    
    
      <property>
        <description>lower limit for acceptable gids of user remapped user</description>
        <name>yarn.nodemanager.runtime.linux.docker.userremapping-gid-threshold</name>
        <value>1</value>
      </property>
    
      <property>
        <description>Whether or not users are allowed to request that Docker
          containers honor the debug deletion delay. This is useful for
          troubleshooting Docker container related launch failures.</description>
        <name>yarn.nodemanager.runtime.linux.docker.delayed-removal.allowed</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The default list of read-only mounts to be bind-mounted
          into all Docker containers that use DockerContainerRuntime.</description>
        <name>yarn.nodemanager.runtime.linux.docker.default-ro-mounts</name>
        <value></value>
      </property>
    
      <property>
        <description>The default list of read-write mounts to be bind-mounted
          into all Docker containers that use DockerContainerRuntime.</description>
        <name>yarn.nodemanager.runtime.linux.docker.default-rw-mounts</name>
        <value></value>
      </property>
    
      <property>
        <description>The mode in which the Java Container Sandbox should run detailed by
          the JavaSandboxLinuxContainerRuntime.</description>
        <name>yarn.nodemanager.runtime.linux.sandbox-mode</name>
        <value>disabled</value>
      </property>
    
      <property>
        <description>Permissions for application local directories.</description>
        <name>yarn.nodemanager.runtime.linux.sandbox-mode.local-dirs.permissions</name>
        <value>read</value>
      </property>
    
      <property>
        <description>Location for non-default java policy file.</description>
        <name>yarn.nodemanager.runtime.linux.sandbox-mode.policy</name>
        <value></value>
      </property>
    
      <property>
        <description>The group which will run by default without the java security
          manager.</description>
        <name>yarn.nodemanager.runtime.linux.sandbox-mode.whitelist-group</name>
        <value></value>
      </property>
    
      <property>
        <description>This flag determines whether memory limit will be set for the Windows Job
        Object of the containers launched by the default container executor.</description>
        <name>yarn.nodemanager.windows-container.memory-limit.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>This flag determines whether CPU limit will be set for the Windows Job
        Object of the containers launched by the default container executor.</description>
        <name>yarn.nodemanager.windows-container.cpu-limit.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Interval of time the linux container executor should try cleaning up
        cgroups entry when cleaning up a container.
        </description>
        <name>yarn.nodemanager.linux-container-executor.cgroups.delete-timeout-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>
        The UNIX group that the linux-container-executor should run as.
        </description>
        <name>yarn.nodemanager.linux-container-executor.group</name>
        <value></value>
      </property>
    
      <property>
        <description>T-file compression types used to compress aggregated logs.</description>
        <name>yarn.nodemanager.log-aggregation.compression-type</name>
        <value>none</value>
      </property>
    
      <property>
        <description>The kerberos principal for the node manager.</description>
        <name>yarn.nodemanager.principal</name>
        <value></value>
      </property>
    
      <property>
        <description>A comma separated list of services where service name should only
          contain a-zA-Z0-9_ and can not start with numbers</description>
        <name>yarn.nodemanager.aux-services</name>
        <value></value>
        
      </property>
    
      <property>
        <description>No. of ms to wait between sending a SIGTERM and SIGKILL to a container</description>
        <name>yarn.nodemanager.sleep-delay-before-sigkill.ms</name>
        <value>250</value>
      </property>
    
      <property>
        <description>Max time to wait for a process to come up when trying to cleanup a container</description>
        <name>yarn.nodemanager.process-kill-wait.ms</name>
        <value>5000</value>
      </property>
    
      <property>
        <description>The minimum allowed version of a resourcemanager that a nodemanager will connect to.  
          The valid values are NONE (no version checking), EqualToNM (the resourcemanager's version is 
          equal to or greater than the NM version), or a Version String.</description>
        <name>yarn.nodemanager.resourcemanager.minimum.version</name>
        <value>NONE</value>
      </property>
    
      <property>
        <description>Maximum size of contain's diagnostics to keep for relaunching
          container case.</description>
        <name>yarn.nodemanager.container-diagnostics-maximum-size</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>Minimum container restart interval in milliseconds.</description>
        <name>yarn.nodemanager.container-retry-minimum-interval-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>Max number of threads in NMClientAsync to process container
        management events</description>
        <name>yarn.client.nodemanager-client-async.thread-pool-max-size</name>
        <value>500</value>
      </property>
    
      <property>
        <description>Max time to wait to establish a connection to NM</description>
        <name>yarn.client.nodemanager-connect.max-wait-ms</name>
        <value>180000</value>
      </property>
    
      <property>
        <description>Time interval between each attempt to connect to NM</description>
        <name>yarn.client.nodemanager-connect.retry-interval-ms</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>
          Max time to wait for NM to connect to RM.
          When not set, proxy will fall back to use value of
          yarn.resourcemanager.connect.max-wait.ms.
        </description>
        <name>yarn.nodemanager.resourcemanager.connect.max-wait.ms</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Time interval between each NM attempt to connect to RM.
          When not set, proxy will fall back to use value of
          yarn.resourcemanager.connect.retry-interval.ms.
        </description>
        <name>yarn.nodemanager.resourcemanager.connect.retry-interval.ms</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Maximum number of proxy connections to cache for node managers. If set
          to a value greater than zero then the cache is enabled and the NMClient
          and MRAppMaster will cache the specified number of node manager proxies.
          There will be at max one proxy per node manager. Ex. configuring it to a
          value of 5 will make sure that client will at max have 5 proxies cached
          with 5 different node managers. These connections for these proxies will
          be timed out if idle for more than the system wide idle timeout period.
          Note that this could cause issues on large clusters as many connections
          could linger simultaneously and lead to a large number of connection
          threads. The token used for authentication will be used only at
          connection creation time. If a new token is received then the earlier
          connection should be closed in order to use the new token. This and
          (yarn.client.nodemanager-client-async.thread-pool-max-size) are related
          and should be in sync (no need for them to be equal).
          If the value of this property is zero then the connection cache is
          disabled and connections will use a zero idle timeout to prevent too
          many connection threads on large clusters.
        </description>
        <name>yarn.client.max-cached-nodemanagers-proxies</name>
        <value>0</value>
      </property>
      
      <property>
        <description>Enable the node manager to recover after starting</description>
        <name>yarn.nodemanager.recovery.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The local filesystem directory in which the node manager will
        store state when recovery is enabled.</description>
        <name>yarn.nodemanager.recovery.dir</name>
        <value>${hadoop.tmp.dir}/yarn-nm-recovery</value>
      </property>
    
      <property>
        <description>The time in seconds between full compactions of the NM state
        database. Setting the interval to zero disables the full compaction
        cycles.</description>
        <name>yarn.nodemanager.recovery.compaction-interval-secs</name>
        <value>3600</value>
      </property>
    
      <property>
        <description>Whether the nodemanager is running under supervision. A
          nodemanager that supports recovery and is running under supervision
          will not try to cleanup containers as it exits with the assumption
          it will be immediately be restarted and recover containers.</description>
        <name>yarn.nodemanager.recovery.supervised</name>
        <value>false</value>
      </property>
    
      
    
      <property>
        <description>
        Adjustment to the container OS scheduling priority.  In Linux, passed
        directly to the nice command. If unspecified then containers are launched
        without any explicit OS priority.
        </description>
        <name>yarn.nodemanager.container-executor.os.sched.priority.adjustment</name>
      </property>
    
