kube-router之负载均衡器

- 日理万妓 2022-03-20 03:50 426阅读 0赞

![Image 1][]

**Kube-router**是基于Kubernetes网络设计的一个集负载均衡器、防火墙和容器网络的综合方案。

### 主要功能 ###

1. 基于IPVS/LVS的负载均衡器 | `--run-service-proxy`

kube-router采用Linux内核的IPVS模块为K8s提供Service的代理。

更多的详情可以参考：

*  [Kubernetes network services prox with IPVS/LVS][Kubernetes network services prox with IPVS_LVS]
 *  [Kernel Load-Balancing for Docker Containers Using IPVS][]

2. 容器网络 | `--run-router`

kube-router利用BGP协议和Go的GoBGP库和为容器网络提供直连的方案。因为用了原生的Kubernetes API去构建容器网络，意味着在使用kube-router时，不需要在你的集群里面引入其他依赖。

同样的，kube-router在引入容器CNI时也没有其它的依赖，官方的“bridge”插件就能满足kube-rouetr的需求。

更多关于BGP协议在Kubernetes中的使用可以参考：

*  [Kubernetes pod networking and beyond with BGP][]

3. 网络策略管理 | `--run-firewall`

采用了kube-router的Kubernetes很容易通过添加标签到kube-router的方式使用[网路策略][Link 1]功能。kube-router使用了ipset操作iptables，以保证防火墙的规则对系统性能有较低的影响。

Kube-router支持networking.k8s.io/NetworkPolicy的API或者其他基于网络策略的V1/GA语义。

更多关于kube-router防火墙的功能可以参考：

*  [Enforcing Kubernetes network policies with iptables][]

负载均衡器

kube-router的负载均衡器功能，会在物理机上创建一个虚拟的kube-dummy-if网卡，然后利用k8s的watch APi实时更新svc和ep的信息。svc的cluster\_ip会绑定在kube-dummy-if网卡上，作为lvs的virtual server的地址。realserver的ip则通过ep获取到容器的IP地址。

一个单纯的负载均衡器部署如下:

**kubw-router.yaml**

apiVersion: v1
    kind: ConfigMap
    metadata:
      name: kube-router-cfg
      namespace: kube-system
      labels:
        tier: node
        k8s-app: kube-router
    data:
      cni-conf.json: |
        {
          "name":"kubernetes",
          "type":"bridge",
          "bridge":"kube-bridge",
          "isDefaultGateway":true,
          "ipam": {
            "type":"host-local"
          }
        }
    ---
    apiVersion: extensions/v1beta1
    kind: DaemonSet
    metadata:
      name: kube-router
      namespace: kube-system
      labels:
        k8s-app: kube-router
    spec:
      template:
        metadata:
          labels:
            k8s-app: kube-router
          annotations:
            scheduler.alpha.kubernetes.io/critical-pod: ''
        spec:
          containers:
          - name: kube-router
            image: cloudnativelabs/kube-router
            args: ["--run-router=false", "--run-firewall=false", "--run-service-proxy=true", "--kubeconfig=/var/lib/kube-router/kubeconfig", "--masquerade-all", "--ipvs-sync-period=5s", "--iptables-sync-period=10s"]
            securityContext:
              privileged: true
            imagePullPolicy: Always
            env:
            - name: NODE_NAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            volumeMounts:
            - name: lib-modules
              mountPath: /lib/modules
              readOnly: true
            - name: cni-conf-dir
              mountPath: /etc/kubernetes/cni/net.d
            - name: kubeconfig
              mountPath: /var/lib/kube-router/kubeconfig
              readOnly: true
            - name: cert
              mountPath: /etc/kubernetes/ssl
          initContainers:
          - name: install-cni
            image: busybox
            imagePullPolicy: Always
            command:
            - /bin/sh
            - -c
            - set -e -x;
              if [ ! -f /etc/kubernetes/cni/net.d/10-kuberouter.conf ]; then
                TMP=/etc/kubernetes/cni/net.d/.tmp-kuberouter-cfg;
                cp /etc/kube-router/cni-conf.json ${TMP};
                mv ${TMP} /etc/kubernetes/cni/net.d/10-kuberouter.conf;
              fi
            volumeMounts:
            - name: cni-conf-dir
              mountPath: /etc/kubernetes/cni/net.d
            - name: kube-router-cfg
              mountPath: /etc/kube-router
          hostNetwork: true
          nodeSelector:
            kube: router
          volumes:
          - name: lib-modules
            hostPath:
              path: /lib/modules
          - name: cni-conf-dir
            hostPath:
              path: /etc/kubernetes/cni/net.d
          - name: kube-router-cfg
            configMap:
              name: kube-router-cfg
          - name: kubeconfig
            hostPath:
              path: /var/lib/kube-router/kubeconfig
          - name: cert
            hostPath:
              path: /etc/kubernetes/ssl

调整负载均衡的策略支持以下4种方式：

*  最少连接数

kubectl annotate service my-service "kube-router.io/service.scheduler=lc"

*  轮询

kubectl annotate service my-service "kube-router.io/service.scheduler=rr"

*  源地址哈希

kubectl annotate service my-service "kube-router.io/service.scheduler=sh"

*  目的地址哈希

kubectl annotate service my-service "kube-router.io/service.scheduler=dh"

作者：Magine1989  
链接：https://www.jianshu.com/p/d69b40580c87

[Image 1]: 
[Kubernetes network services prox with IPVS_LVS]: https://link.jianshu.com?t=https://cloudnativelabs.github.io/post/2017-05-10-kube-network-service-proxy/
[Kernel Load-Balancing for Docker Containers Using IPVS]: https://link.jianshu.com?t=https://blog.codeship.com/kernel-load-balancing-for-docker-containers-using-ipvs/
[Kubernetes pod networking and beyond with BGP]: https://link.jianshu.com?t=https://cloudnativelabs.github.io/post/2017-05-22-kube-pod-networking/
[Link 1]: https://link.jianshu.com?t=https://kubernetes.io/docs/concepts/services-networking/network-policies/
[Enforcing Kubernetes network policies with iptables]: https://link.jianshu.com?t=https://cloudnativelabs.github.io/post/2017-05-1-kube-network-policies/