Spring boot入门七参数配置大全

女爷i 2022-01-26 09:37 376阅读 0赞

**Spring Boot配置文件中所有相关组件参数配置官方案例：**

# ===================================================================
    # COMMON SPRING BOOT PROPERTIES
    #
    # This sample file is provided as a guideline. Do NOT copy it in its
    # entirety to your own application.               ^^^
    # ===================================================================
    
    
    # ----------------------------------------
    # CORE PROPERTIES
    # ----------------------------------------
    debug=false # Enable debug logs.
    trace=false # Enable trace logs.
    
    # LOGGING
    logging.config= # Location of the logging configuration file. For instance, `classpath:logback.xml` for Logback.
    logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions.
    logging.file= # Log file name (for instance, `myapp.log`). Names can be an exact location or relative to the current directory.
    logging.file.max-history=0 # Maximum of archive log files to keep. Only supported with the default logback setup.
    logging.file.max-size=10MB # Maximum log file size. Only supported with the default logback setup.
    logging.group.*= # Log groups to quickly change multiple loggers at the same time. For instance, `logging.level.db=org.hibernate,org.springframework.jdbc`.
    logging.level.*= # Log levels severity mapping. For instance, `logging.level.org.springframework=DEBUG`.
    logging.path= # Location of the log file. For instance, `/var/log`.
    logging.pattern.console= # Appender pattern for output to the console. Supported only with the default Logback setup.
    logging.pattern.dateformat=yyyy-MM-dd HH:mm:ss.SSS # Appender pattern for log date format. Supported only with the default Logback setup.
    logging.pattern.file= # Appender pattern for output to a file. Supported only with the default Logback setup.
    logging.pattern.level=%5p # Appender pattern for log level. Supported only with the default Logback setup.
    logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized.
    
    # AOP
    spring.aop.auto=true # Add @EnableAspectJAutoProxy.
    spring.aop.proxy-target-class=true # Whether subclass-based (CGLIB) proxies are to be created (true), as opposed to standard Java interface-based proxies (false).
    
    # IDENTITY (ContextIdApplicationContextInitializer)
    spring.application.name= # Application name.
    
    # ADMIN (SpringApplicationAdminJmxAutoConfiguration)
    spring.application.admin.enabled=false # Whether to enable admin features for the application.
    spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean.
    
    # AUTO-CONFIGURATION
    spring.autoconfigure.exclude= # Auto-configuration classes to exclude.
    
    # BANNER
    spring.banner.charset=UTF-8 # Banner file encoding.
    spring.banner.location=classpath:banner.txt # Banner text resource location.
    spring.banner.image.location=classpath:banner.gif # Banner image file location (jpg or png can also be used).
    spring.banner.image.width=76 # Width of the banner image in chars.
    spring.banner.image.height= # Height of the banner image in chars (default based on image height).
    spring.banner.image.margin=2 # Left hand image margin in chars.
    spring.banner.image.invert=false # Whether images should be inverted for dark terminal themes.
    
    # SPRING CORE
    spring.beaninfo.ignore=true # Whether to skip search of BeanInfo classes.
    
    # SPRING CACHE (CacheProperties)
    spring.cache.cache-names= # Comma-separated list of cache names to create if supported by the underlying cache manager.
    spring.cache.caffeine.spec= # The spec to use to create caches. See CaffeineSpec for more details on the spec format.
    spring.cache.couchbase.expiration= # Entry expiration. By default the entries never expire. Note that this value is ultimately converted to seconds.
    spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache.
    spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan.
    spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager.
    spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Needed only if more than one JSR-107 implementation is available on the classpath.
    spring.cache.redis.cache-null-values=true # Allow caching null values.
    spring.cache.redis.key-prefix= # Key prefix.
    spring.cache.redis.time-to-live= # Entry expiration. By default the entries never expire.
    spring.cache.redis.use-key-prefix=true # Whether to use the key prefix when writing to Redis.
    spring.cache.type= # Cache type. By default, auto-detected according to the environment.
    
    # SPRING CONFIG - using environment property only (ConfigFileApplicationListener)
    spring.config.additional-location= # Config file locations used in addition to the defaults.
    spring.config.location= # Config file locations that replace the defaults.
    spring.config.name=application # Config file name.
    
    # HAZELCAST (HazelcastProperties)
    spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast.
    
    # PROJECT INFORMATION (ProjectInfoProperties)
    spring.info.build.encoding=UTF-8 # File encoding.
    spring.info.build.location=classpath:META-INF/build-info.properties # Location of the generated build-info.properties file.
    spring.info.git.encoding=UTF-8 # File encoding.
    spring.info.git.location=classpath:git.properties # Location of the generated git.properties file.
    
    # JMX
    spring.jmx.default-domain= # JMX domain name.
    spring.jmx.enabled=true # Expose management beans to the JMX domain.
    spring.jmx.server=mbeanServer # MBeanServer bean name.
    spring.jmx.unique-names=false # Whether unique runtime object names should be ensured.
    
    # Email (MailProperties)
    spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding.
    spring.mail.host= # SMTP server host. For instance, `smtp.example.com`.
    spring.mail.jndi-name= # Session JNDI name. When set, takes precedence over other Session settings.
    spring.mail.password= # Login password of the SMTP server.
    spring.mail.port= # SMTP server port.
    spring.mail.properties.*= # Additional JavaMail Session properties.
    spring.mail.protocol=smtp # Protocol used by the SMTP server.
    spring.mail.test-connection=false # Whether to test that the mail server is available on startup.
    spring.mail.username= # Login user of the SMTP server.
    
    # APPLICATION SETTINGS (SpringApplication)
    spring.main.allow-bean-definition-overriding=false # Whether bean definition overriding, by registering a definition with the same name as an existing definition, is allowed.
    spring.main.banner-mode=console # Mode used to display the banner when the application runs.
    spring.main.sources= # Sources (class names, package names, or XML resource locations) to include in the ApplicationContext.
    spring.main.web-application-type= # Flag to explicitly request a specific type of web application. If not set, auto-detected based on the classpath.
    
    # FILE ENCODING (FileEncodingApplicationListener)
    spring.mandatory-file-encoding= # Expected character encoding the application must use.
    
    # INTERNATIONALIZATION (MessageSourceProperties)
    spring.messages.always-use-message-format=false # Whether to always apply the MessageFormat rules, parsing even messages without arguments.
    spring.messages.basename=messages # Comma-separated list of basenames (essentially a fully-qualified classpath location), each following the ResourceBundle convention with relaxed support for slash based locations.
    spring.messages.cache-duration= # Loaded resource bundle files cache duration. When not set, bundles are cached forever. If a duration suffix is not specified, seconds will be used.
    spring.messages.encoding=UTF-8 # Message bundles encoding.
    spring.messages.fallback-to-system-locale=true # Whether to fall back to the system Locale if no files for a specific Locale have been found.
    spring.messages.use-code-as-default-message=false # Whether to use the message code as the default message instead of throwing a "NoSuchMessageException". Recommended during development only.
    
    # OUTPUT
    spring.output.ansi.enabled=detect # Configures the ANSI output.
    
    # PID FILE (ApplicationPidFileWriter)
    spring.pid.fail-on-write-error= # Fails if ApplicationPidFileWriter is used but it cannot write the PID file.
    spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used).
    
    # PROFILES
    spring.profiles.active= # Comma-separated list of active profiles. Can be overridden by a command line switch.
    spring.profiles.include= # Unconditionally activate the specified comma-separated list of profiles (or list of profiles if using YAML).
    
    # QUARTZ SCHEDULER (QuartzProperties)
    spring.quartz.auto-startup=true # Whether to automatically start the scheduler after initialization.
    spring.quartz.jdbc.comment-prefix=-- # Prefix for single-line comments in SQL initialization scripts.
    spring.quartz.jdbc.initialize-schema=embedded # Database schema initialization mode.
    spring.quartz.jdbc.schema=classpath:org/quartz/impl/jdbcjobstore/tables_@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
    spring.quartz.job-store-type=memory # Quartz job store type.
    spring.quartz.overwrite-existing-jobs=false # Whether configured jobs should overwrite existing job definitions.
    spring.quartz.properties.*= # Additional Quartz Scheduler properties.
    spring.quartz.scheduler-name=quartzScheduler # Name of the scheduler.
    spring.quartz.startup-delay=0s # Delay after which the scheduler is started once initialization completes.
    spring.quartz.wait-for-jobs-to-complete-on-shutdown=false # Whether to wait for running jobs to complete on shutdown.
    
    # REACTOR (ReactorCoreProperties)
    spring.reactor.stacktrace-mode.enabled=false # Whether Reactor should collect stacktrace information at runtime.
    
    # SENDGRID (SendGridAutoConfiguration)
    spring.sendgrid.api-key= # SendGrid API key.
    spring.sendgrid.proxy.host= # SendGrid proxy host.
    spring.sendgrid.proxy.port= # SendGrid proxy port.
    
    # TASK EXECUTION  (TaskExecutionProperties)
    spring.task.execution.pool.allow-core-thread-timeout=true # Whether core threads are allowed to time out. This enables dynamic growing and shrinking of the pool.
    spring.task.execution.pool.core-size=8 # Core number of threads.
    spring.task.execution.pool.keep-alive=60s # Time limit for which threads may remain idle before being terminated.
    spring.task.execution.pool.max-size= # Maximum allowed number of threads. If tasks are filling up the queue, the pool can expand up to that size to accommodate the load. Ignored if the queue is unbounded.
    spring.task.execution.pool.queue-capacity= # Queue capacity. An unbounded capacity does not increase the pool and therefore ignores the "max-size" property.
    spring.task.execution.thread-name-prefix=task- # Prefix to use for the names of newly created threads.
    
    # TASK SCHEDULING  (TaskSchedulingProperties)
    spring.task.scheduling.pool.size=1 # Maximum allowed number of threads.
    spring.task.scheduling.thread-name-prefix=scheduling- # Prefix to use for the names of newly created threads.
    