      <property>
        <description>
        Flag to enable container metrics
        </description>
        <name>yarn.nodemanager.container-metrics.enable</name>
        <value>true</value>
      </property>
    
      <property>
        <description>
        Container metrics flush period in ms.  Set to -1 for flush on completion.
        </description>
        <name>yarn.nodemanager.container-metrics.period-ms</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>
        The delay time ms to unregister container metrics after completion.
        </description>
        <name>yarn.nodemanager.container-metrics.unregister-delay-ms</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>
        Class used to calculate current container resource utilization.
        </description>
        <name>yarn.nodemanager.container-monitor.process-tree.class</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Flag to enable NodeManager disk health checker
        </description>
        <name>yarn.nodemanager.disk-health-checker.enable</name>
        <value>true</value>
      </property>
    
      <property>
        <description>
        Number of threads to use in NM log cleanup.  Used when log aggregation
        is disabled.
        </description>
        <name>yarn.nodemanager.log.deletion-threads-count</name>
        <value>4</value>
      </property>
    
      <property>
        <description>
        The Windows group that the windows-container-executor should run as.
        </description>
        <name>yarn.nodemanager.windows-secure-container-executor.group</name>
        <value></value>
      </property>
    
      
    
      <property>
        <name>yarn.nodemanager.aux-services.mapreduce_shuffle.class</name>
        <value>org.apache.hadoop.mapred.ShuffleHandler</value>
      </property>
    
      
    
      <property>
        <description>The kerberos principal for the proxy, if the proxy is not
        running as part of the RM.</description>
        <name>yarn.web-proxy.principal</name>
        <value/>
      </property>
      
      <property>
        <description>Keytab for WebAppProxy, if the proxy is not running as part of 
        the RM.</description>
        <name>yarn.web-proxy.keytab</name>
      </property>
      
      <property>
        <description>The address for the web proxy as HOST:PORT, if this is not
         given then the proxy will run as part of the RM</description>
         <name>yarn.web-proxy.address</name>
         <value/>
      </property>
    
      
    
      <property>
        <description>
          CLASSPATH for YARN applications. A comma-separated list
          of CLASSPATH entries. When this value is empty, the following default
          CLASSPATH for YARN applications would be used. 
          For Linux:
          $HADOOP_CONF_DIR,
          $HADOOP_COMMON_HOME/share/hadoop/common/*,
          $HADOOP_COMMON_HOME/share/hadoop/common/lib/*,
          $HADOOP_HDFS_HOME/share/hadoop/hdfs/*,
          $HADOOP_HDFS_HOME/share/hadoop/hdfs/lib/*,
          $HADOOP_YARN_HOME/share/hadoop/yarn/*,
          $HADOOP_YARN_HOME/share/hadoop/yarn/lib/*
          For Windows:
          %HADOOP_CONF_DIR%,
          %HADOOP_COMMON_HOME%/share/hadoop/common/*,
          %HADOOP_COMMON_HOME%/share/hadoop/common/lib/*,
          %HADOOP_HDFS_HOME%/share/hadoop/hdfs/*,
          %HADOOP_HDFS_HOME%/share/hadoop/hdfs/lib/*,
          %HADOOP_YARN_HOME%/share/hadoop/yarn/*,
          %HADOOP_YARN_HOME%/share/hadoop/yarn/lib/*
        </description>
        <name>yarn.application.classpath</name>
        <value></value>
      </property>
    
      
    
      <property>
        <description>Indicate what is the current version of the running
        timeline service. For example, if "yarn.timeline-service.version" is 1.5,
        and "yarn.timeline-service.enabled" is true, it means the cluster will and
        should bring up the timeline service v.1.5 (and nothing else).
        On the client side, if the client uses the same version of timeline service,
        it should succeed. If the client chooses to use a smaller version in spite of this,
        then depending on how robust the compatibility story is between versions,
        the results may vary.
        </description>
        <name>yarn.timeline-service.version</name>
        <value>1.0f</value>
      </property>
    
      <property>
        <description>
        In the server side it indicates whether timeline service is enabled or not.
        And in the client side, users can enable it to indicate whether client wants
        to use timeline service. If it's enabled in the client side along with
        security, then yarn client tries to fetch the delegation tokens for the
        timeline server.
        </description>
        <name>yarn.timeline-service.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The hostname of the timeline service web application.</description>
        <name>yarn.timeline-service.hostname</name>
        <value>0.0.0.0</value>
      </property>
    
      <property>
        <description>This is default address for the timeline server to start the
        RPC server.</description>
        <name>yarn.timeline-service.address</name>
        <value>${yarn.timeline-service.hostname}:10200</value>
      </property>
    
      <property>
        <description>The http address of the timeline service web application.</description>
        <name>yarn.timeline-service.webapp.address</name>
        <value>${yarn.timeline-service.hostname}:8188</value>
      </property>
    
      <property>
        <description>The https address of the timeline service web application.</description>
        <name>yarn.timeline-service.webapp.https.address</name>
        <value>${yarn.timeline-service.hostname}:8190</value>
      </property>
    
      <property>
        <description>
          The actual address the server will bind to. If this optional address is
          set, the RPC and webapp servers will bind to this address and the port specified in
          yarn.timeline-service.address and yarn.timeline-service.webapp.address, respectively.
          This is most useful for making the service listen to all interfaces by setting to
          0.0.0.0.
        </description>
        <name>yarn.timeline-service.bind-host</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Defines the max number of applications could be fetched using REST API or
          application history protocol and shown in timeline server web ui.
        </description>
        <name>yarn.timeline-service.generic-application-history.max-applications</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>Store class name for timeline store.</description>
        <name>yarn.timeline-service.store-class</name>
        <value>org.apache.hadoop.yarn.server.timeline.LeveldbTimelineStore</value>
      </property>
    
      <property>
        <description>Enable age off of timeline store data.</description>
        <name>yarn.timeline-service.ttl-enable</name>
        <value>true</value>
      </property>
    
      <property>
        <description>Time to live for timeline store data in milliseconds.</description>
        <name>yarn.timeline-service.ttl-ms</name>
        <value>604800000</value>
      </property>
    
      <property>
        <description>Store file name for leveldb timeline store.</description>
        <name>yarn.timeline-service.leveldb-timeline-store.path</name>
        <value>${hadoop.tmp.dir}/yarn/timeline</value>
      </property>
    
      <property>
        <description>Length of time to wait between deletion cycles of leveldb timeline store in milliseconds.</description>
        <name>yarn.timeline-service.leveldb-timeline-store.ttl-interval-ms</name>
        <value>300000</value>
      </property>
    
      <property>
        <description>Size of read cache for uncompressed blocks for leveldb timeline store in bytes.</description>
        <name>yarn.timeline-service.leveldb-timeline-store.read-cache-size</name>
        <value>104857600</value>
      </property>
    
      <property>
        <description>Size of cache for recently read entity start times for leveldb timeline store in number of entities.</description>
        <name>yarn.timeline-service.leveldb-timeline-store.start-time-read-cache-size</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>Size of cache for recently written entity start times for leveldb timeline store in number of entities.</description>
        <name>yarn.timeline-service.leveldb-timeline-store.start-time-write-cache-size</name>
        <value>10000</value>
      </property>
    
      <property>
        <description>Handler thread count to serve the client RPC requests.</description>
        <name>yarn.timeline-service.handler-thread-count</name>
        <value>10</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.http-authentication.type</name>
        <value>simple</value>
        <description>
          Defines authentication used for the timeline server HTTP endpoint.
          Supported values are: simple | kerberos | #AUTHENTICATION_HANDLER_CLASSNAME#
        </description>
      </property>
    
