SUSE Linux 10 下重命名网卡名字

本是古典何须时尚 2022-03-17 05:24 186阅读 0赞

分享一下我老师大神的人工智能教程。零基础！通俗易懂！风趣幽默！还带黄段子！希望你也加入到我们人工智能的队伍中来！[https://blog.csdn.net/jiangjunshow][https_blog.csdn.net_jiangjunshow]

前阵子碰到suse linux下网卡重命名的问题，是在虚拟机上安装RAC，通过复制虚拟机后需要完成的。与redhat linux，以及oralce linux不同的处理方式，下面将其记录下来，供参考。

1、新节点的网络配置 #启动节点之后没有任何IP配置信息    bo2dbp:~ # ifconfig lo        Link encap:Local Loopback           inet addr:127.0.0.1  Mask:255.0.0.0           inet6 addr: ::1/128 Scope:Host           UP LOOPBACK RUNNING  MTU:16436  Metric:1           RX packets:174 errors:0 dropped:0 overruns:0 frame:0           TX packets:174 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:11471 (11.2 Kb)  TX bytes:11471 (11.2 Kb)2、使用yast2/newcard删除之前的网卡，并为新网卡添加IP地址，路由，机器名       #下面是删除后并配置ip,route之后的信息    bo2dbp:~ # ifconfig eth3      Link encap:Ethernet  HWaddr 00:0C:29:99:DF:0F           inet addr:192.168.7.71  Bcast:192.168.7.255  Mask:255.255.255.0           inet6 addr: fe80::20c:29ff:fe99:df0f/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:10 errors:0 dropped:0 overruns:0 frame:0           TX packets:4 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:2387 (2.3 Kb)  TX bytes:328 (328.0 b)  eth4      Link encap:Ethernet  HWaddr 00:0C:29:99:DF:19           inet addr:10.10.7.71  Bcast:10.10.7.255  Mask:255.255.255.0           inet6 addr: fe80::20c:29ff:fe99:df19/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:7 errors:0 dropped:0 overruns:0 frame:0           TX packets:3 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:1607 (1.5 Kb)  TX bytes:238 (238.0 b)  lo        Link encap:Local Loopback           inet addr:127.0.0.1  Mask:255.0.0.0           inet6 addr: ::1/128 Scope:Host           UP LOOPBACK RUNNING  MTU:16436  Metric:1           RX packets:206 errors:0 dropped:0 overruns:0 frame:0           TX packets:206 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:13803 (13.4 Kb)  TX bytes:13803 (13.4 Kb)3、停用网路 bo2dbp:~ # rcnetwork stop Shutting down network interfaces:     eth3      device: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)     eth3      configuration: eth-bus-pci-0000:02:00.0     eth3                                                              done     eth4      device: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)     eth4      configuration: eth-bus-pci-0000:02:02.0     eth4                                                              done Shutting down service network  .  .  .  .  .  .  .  .  .  .  .  .  .  done4、编辑配置文件 #将原来的eth0 与 eth1注释掉 #并将新的mac地址条目改为eth0与eth1 bo2dbp:~ # vi /etc/udev/rules.d/30-net_persistent_names.rules  #SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:8a:6c:c8", IMPORT="/lib/udev/rename_netiface %k eth0" #SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:8a:6c:d2", IMPORT="/lib/udev/rename_netiface %k eth1" SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:99:df:0f", IMPORT="/lib/udev/rename_netiface %k eth0" SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:99:df:19", IMPORT="/lib/udev/rename_netiface %k eth1"5、使用rename_netiface命令重命名网络接口 bo2dbp:~ # cd /lib/udev bo2dbp:/lib/udev # ./rename_netiface eth3 eth0 INTERFACE=eth0 DEVPATH=/eth0 RENAMED=yes bo2dbp:/lib/udev # ./rename_netiface eth4 eth1 INTERFACE=eth1 DEVPATH=/eth1 RENAMED=yes6、重启网络 bo2dbp:/lib/udev # rcnetwork start Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces:     lo     lo        IP address: 127.0.0.1/8               IP address: 127.0.0.2/8 Checking for network time protocol daemon (NTPD):                     unused     lo                                                                done     eth0      device: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)     eth0      configuration: eth-bus-pci-0000:02:00.0     eth0      IP address: 192.168.7.71/24 Checking for network time protocol daemon (NTPD):                     unused     eth0                                                              done     eth1      device: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)     eth1      configuration: eth-bus-pci-0000:02:02.0     eth1      IP address: 10.10.7.71/24 Checking for network time protocol daemon (NTPD):                     unused     eth1                                                              done Setting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  done7、检查结果 bo2dbp:/lib/udev # ifconfig eth0      Link encap:Ethernet  HWaddr 00:0C:29:99:DF:0F           inet addr:192.168.7.71  Bcast:192.168.7.255  Mask:255.255.255.0           inet6 addr: fe80::20c:29ff:fe99:df0f/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:754 errors:0 dropped:0 overruns:0 frame:0           TX packets:12 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:136187 (132.9 Kb)  TX bytes:936 (936.0 b)  eth1      Link encap:Ethernet  HWaddr 00:0C:29:99:DF:19           inet addr:10.10.7.71  Bcast:10.10.7.255  Mask:255.255.255.0           inet6 addr: fe80::20c:29ff:fe99:df19/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:752 errors:0 dropped:0 overruns:0 frame:0           TX packets:12 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:136065 (132.8 Kb)  TX bytes:936 (936.0 b)  lo        Link encap:Local Loopback           inet addr:127.0.0.1  Mask:255.0.0.0           inet6 addr: ::1/128 Scope:Host           UP LOOPBACK RUNNING  MTU:16436  Metric:1           RX packets:206 errors:0 dropped:0 overruns:0 frame:0           TX packets:206 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:13803 (13.4 Kb)  TX bytes:13803 (13.4 Kb)  事实上，我们可以根据上述方法来将网卡设定为有意义的接口名字，如lan0,lan1,public0,public1。 Author: Robinson Blog  : http://blog.csdn.net/robinson_0612