    # ----------------------------------------
    # WEB PROPERTIES
    # ----------------------------------------
    
    # EMBEDDED SERVER CONFIGURATION (ServerProperties)
    server.address= # Network address to which the server should bind.
    server.compression.enabled=false # Whether response compression is enabled.
    server.compression.excluded-user-agents= # Comma-separated list of user agents for which responses should not be compressed.
    server.compression.mime-types=text/html,text/xml,text/plain,text/css,text/javascript,application/javascript,application/json,application/xml # Comma-separated list of MIME types that should be compressed.
    server.compression.min-response-size=2KB # Minimum "Content-Length" value that is required for compression to be performed.
    server.connection-timeout= # Time that connectors wait for another HTTP request before closing the connection. When not set, the connector's container-specific default is used. Use a value of -1 to indicate no (that is, an infinite) timeout.
    server.error.include-exception=false # Include the "exception" attribute.
    server.error.include-stacktrace=never # When to include a "stacktrace" attribute.
    server.error.path=/error # Path of the error controller.
    server.error.whitelabel.enabled=true # Whether to enable the default error page displayed in browsers in case of a server error.
    server.http2.enabled=false # Whether to enable HTTP/2 support, if the current environment supports it.
    server.jetty.acceptors=-1 # Number of acceptor threads to use. When the value is -1, the default, the number of acceptors is derived from the operating environment.
    server.jetty.accesslog.append=false # Append to log.
    server.jetty.accesslog.date-format=dd/MMM/yyyy:HH:mm:ss Z # Timestamp format of the request log.
    server.jetty.accesslog.enabled=false # Enable access log.
    server.jetty.accesslog.extended-format=false # Enable extended NCSA format.
    server.jetty.accesslog.file-date-format= # Date format to place in log file name.
    server.jetty.accesslog.filename= # Log filename. If not specified, logs redirect to "System.err".
    server.jetty.accesslog.locale= # Locale of the request log.
    server.jetty.accesslog.log-cookies=false # Enable logging of the request cookies.
    server.jetty.accesslog.log-latency=false # Enable logging of request processing time.
    server.jetty.accesslog.log-server=false # Enable logging of the request hostname.
    server.jetty.accesslog.retention-period=31 # Number of days before rotated log files are deleted.
    server.jetty.accesslog.time-zone=GMT # Timezone of the request log.
    server.jetty.max-http-post-size=200000B # Maximum size of the HTTP post or put content.
    server.jetty.selectors=-1 # Number of selector threads to use. When the value is -1, the default, the number of selectors is derived from the operating environment.
    server.max-http-header-size=8KB # Maximum size of the HTTP message header.
    server.port=8080 # Server HTTP port.
    server.server-header= # Value to use for the Server response header (if empty, no header is sent).
    server.use-forward-headers= # Whether X-Forwarded-* headers should be applied to the HttpRequest.
    server.servlet.context-parameters.*= # Servlet context init parameters.
    server.servlet.context-path= # Context path of the application.
    server.servlet.application-display-name=application # Display name of the application.
    server.servlet.jsp.class-name=org.apache.jasper.servlet.JspServlet # Class name of the servlet to use for JSPs.
    server.servlet.jsp.init-parameters.*= # Init parameters used to configure the JSP servlet.
    server.servlet.jsp.registered=true # Whether the JSP servlet is registered.
    server.servlet.session.cookie.comment= # Comment for the session cookie.
    server.servlet.session.cookie.domain= # Domain for the session cookie.
    server.servlet.session.cookie.http-only= # Whether to use "HttpOnly" cookies for session cookies.
    server.servlet.session.cookie.max-age= # Maximum age of the session cookie. If a duration suffix is not specified, seconds will be used.
    server.servlet.session.cookie.name= # Session cookie name.
    server.servlet.session.cookie.path= # Path of the session cookie.
    server.servlet.session.cookie.secure= # Whether to always mark the session cookie as secure.
    server.servlet.session.persistent=false # Whether to persist session data between restarts.
    server.servlet.session.store-dir= # Directory used to store session data.
    server.servlet.session.timeout=30m # Session timeout. If a duration suffix is not specified, seconds will be used.
    server.servlet.session.tracking-modes= # Session tracking modes.
    server.ssl.ciphers= # Supported SSL ciphers.
    server.ssl.client-auth= # Client authentication mode.
    server.ssl.enabled=true # Whether to enable SSL support.
    server.ssl.enabled-protocols= # Enabled SSL protocols.
    server.ssl.key-alias= # Alias that identifies the key in the key store.
    server.ssl.key-password= # Password used to access the key in the key store.
    server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file).
    server.ssl.key-store-password= # Password used to access the key store.
    server.ssl.key-store-provider= # Provider for the key store.
    server.ssl.key-store-type= # Type of the key store.
    server.ssl.protocol=TLS # SSL protocol to use.
    server.ssl.trust-store= # Trust store that holds SSL certificates.
    server.ssl.trust-store-password= # Password used to access the trust store.
    server.ssl.trust-store-provider= # Provider for the trust store.
    server.ssl.trust-store-type= # Type of the trust store.
    server.tomcat.accept-count=100 # Maximum queue length for incoming connection requests when all possible request processing threads are in use.
    server.tomcat.accesslog.buffered=true # Whether to buffer output such that it is flushed only periodically.
    server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be absolute or relative to the Tomcat base dir.
    server.tomcat.accesslog.enabled=false # Enable access log.
    server.tomcat.accesslog.file-date-format=.yyyy-MM-dd # Date format to place in the log file name.
    server.tomcat.accesslog.pattern=common # Format pattern for access logs.
    server.tomcat.accesslog.prefix=access_log # Log file name prefix.
    server.tomcat.accesslog.rename-on-rotate=false # Whether to defer inclusion of the date stamp in the file name until rotate time.
    server.tomcat.accesslog.request-attributes-enabled=false # Set request attributes for the IP address, Hostname, protocol, and port used for the request.
    server.tomcat.accesslog.rotate=true # Whether to enable access log rotation.
    server.tomcat.accesslog.suffix=.log # Log file name suffix.
    server.tomcat.additional-tld-skip-patterns= # Comma-separated list of additional patterns that match jars to ignore for TLD scanning.
    server.tomcat.background-processor-delay=10s # Delay between the invocation of backgroundProcess methods. If a duration suffix is not specified, seconds will be used.
    server.tomcat.basedir= # Tomcat base directory. If not specified, a temporary directory is used.
    server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
    		192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\
    		169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\
    		127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
    		172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
    		172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
    		172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3}\\
    		0:0:0:0:0:0:0:1\\
    		::1 # Regular expression that matches proxies that are to be trusted.
    server.tomcat.max-connections=10000 # Maximum number of connections that the server accepts and processes at any given time.
    server.tomcat.max-http-post-size=2MB # Maximum size of the HTTP post content.
    server.tomcat.max-swallow-size=2MB # Maximum amount of request body to swallow.
    server.tomcat.max-threads=200 # Maximum amount of worker threads.
    server.tomcat.min-spare-threads=10 # Minimum amount of worker threads.
    server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value.
    server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto".
    server.tomcat.protocol-header-https-value=https # Value of the protocol header indicating whether the incoming request uses SSL.
    server.tomcat.redirect-context-root=true # Whether requests to the context root should be redirected by appending a / to the path.
    server.tomcat.remote-ip-header= # Name of the HTTP header from which the remote IP is extracted. For instance, `X-FORWARDED-FOR`.
    server.tomcat.resource.allow-caching=true # Whether static resource caching is permitted for this web application.
    server.tomcat.resource.cache-ttl= # Time-to-live of the static resource cache.
    server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI.
    server.tomcat.use-relative-redirects= # Whether HTTP 1.1 and later location headers generated by a call to sendRedirect will use relative or absolute redirects.
    server.undertow.accesslog.dir= # Undertow access log directory.
    server.undertow.accesslog.enabled=false # Whether to enable the access log.
    server.undertow.accesslog.pattern=common # Format pattern for access logs.
    server.undertow.accesslog.prefix=access_log. # Log file name prefix.
    server.undertow.accesslog.rotate=true # Whether to enable access log rotation.
    server.undertow.accesslog.suffix=log # Log file name suffix.
    server.undertow.buffer-size= # Size of each buffer.
    server.undertow.direct-buffers= # Whether to allocate buffers outside the Java heap. The default is derived from the maximum amount of memory that is available to the JVM.
    server.undertow.eager-filter-init=true # Whether servlet filters should be initialized on startup.
    server.undertow.io-threads= # Number of I/O threads to create for the worker. The default is derived from the number of available processors.
    server.undertow.max-http-post-size=-1B # Maximum size of the HTTP post content. When the value is -1, the default, the size is unlimited.
    server.undertow.worker-threads= # Number of worker threads. The default is 8 times the number of I/O threads.
    
    # FREEMARKER (FreeMarkerProperties)
    spring.freemarker.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.freemarker.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.freemarker.cache=false # Whether to enable template caching.
    spring.freemarker.charset=UTF-8 # Template encoding.
    spring.freemarker.check-template-location=true # Whether to check that the templates location exists.
    spring.freemarker.content-type=text/html # Content-Type value.
    spring.freemarker.enabled=true # Whether to enable MVC view resolution for this technology.
    spring.freemarker.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
    spring.freemarker.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
    spring.freemarker.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
    spring.freemarker.prefer-file-system-access=true # Whether to prefer file system access for template loading. File system access enables hot detection of template changes.
    spring.freemarker.prefix= # Prefix that gets prepended to view names when building a URL.
    spring.freemarker.request-context-attribute= # Name of the RequestContext attribute for all views.
    spring.freemarker.settings.*= # Well-known FreeMarker keys which are passed to FreeMarker's Configuration.
    spring.freemarker.suffix=.ftl # Suffix that gets appended to view names when building a URL.
    spring.freemarker.template-loader-path=classpath:/templates/ # Comma-separated list of template paths.
    spring.freemarker.view-names= # White list of view names that can be resolved.
    
    # GROOVY TEMPLATES (GroovyTemplateProperties)
    spring.groovy.template.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.groovy.template.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.groovy.template.cache=false # Whether to enable template caching.
    spring.groovy.template.charset=UTF-8 # Template encoding.
    spring.groovy.template.check-template-location=true # Whether to check that the templates location exists.
    spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer
    spring.groovy.template.content-type=text/html # Content-Type value.
    spring.groovy.template.enabled=true # Whether to enable MVC view resolution for this technology.
    spring.groovy.template.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
    spring.groovy.template.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
    spring.groovy.template.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
    spring.groovy.template.prefix= # Prefix that gets prepended to view names when building a URL.
    spring.groovy.template.request-context-attribute= # Name of the RequestContext attribute for all views.
    spring.groovy.template.resource-loader-path=classpath:/templates/ # Template path.
    spring.groovy.template.suffix=.tpl # Suffix that gets appended to view names when building a URL.
    spring.groovy.template.view-names= # White list of view names that can be resolved.
    
    # SPRING HATEOAS (HateoasProperties)
    spring.hateoas.use-hal-as-default-json-media-type=true # Whether application/hal+json responses should be sent to requests that accept application/json.
    
    # HTTP (HttpProperties)
    spring.http.converters.preferred-json-mapper= # Preferred JSON mapper to use for HTTP message conversion. By default, auto-detected according to the environment.
    spring.http.encoding.charset=UTF-8 # Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.
    spring.http.encoding.enabled=true # Whether to enable http encoding support.
    spring.http.encoding.force= # Whether to force the encoding to the configured charset on HTTP requests and responses.
    spring.http.encoding.force-request= # Whether to force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.
    spring.http.encoding.force-response= # Whether to force the encoding to the configured charset on HTTP responses.
    spring.http.encoding.mapping= # Locale in which to encode mapping.
    spring.http.log-request-details=false # Whether logging of (potentially sensitive) request details at DEBUG and TRACE level is allowed.
    
    # MULTIPART (MultipartProperties)
    spring.servlet.multipart.enabled=true # Whether to enable support of multipart uploads.
    spring.servlet.multipart.file-size-threshold=0B # Threshold after which files are written to disk.
    spring.servlet.multipart.location= # Intermediate location of uploaded files.
    spring.servlet.multipart.max-file-size=1MB # Max file size.
    spring.servlet.multipart.max-request-size=10MB # Max request size.
    spring.servlet.multipart.resolve-lazily=false # Whether to resolve the multipart request lazily at the time of file or parameter access.
    