      <property>
        <name>yarn.timeline-service.http-authentication.simple.anonymous.allowed</name>
        <value>true</value>
        <description>
          Indicates if anonymous requests are allowed by the timeline server when using
          'simple' authentication.
        </description>
      </property>
    
      <property>
        <description>The Kerberos principal for the timeline server.</description>
        <name>yarn.timeline-service.principal</name>
        <value></value>
      </property>
    
      <property>
        <description>The Kerberos keytab for the timeline server.</description>
        <name>yarn.timeline-service.keytab</name>
        <value>/etc/krb5.keytab</value>
      </property>
    
      <property>
        <description>Comma separated list of UIs that will be hosted</description>
        <name>yarn.timeline-service.ui-names</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Default maximum number of retries for timeline service client
        and value -1 means no limit.
        </description>
        <name>yarn.timeline-service.client.max-retries</name>
        <value>30</value>
      </property>
    
      <property>
        <description>Client policy for whether timeline operations are non-fatal.
        Should the failure to obtain a delegation token be considered an application
        failure (option = false),  or should the client attempt to continue to
        publish information without it (option=true)</description>
        <name>yarn.timeline-service.client.best-effort</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Default retry time interval for timeline servive client.
        </description>
        <name>yarn.timeline-service.client.retry-interval-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>
        The time period for which timeline v2 client will wait for draining
        leftover entities after stop.
        </description>
        <name>yarn.timeline-service.client.drain-entities.timeout.ms</name>
        <value>2000</value>
      </property>
    
      <property>
        <description>Enable timeline server to recover state after starting. If
        true, then yarn.timeline-service.state-store-class must be specified.
        </description>
        <name>yarn.timeline-service.recovery.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Store class name for timeline state store.</description>
        <name>yarn.timeline-service.state-store-class</name>
        <value>org.apache.hadoop.yarn.server.timeline.recovery.LeveldbTimelineStateStore</value>
      </property>
    
      <property>
        <description>Store file name for leveldb state store.</description>
        <name>yarn.timeline-service.leveldb-state-store.path</name>
        <value>${hadoop.tmp.dir}/yarn/timeline</value>
      </property>
    
      
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.cache-store-class</name>
        <value>org.apache.hadoop.yarn.server.timeline.MemoryTimelineStore</value>
        <description>Caching storage timeline server v1.5 is using. </description>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.active-dir</name>
        <value>/tmp/entity-file-history/active</value>
        <description>HDFS path to store active application’s timeline data</description>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.done-dir</name>
        <value>/tmp/entity-file-history/done/</value>
        <description>HDFS path to store done application’s timeline data</description>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.group-id-plugin-classes</name>
        <value></value>
        <description>
          Plugins that can translate a timeline entity read request into
          a list of timeline entity group ids, separated by commas.
        </description>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.group-id-plugin-classpath</name>
        <value></value>
        <description>
          Classpath for all plugins defined in
          yarn.timeline-service.entity-group-fs-store.group-id-plugin-classes.
        </description>
      </property>
    
       <property>
         <name>yarn.timeline-service.entity-group-fs-store.summary-store</name>
         <description>Summary storage for ATS v1.5</description>
         <value>org.apache.hadoop.yarn.server.timeline.LeveldbTimelineStore</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.scan-interval-seconds</name>
        <description>
          Scan interval for ATS v1.5 entity group file system storage reader.This
          value controls how frequent the reader will scan the HDFS active directory
          for application status.
        </description>
        <value>60</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.cleaner-interval-seconds</name>
        <description>
          Scan interval for ATS v1.5 entity group file system storage cleaner.This
          value controls how frequent the reader will scan the HDFS done directory
          for stale application data.
        </description>
        <value>3600</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.retain-seconds</name>
        <description>
          How long the ATS v1.5 entity group file system storage will keep an
          application's data in the done directory.
        </description>
        <value>604800</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.leveldb-cache-read-cache-size</name>
        <description>
          Read cache size for the leveldb cache storage in ATS v1.5 plugin storage.
        </description>
        <value>10485760</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.entity-group-fs-store.app-cache-size</name>
        <description>
          Size of the reader cache for ATS v1.5 reader. This value controls how many
          entity groups the ATS v1.5 server should cache. If the number of active
          read entity groups is greater than the number of caches items, some reads
          may return empty data. This value must be greater than 0.
        </description>
        <value>10</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.client.fd-flush-interval-secs</name>
        <description>
          Flush interval for ATS v1.5 writer. This value controls how frequent
          the writer will flush the HDFS FSStream for the entity/domain.
        </description>
        <value>10</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.client.fd-clean-interval-secs</name>
        <description>
          Scan interval for ATS v1.5 writer. This value controls how frequent
          the writer will scan the HDFS FSStream for the entity/domain.
          If the FSStream is stale for a long time, this FSStream will be close.
        </description>
        <value>60</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.client.fd-retain-secs</name>
        <description>
          How long the ATS v1.5 writer will keep an FSStream open.
          If this fsstream does not write anything for this configured time,
          it will be close.
        </description>
        <value>300</value>
      </property>
    
      
      <property>
        <name>yarn.timeline-service.writer.class</name>
        <description>
          Storage implementation ATS v2 will use for the TimelineWriter service.
        </description>
        <value>org.apache.hadoop.yarn.server.timelineservice.storage.HBaseTimelineWriterImpl</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.reader.class</name>
        <description>
          Storage implementation ATS v2 will use for the TimelineReader service.
        </description>
        <value>org.apache.hadoop.yarn.server.timelineservice.storage.HBaseTimelineReaderImpl</value>
      </property>
    
      <property>
        <name>yarn.timeline-service.client.internal-timers-ttl-secs</name>
        <description>
          How long the internal Timer Tasks can be alive in writer. If there is no
          write operation for this configured time, the internal timer tasks will
          be close.
        </description>
        <value>420</value>
      </property>
    
      <property>
        <description>The setting that controls how often the timeline collector
        flushes the timeline writer.</description>
        <name>yarn.timeline-service.writer.flush-interval-seconds</name>
        <value>60</value>
      </property>
    
      <property>
        <description>Time period till which the application collector will be alive
         in NM, after the  application master container finishes.</description>
        <name>yarn.timeline-service.app-collector.linger-period.ms</name>
        <value>60000</value>
      </property>
    
      <property>
        <description>Time line V2 client tries to merge these many number of
        async entities (if available) and then call the REST ATS V2 API to submit.
        </description>
        <name>yarn.timeline-service.timeline-client.number-of-async-entities-to-merge</name>
        <value>10</value>
      </property>
    
      <property>
        <description>
        The setting that controls how long the final value
        of a metric of a completed app is retained before merging into
        the flow sum. Up to this time after an application is completed
        out-of-order values that arrive can be recognized and discarded at the
        cost of increased storage.
        </description>
        <name>yarn.timeline-service.hbase.coprocessor.app-final-value-retention-milliseconds
        </name>
        <value>259200000</value>
      </property>
    
      <property>
        <description>
        The default hdfs location for flowrun coprocessor jar.
        </description>
        <name>yarn.timeline-service.hbase.coprocessor.jar.hdfs.location
        </name>
        <value>/hbase/coprocessor/hadoop-yarn-server-timelineservice.jar</value>
      </property>
    
