centos7下部署gitlab

╰半橙微兮° 2022-02-15 12:15 486阅读 0赞

## 查看linux版本 ##

[lijintao@localhost ~]$ cat /etc/redhat-release 
    	CentOS Linux release 7.4.1708 (Core)

## 配置固定网络ip ##

[root@localhost ~]# cd /etc/sysconfig/network-scripts/
    	[root@localhost network-scripts]# ll |less

## vim进行修改红框内文件 ##

![ip地址配置文件][ip]  
打开后

> TYPE=“Ethernet”  
> PROXY\_METHOD=“none”  
> BROWSER\_ONLY=“no”  
> BOOTPROTO=“dhcp”  
> DEFROUTE=“yes”  
> IPV4\_FAILURE\_FATAL=“no”  
> IPV6INIT=“yes”  
> IPV6\_AUTOCONF=“yes”  
> IPV6\_DEFROUTE=“yes”  
> IPV6\_FAILURE\_FATAL=“no”  
> IPV6\_ADDR\_GEN\_MODE=“stable-privacy”  
> NAME=“ens32”  
> UUID=“9c6245e6-1fec-40b2-b08a-7af8324c5522”  
> DEVICE=“ens32”  
> ONBOOT=“yes”  
> ZONE=

修改后

> TYPE=“Ethernet”  
> PROXY\_METHOD=“none”  
> BROWSER\_ONLY=“no”  
> BOOTPROTO=“static”  
> DEFROUTE=“yes”  
> IPV4\_FAILURE\_FATAL=“no”  
> IPV6INIT=“yes”  
> IPV6\_AUTOCONF=“yes”  
> IPV6\_DEFROUTE=“yes”  
> IPV6\_FAILURE\_FATAL=“no”  
> IPV6\_ADDR\_GEN\_MODE=“stable-privacy”  
> NAME=“ens32”  
> UUID=“9c6245e6-1fec-40b2-b08a-7af8324c5522”  
> DEVICE=“ens32”  
> ONBOOT=“yes”  
> ZONE=  
> IPADDR=“192.168.145.128”  
> GATEWAY=“192.168.145.2”  
> DNS1=“192.168.145.2”

## 重启网络服务并查看 ##

[root@localhost network-scripts]# service network restart
    Restarting network (via systemctl):                        [  确定  ]
    [root@localhost network-scripts]# ^C
    [root@localhost network-scripts]# ifconfig
    ens32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.145.128  netmask 255.255.255.0  broadcast 192.168.145.255
            inet6 fe80::b9d:8f0e:51ec:3fd  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:6e:70:06  txqueuelen 1000  (Ethernet)
            RX packets 784057  bytes 1156666505 (1.0 GiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 176705  bytes 11191165 (10.6 MiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 92  bytes 10032 (9.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 92  bytes 10032 (9.7 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
            ether 52:54:00:38:27:97  txqueuelen 1000  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

## 接着通过xftp6上传文件(我采用先下rpm包的形式，主要原因怕虚拟机网络不正常) ##

你可以[官网][Link 1]的方式安装点击如下链接https://www.gitlab.com.cn/installation/\#centos-7

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQxMjA4MjUz_size_16_color_FFFFFF_t_70]  
你可以去[官网][Link 2]下载rpm包，也可以去我的百度网盘上

> 文件链接: [https://pan.baidu.com/s/1qxdh-Nn6bjlr3I9D9\_HbEg][https_pan.baidu.com_s_1qxdh-Nn6bjlr3I9D9_HbEg] 提取码: sqiz

## 编写一个install.sh执行文件，省的一个个去执行 ##

[root@localhost opt]# vim install.sh
    以下是文件里的内容
    sudo rpm -ivh /opt/gitlab-ce-10.8.2-ce.0.el7.x86_64.rpm
    sudo yum install -y curl policycoreutils-python openssh-server cronie
    sudo lokkit -s http -s ssh
    sudo yum install postfix
    sudo service postfix start
    sudo chkconfig postfix on
    curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ce/script.rpm.sh | sudo bash
    sudo EXTERNAL_URL="http://gitlab.example.com" yum -y install gitlab-ce
    修改该文件权限，变成可执行文件
    [root@localhost opt]# chmod 755 install.sh 
    [root@localhost opt]# ll
    总用量 403104
    -rw-r--r--. 1 root root 412774002 4月  24 11:24 gitlab-ce-10.8.2-ce.0.el7.x86_64.rpm
    -rwxr-xr-x. 1 root root       399 4月  24 14:08 install.sh
    drwxr-xr-x. 2 root root         6 3月  26 2015 rh
    执行
    [root@localhost opt]# ./install.sh

记得这步操作后记得重启它 reboot

## 初始化配置gitlab ##

需要等待一段时间

[root@localhost ~]# gitlab-ctl reconfigure

## 启动gitlab 服务 ##

> gitlab-ctl start

[root@localhost ~]# gitlab-ctl start
    ok: run: alertmanager: (pid 4957) 107s
    ok: run: gitaly: (pid 4817) 114s
    ok: run: gitlab-monitor: (pid 4881) 112s
    ok: run: gitlab-workhorse: (pid 4850) 113s
    ok: run: logrotate: (pid 4112) 234s
    ok: run: nginx: (pid 4005) 256s
    ok: run: node-exporter: (pid 4868) 113s
    ok: run: postgres-exporter: (pid 4976) 108s
    ok: run: postgresql: (pid 3418) 315s
    ok: run: prometheus: (pid 4902) 111s
    ok: run: redis: (pid 3064) 332s
    ok: run: redis-exporter: (pid 4889) 111s
    ok: run: sidekiq: (pid 3831) 268s
    ok: run: unicorn: (pid 3748) 274s

## 停止gitlab 服务 ##

> gitlab-ctl stop

## 记得关防火墙 ##

与centos6的写法不同

> \[root@localhost ~\]\# service firewalld stop  
> Redirecting to /bin/systemctl stop firewalld.service

## 在你的windows的游览器中输入linux的ip地址 ##

初次登录时需要为gitlab 的root 用户设置密码。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQxMjA4MjUz_size_16_color_FFFFFF_t_70 1]

[ip]: /images/20220215/a4ccd0ab355e4aaeb7d08f840a53d530.png
[Link 1]: https://www.gitlab.com.cn/installation/#centos-7
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQxMjA4MjUz_size_16_color_FFFFFF_t_70]: /images/20220215/9427573eacbb427d83ef204f8d4aba8d.png
[Link 2]: https://packages.gitlab.com/gitlab/gitlab-ce/packages/el/7/gitlab-ce-10.8.2-ce.0.el7.x86_64.rpm
[https_pan.baidu.com_s_1qxdh-Nn6bjlr3I9D9_HbEg]: https://pan.baidu.com/s/1qxdh-Nn6bjlr3I9D9_HbEg
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQxMjA4MjUz_size_16_color_FFFFFF_t_70 1]: /images/20220215/af183db45f424da0be711d82c27657f4.png