更多参考

[Linux/Unix shell sql 之间传递变量][Linux_Unix shell sql]  
[Linux/Unix shell 脚本中调用SQL,RMAN脚本  
][Linux_Unix shell _SQL_RMAN_]

有关基于用户管理的备份和备份恢复的概念请参考

[Oracle 冷备份][Oracle]

[Oracle 热备份][Oracle 1]

[Oracle 备份恢复概念][Oracle 2]

[Oracle 实例恢复][Oracle 3]

[Oracle 基于用户管理恢复的处理][Oracle 4]

[SYSTEM 表空间管理及备份恢复][SYSTEM]

[SYSAUX表空间管理及恢复][SYSAUX]

[Oracle 基于备份控制文件的恢复(unsing backup controlfile)][Oracle _unsing backup controlfile]

有关RMAN的备份恢复与管理请参考

[RMAN 概述及其体系结构][RMAN]

[RMAN 配置、监控与管理][RMAN 1]

[RMAN 备份详解][RMAN 2]

[RMAN 还原与恢复][RMAN 3]

[RMAN catalog 的创建和使用][RMAN catalog]

[基于catalog 创建RMAN存储脚本][catalog _RMAN]

[基于catalog 的RMAN 备份与恢复][catalog _RMAN 1]

[RMAN 备份路径困惑(使用plus archivelog时)][RMAN _plus archivelog]

有关ORACLE体系结构请参考

[Oracle 表空间与数据文件][Oracle 5]

[Oracle 密码文件][Oracle 6]

[Oracle 参数文件][Oracle 7]

[Oracle 联机重做日志文件(ONLINE LOG FILE)][Oracle _ONLINE LOG FILE]