    # JACKSON (JacksonProperties)
    spring.jackson.date-format= # Date format string or a fully-qualified date format class name. For instance, `yyyy-MM-dd HH:mm:ss`.
    spring.jackson.default-property-inclusion= # Controls the inclusion of properties during serialization. Configured with one of the values in Jackson's JsonInclude.Include enumeration.
    spring.jackson.deserialization.*= # Jackson on/off features that affect the way Java objects are deserialized.
    spring.jackson.generator.*= # Jackson on/off features for generators.
    spring.jackson.joda-date-time-format= # Joda date time format string. If not configured, "date-format" is used as a fallback if it is configured with a format string.
    spring.jackson.locale= # Locale used for formatting.
    spring.jackson.mapper.*= # Jackson general purpose on/off features.
    spring.jackson.parser.*= # Jackson on/off features for parsers.
    spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.
    spring.jackson.serialization.*= # Jackson on/off features that affect the way Java objects are serialized.
    spring.jackson.time-zone= #  Time zone used when formatting dates. For instance, "America/Los_Angeles" or "GMT+10".
    spring.jackson.visibility.*= # Jackson visibility thresholds that can be used to limit which methods (and fields) are auto-detected.
    
    # GSON (GsonProperties)
    spring.gson.date-format= # Format to use when serializing Date objects.
    spring.gson.disable-html-escaping= # Whether to disable the escaping of HTML characters such as '<', '>', etc.
    spring.gson.disable-inner-class-serialization= # Whether to exclude inner classes during serialization.
    spring.gson.enable-complex-map-key-serialization= # Whether to enable serialization of complex map keys (i.e. non-primitives).
    spring.gson.exclude-fields-without-expose-annotation= # Whether to exclude all fields from consideration for serialization or deserialization that do not have the "Expose" annotation.
    spring.gson.field-naming-policy= # Naming policy that should be applied to an object's field during serialization and deserialization.
    spring.gson.generate-non-executable-json= # Whether to generate non executable JSON by prefixing the output with some special text.
    spring.gson.lenient= # Whether to be lenient about parsing JSON that doesn't conform to RFC 4627.
    spring.gson.long-serialization-policy= # Serialization policy for Long and long types.
    spring.gson.pretty-printing= # Whether to output serialized JSON that fits in a page for pretty printing.
    spring.gson.serialize-nulls= # Whether to serialize null fields.
    
    # JERSEY (JerseyProperties)
    spring.jersey.application-path= # Path that serves as the base URI for the application. If specified, overrides the value of "@ApplicationPath".
    spring.jersey.filter.order=0 # Jersey filter chain order.
    spring.jersey.init.*= # Init parameters to pass to Jersey through the servlet or filter.
    spring.jersey.servlet.load-on-startup=-1 # Load on startup priority of the Jersey servlet.
    spring.jersey.type=servlet # Jersey integration type.
    
    # SPRING LDAP (LdapProperties)
    spring.ldap.anonymous-read-only=false # Whether read-only operations should use an anonymous environment.
    spring.ldap.base= # Base suffix from which all operations should originate.
    spring.ldap.base-environment.*= # LDAP specification settings.
    spring.ldap.password= # Login password of the server.
    spring.ldap.urls= # LDAP URLs of the server.
    spring.ldap.username= # Login username of the server.
    
    # EMBEDDED LDAP (EmbeddedLdapProperties)
    spring.ldap.embedded.base-dn= # List of base DNs.
    spring.ldap.embedded.credential.username= # Embedded LDAP username.
    spring.ldap.embedded.credential.password= # Embedded LDAP password.
    spring.ldap.embedded.ldif=classpath:schema.ldif # Schema (LDIF) script resource reference.
    spring.ldap.embedded.port=0 # Embedded LDAP port.
    spring.ldap.embedded.validation.enabled=true # Whether to enable LDAP schema validation.
    spring.ldap.embedded.validation.schema= # Path to the custom schema.
    
    # MUSTACHE TEMPLATES (MustacheAutoConfiguration)
    spring.mustache.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.mustache.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
    spring.mustache.cache=false # Whether to enable template caching.
    spring.mustache.charset=UTF-8 # Template encoding.
    spring.mustache.check-template-location=true # Whether to check that the templates location exists.
    spring.mustache.content-type=text/html # Content-Type value.
    spring.mustache.enabled=true # Whether to enable MVC view resolution for this technology.
    spring.mustache.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
    spring.mustache.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
    spring.mustache.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
    spring.mustache.prefix=classpath:/templates/ # Prefix to apply to template names.
    spring.mustache.request-context-attribute= # Name of the RequestContext attribute for all views.
    spring.mustache.suffix=.mustache # Suffix to apply to template names.
    spring.mustache.view-names= # White list of view names that can be resolved.
    
    # SPRING MVC (WebMvcProperties)
    spring.mvc.async.request-timeout= # Amount of time before asynchronous request handling times out.
    spring.mvc.contentnegotiation.favor-parameter=false # Whether a request parameter ("format" by default) should be used to determine the requested media type.
    spring.mvc.contentnegotiation.favor-path-extension=false # Whether the path extension in the URL path should be used to determine the requested media type.
    spring.mvc.contentnegotiation.media-types.*= # Map file extensions to media types for content negotiation. For instance, yml to text/yaml.
    spring.mvc.contentnegotiation.parameter-name= # Query parameter name to use when "favor-parameter" is enabled.
    spring.mvc.date-format= # Date format to use. For instance, `dd/MM/yyyy`.
    spring.mvc.dispatch-trace-request=false # Whether to dispatch TRACE requests to the FrameworkServlet doService method.
    spring.mvc.dispatch-options-request=true # Whether to dispatch OPTIONS requests to the FrameworkServlet doService method.
    spring.mvc.favicon.enabled=true # Whether to enable resolution of favicon.ico.
    spring.mvc.formcontent.filter.enabled=true # Whether to enable Spring's FormContentFilter.
    spring.mvc.hiddenmethod.filter.enabled=true # Whether to enable Spring's HiddenHttpMethodFilter.
    spring.mvc.ignore-default-model-on-redirect=true # Whether the content of the "default" model should be ignored during redirect scenarios.
    spring.mvc.locale= # Locale to use. By default, this locale is overridden by the "Accept-Language" header.
    spring.mvc.locale-resolver=accept-header # Define how the locale should be resolved.
    spring.mvc.log-resolved-exception=false # Whether to enable warn logging of exceptions resolved by a "HandlerExceptionResolver", except for "DefaultHandlerExceptionResolver".
    spring.mvc.message-codes-resolver-format= # Formatting strategy for message codes. For instance, `PREFIX_ERROR_CODE`.
    spring.mvc.pathmatch.use-registered-suffix-pattern=false # Whether suffix pattern matching should work only against extensions registered with "spring.mvc.contentnegotiation.media-types.*".
    spring.mvc.pathmatch.use-suffix-pattern=false # Whether to use suffix pattern match (".*") when matching patterns to requests.
    spring.mvc.servlet.load-on-startup=-1 # Load on startup priority of the dispatcher servlet.
    spring.mvc.servlet.path=/ # Path of the dispatcher servlet.
    spring.mvc.static-path-pattern=/** # Path pattern used for static resources.
    spring.mvc.throw-exception-if-no-handler-found=false # Whether a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.
    spring.mvc.view.prefix= # Spring MVC view prefix.
    spring.mvc.view.suffix= # Spring MVC view suffix.
    
    # SPRING RESOURCES HANDLING (ResourceProperties)
    spring.resources.add-mappings=true # Whether to enable default resource handling.
    spring.resources.cache.cachecontrol.cache-private= # Indicate that the response message is intended for a single user and must not be stored by a shared cache.
    spring.resources.cache.cachecontrol.cache-public= # Indicate that any cache may store the response.
    spring.resources.cache.cachecontrol.max-age= # Maximum time the response should be cached, in seconds if no duration suffix is not specified.
    spring.resources.cache.cachecontrol.must-revalidate= # Indicate that once it has become stale, a cache must not use the response without re-validating it with the server.
    spring.resources.cache.cachecontrol.no-cache= # Indicate that the cached response can be reused only if re-validated with the server.
    spring.resources.cache.cachecontrol.no-store= # Indicate to not cache the response in any case.
    spring.resources.cache.cachecontrol.no-transform= # Indicate intermediaries (caches and others) that they should not transform the response content.
    spring.resources.cache.cachecontrol.proxy-revalidate= # Same meaning as the "must-revalidate" directive, except that it does not apply to private caches.
    spring.resources.cache.cachecontrol.s-max-age= # Maximum time the response should be cached by shared caches, in seconds if no duration suffix is not specified.
    spring.resources.cache.cachecontrol.stale-if-error= # Maximum time the response may be used when errors are encountered, in seconds if no duration suffix is not specified.
    spring.resources.cache.cachecontrol.stale-while-revalidate= # Maximum time the response can be served after it becomes stale, in seconds if no duration suffix is not specified.
    spring.resources.cache.period= # Cache period for the resources served by the resource handler. If a duration suffix is not specified, seconds will be used.
    spring.resources.chain.cache=true # Whether to enable caching in the Resource chain.
    spring.resources.chain.compressed=false # Whether to enable resolution of already compressed resources (gzip, brotli).
    spring.resources.chain.enabled= # Whether to enable the Spring Resource Handling chain. By default, disabled unless at least one strategy has been enabled.
    spring.resources.chain.html-application-cache=false # Whether to enable HTML5 application cache manifest rewriting.
    spring.resources.chain.strategy.content.enabled=false # Whether to enable the content Version Strategy.
    spring.resources.chain.strategy.content.paths=/** # Comma-separated list of patterns to apply to the content Version Strategy.
    spring.resources.chain.strategy.fixed.enabled=false # Whether to enable the fixed Version Strategy.
    spring.resources.chain.strategy.fixed.paths=/** # Comma-separated list of patterns to apply to the fixed Version Strategy.
    spring.resources.chain.strategy.fixed.version= # Version string to use for the fixed Version Strategy.
    spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ # Locations of static resources.
    
    # SPRING SESSION (SessionProperties)
    spring.session.store-type= # Session store type.
    spring.session.timeout= # Session timeout. If a duration suffix is not specified, seconds will be used.
    spring.session.servlet.filter-order=-2147483598 # Session repository filter order.
    spring.session.servlet.filter-dispatcher-types=async,error,request # Session repository filter dispatcher types.
    
    # SPRING SESSION HAZELCAST (HazelcastSessionProperties)
    spring.session.hazelcast.flush-mode=on-save # Sessions flush mode.
    spring.session.hazelcast.map-name=spring:session:sessions # Name of the map used to store sessions.
    
    # SPRING SESSION JDBC (JdbcSessionProperties)
    spring.session.jdbc.cleanup-cron=0 * * * * * # Cron expression for expired session cleanup job.
    spring.session.jdbc.initialize-schema=embedded # Database schema initialization mode.
    spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
    spring.session.jdbc.table-name=SPRING_SESSION # Name of the database table used to store sessions.
    