      <property>
        <description>
        The value of this parameter sets the prefix for all tables that are part of
        timeline service in the hbase storage schema. It can be set to "dev."
        or "staging." if it is to be used for development or staging instances.
        This way the data in production tables stays in a separate set of tables
        prefixed by "prod.".
        </description>
        <name>yarn.timeline-service.hbase-schema.prefix</name>
        <value>prod.</value>
      </property>
    
      <property>
        <description> Optional URL to an hbase-site.xml configuration file to be
        used to connect to the timeline-service hbase cluster. If empty or not
        specified, then the HBase configuration will be loaded from the classpath.
        When specified the values in the specified configuration file will override
        those from the ones that are present on the classpath.
        </description>
        <name>yarn.timeline-service.hbase.configuration.file
        </name>
        <value></value>
      </property>
    
      
    
      <property>
        <description>Whether the shared cache is enabled</description>
        <name>yarn.sharedcache.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>The root directory for the shared cache</description>
        <name>yarn.sharedcache.root-dir</name>
        <value>/sharedcache</value>
      </property>
    
      <property>
        <description>The level of nested directories before getting to the checksum
        directories. It must be non-negative.</description>
        <name>yarn.sharedcache.nested-level</name>
        <value>3</value>
      </property>
    
      <property>
        <description>The implementation to be used for the SCM store</description>
        <name>yarn.sharedcache.store.class</name>
        <value>org.apache.hadoop.yarn.server.sharedcachemanager.store.InMemorySCMStore</value>
      </property>
    
      <property>
        <description>The implementation to be used for the SCM app-checker</description>
        <name>yarn.sharedcache.app-checker.class</name>
        <value>org.apache.hadoop.yarn.server.sharedcachemanager.RemoteAppChecker</value>
      </property>
      
      <property>
        <description>A resource in the in-memory store is considered stale
        if the time since the last reference exceeds the staleness period.
        This value is specified in minutes.</description>
        <name>yarn.sharedcache.store.in-memory.staleness-period-mins</name>
        <value>10080</value>
      </property>
      
      <property>
        <description>Initial delay before the in-memory store runs its first check
        to remove dead initial applications. Specified in minutes.</description>
        <name>yarn.sharedcache.store.in-memory.initial-delay-mins</name>
        <value>10</value>
      </property>
      
      <property>
        <description>The frequency at which the in-memory store checks to remove
        dead initial applications. Specified in minutes.</description>
        <name>yarn.sharedcache.store.in-memory.check-period-mins</name>
        <value>720</value>
      </property>
      
      <property>
        <description>The address of the admin interface in the SCM (shared cache manager)</description>
        <name>yarn.sharedcache.admin.address</name>
        <value>0.0.0.0:8047</value>
      </property>
    
      <property>
        <description>The number of threads used to handle SCM admin interface (1 by default)</description>
        <name>yarn.sharedcache.admin.thread-count</name>
        <value>1</value>
      </property>
    
      <property>
        <description>The address of the web application in the SCM (shared cache manager)</description>
        <name>yarn.sharedcache.webapp.address</name>
        <value>0.0.0.0:8788</value>
      </property>
    
      <property>
        <description>The frequency at which a cleaner task runs.
        Specified in minutes.</description>
        <name>yarn.sharedcache.cleaner.period-mins</name>
        <value>1440</value>
      </property>
    
      <property>
        <description>Initial delay before the first cleaner task is scheduled.
        Specified in minutes.</description>
        <name>yarn.sharedcache.cleaner.initial-delay-mins</name>
        <value>10</value>
      </property>
    
      <property>
        <description>The time to sleep between processing each shared cache
        resource. Specified in milliseconds.</description>
        <name>yarn.sharedcache.cleaner.resource-sleep-ms</name>
        <value>0</value>
      </property>
    
      <property>
        <description>The address of the node manager interface in the SCM
        (shared cache manager)</description>
        <name>yarn.sharedcache.uploader.server.address</name>
        <value>0.0.0.0:8046</value>
      </property>
    
      <property>
        <description>The number of threads used to handle shared cache manager
        requests from the node manager (50 by default)</description>
        <name>yarn.sharedcache.uploader.server.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>The address of the client interface in the SCM
        (shared cache manager)</description>
        <name>yarn.sharedcache.client-server.address</name>
        <value>0.0.0.0:8045</value>
      </property>
    
      <property>
        <description>The number of threads used to handle shared cache manager
        requests from clients (50 by default)</description>
        <name>yarn.sharedcache.client-server.thread-count</name>
        <value>50</value>
      </property>
    
      <property>
        <description>The algorithm used to compute checksums of files (SHA-256 by
        default)</description>
        <name>yarn.sharedcache.checksum.algo.impl</name>
        <value>org.apache.hadoop.yarn.sharedcache.ChecksumSHA256Impl</value>
      </property>
    
      <property>
        <description>The replication factor for the node manager uploader for the
        shared cache (10 by default)</description>
        <name>yarn.sharedcache.nm.uploader.replication.factor</name>
        <value>10</value>
      </property>
    
      <property>
        <description>The number of threads used to upload files from a node manager
        instance (20 by default)</description>
        <name>yarn.sharedcache.nm.uploader.thread-count</name>
        <value>20</value>
      </property>
    
      <property>
        <description>
        ACL protocol for use in the Timeline server.
        </description>
        <name>security.applicationhistory.protocol.acl</name>
        <value></value>
      </property>
    
      
    
      <property>
        <description>
        Set to true for MiniYARNCluster unit tests
        </description>
        <name>yarn.is.minicluster</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Set for MiniYARNCluster unit tests to control resource monitoring
        </description>
        <name>yarn.minicluster.control-resource-monitoring</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Set to false in order to allow MiniYARNCluster to run tests without
        port conflicts.
        </description>
        <name>yarn.minicluster.fixed.ports</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Set to false in order to allow the NodeManager in MiniYARNCluster to
        use RPC to talk to the RM.
        </description>
        <name>yarn.minicluster.use-rpc</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        As yarn.nodemanager.resource.memory-mb property but for the NodeManager
        in a MiniYARNCluster.
        </description>
        <name>yarn.minicluster.yarn.nodemanager.resource.memory-mb</name>
        <value>4096</value>
      </property>
    
      
    
      <property>
        <description>
        Enable node labels feature
        </description>
        <name>yarn.node-labels.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        URI for NodeLabelManager.  The default value is
        /tmp/hadoop-yarn-${user}/node-labels/ in the local filesystem.
        </description>
        <name>yarn.node-labels.fs-store.root-dir</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Set configuration type for node labels. Administrators can specify
        "centralized", "delegated-centralized" or "distributed".
        </description>
        <name>yarn.node-labels.configuration-type</name>
        <value>centralized</value>
      </property>
    
      
      <property>
        <description>
        When "yarn.node-labels.configuration-type" is configured with "distributed"
        in RM, Administrators can configure in NM the provider for the
        node labels by configuring this parameter. Administrators can
        configure "config", "script" or the class name of the provider. Configured
        class needs to extend
        org.apache.hadoop.yarn.server.nodemanager.nodelabels.NodeLabelsProvider.
        If "config" is configured, then "ConfigurationNodeLabelsProvider" and if
        "script" is configured, then "ScriptNodeLabelsProvider" will be used.
        </description>
        <name>yarn.nodemanager.node-labels.provider</name>
      </property>
    