[Oracle 控制文件(CONTROLFILE)][Oracle _CONTROLFILE]

[Oracle 归档日志][Oracle 8]

[Oracle 回滚(ROLLBACK)和撤销(UNDO)][Oracle _ROLLBACK_UNDO]

[Oracle 数据库实例启动关闭过程][Oracle 9]

[Oracle 10g SGA 的自动化管理][Oracle 10g SGA]

[Oracle 实例和Oracle数据库(Oracle体系结构)][Oracle _Oracle_Oracle]

[https_blog.csdn.net_jiangjunshow]: https://blog.csdn.net/jiangjunshow/article/details/77338485
[Linux_Unix shell sql]: http://blog.csdn.net/robinson_0612/article/details/7978179
[Linux_Unix shell _SQL_RMAN_]: http://blog.csdn.net/robinson_0612/article/details/7965916
[Oracle]: http://blog.csdn.net/robinson_0612/archive/2010/08/05/5791597.aspx
[Oracle 1]: http://blog.csdn.net/robinson_0612/archive/2010/08/16/5816012.aspx
[Oracle 2]: http://blog.csdn.net/robinson_0612/archive/2010/08/05/5791585.aspx
[Oracle 3]: http://blog.csdn.net/robinson_0612/archive/2010/07/27/5768233.aspx
[Oracle 4]: http://blog.csdn.net/robinson_0612/archive/2010/11/28/6041217.aspx
[SYSTEM]: http://blog.csdn.net/robinson_0612/article/details/6041207
[SYSAUX]: http://blog.csdn.net/robinson_0612/archive/2010/08/13/5810732.aspx
[Oracle _unsing backup controlfile]: http://blog.csdn.net/robinson_0612/article/details/7962187
[RMAN]: http://blog.csdn.net/robinson_0612/archive/2010/11/24/6032525.aspx
[RMAN 1]: http://blog.csdn.net/robinson_0612/archive/2010/11/24/6032597.aspx
[RMAN 2]: http://blog.csdn.net/robinson_0612/archive/2010/11/24/6032739.aspx
[RMAN 3]: http://blog.csdn.net/robinson_0612/archive/2010/11/28/6041247.aspx
[RMAN catalog]: http://blog.csdn.net/robinson_0612/archive/2010/11/29/6043649.aspx
[catalog _RMAN]: http://blog.csdn.net/robinson_0612/archive/2010/12/13/6073020.aspx
[catalog _RMAN 1]: http://blog.csdn.net/robinson_0612/archive/2010/12/13/6073069.aspx
[RMAN _plus archivelog]: http://blog.csdn.net/robinson_0612/article/details/6414338
[Oracle 5]: http://blog.csdn.net/robinson_0612/archive/2010/05/20/5611738.aspx
[Oracle 6]: http://blog.csdn.net/robinson_0612/archive/2010/05/20/5611672.aspx
[Oracle 7]: http://blog.csdn.net/robinson_0612/archive/2010/05/05/5559174.aspx
[Oracle _ONLINE LOG FILE]: http://blog.csdn.net/robinson_0612/archive/2010/07/20/5749556.aspx
[Oracle _CONTROLFILE]: http://blog.csdn.net/robinson_0612/archive/2010/07/15/5737527.aspx
[Oracle 8]: http://blog.csdn.net/robinson_0612/archive/2010/08/03/5784713.aspx
[Oracle _ROLLBACK_UNDO]: http://blog.csdn.net/robinson_0612/archive/2010/07/13/5731158.aspx
[Oracle 9]: http://blog.csdn.net/robinson_0612/archive/2010/04/29/5542983.aspx
[Oracle 10g SGA]: http://blog.csdn.net/robinson_0612/archive/2010/04/27/5534832.aspx
[Oracle _Oracle_Oracle]: http://blog.csdn.net/robinson_0612/archive/2010/04/26/5529239.aspx