    # SPRING SESSION MONGODB (MongoSessionProperties)
    spring.session.mongodb.collection-name=sessions # Collection name used to store sessions.
    
    # SPRING SESSION REDIS (RedisSessionProperties)
    spring.session.redis.cleanup-cron=0 * * * * * # Cron expression for expired session cleanup job.
    spring.session.redis.flush-mode=on-save # Sessions flush mode.
    spring.session.redis.namespace=spring:session # Namespace for keys used to store sessions.
    
    # THYMELEAF (ThymeleafAutoConfiguration)
    spring.thymeleaf.cache=true # Whether to enable template caching.
    spring.thymeleaf.check-template=true # Whether to check that the template exists before rendering it.
    spring.thymeleaf.check-template-location=true # Whether to check that the templates location exists.
    spring.thymeleaf.enabled=true # Whether to enable Thymeleaf view resolution for Web frameworks.
    spring.thymeleaf.enable-spring-el-compiler=false # Enable the SpringEL compiler in SpringEL expressions.
    spring.thymeleaf.encoding=UTF-8 # Template files encoding.
    spring.thymeleaf.excluded-view-names= # Comma-separated list of view names (patterns allowed) that should be excluded from resolution.
    spring.thymeleaf.mode=HTML # Template mode to be applied to templates. See also Thymeleaf's TemplateMode enum.
    spring.thymeleaf.prefix=classpath:/templates/ # Prefix that gets prepended to view names when building a URL.
    spring.thymeleaf.reactive.chunked-mode-view-names= # Comma-separated list of view names (patterns allowed) that should be the only ones executed in CHUNKED mode when a max chunk size is set.
    spring.thymeleaf.reactive.full-mode-view-names= # Comma-separated list of view names (patterns allowed) that should be executed in FULL mode even if a max chunk size is set.
    spring.thymeleaf.reactive.max-chunk-size=0B # Maximum size of data buffers used for writing to the response.
    spring.thymeleaf.reactive.media-types= # Media types supported by the view technology.
    spring.thymeleaf.render-hidden-markers-before-checkboxes=false # Whether hidden form inputs acting as markers for checkboxes should be rendered before the checkbox element itself.
    spring.thymeleaf.servlet.content-type=text/html # Content-Type value written to HTTP responses.
    spring.thymeleaf.servlet.produce-partial-output-while-processing=true # Whether Thymeleaf should start writing partial output as soon as possible or buffer until template processing is finished.
    spring.thymeleaf.suffix=.html # Suffix that gets appended to view names when building a URL.
    spring.thymeleaf.template-resolver-order= # Order of the template resolver in the chain.
    spring.thymeleaf.view-names= # Comma-separated list of view names (patterns allowed) that can be resolved.
    
    # SPRING WEBFLUX (WebFluxProperties)
    spring.webflux.date-format= # Date format to use. For instance, `dd/MM/yyyy`.
    spring.webflux.hiddenmethod.filter.enabled=true # Whether to enable Spring's HiddenHttpMethodFilter.
    spring.webflux.static-path-pattern=/** # Path pattern used for static resources.
    
    # SPRING WEB SERVICES (WebServicesProperties)
    spring.webservices.path=/services # Path that serves as the base URI for the services.
    spring.webservices.servlet.init= # Servlet init parameters to pass to Spring Web Services.
    spring.webservices.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.
    spring.webservices.wsdl-locations= # Comma-separated list of locations of WSDLs and accompanying XSDs to be exposed as beans.
    
    
    # ----------------------------------------
    # SECURITY PROPERTIES
    # ----------------------------------------
    # SECURITY (SecurityProperties)
    spring.security.filter.order=-100 # Security filter chain order.
    spring.security.filter.dispatcher-types=async,error,request # Security filter chain dispatcher types.
    spring.security.user.name=user # Default user name.
    spring.security.user.password= # Password for the default user name.
    spring.security.user.roles= # Granted roles for the default user name.
    
    # SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)
    spring.security.oauth2.client.provider.*= # OAuth provider details.
    spring.security.oauth2.client.registration.*= # OAuth client registrations.
    
    # SECURITY OAUTH2 RESOURCE SERVER (OAuth2ResourceServerProperties)
    spring.security.oauth2.resourceserver.jwt.jwk-set-uri= # JSON Web Key URI to use to verify the JWT token.
       spring.security.oauth2.resourceserver.jwt.issuer-uri= # URI that an OpenID Connect Provider asserts as its Issuer Identifier.
    
    # ----------------------------------------
    # DATA PROPERTIES
    # ----------------------------------------
    
    # FLYWAY (FlywayProperties)
    spring.flyway.baseline-description=<< Flyway Baseline >> # Description to tag an existing schema with when applying a baseline.
    spring.flyway.baseline-on-migrate=false # Whether to automatically call baseline when migrating a non-empty schema.
    spring.flyway.baseline-version=1 # Version to tag an existing schema with when executing baseline.
    spring.flyway.check-location=true # Whether to check that migration scripts location exists.
    spring.flyway.clean-disabled=false # Whether to disable cleaning of the database.
    spring.flyway.clean-on-validation-error=false # Whether to automatically call clean when a validation error occurs.
    spring.flyway.connect-retries=0 # Maximum number of retries when attempting to connect to the database.
    spring.flyway.enabled=true # Whether to enable flyway.
    spring.flyway.encoding=UTF-8 # Encoding of SQL migrations.
    spring.flyway.group=false # Whether to group all pending migrations together in the same transaction when applying them.
    spring.flyway.ignore-future-migrations=true # Whether to ignore future migrations when reading the schema history table.
    spring.flyway.ignore-ignored-migrations=false # Whether to ignore ignored migrations when reading the schema history table.
    spring.flyway.ignore-missing-migrations=false # Whether to ignore missing migrations when reading the schema history table.
    spring.flyway.ignore-pending-migrations=false # Whether to ignore pending migrations when reading the schema history table.
    spring.flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it.
    spring.flyway.installed-by= # Username recorded in the schema history table as having applied the migration.
    spring.flyway.locations=classpath:db/migration # Locations of migrations scripts. Can contain the special "{vendor}" placeholder to use vendor-specific locations.
    spring.flyway.mixed=false # Whether to allow mixing transactional and non-transactional statements within the same migration.
    spring.flyway.out-of-order=false # Whether to allow migrations to be run out of order.
    spring.flyway.password= # Login password of the database to migrate.
    spring.flyway.placeholder-prefix=${ # Prefix of placeholders in migration scripts.
    spring.flyway.placeholder-replacement=true # Perform placeholder replacement in migration scripts.
    spring.flyway.placeholder-suffix=} # Suffix of placeholders in migration scripts.
    spring.flyway.placeholders= # Placeholders and their replacements to apply to sql migration scripts.
    spring.flyway.repeatable-sql-migration-prefix=R # File name prefix for repeatable SQL migrations.
    spring.flyway.schemas= # Scheme names managed by Flyway (case-sensitive).
    spring.flyway.skip-default-callbacks=false # Whether to skip default callbacks. If true, only custom callbacks are used.
    spring.flyway.skip-default-resolvers=false # Whether to skip default resolvers. If true, only custom resolvers are used.
    spring.flyway.sql-migration-prefix=V # File name prefix for SQL migrations.
    spring.flyway.sql-migration-separator=__ # File name separator for SQL migrations.
    spring.flyway.sql-migration-suffixes=.sql # File name suffix for SQL migrations.
    spring.flyway.table=flyway_schema_history # Name of the schema schema history table that will be used by Flyway.
    spring.flyway.target= # Target version up to which migrations should be considered.
    spring.flyway.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.
    spring.flyway.user= # Login user of the database to migrate.
    spring.flyway.validate-on-migrate=true # Whether to automatically call validate when performing a migration.
    
    # LIQUIBASE (LiquibaseProperties)
    spring.liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml # Change log configuration path.
    spring.liquibase.check-change-log-location=true # Whether to check that the change log location exists.
    spring.liquibase.contexts= # Comma-separated list of runtime contexts to use.
    spring.liquibase.database-change-log-lock-table=DATABASECHANGELOGLOCK # Name of table to use for tracking concurrent Liquibase usage.
    spring.liquibase.database-change-log-table=DATABASECHANGELOG # Name of table to use for tracking change history.
    spring.liquibase.default-schema= # Default database schema.
    spring.liquibase.drop-first=false # Whether to first drop the database schema.
    spring.liquibase.enabled=true # Whether to enable Liquibase support.
    spring.liquibase.labels= # Comma-separated list of runtime labels to use.
    spring.liquibase.liquibase-schema= # Schema to use for Liquibase objects.
    spring.liquibase.liquibase-tablespace= # Tablespace to use for Liquibase objects.
    spring.liquibase.parameters.*= # Change log parameters.
    spring.liquibase.password= # Login password of the database to migrate.
    spring.liquibase.rollback-file= # File to which rollback SQL is written when an update is performed.
    spring.liquibase.test-rollback-on-update=false # Whether rollback should be tested before update is performed.
    spring.liquibase.url= # JDBC URL of the database to migrate. If not set, the primary configured data source is used.
    spring.liquibase.user= # Login user of the database to migrate.
    
    # COUCHBASE (CouchbaseProperties)
    spring.couchbase.bootstrap-hosts= # Couchbase nodes (host or IP address) to bootstrap from.
    spring.couchbase.bucket.name=default # Name of the bucket to connect to.
    spring.couchbase.bucket.password=  # Password of the bucket.
    spring.couchbase.env.endpoints.key-value=1 # Number of sockets per node against the key/value service.
    spring.couchbase.env.endpoints.queryservice.min-endpoints=1 # Minimum number of sockets per node.
    spring.couchbase.env.endpoints.queryservice.max-endpoints=1 # Maximum number of sockets per node.
    spring.couchbase.env.endpoints.viewservice.min-endpoints=1 # Minimum number of sockets per node.
    spring.couchbase.env.endpoints.viewservice.max-endpoints=1 # Maximum number of sockets per node.
    spring.couchbase.env.ssl.enabled= # Whether to enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.
    spring.couchbase.env.ssl.key-store= # Path to the JVM key store that holds the certificates.
    spring.couchbase.env.ssl.key-store-password= # Password used to access the key store.
    spring.couchbase.env.timeouts.connect=5000ms # Bucket connections timeouts.
    spring.couchbase.env.timeouts.key-value=2500ms # Blocking operations performed on a specific key timeout.
    spring.couchbase.env.timeouts.query=7500ms # N1QL query operations timeout.
    spring.couchbase.env.timeouts.socket-connect=1000ms # Socket connect connections timeout.
    spring.couchbase.env.timeouts.view=7500ms # Regular and geospatial view operations timeout.
    
    # DAO (PersistenceExceptionTranslationAutoConfiguration)
    spring.dao.exceptiontranslation.enabled=true # Whether to enable the PersistenceExceptionTranslationPostProcessor.
    