      <property>
        <description>
        When "yarn.nodemanager.node-labels.provider" is configured with "config",
        "Script" or the configured class extends AbstractNodeLabelsProvider, then
        periodically node labels are retrieved from the node labels provider. This
        configuration is to define the interval period.
        If -1 is configured then node labels are retrieved from provider only
        during initialization. Defaults to 10 mins.
        </description>
        <name>yarn.nodemanager.node-labels.provider.fetch-interval-ms</name>
        <value>600000</value>
      </property>
    
      <property>
        <description>
       Interval at which NM syncs its node labels with RM. NM will send its loaded
       labels every x intervals configured, along with heartbeat to RM.
        </description>
        <name>yarn.nodemanager.node-labels.resync-interval-ms</name>
        <value>120000</value>
      </property>
    
      <property>
        <description>
        When "yarn.nodemanager.node-labels.provider" is configured with "config"
        then ConfigurationNodeLabelsProvider fetches the partition label from this
        parameter.
        </description>
        <name>yarn.nodemanager.node-labels.provider.configured-node-partition</name>
      </property>
    
      <property>
        <description>
        When "yarn.nodemanager.node-labels.provider" is configured with "Script"
        then this configuration provides the timeout period after which it will
        interrupt the script which queries the Node labels. Defaults to 20 mins.
        </description>
        <name>yarn.nodemanager.node-labels.provider.fetch-timeout-ms</name>
        <value>1200000</value>
      </property>
    
      
      <property>
        <description>
        When node labels "yarn.node-labels.configuration-type" is
        of type "delegated-centralized", administrators should configure
        the class for fetching node labels by ResourceManager. Configured
        class needs to extend
        org.apache.hadoop.yarn.server.resourcemanager.nodelabels.
        RMNodeLabelsMappingProvider.
        </description>
        <name>yarn.resourcemanager.node-labels.provider</name>
        <value></value>
      </property>
    
      <property>
        <description>
        When "yarn.node-labels.configuration-type" is configured with
        "delegated-centralized", then periodically node labels are retrieved
        from the node labels provider. This configuration is to define the
        interval. If -1 is configured then node labels are retrieved from
        provider only once for each node after it registers. Defaults to 30 mins.
        </description>
        <name>yarn.resourcemanager.node-labels.provider.fetch-interval-ms</name>
        <value>1800000</value>
      </property>
    
      <property>
        <description>
        Timeout in seconds for YARN node graceful decommission.
        This is the maximal time to wait for running containers and applications to complete
        before transition a DECOMMISSIONING node into DECOMMISSIONED.
        </description>
        <name>yarn.resourcemanager.nodemanager-graceful-decommission-timeout-secs</name>
        <value>3600</value>
      </property>
    
      <property>
        <description>
        Timeout in seconds of DecommissioningNodesWatcher internal polling.
        </description>
        <name>yarn.resourcemanager.decommissioning-nodes-watcher.poll-interval-secs</name>
        <value>20</value>
      </property>
    
      <property>
        <description>The Node Label script to run. Script output Line starting with
         "NODE_PARTITION:" will be considered as Node Label Partition. In case of
         multiple lines have this pattern, then last one will be considered
        </description>
        <name>yarn.nodemanager.node-labels.provider.script.path</name>
      </property>
    
      <property>
        <description>The arguments to pass to the Node label script.</description>
        <name>yarn.nodemanager.node-labels.provider.script.opts</name>
      </property>
    
      
      <property>
        <description>
          Flag to indicate whether the RM is participating in Federation or not.
        </description>
        <name>yarn.federation.enabled</name>
        <value>false</value>
      </property>
      <property>
        <description>
          Machine list file to be loaded by the FederationSubCluster Resolver
        </description>
        <name>yarn.federation.machine-list</name>
      </property>
      <property>
        <description>
          Class name for SubClusterResolver
        </description>
        <name>yarn.federation.subcluster-resolver.class</name>
        <value>org.apache.hadoop.yarn.server.federation.resolver.DefaultSubClusterResolverImpl</value>
      </property>
    
      <property>
        <description>
          Store class name for federation state store
        </description>
        <name>yarn.federation.state-store.class</name>
        <value>org.apache.hadoop.yarn.server.federation.store.impl.MemoryFederationStateStore</value>
      </property>
    
      <property>
       <description>
        The time in seconds after which the federation state store local cache
        will be refreshed periodically
       </description>
       <name>yarn.federation.cache-ttl.secs</name>
       <value>300</value>
      </property>
    
      <property>
        <description>The registry base directory for federation.</description>
        <name>yarn.federation.registry.base-dir</name>
        <value>yarnfederation/</value>
      </property>
    
      
    
      <property>
        <description>The registry implementation to use.</description>
        <name>yarn.registry.class</name>
        <value>org.apache.hadoop.registry.client.impl.FSRegistryOperationsService</value>
      </property>
    
      <property>
        <description>The interval that the yarn client library uses to poll the
        completion status of the asynchronous API of application client protocol.
        </description>
        <name>yarn.client.application-client-protocol.poll-interval-ms</name>
        <value>200</value>
      </property>
    
      <property>
        <description>
        The duration (in ms) the YARN client waits for an expected state change
        to occur.  -1 means unlimited wait time.
        </description>
        <name>yarn.client.application-client-protocol.poll-timeout-ms</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>RSS usage of a process computed via
        /proc/pid/stat is not very accurate as it includes shared pages of a
        process. /proc/pid/smaps provides useful information like
        Private_Dirty, Private_Clean, Shared_Dirty, Shared_Clean which can be used
        for computing more accurate RSS. When this flag is enabled, RSS is computed
        as Min(Shared_Dirty, Pss) + Private_Clean + Private_Dirty. It excludes
        read-only shared mappings in RSS computation.  
        </description>
        <name>yarn.nodemanager.container-monitor.procfs-tree.smaps-based-rss.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        URL for log aggregation server
        </description>
        <name>yarn.log.server.url</name>
        <value></value>
      </property>
    
      <property>
        <description>
        URL for log aggregation server web service
        </description>
        <name>yarn.log.server.web-service.url</name>
        <value></value>
      </property>
    
      <property>
        <description>
        RM Application Tracking URL
        </description>
        <name>yarn.tracking.url.generator</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Class to be used for YarnAuthorizationProvider
        </description>
        <name>yarn.authorization-provider</name>
        <value></value>
      </property>
    
      <property>
        <description>Defines how often NMs wake up to upload log files.
        The default value is -1. By default, the logs will be uploaded when
        the application is finished. By setting this configure, logs can be uploaded
        periodically when the application is running. The minimum rolling-interval-seconds
        can be set is 3600.
        </description>
        <name>yarn.nodemanager.log-aggregation.roll-monitoring-interval-seconds</name>
        <value>-1</value>
      </property>
    
      <property>
        <description>Define how many aggregated log files per application per NM
        we can have in remote file system. By default, the total number of
        aggregated log files per application per NM is 30.
        </description>
        <name>yarn.nodemanager.log-aggregation.num-log-files-per-app</name>
        <value>30</value>
      </property>
    
      <property>
        <description>
        Enable/disable intermediate-data encryption at YARN level. For now,
        this only is used by the FileSystemRMStateStore to setup right
        file-system security attributes.
        </description>
        <name>yarn.intermediate-data-encryption.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>Flag to enable cross-origin (CORS) support in the NM. This flag
        requires the CORS filter initializer to be added to the filter initializers
        list in core-site.xml.</description>
        <name>yarn.nodemanager.webapp.cross-origin.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Defines maximum application priority in a cluster.
        If an application is submitted with a priority higher than this value, it will be
        reset to this maximum value.
        </description>
        <name>yarn.cluster.max-application-priority</name>
        <value>0</value>
      </property>
    