    # CASSANDRA (CassandraProperties)
    spring.data.cassandra.cluster-name= # Name of the Cassandra cluster.
    spring.data.cassandra.compression=none # Compression supported by the Cassandra binary protocol.
    spring.data.cassandra.connect-timeout= # Socket option: connection time out.
    spring.data.cassandra.consistency-level= # Queries consistency level.
    spring.data.cassandra.contact-points=localhost # Cluster node addresses.
    spring.data.cassandra.fetch-size= # Queries default fetch size.
    spring.data.cassandra.jmx-enabled=false # Whether to enable JMX reporting.
    spring.data.cassandra.keyspace-name= # Keyspace name to use.
    spring.data.cassandra.port= # Port of the Cassandra server.
    spring.data.cassandra.password= # Login password of the server.
    spring.data.cassandra.pool.heartbeat-interval=30s # Heartbeat interval after which a message is sent on an idle connection to make sure it's still alive. If a duration suffix is not specified, seconds will be used.
    spring.data.cassandra.pool.idle-timeout=120s # Idle timeout before an idle connection is removed. If a duration suffix is not specified, seconds will be used.
    spring.data.cassandra.pool.max-queue-size=256 # Maximum number of requests that get queued if no connection is available.
    spring.data.cassandra.pool.pool-timeout=5000ms # Pool timeout when trying to acquire a connection from a host's pool.
    spring.data.cassandra.read-timeout= # Socket option: read time out.
    spring.data.cassandra.repositories.type=auto # Type of Cassandra repositories to enable.
    spring.data.cassandra.serial-consistency-level= # Queries serial consistency level.
    spring.data.cassandra.schema-action=none # Schema action to take at startup.
    spring.data.cassandra.ssl=false # Enable SSL support.
    spring.data.cassandra.username= # Login user of the server.
    
    # DATA COUCHBASE (CouchbaseDataProperties)
    spring.data.couchbase.auto-index=false # Automatically create views and indexes.
    spring.data.couchbase.consistency=read-your-own-writes # Consistency to apply by default on generated queries.
    spring.data.couchbase.repositories.type=auto # Type of Couchbase repositories to enable.
    
    # ELASTICSEARCH (ElasticsearchProperties)
    spring.data.elasticsearch.cluster-name=elasticsearch # Elasticsearch cluster name.
    spring.data.elasticsearch.cluster-nodes= # Comma-separated list of cluster node addresses.
    spring.data.elasticsearch.properties.*= # Additional properties used to configure the client.
    spring.data.elasticsearch.repositories.enabled=true # Whether to enable Elasticsearch repositories.
    
    # DATA JDBC
    spring.data.jdbc.repositories.enabled=true # Whether to enable JDBC repositories.
    
    # DATA LDAP
    spring.data.ldap.repositories.enabled=true # Whether to enable LDAP repositories.
    
    # MONGODB (MongoProperties)
    spring.data.mongodb.authentication-database= # Authentication database name.
    spring.data.mongodb.database= # Database name.
    spring.data.mongodb.field-naming-strategy= # Fully qualified name of the FieldNamingStrategy to use.
    spring.data.mongodb.grid-fs-database= # GridFS database name.
    spring.data.mongodb.host= # Mongo server host. Cannot be set with URI.
    spring.data.mongodb.password= # Login password of the mongo server. Cannot be set with URI.
    spring.data.mongodb.port= # Mongo server port. Cannot be set with URI.
    spring.data.mongodb.repositories.type=auto # Type of Mongo repositories to enable.
    spring.data.mongodb.uri=mongodb://localhost/test # Mongo database URI. Cannot be set with host, port and credentials.
    spring.data.mongodb.username= # Login user of the mongo server. Cannot be set with URI.
    
    # DATA REDIS
    spring.data.redis.repositories.enabled=true # Whether to enable Redis repositories.
    
    # NEO4J (Neo4jProperties)
    spring.data.neo4j.auto-index=none # Auto index mode.
    spring.data.neo4j.embedded.enabled=true # Whether to enable embedded mode if the embedded driver is available.
    spring.data.neo4j.open-in-view=true # Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.
    spring.data.neo4j.password= # Login password of the server.
    spring.data.neo4j.repositories.enabled=true # Whether to enable Neo4j repositories.
    spring.data.neo4j.uri= # URI used by the driver. Auto-detected by default.
    spring.data.neo4j.username= # Login user of the server.
    
    # DATA REST (RepositoryRestProperties)
    spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources.
    spring.data.rest.default-media-type= # Content type to use as a default when none is specified.
    spring.data.rest.default-page-size= # Default size of pages.
    spring.data.rest.detection-strategy=default # Strategy to use to determine which repositories get exposed.
    spring.data.rest.enable-enum-translation= # Whether to enable enum value translation through the Spring Data REST default resource bundle.
    spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once.
    spring.data.rest.max-page-size= # Maximum size of pages.
    spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return.
    spring.data.rest.return-body-on-create= # Whether to return a response body after creating an entity.
    spring.data.rest.return-body-on-update= # Whether to return a response body after updating an entity.
    spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results.
    
    # SOLR (SolrProperties)
    spring.data.solr.host=http://127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set.
    spring.data.solr.repositories.enabled=true # Whether to enable Solr repositories.
    spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT.
    
    # DATA WEB (SpringDataWebProperties)
    spring.data.web.pageable.default-page-size=20 # Default page size.
    spring.data.web.pageable.max-page-size=2000 # Maximum page size to be accepted.
    spring.data.web.pageable.one-indexed-parameters=false # Whether to expose and assume 1-based page number indexes.
    spring.data.web.pageable.page-parameter=page # Page index parameter name.
    spring.data.web.pageable.prefix= # General prefix to be prepended to the page number and page size parameters.
    spring.data.web.pageable.qualifier-delimiter=_ # Delimiter to be used between the qualifier and the actual page number and size properties.
    spring.data.web.pageable.size-parameter=size # Page size parameter name.
    spring.data.web.sort.sort-parameter=sort # Sort parameter name.
    
    # DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)
    spring.datasource.continue-on-error=false # Whether to stop if an error occurs while initializing the database.
    spring.datasource.data= # Data (DML) script resource references.
    spring.datasource.data-username= # Username of the database to execute DML scripts (if different).
    spring.datasource.data-password= # Password of the database to execute DML scripts (if different).
    spring.datasource.dbcp2.*= # Commons DBCP2 specific settings
    spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.
    spring.datasource.generate-unique-name=false # Whether to generate a random datasource name.
    spring.datasource.hikari.*= # Hikari specific settings
    spring.datasource.initialization-mode=embedded # Initialize the datasource with available DDL and DML scripts.
    spring.datasource.jmx-enabled=false # Whether to enable JMX support (if provided by the underlying pool).
    spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set.
    spring.datasource.name= # Name of the datasource. Default to "testdb" when using an embedded database.
    spring.datasource.password= # Login password of the database.
    spring.datasource.platform=all # Platform to use in the DDL or DML scripts (such as schema-${platform}.sql or data-${platform}.sql).
    spring.datasource.schema= # Schema (DDL) script resource references.
    spring.datasource.schema-username= # Username of the database to execute DDL scripts (if different).
    spring.datasource.schema-password= # Password of the database to execute DDL scripts (if different).
    spring.datasource.separator=; # Statement separator in SQL initialization scripts.
    spring.datasource.sql-script-encoding= # SQL scripts encoding.
    spring.datasource.tomcat.*= # Tomcat datasource specific settings
    spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.
    spring.datasource.url= # JDBC URL of the database.
    spring.datasource.username= # Login username of the database.
    spring.datasource.xa.data-source-class-name= # XA datasource fully qualified name.
    spring.datasource.xa.properties= # Properties to pass to the XA data source.
    
    # JEST (Elasticsearch HTTP client) (JestProperties)
    spring.elasticsearch.jest.connection-timeout=3s # Connection timeout.
    spring.elasticsearch.jest.multi-threaded=true # Whether to enable connection requests from multiple execution threads.
    spring.elasticsearch.jest.password= # Login password.
    spring.elasticsearch.jest.proxy.host= # Proxy host the HTTP client should use.
    spring.elasticsearch.jest.proxy.port= # Proxy port the HTTP client should use.
    spring.elasticsearch.jest.read-timeout=3s # Read timeout.
    spring.elasticsearch.jest.uris=http://localhost:9200 # Comma-separated list of the Elasticsearch instances to use.
    spring.elasticsearch.jest.username= # Login username.
    
    # Elasticsearch REST clients (RestClientProperties)
    spring.elasticsearch.rest.password= # Credentials password.
       spring.elasticsearch.rest.uris=http://localhost:9200 # Comma-separated list of the Elasticsearch instances to use.
       spring.elasticsearch.rest.username= # Credentials username.
    
    # H2 Web Console (H2ConsoleProperties)
    spring.h2.console.enabled=false # Whether to enable the console.
    spring.h2.console.path=/h2-console # Path at which the console is available.
    spring.h2.console.settings.trace=false # Whether to enable trace output.
    spring.h2.console.settings.web-allow-others=false # Whether to enable remote access.
    
    # InfluxDB (InfluxDbProperties)
    spring.influx.password= # Login password.
    spring.influx.url= # URL of the InfluxDB instance to which to connect.
    spring.influx.user= # Login user.
    
    # JOOQ (JooqProperties)
    spring.jooq.sql-dialect= # SQL dialect to use. Auto-detected by default.
    
    # JDBC (JdbcProperties)
    spring.jdbc.template.fetch-size=-1 # Number of rows that should be fetched from the database when more rows are needed.
    spring.jdbc.template.max-rows=-1 # Maximum number of rows.
    spring.jdbc.template.query-timeout= # Query timeout. Default is to use the JDBC driver's default configuration. If a duration suffix is not specified, seconds will be used.
    
    # JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)
    spring.data.jpa.repositories.bootstrap-mode=default # Bootstrap mode for JPA repositories.
    spring.data.jpa.repositories.enabled=true # Whether to enable JPA repositories.
    spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.
    spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.
    spring.jpa.generate-ddl=false # Whether to initialize the schema on startup.
    spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Defaults to "create-drop" when using an embedded database and no schema manager was detected. Otherwise, defaults to "none".
    spring.jpa.hibernate.naming.implicit-strategy= # Fully qualified name of the implicit naming strategy.
    spring.jpa.hibernate.naming.physical-strategy= # Fully qualified name of the physical naming strategy.
    spring.jpa.hibernate.use-new-id-generator-mappings= # Whether to use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.
    spring.jpa.mapping-resources= # Mapping resources (equivalent to "mapping-file" entries in persistence.xml).
    spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.
    spring.jpa.properties.*= # Additional native properties to set on the JPA provider.
    spring.jpa.show-sql=false # Whether to enable logging of SQL statements.
    
    # JTA (JtaAutoConfiguration)
    spring.jta.enabled=true # Whether to enable JTA support.
    spring.jta.log-dir= # Transaction logs directory.
    spring.jta.transaction-manager-id= # Transaction manager unique identifier.
    
    # ATOMIKOS (AtomikosProperties)
    spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
    spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether to ignore the transacted flag when creating session.
    spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether local transactions are desired.
    spring.jta.atomikos.connectionfactory.maintenance-interval=60 # Time, in seconds, between runs of the pool's maintenance thread.
    spring.jta.atomikos.connectionfactory.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
    spring.jta.atomikos.connectionfactory.max-lifetime=0 # Time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
    spring.jta.atomikos.connectionfactory.max-pool-size=1 # Maximum size of the pool.
    spring.jta.atomikos.connectionfactory.min-pool-size=1 # Minimum size of the pool.
    spring.jta.atomikos.connectionfactory.reap-timeout=0 # Reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
    spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # Unique name used to identify the resource during recovery.
    spring.jta.atomikos.connectionfactory.xa-connection-factory-class-name= # Vendor-specific implementation of XAConnectionFactory.
    spring.jta.atomikos.connectionfactory.xa-properties= # Vendor-specific XA properties.
    spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
    spring.jta.atomikos.datasource.concurrent-connection-validation=true # Whether to use concurrent connection validation.
    spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool.
    spring.jta.atomikos.datasource.login-timeout=0 # Timeout, in seconds, for establishing a database connection.
    spring.jta.atomikos.datasource.maintenance-interval=60 # Time, in seconds, between runs of the pool's maintenance thread.
    spring.jta.atomikos.datasource.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
    spring.jta.atomikos.datasource.max-lifetime=0 # Time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
    spring.jta.atomikos.datasource.max-pool-size=1 # Maximum size of the pool.
    spring.jta.atomikos.datasource.min-pool-size=1 # Minimum size of the pool.
    spring.jta.atomikos.datasource.reap-timeout=0 # Reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
    spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
    spring.jta.atomikos.datasource.unique-resource-name=dataSource # Unique name used to identify the resource during recovery.
    spring.jta.atomikos.datasource.xa-data-source-class-name= # Vendor-specific implementation of XAConnectionFactory.
    spring.jta.atomikos.datasource.xa-properties= # Vendor-specific XA properties.
    spring.jta.atomikos.properties.allow-sub-transactions=true # Specify whether sub-transactions are allowed.
    spring.jta.atomikos.properties.checkpoint-interval=500 # Interval between checkpoints, expressed as the number of log writes between two checkpoints.
    spring.jta.atomikos.properties.default-jta-timeout=10000ms # Default timeout for JTA transactions.
    spring.jta.atomikos.properties.default-max-wait-time-on-shutdown=9223372036854775807 # How long should normal shutdown (no-force) wait for transactions to complete.
    spring.jta.atomikos.properties.enable-logging=true # Whether to enable disk logging.
    spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false # Whether a VM shutdown should trigger forced shutdown of the transaction core.
    spring.jta.atomikos.properties.log-base-dir= # Directory in which the log files should be stored.
    spring.jta.atomikos.properties.log-base-name=tmlog # Transactions log file base name.
    spring.jta.atomikos.properties.max-actives=50 # Maximum number of active transactions.
    spring.jta.atomikos.properties.max-timeout=300000ms # Maximum timeout that can be allowed for transactions.
    spring.jta.atomikos.properties.recovery.delay=10000ms # Delay between two recovery scans.
    spring.jta.atomikos.properties.recovery.forget-orphaned-log-entries-delay=86400000ms # Delay after which recovery can cleanup pending ('orphaned') log entries.
    spring.jta.atomikos.properties.recovery.max-retries=5 # Number of retry attempts to commit the transaction before throwing an exception.
    spring.jta.atomikos.properties.recovery.retry-interval=10000ms # Delay between retry attempts.
    spring.jta.atomikos.properties.serial-jta-transactions=true # Whether sub-transactions should be joined when possible.
    spring.jta.atomikos.properties.service= # Transaction manager implementation that should be started.
    spring.jta.atomikos.properties.threaded-two-phase-commit=false # Whether to use different (and concurrent) threads for two-phase commit on the participating resources.
    spring.jta.atomikos.properties.transaction-manager-unique-name= # The transaction manager's unique name.
    
    # BITRONIX
    spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool.
    spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
    spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
    spring.jta.bitronix.connectionfactory.allow-local-transactions=false # Whether the transaction manager should allow mixing XA and non-XA transactions.
    spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
    spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
    spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether producers and consumers should be cached.
    spring.jta.bitronix.connectionfactory.class-name= # Underlying implementation class name of the XA resource.
    spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether the provider can run many transactions on the same connection and supports transaction interleaving.
    spring.jta.bitronix.connectionfactory.disabled=false # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
    spring.jta.bitronix.connectionfactory.driver-properties= # Properties that should be set on the underlying implementation.
    spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether recovery failures should be ignored.
    spring.jta.bitronix.connectionfactory.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
    spring.jta.bitronix.connectionfactory.max-pool-size=0 # Maximum size of the pool. 0 denotes no limit.
    spring.jta.bitronix.connectionfactory.min-pool-size=0 # Minimum size of the pool.
    spring.jta.bitronix.connectionfactory.password= # Password to use to connect to the JMS provider.
    spring.jta.bitronix.connectionfactory.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
    spring.jta.bitronix.connectionfactory.test-connections=false # Whether connections should be tested when acquired from the pool.
    spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # Position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
    spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # Unique name used to identify the resource during recovery.
    spring.jta.bitronix.connectionfactory.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
    spring.jta.bitronix.connectionfactory.user= # User to use to connect to the JMS provider.
    spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool.
    spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
    spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
    spring.jta.bitronix.datasource.allow-local-transactions=false # Whether the transaction manager should allow mixing XA and non-XA transactions.
    spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
    spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
    spring.jta.bitronix.datasource.class-name= # Underlying implementation class name of the XA resource.
    spring.jta.bitronix.datasource.cursor-holdability= # Default cursor holdability for connections.
    spring.jta.bitronix.datasource.defer-connection-release=true # Whether the database can run many transactions on the same connection and supports transaction interleaving.
    spring.jta.bitronix.datasource.disabled=false # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
    spring.jta.bitronix.datasource.driver-properties= # Properties that should be set on the underlying implementation.
    spring.jta.bitronix.datasource.enable-jdbc4-connection-test=false # Whether Connection.isValid() is called when acquiring a connection from the pool.
    spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether recovery failures should be ignored.
    spring.jta.bitronix.datasource.isolation-level= # Default isolation level for connections.
    spring.jta.bitronix.datasource.local-auto-commit= # Default auto-commit mode for local transactions.
    spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
    spring.jta.bitronix.datasource.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
    spring.jta.bitronix.datasource.max-pool-size=0 # Maximum size of the pool. 0 denotes no limit.
    spring.jta.bitronix.datasource.min-pool-size=0 # Minimum size of the pool.
    spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # Target size of the prepared statement cache. 0 disables the cache.
    spring.jta.bitronix.datasource.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
    spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
    spring.jta.bitronix.datasource.two-pc-ordering-position=1 # Position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, and always last is Integer.MAX_VALUE).
    spring.jta.bitronix.datasource.unique-name=dataSource # Unique name used to identify the resource during recovery.
    spring.jta.bitronix.datasource.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
    spring.jta.bitronix.properties.allow-multiple-lrc=false # Whether to allow multiple LRC resources to be enlisted into the same transaction.
    spring.jta.bitronix.properties.asynchronous2-pc=false # Whether to enable asynchronously execution of two phase commit.
    spring.jta.bitronix.properties.background-recovery-interval-seconds=60 # Interval in seconds at which to run the recovery process in the background.
    spring.jta.bitronix.properties.current-node-only-recovery=true # Whether to recover only the current node.
    spring.jta.bitronix.properties.debug-zero-resource-transaction=false # Whether to log the creation and commit call stacks of transactions executed without a single enlisted resource.
    spring.jta.bitronix.properties.default-transaction-timeout=60 # Default transaction timeout, in seconds.
    spring.jta.bitronix.properties.disable-jmx=false # Whether to enable JMX support.
    spring.jta.bitronix.properties.exception-analyzer= # Set the fully qualified name of the exception analyzer implementation to use.
    spring.jta.bitronix.properties.filter-log-status=false # Whether to enable filtering of logs so that only mandatory logs are written.
    spring.jta.bitronix.properties.force-batching-enabled=true #  Whether disk forces are batched.
    spring.jta.bitronix.properties.forced-write-enabled=true # Whether logs are forced to disk.
    spring.jta.bitronix.properties.graceful-shutdown-interval=60 # Maximum amount of seconds the TM waits for transactions to get done before aborting them at shutdown time.
    spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= # JNDI name of the TransactionSynchronizationRegistry.
    spring.jta.bitronix.properties.jndi-user-transaction-name= # JNDI name of the UserTransaction.
    spring.jta.bitronix.properties.journal=disk # Name of the journal. Can be 'disk', 'null', or a class name.
    spring.jta.bitronix.properties.log-part1-filename=btm1.tlog # Name of the first fragment of the journal.
    spring.jta.bitronix.properties.log-part2-filename=btm2.tlog # Name of the second fragment of the journal.
    spring.jta.bitronix.properties.max-log-size-in-mb=2 # Maximum size in megabytes of the journal fragments.
    spring.jta.bitronix.properties.resource-configuration-filename= # ResourceLoader configuration file name.
    spring.jta.bitronix.properties.server-id= # ASCII ID that must uniquely identify this TM instance. Defaults to the machine's IP address.
    spring.jta.bitronix.properties.skip-corrupted-logs=false # Skip corrupted transactions log entries.
    spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true # Whether to log a warning for transactions executed without a single enlisted resource.
    
    # EMBEDDED MONGODB (EmbeddedMongoProperties)
    spring.mongodb.embedded.features=sync_delay # Comma-separated list of features to enable.
    spring.mongodb.embedded.storage.database-dir= # Directory used for data storage.
    spring.mongodb.embedded.storage.oplog-size= # Maximum size of the oplog.
    spring.mongodb.embedded.storage.repl-set-name= # Name of the replica set.
    spring.mongodb.embedded.version=3.5.5 # Version of Mongo to use.
    
    # REDIS (RedisProperties)
    spring.redis.cluster.max-redirects= # Maximum number of redirects to follow when executing commands across the cluster.
    spring.redis.cluster.nodes= # Comma-separated list of "host:port" pairs to bootstrap from.
    spring.redis.database=0 # Database index used by the connection factory.
    spring.redis.url= # Connection URL. Overrides host, port, and password. User is ignored. Example: redis://user:password@example.com:6379
    spring.redis.host=localhost # Redis server host.
    spring.redis.jedis.pool.max-active=8 # Maximum number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
    spring.redis.jedis.pool.max-idle=8 # Maximum number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
    spring.redis.jedis.pool.max-wait=-1ms # Maximum amount of time a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
    spring.redis.jedis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
    spring.redis.lettuce.pool.max-active=8 # Maximum number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
    spring.redis.lettuce.pool.max-idle=8 # Maximum number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
    spring.redis.lettuce.pool.max-wait=-1ms # Maximum amount of time a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
    spring.redis.lettuce.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
    spring.redis.lettuce.shutdown-timeout=100ms # Shutdown timeout.
    spring.redis.password= # Login password of the redis server.
    spring.redis.port=6379 # Redis server port.
    spring.redis.sentinel.master= # Name of the Redis server.
    spring.redis.sentinel.nodes= # Comma-separated list of "host:port" pairs.
    spring.redis.ssl=false # Whether to enable SSL support.
    spring.redis.timeout= # Connection timeout.
    