      <property>
        <description>
        The default log aggregation policy class. Applications can
        override it via LogAggregationContext. This configuration can provide
        some cluster-side default behavior so that if the application doesn't
        specify any policy via LogAggregationContext administrators of the cluster
        can adjust the policy globally.
        </description>
        <name>yarn.nodemanager.log-aggregation.policy.class</name>
        <value>org.apache.hadoop.yarn.server.nodemanager.containermanager.logaggregation.AllContainerLogAggregationPolicy</value>
      </property>
    
      <property>
        <description>
        The default parameters for the log aggregation policy. Applications can
        override it via LogAggregationContext. This configuration can provide
        some cluster-side default behavior so that if the application doesn't
        specify any policy via LogAggregationContext administrators of the cluster
        can adjust the policy globally.
        </description>
        <name>yarn.nodemanager.log-aggregation.policy.parameters</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Enable/Disable AMRMProxyService in the node manager. This service is used to
        intercept calls from the application masters to the resource manager.
        </description>
        <name>yarn.nodemanager.amrmproxy.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        The address of the AMRMProxyService listener.
        </description>
        <name>yarn.nodemanager.amrmproxy.address</name>
        <value>0.0.0.0:8049</value>
      </property>
    
      <property>
        <description>
        The number of threads used to handle requests by the AMRMProxyService.
        </description>
        <name>yarn.nodemanager.amrmproxy.client.thread-count</name>
        <value>25</value>
      </property>
    
      <property>
        <description>
        The comma separated list of class names that implement the
        RequestInterceptor interface. This is used by the AMRMProxyService to create
        the request processing pipeline for applications.
        </description>
        <name>yarn.nodemanager.amrmproxy.interceptor-class.pipeline</name>
        <value>org.apache.hadoop.yarn.server.nodemanager.amrmproxy.DefaultRequestInterceptor</value>
      </property>
    
      <property>
        <description>
        Whether AMRMProxy HA is enabled.
        </description>
        <name>yarn.nodemanager.amrmproxy.ha.enable</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Setting that controls whether distributed scheduling is enabled.
        </description>
        <name>yarn.nodemanager.distributed-scheduling.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          Setting that controls whether opportunistic container allocation
          is enabled.
        </description>
        <name>yarn.resourcemanager.opportunistic-container-allocation.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Number of nodes to be used by the Opportunistic Container Allocator for
        dispatching containers during container allocation.
        </description>
        <name>yarn.resourcemanager.opportunistic-container-allocation.nodes-used</name>
        <value>10</value>
      </property>
    
      <property>
        <description>
        Frequency for computing least loaded NMs.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.sorting-nodes-interval-ms</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>
        Comparator for determining node load for Distributed Scheduling.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.load-comparator</name>
        <value>QUEUE_LENGTH</value>
      </property>
    
      <property>
        <description>
        Value of standard deviation used for calculation of queue limit thresholds.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.queue-limit-stdev</name>
        <value>1.0f</value>
      </property>
    
      <property>
        <description>
        Min length of container queue at NodeManager.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.min-queue-length</name>
        <value>5</value>
      </property>
    
      <property>
        <description>
        Max length of container queue at NodeManager.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.max-queue-length</name>
        <value>15</value>
      </property>
    
      <property>
        <description>
        Min queue wait time for a container at a NodeManager.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.min-queue-wait-time-ms</name>
        <value>10</value>
      </property>
    
      <property>
        <description>
        Max queue wait time for a container queue at a NodeManager.
        </description>
        <name>yarn.resourcemanager.nm-container-queuing.max-queue-wait-time-ms</name>
        <value>100</value>
      </property>
    
      <property>
        <description>
        Use container pause as the preemption policy over kill in the container
        queue at a NodeManager.
        </description>
        <name>yarn.nodemanager.opportunistic-containers-use-pause-for-preemption</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Error filename pattern, to identify the file in the container's
        Log directory which contain the container's error log. As error file
        redirection is done by client/AM and yarn will not be aware of the error
        file name. YARN uses this pattern to identify the error file and tail
        the error log as diagnostics when the container execution returns non zero
        value. Filename patterns are case sensitive and should match the
        specifications of FileSystem.globStatus(Path) api. If multiple filenames
        matches the pattern, first file matching the pattern will be picked.
        </description>
        <name>yarn.nodemanager.container.stderr.pattern</name>
        <value>{*stderr*,*STDERR*}</value>
      </property>
    
      <property>
        <description>
        Size of the container error file which needs to be tailed, in bytes.
        </description>
        <name>yarn.nodemanager.container.stderr.tail.bytes </name>
        <value>4096</value>
      </property>
    
      <property>
        <description>
        Choose different implementation of node label's storage
        </description>
        <name>yarn.node-labels.fs-store.impl.class</name>
        <value>org.apache.hadoop.yarn.nodelabels.FileSystemNodeLabelsStore</value>
      </property>
    
      <property>
        <description>
          Enable the CSRF filter for the RM web app
        </description>
        <name>yarn.resourcemanager.webapp.rest-csrf.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the custom header name to use for CSRF
          protection.
        </description>
        <name>yarn.resourcemanager.webapp.rest-csrf.custom-header</name>
        <value>X-XSRF-Header</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the list of HTTP methods that do not
          require CSRF protection
        </description>
        <name>yarn.resourcemanager.webapp.rest-csrf.methods-to-ignore</name>
        <value>GET,OPTIONS,HEAD</value>
      </property>
    
      <property>
        <description>
          Enable the CSRF filter for the NM web app
        </description>
        <name>yarn.nodemanager.webapp.rest-csrf.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the custom header name to use for CSRF
          protection.
        </description>
        <name>yarn.nodemanager.webapp.rest-csrf.custom-header</name>
        <value>X-XSRF-Header</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the list of HTTP methods that do not
          require CSRF protection
        </description>
        <name>yarn.nodemanager.webapp.rest-csrf.methods-to-ignore</name>
        <value>GET,OPTIONS,HEAD</value>
      </property>
    
      <property>
        <description>
          The name of disk validator.
        </description>
        <name>yarn.nodemanager.disk-validator</name>
        <value>basic</value>
      </property>
    
      <property>
      <description>
          Enable the CSRF filter for the timeline service web app
        </description>
        <name>yarn.timeline-service.webapp.rest-csrf.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the custom header name to use for CSRF
          protection.
        </description>
        <name>yarn.timeline-service.webapp.rest-csrf.custom-header</name>
        <value>X-XSRF-Header</value>
      </property>
    
      <property>
        <description>
          Optional parameter that indicates the list of HTTP methods that do not
          require CSRF protection
        </description>
        <name>yarn.timeline-service.webapp.rest-csrf.methods-to-ignore</name>
        <value>GET,OPTIONS,HEAD</value>
      </property>
    
      <property>
        <description>
          Enable the XFS filter for YARN
        </description>
        <name>yarn.webapp.xfs-filter.enabled</name>
        <value>true</value>
      </property>
    
      <property>
        <description>
          Property specifying the xframe options value.
        </description>
        <name>yarn.resourcemanager.webapp.xfs-filter.xframe-options</name>
        <value>SAMEORIGIN</value>
      </property>
    
      <property>
        <description>
          Property specifying the xframe options value.
        </description>
        <name>yarn.nodemanager.webapp.xfs-filter.xframe-options</name>
        <value>SAMEORIGIN</value>
      </property>
    