    # TRANSACTION (TransactionProperties)
    spring.transaction.default-timeout= # Default transaction timeout. If a duration suffix is not specified, seconds will be used.
    spring.transaction.rollback-on-commit-failure= # Whether to roll back on commit failures.
    
    
    
    # ----------------------------------------
    # INTEGRATION PROPERTIES
    # ----------------------------------------
    
    # ACTIVEMQ (ActiveMQProperties)
    spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default.
    spring.activemq.close-timeout=15s # Time to wait before considering a close complete.
    spring.activemq.in-memory=true # Whether the default broker URL should be in memory. Ignored if an explicit broker has been specified.
    spring.activemq.non-blocking-redelivery=false # Whether to stop message delivery before re-delivering messages from a rolled back transaction. This implies that message order is not preserved when this is enabled.
    spring.activemq.password= # Login password of the broker.
    spring.activemq.send-timeout=0ms # Time to wait on message sends for a response. Set it to 0 to wait forever.
    spring.activemq.user= # Login user of the broker.
    spring.activemq.packages.trust-all= # Whether to trust all packages.
    spring.activemq.packages.trusted= # Comma-separated list of specific packages to trust (when not trusting all packages).
    spring.activemq.pool.block-if-full=true # Whether to block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead.
    spring.activemq.pool.block-if-full-timeout=-1ms # Blocking period before throwing an exception if the pool is still full.
    spring.activemq.pool.enabled=false # Whether a JmsPoolConnectionFactory should be created, instead of a regular ConnectionFactory.
    spring.activemq.pool.idle-timeout=30s # Connection idle timeout.
    spring.activemq.pool.max-connections=1 # Maximum number of pooled connections.
    spring.activemq.pool.max-sessions-per-connection=500 # Maximum number of pooled sessions per connection in the pool.
    spring.activemq.pool.time-between-expiration-check=-1ms # Time to sleep between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs.
    spring.activemq.pool.use-anonymous-producers=true # Whether to use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required.
    
    # ARTEMIS (ArtemisProperties)
    spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default.
    spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off.
    spring.artemis.embedded.enabled=true # Whether to enable embedded mode if the Artemis server APIs are available.
    spring.artemis.embedded.persistent=false # Whether to enable persistent store.
    spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup.
    spring.artemis.embedded.server-id= # Server ID. By default, an auto-incremented counter is used.
    spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup.
    spring.artemis.host=localhost # Artemis broker host.
    spring.artemis.mode= # Artemis deployment mode, auto-detected by default.
    spring.artemis.password= # Login password of the broker.
    spring.artemis.pool.block-if-full=true # Whether to block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead.
    spring.artemis.pool.block-if-full-timeout=-1ms # Blocking period before throwing an exception if the pool is still full.
    spring.artemis.pool.enabled=false # Whether a JmsPoolConnectionFactory should be created, instead of a regular ConnectionFactory.
    spring.artemis.pool.idle-timeout=30s # Connection idle timeout.
    spring.artemis.pool.max-connections=1 # Maximum number of pooled connections.
    spring.artemis.pool.max-sessions-per-connection=500 # Maximum number of pooled sessions per connection in the pool.
    spring.artemis.pool.time-between-expiration-check=-1ms # Time to sleep between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs.
    spring.artemis.pool.use-anonymous-producers=true # Whether to use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required.
    spring.artemis.port=61616 # Artemis broker port.
    spring.artemis.user= # Login user of the broker.
    
    # SPRING BATCH (BatchProperties)
    spring.batch.initialize-schema=embedded # Database schema initialization mode.
    spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup.
    spring.batch.job.names= # Comma-separated list of job names to execute on startup (for instance, `job1,job2`). By default, all Jobs found in the context are executed.
    spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
    spring.batch.table-prefix= # Table prefix for all the batch meta-data tables.
    
    # SPRING INTEGRATION (IntegrationProperties)
    spring.integration.jdbc.initialize-schema=embedded # Database schema initialization mode.
    spring.integration.jdbc.schema=classpath:org/springframework/integration/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
    
    # JMS (JmsProperties)
    spring.jms.cache.consumers=false # Whether to cache message consumers.
    spring.jms.cache.enabled=true # Whether to cache sessions.
    spring.jms.cache.producers=true # Whether to cache message producers.
    spring.jms.cache.session-cache-size=1 # Size of the session cache (per JMS Session type).
    spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.
    spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.
    spring.jms.listener.auto-startup=true # Start the container automatically on startup.
    spring.jms.listener.concurrency= # Minimum number of concurrent consumers.
    spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers.
    spring.jms.pub-sub-domain=false # Whether the default destination type is topic.
    spring.jms.template.default-destination= # Default destination to use on send and receive operations that do not have a destination parameter.
    spring.jms.template.delivery-delay= # Delivery delay to use for send calls.
    spring.jms.template.delivery-mode= # Delivery mode. Enables QoS (Quality of Service) when set.
    spring.jms.template.priority= # Priority of a message when sending. Enables QoS (Quality of Service) when set.
    spring.jms.template.qos-enabled= # Whether to enable explicit QoS (Quality of Service) when sending a message.
    spring.jms.template.receive-timeout= # Timeout to use for receive calls.
    spring.jms.template.time-to-live= # Time-to-live of a message when sending. Enables QoS (Quality of Service) when set.
    
    # APACHE KAFKA (KafkaProperties)
    spring.kafka.admin.client-id= # ID to pass to the server when making requests. Used for server-side logging.
    spring.kafka.admin.fail-fast=false # Whether to fail fast if the broker is not available on startup.
    spring.kafka.admin.properties.*= # Additional admin-specific properties used to configure the client.
    spring.kafka.admin.ssl.key-password= # Password of the private key in the key store file.
    spring.kafka.admin.ssl.key-store-location= # Location of the key store file.
    spring.kafka.admin.ssl.key-store-password= # Store password for the key store file.
    spring.kafka.admin.ssl.key-store-type= # Type of the key store.
    spring.kafka.admin.ssl.protocol= # SSL protocol to use.
    spring.kafka.admin.ssl.trust-store-location= # Location of the trust store file.
    spring.kafka.admin.ssl.trust-store-password= # Store password for the trust store file.
    spring.kafka.admin.ssl.trust-store-type= # Type of the trust store.
    spring.kafka.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Applies to all components unless overridden.
    spring.kafka.client-id= # ID to pass to the server when making requests. Used for server-side logging.
    spring.kafka.consumer.auto-commit-interval= # Frequency with which the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' is set to true.
    spring.kafka.consumer.auto-offset-reset= # What to do when there is no initial offset in Kafka or if the current offset no longer exists on the server.
    spring.kafka.consumer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Overrides the global property, for consumers.
    spring.kafka.consumer.client-id= # ID to pass to the server when making requests. Used for server-side logging.
    spring.kafka.consumer.enable-auto-commit= # Whether the consumer's offset is periodically committed in the background.
    spring.kafka.consumer.fetch-max-wait= # Maximum amount of time the server blocks before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch-min-size".
    spring.kafka.consumer.fetch-min-size= # Minimum amount of data the server should return for a fetch request.
    spring.kafka.consumer.group-id= # Unique string that identifies the consumer group to which this consumer belongs.
    spring.kafka.consumer.heartbeat-interval= # Expected time between heartbeats to the consumer coordinator.
    spring.kafka.consumer.key-deserializer= # Deserializer class for keys.
    spring.kafka.consumer.max-poll-records= # Maximum number of records returned in a single call to poll().
    spring.kafka.consumer.properties.*= # Additional consumer-specific properties used to configure the client.
    spring.kafka.consumer.ssl.key-password= # Password of the private key in the key store file.
    spring.kafka.consumer.ssl.key-store-location= # Location of the key store file.
    spring.kafka.consumer.ssl.key-store-password= # Store password for the key store file.
    spring.kafka.consumer.ssl.key-store-type= # Type of the key store.
    spring.kafka.consumer.ssl.protocol= # SSL protocol to use.
    spring.kafka.consumer.ssl.trust-store-location= # Location of the trust store file.
    spring.kafka.consumer.ssl.trust-store-password= # Store password for the trust store file.
    spring.kafka.consumer.ssl.trust-store-type= # Type of the trust store.
    spring.kafka.consumer.value-deserializer= # Deserializer class for values.
    spring.kafka.jaas.control-flag=required # Control flag for login configuration.
    spring.kafka.jaas.enabled=false # Whether to enable JAAS configuration.
    spring.kafka.jaas.login-module=com.sun.security.auth.module.Krb5LoginModule # Login module.
    spring.kafka.jaas.options= # Additional JAAS options.
    spring.kafka.listener.ack-count= # Number of records between offset commits when ackMode is "COUNT" or "COUNT_TIME".
    spring.kafka.listener.ack-mode= # Listener AckMode. See the spring-kafka documentation.
    spring.kafka.listener.ack-time= # Time between offset commits when ackMode is "TIME" or "COUNT_TIME".
    spring.kafka.listener.client-id= # Prefix for the listener's consumer client.id property.
    spring.kafka.listener.concurrency= # Number of threads to run in the listener containers.
    spring.kafka.listener.idle-event-interval= # Time between publishing idle consumer events (no data received).
    spring.kafka.listener.log-container-config= # Whether to log the container configuration during initialization (INFO level).
    spring.kafka.listener.monitor-interval= # Time between checks for non-responsive consumers. If a duration suffix is not specified, seconds will be used.
    spring.kafka.listener.no-poll-threshold= # Multiplier applied to "pollTimeout" to determine if a consumer is non-responsive.
    spring.kafka.listener.poll-timeout= # Timeout to use when polling the consumer.
    spring.kafka.listener.type=single # Listener type.
    spring.kafka.producer.acks= # Number of acknowledgments the producer requires the leader to have received before considering a request complete.
    spring.kafka.producer.batch-size= # Default batch size.
    spring.kafka.producer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Overrides the global property, for producers.
    spring.kafka.producer.buffer-memory= # Total memory size the producer can use to buffer records waiting to be sent to the server.
    spring.kafka.producer.client-id= # ID to pass to the server when making requests. Used for server-side logging.
    spring.kafka.producer.compression-type= # Compression type for all data generated by the producer.
    spring.kafka.producer.key-serializer= # Serializer class for keys.
    spring.kafka.producer.properties.*= # Additional producer-specific properties used to configure the client.
    spring.kafka.producer.retries= # When greater than zero, enables retrying of failed sends.
    spring.kafka.producer.ssl.key-password= # Password of the private key in the key store file.
    spring.kafka.producer.ssl.key-store-location= # Location of the key store file.
    spring.kafka.producer.ssl.key-store-password= # Store password for the key store file.
    spring.kafka.producer.ssl.key-store-type= # Type of the key store.
    spring.kafka.producer.ssl.protocol= # SSL protocol to use.
    spring.kafka.producer.ssl.trust-store-location= # Location of the trust store file.
    spring.kafka.producer.ssl.trust-store-password= # Store password for the trust store file.
    spring.kafka.producer.ssl.trust-store-type= # Type of the trust store.
    spring.kafka.producer.transaction-id-prefix= # When non empty, enables transaction support for producer.
    spring.kafka.producer.value-serializer= # Serializer class for values.
    spring.kafka.properties.*= # Additional properties, common to producers and consumers, used to configure the client.
    spring.kafka.ssl.key-password= # Password of the private key in the key store file.
    spring.kafka.ssl.key-store-location= # Location of the key store file.
    spring.kafka.ssl.key-store-password= # Store password for the key store file.
    spring.kafka.ssl.key-store-type= # Type of the key store.
    spring.kafka.ssl.protocol= # SSL protocol to use.
    spring.kafka.ssl.trust-store-location= # Location of the trust store file.
    spring.kafka.ssl.trust-store-password= # Store password for the trust store file.
    spring.kafka.ssl.trust-store-type= # Type of the trust store.
    spring.kafka.streams.application-id= # Kafka streams application.id property; default spring.application.name.
    spring.kafka.streams.auto-startup=true # Whether or not to auto-start the streams factory bean.
    spring.kafka.streams.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Overrides the global property, for streams.
    spring.kafka.streams.cache-max-size-buffering= # Maximum memory size to be used for buffering across all threads.
    spring.kafka.streams.client-id= # ID to pass to the server when making requests. Used for server-side logging.
    spring.kafka.streams.properties.*= # Additional Kafka properties used to configure the streams.
    spring.kafka.streams.replication-factor= # The replication factor for change log topics and repartition topics created by the stream processing application.
    spring.kafka.streams.ssl.key-password= # Password of the private key in the key store file.
    spring.kafka.streams.ssl.key-store-location= # Location of the key store file.
    spring.kafka.streams.ssl.key-store-password= # Store password for the key store file.
    spring.kafka.streams.ssl.key-store-type= # Type of the key store.
    spring.kafka.streams.ssl.protocol= # SSL protocol to use.
    spring.kafka.streams.ssl.trust-store-location= # Location of the trust store file.
    spring.kafka.streams.ssl.trust-store-password= # Store password for the trust store file.
    spring.kafka.streams.ssl.trust-store-type= # Type of the trust store.
    spring.kafka.streams.state-dir= # Directory location for the state store.
    spring.kafka.template.default-topic= # Default topic to which messages are sent.
    