      <property>
        <description>
          Property specifying the xframe options value.
        </description>
        <name>yarn.timeline-service.webapp.xfs-filter.xframe-options</name>
        <value>SAMEORIGIN</value>
      </property>
    
      <property>
        <description>
        The least amount of time(msec.) an inactive (decommissioned or shutdown) node can
        stay in the nodes list of the resourcemanager after being declared untracked.
        A node is marked untracked if and only if it is absent from both include and
        exclude nodemanager lists on the RM. All inactive nodes are checked twice per
        timeout interval or every 10 minutes, whichever is lesser, and marked appropriately.
        The same is done when refreshNodes command (graceful or otherwise) is invoked.
        </description>
        <name>yarn.resourcemanager.node-removal-untracked.timeout-ms</name>
        <value>60000</value>
      </property>
    
      <property>
        <description>
        The RMAppLifetimeMonitor Service uses this value as monitor interval
        </description>
        <name>yarn.resourcemanager.application-timeouts.monitor.interval-ms</name>
        <value>3000</value>
      </property>
    
      <property>
        <description>
          Defines the limit of the diagnostics message of an application
          attempt, in kilo characters (character count * 1024).
          When using ZooKeeper to store application state behavior, it's
          important to limit the size of the diagnostic messages to
          prevent YARN from overwhelming ZooKeeper. In cases where
          yarn.resourcemanager.state-store.max-completed-applications is set to
          a large number, it may be desirable to reduce the value of this property
          to limit the total data stored.
        </description>
        <name>yarn.app.attempt.diagnostics.limit.kc</name>
        <value>64</value>
      </property>
    
      <property>
        <description>
          Flag to enable cross-origin (CORS) support for timeline service v1.x or
          Timeline Reader in timeline service v2. For timeline service v2, also add
          org.apache.hadoop.security.HttpCrossOriginFilterInitializer to the
          configuration hadoop.http.filter.initializers in core-site.xml.
        </description>
        <name>yarn.timeline-service.http-cross-origin.enabled</name>
        <value>false</value>
      </property>
     
      <property>
        <description>
          Flag to enable cross-origin (CORS) support for timeline service v1.x or
          Timeline Reader in timeline service v2. For timeline service v2, also add
          org.apache.hadoop.security.HttpCrossOriginFilterInitializer to the
          configuration hadoop.http.filter.initializers in core-site.xml.
        </description>
        <name>yarn.timeline-service.http-cross-origin.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          The comma separated list of class names that implement the
          RequestInterceptor interface. This is used by the RouterClientRMService
          to create the request processing pipeline for users.
        </description>
        <name>yarn.router.clientrm.interceptor-class.pipeline</name>
        <value>org.apache.hadoop.yarn.server.router.clientrm.DefaultClientRequestInterceptor</value>
      </property>
    
      <property>
        <description>
          Size of LRU cache for Router ClientRM Service and RMAdmin Service.
        </description>
        <name>yarn.router.pipeline.cache-max-size</name>
        <value>25</value>
      </property>
    
      <property>
        <description>
          The comma separated list of class names that implement the
          RequestInterceptor interface. This is used by the RouterRMAdminService
          to create the request processing pipeline for users.
        </description>
        <name>yarn.router.rmadmin.interceptor-class.pipeline</name>
        <value>org.apache.hadoop.yarn.server.router.rmadmin.DefaultRMAdminRequestInterceptor</value>
      </property>
    
      <property>
        <description>
          The actual address the server will bind to. If this optional address is
          set, the RPC and webapp servers will bind to this address and the port specified in
          yarn.router.address and yarn.router.webapp.address, respectively. This is
          most useful for making Router listen to all interfaces by setting to 0.0.0.0.
        </description>
        <name>yarn.router.bind-host</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Comma-separated list of PlacementRules to determine how applications
          submitted by certain users get mapped to certain queues. Default is
          user-group, which corresponds to UserGroupMappingPlacementRule.
        </description>
        <name>yarn.scheduler.queue-placement-rules</name>
        <value>user-group</value>
      </property>
    
      <property>
        <description>
          The comma separated list of class names that implement the
          RequestInterceptor interface. This is used by the RouterWebServices
          to create the request processing pipeline for users.
        </description>
        <name>yarn.router.webapp.interceptor-class.pipeline</name>
        <value>org.apache.hadoop.yarn.server.router.webapp.DefaultRequestInterceptorREST</value>
      </property>
    
      <property>
        <description>
          The http address of the Router web application.
          If only a host is provided as the value,
          the webapp will be served on a random port.
        </description>
        <name>yarn.router.webapp.address</name>
        <value>0.0.0.0:8089</value>
      </property>
    
      <property>
        <description>
          The https address of the Router web application.
          If only a host is provided as the value,
          the webapp will be served on a random port.
        </description>
        <name> yarn.router.webapp.https.address</name>
        <value>0.0.0.0:8091</value>
      </property>
    
      <property>
        <description>
           It is TimelineClient 1.5 configuration whether to store active
           application’s timeline data with in user directory i.e
           ${yarn.timeline-service.entity-group-fs-store.active-dir}/${user.name}
        </description>
        <name>yarn.timeline-service.entity-group-fs-store.with-user-dir</name>
        <value>false</value>
      </property>
    
      
      <property>
        <name>yarn.resource-types</name>
        <value></value>
        <description>
        The resource types to be used for scheduling. Use resource-types.xml
        to specify details about the individual resource types.
        </description>
      </property>
     
      <property>
        <name>yarn.webapp.filter-entity-list-by-user</name>
        <value>false</value>
          <description>
            Flag to enable display of applications per user as an admin
            configuration.
          </description>
      </property>
    
      <property>
        <description>
          The type of configuration store to use for scheduler configurations.
          Default is "file", which uses file based capacity-scheduler.xml to
          retrieve and change scheduler configuration. To enable API based
          scheduler configuration, use either "memory" (in memory storage, no
          persistence across restarts), "leveldb" (leveldb based storage), or
          "zk" (zookeeper based storage). API based configuration is only useful
          when using a scheduler which supports mutable configuration. Currently
          only capacity scheduler supports this.
        </description>
        <name>yarn.scheduler.configuration.store.class</name>
        <value>file</value>
      </property>
    
      <property>
        <description>
          The class to use for configuration mutation ACL policy if using a mutable
          configuration provider. Controls whether a mutation request is allowed.
          The DefaultConfigurationMutationACLPolicy checks if the requestor is a
          YARN admin.
        </description>
        <name>yarn.scheduler.configuration.mutation.acl-policy.class</name>
        <value>org.apache.hadoop.yarn.server.resourcemanager.scheduler.DefaultConfigurationMutationACLPolicy</value>
      </property>
    
      <property>
        <description>
          The storage path for LevelDB implementation of configuration store,
          when yarn.scheduler.configuration.store.class is configured to be
          "leveldb".
        </description>
        <name>yarn.scheduler.configuration.leveldb-store.path</name>
        <value>${hadoop.tmp.dir}/yarn/system/confstore</value>
      </property>
    
      <property>
        <description>
          The compaction interval for LevelDB configuration store in secs,
          when yarn.scheduler.configuration.store.class is configured to be
          "leveldb". Default is one day.
        </description>
        <name>yarn.scheduler.configuration.leveldb-store.compaction-interval-secs</name>
        <value>86400</value>
      </property>
    
      <property>
        <description>
          The max number of configuration change log entries kept in config
          store, when yarn.scheduler.configuration.store.class is configured to be
          "leveldb" or "zk". Default is 1000 for either.
        </description>
        <name>yarn.scheduler.configuration.store.max-logs</name>
        <value>1000</value>
      </property>
    
      <property>
        <description>
          ZK root node path for configuration store when using zookeeper-based
          configuration store.
        </description>
        <name>yarn.scheduler.configuration.zk-store.parent-path</name>
        <value>/confstore</value>
      </property>
    
      <property>
        <description>
          Provides an option for client to load supported resource types from RM
          instead of depending on local resource-types.xml file.
        </description>
        <name>yarn.client.load.resource-types.from-server</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
          When yarn.nodemanager.resource.gpu.allowed-gpu-devices=auto specified,
          YARN NodeManager needs to run GPU discovery binary (now only support
          nvidia-smi) to get GPU-related information.
          When value is empty (default), YARN NodeManager will try to locate
          discovery executable itself.
          An example of the config value is: /usr/local/bin/nvidia-smi
        </description>
        <name>yarn.nodemanager.resource-plugins.gpu.path-to-discovery-executables</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Enable additional discovery/isolation of resources on the NodeManager,
          split by comma. By default, this is empty.
          Acceptable values: { "yarn-io/gpu", "yarn-io/fpga"}.
        </description>
        <name>yarn.nodemanager.resource-plugins</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Specify GPU devices which can be managed by YARN NodeManager, split by comma
          Number of GPU devices will be reported to RM to make scheduling decisions.
          Set to auto (default) let YARN automatically discover GPU resource from
          system.
    
          Manually specify GPU devices if auto detect GPU device failed or admin
          only want subset of GPU devices managed by YARN. GPU device is identified
          by their minor device number and index. A common approach to get minor
          device number of GPUs is using "nvidia-smi -q" and search "Minor Number"
          output.
    
          When manual specify minor numbers, admin needs to include indice of GPUs
          as well, format is index:minor_number[,index:minor_number...]. An example
          of manual specification is "0:0,1:1,2:2,3:4" to allow YARN NodeManager to
          manage GPU devices with indice 0/1/2/3 and minor number 0/1/2/4.
          numbers .
        </description>
        <name>yarn.nodemanager.resource-plugins.gpu.allowed-gpu-devices</name>
        <value>auto</value>
      </property>
    
      <property>
        <description>
          Specify docker command plugin for GPU. By default uses Nvidia docker V1.
        </description>
        <name>yarn.nodemanager.resource-plugins.gpu.docker-plugin</name>
        <value>nvidia-docker-v1</value>
      </property>
    
      <property>
        <description>
          Specify end point of nvidia-docker-plugin.
          Please find documentation: https://github.com/NVIDIA/nvidia-docker/wiki
          For more details.
        </description>
        <name>yarn.nodemanager.resource-plugins.gpu.docker-plugin.nvidia-docker-v1.endpoint</name>
        <value>http://localhost:3476/v1.0/docker/cli</value>
      </property>
    
      <property>
        <description>
          Specify one vendor plugin to handle FPGA devices discovery/IP download/configure.
          Only IntelFpgaOpenclPlugin is supported by default.
          We only allow one NM configured with one vendor FPGA plugin now since the end user can put the same
          vendor's cards in one host. And this also simplify our design.
        </description>
        <name>yarn.nodemanager.resource-plugins.fpga.vendor-plugin.class</name>
        <value>org.apache.hadoop.yarn.server.nodemanager.containermanager.resourceplugin.fpga.IntelFpgaOpenclPlugin</value>
      </property>
    
      <property>
        <description>
          When yarn.nodemanager.resource.fpga.allowed-fpga-devices=auto specified,
          YARN NodeManager needs to run FPGA discovery binary (now only support
          IntelFpgaOpenclPlugin) to get FPGA information.
          When value is empty (default), YARN NodeManager will try to locate
          discovery executable from vendor plugin's preference
        </description>
        <name>yarn.nodemanager.resource-plugins.fpga.path-to-discovery-executables</name>
        <value></value>
      </property>
    
      <property>
        <description>
          Specify FPGA devices which can be managed by YARN NodeManager, split by comma
          Number of FPGA devices will be reported to RM to make scheduling decisions.
          Set to auto (default) let YARN automatically discover FPGA resource from
          system.
    
          Manually specify FPGA devices if admin only want subset of FPGA devices managed by YARN.
          At present, since we can only configure one major number in c-e.cfg, FPGA device is
          identified by their minor device number. A common approach to get minor
          device number of FPGA is using "aocl diagnose" and check uevent with device name.
        </description>
        <name>yarn.nodemanager.resource-plugins.fpga.allowed-fpga-devices</name>
        <value>0,1</value>
      </property>
    
      <property>
        <description>The http address of the timeline reader web application.</description>
        <name>yarn.timeline-service.reader.webapp.address</name>
        <value>${yarn.timeline-service.webapp.address}</value>
      </property>
    
      <property>
        <description>The https address of the timeline reader web application.</description>
        <name>yarn.timeline-service.reader.webapp.https.address</name>
        <value>${yarn.timeline-service.webapp.https.address}</value>
      </property>
    
      <property>
        <description>
          The actual address timeline reader will bind to. If this optional address is
          set, the reader server will bind to this address and the port specified in
          yarn.timeline-service.reader.webapp.address.
          This is most useful for making the service listen to all interfaces by setting to
          0.0.0.0.
        </description>
        <name>yarn.timeline-service.reader.bind-host</name>
        <value></value>
      </property>
    
      <property>
        <description>
        Whether to enable the NUMA awareness for containers in Node Manager.
        </description>
        <name>yarn.nodemanager.numa-awareness.enabled</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        Whether to read the NUMA topology from the system or from the
        configurations. If the value is true then NM reads the NUMA topology from
        system using the command 'numactl --hardware'. If the value is false then NM
        reads the topology from the configurations
        'yarn.nodemanager.numa-awareness.node-ids'(for node id's),
        'yarn.nodemanager.numa-awareness.<NODE_ID>.memory'(for each node memory),
        'yarn.nodemanager.numa-awareness.<NODE_ID>.cpus'(for each node cpus).
        </description>
        <name>yarn.nodemanager.numa-awareness.read-topology</name>
        <value>false</value>
      </property>
    
      <property>
        <description>
        NUMA node id's in the form of comma separated list. Memory and No of CPUs
        will be read using the properties
        'yarn.nodemanager.numa-awareness.<NODE_ID>.memory' and
        'yarn.nodemanager.numa-awareness.<NODE_ID>.cpus' for each id specified
        in this value. This property value will be read only when
        'yarn.nodemanager.numa-awareness.read-topology=false'.
    
        For example, if yarn.nodemanager.numa-awareness.node-ids=0,1
        then need to specify memory and cpus for node id's '0' and '1' like below,
        yarn.nodemanager.numa-awareness.0.memory=73717
        yarn.nodemanager.numa-awareness.0.cpus=4
        yarn.nodemanager.numa-awareness.1.memory=73727
        yarn.nodemanager.numa-awareness.1.cpus=4
        </description>
        <name>yarn.nodemanager.numa-awareness.node-ids</name>
        <value></value>
      </property>
    
      <property>
        <description>
        The numactl command path which controls NUMA policy for processes or
        shared memory.
        </description>
        <name>yarn.nodemanager.numa-awareness.numactl.cmd</name>
        <value>/usr/bin/numactl</value>
      </property>
    
    </configuration>

[https_blog.csdn.net_u014646662_article_details_82890443]: https://blog.csdn.net/u014646662/article/details/82890443