    # RABBIT (RabbitProperties)
    spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect.
    spring.rabbitmq.cache.channel.checkout-timeout= # Duration to wait to obtain a channel if the cache size has been reached.
    spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache.
    spring.rabbitmq.cache.connection.mode=channel # Connection factory cache mode.
    spring.rabbitmq.cache.connection.size= # Number of connections to cache.
    spring.rabbitmq.connection-timeout= # Connection timeout. Set it to zero to wait forever.
    spring.rabbitmq.dynamic=true # Whether to create an AmqpAdmin bean.
    spring.rabbitmq.host=localhost # RabbitMQ host.
    spring.rabbitmq.listener.direct.acknowledge-mode= # Acknowledge mode of container.
    spring.rabbitmq.listener.direct.auto-startup=true # Whether to start the container automatically on startup.
    spring.rabbitmq.listener.direct.consumers-per-queue= # Number of consumers per queue.
    spring.rabbitmq.listener.direct.default-requeue-rejected= # Whether rejected deliveries are re-queued by default.
    spring.rabbitmq.listener.direct.idle-event-interval= # How often idle container events should be published.
    spring.rabbitmq.listener.direct.missing-queues-fatal=false # Whether to fail if the queues declared by the container are not available on the broker.
    spring.rabbitmq.listener.direct.prefetch= # Maximum number of unacknowledged messages that can be outstanding at each consumer.
    spring.rabbitmq.listener.direct.retry.enabled=false # Whether publishing retries are enabled.
    spring.rabbitmq.listener.direct.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
    spring.rabbitmq.listener.direct.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
    spring.rabbitmq.listener.direct.retry.max-interval=10000ms # Maximum duration between attempts.
    spring.rabbitmq.listener.direct.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
    spring.rabbitmq.listener.direct.retry.stateless=true # Whether retries are stateless or stateful.
    spring.rabbitmq.listener.simple.acknowledge-mode= # Acknowledge mode of container.
    spring.rabbitmq.listener.simple.auto-startup=true # Whether to start the container automatically on startup.
    spring.rabbitmq.listener.simple.concurrency= # Minimum number of listener invoker threads.
    spring.rabbitmq.listener.simple.default-requeue-rejected= # Whether rejected deliveries are re-queued by default.
    spring.rabbitmq.listener.simple.idle-event-interval= # How often idle container events should be published.
    spring.rabbitmq.listener.simple.max-concurrency= # Maximum number of listener invoker threads.
    spring.rabbitmq.listener.simple.missing-queues-fatal=true # Whether to fail if the queues declared by the container are not available on the broker and/or whether to stop the container if one or more queues are deleted at runtime.
    spring.rabbitmq.listener.simple.prefetch= # Maximum number of unacknowledged messages that can be outstanding at each consumer.
    spring.rabbitmq.listener.simple.retry.enabled=false # Whether publishing retries are enabled.
    spring.rabbitmq.listener.simple.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
    spring.rabbitmq.listener.simple.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
    spring.rabbitmq.listener.simple.retry.max-interval=10000ms # Maximum duration between attempts.
    spring.rabbitmq.listener.simple.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
    spring.rabbitmq.listener.simple.retry.stateless=true # Whether retries are stateless or stateful.
    spring.rabbitmq.listener.simple.transaction-size= # Number of messages to be processed between acks when the acknowledge mode is AUTO. If larger than prefetch, prefetch will be increased to this value.
    spring.rabbitmq.listener.type=simple # Listener container type.
    spring.rabbitmq.password=guest # Login to authenticate against the broker.
    spring.rabbitmq.port=5672 # RabbitMQ port.
    spring.rabbitmq.publisher-confirms=false # Whether to enable publisher confirms.
    spring.rabbitmq.publisher-returns=false # Whether to enable publisher returns.
    spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout; zero for none. If a duration suffix is not specified, seconds will be used.
    spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default, configured by the Rabbit client library.
    spring.rabbitmq.ssl.enabled=false # Whether to enable SSL support.
    spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate.
    spring.rabbitmq.ssl.key-store-password= # Password used to access the key store.
    spring.rabbitmq.ssl.key-store-type=PKCS12 # Key store type.
    spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates.
    spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store.
    spring.rabbitmq.ssl.trust-store-type=JKS # Trust store type.
    spring.rabbitmq.ssl.validate-server-certificate=true # Whether to enable server side certificate validation.
    spring.rabbitmq.ssl.verify-hostname=true # Whether to enable hostname verification.
    spring.rabbitmq.template.default-receive-queue= # Name of the default queue to receive messages from when none is specified explicitly.
    spring.rabbitmq.template.exchange= # Name of the default exchange to use for send operations.
    spring.rabbitmq.template.mandatory= # Whether to enable mandatory messages.
    spring.rabbitmq.template.receive-timeout= # Timeout for `receive()` operations.
    spring.rabbitmq.template.reply-timeout= # Timeout for `sendAndReceive()` operations.
    spring.rabbitmq.template.retry.enabled=false # Whether publishing retries are enabled.
    spring.rabbitmq.template.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
    spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
    spring.rabbitmq.template.retry.max-interval=10000ms # Maximum duration between attempts.
    spring.rabbitmq.template.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
    spring.rabbitmq.template.routing-key= # Value of a default routing key to use for send operations.
    spring.rabbitmq.username=guest # Login user to authenticate to the broker.
    spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker.
    
    
    # ----------------------------------------
    # ACTUATOR PROPERTIES
    # ----------------------------------------
    
    # MANAGEMENT HTTP SERVER (ManagementServerProperties)
    management.server.add-application-context-header=false # Add the "X-Application-Context" HTTP header in each response.
    management.server.address= # Network address to which the management endpoints should bind. Requires a custom management.server.port.
    management.server.port= # Management endpoint HTTP port (uses the same port as the application by default). Configure a different port to use management-specific SSL.
    management.server.servlet.context-path= # Management endpoint context-path (for instance, `/management`). Requires a custom management.server.port.
    management.server.ssl.ciphers= # Supported SSL ciphers.
    management.server.ssl.client-auth= # Client authentication mode.
    management.server.ssl.enabled=true # Whether to enable SSL support.
    management.server.ssl.enabled-protocols= # Enabled SSL protocols.
    management.server.ssl.key-alias= # Alias that identifies the key in the key store.
    management.server.ssl.key-password= # Password used to access the key in the key store.
    management.server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file).
    management.server.ssl.key-store-password= # Password used to access the key store.
    management.server.ssl.key-store-provider= # Provider for the key store.
    management.server.ssl.key-store-type= # Type of the key store.
    management.server.ssl.protocol=TLS # SSL protocol to use.
    management.server.ssl.trust-store= # Trust store that holds SSL certificates.
    management.server.ssl.trust-store-password= # Password used to access the trust store.
    management.server.ssl.trust-store-provider= # Provider for the trust store.
    management.server.ssl.trust-store-type= # Type of the trust store.
    
    # CLOUDFOUNDRY
    management.cloudfoundry.enabled=true # Whether to enable extended Cloud Foundry actuator endpoints.
    management.cloudfoundry.skip-ssl-validation=false # Whether to skip SSL verification for Cloud Foundry actuator endpoint security calls.
    
    # ENDPOINTS GENERAL CONFIGURATION
    management.endpoints.enabled-by-default= # Whether to enable or disable all endpoints by default.
    
    # ENDPOINTS JMX CONFIGURATION (JmxEndpointProperties)
    management.endpoints.jmx.domain=org.springframework.boot # Endpoints JMX domain name. Fallback to 'spring.jmx.default-domain' if set.
    management.endpoints.jmx.exposure.include=* # Endpoint IDs that should be included or '*' for all.
    management.endpoints.jmx.exposure.exclude= # Endpoint IDs that should be excluded or '*' for all.
    management.endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints.
    
    # ENDPOINTS WEB CONFIGURATION (WebEndpointProperties)
    management.endpoints.web.exposure.include=health,info # Endpoint IDs that should be included or '*' for all.
    management.endpoints.web.exposure.exclude= # Endpoint IDs that should be excluded or '*' for all.
    management.endpoints.web.base-path=/actuator # Base path for Web endpoints. Relative to server.servlet.context-path or management.server.servlet.context-path if management.server.port is configured.
    management.endpoints.web.path-mapping= # Mapping between endpoint IDs and the path that should expose them.
    
    # ENDPOINTS CORS CONFIGURATION (CorsEndpointProperties)
    management.endpoints.web.cors.allow-credentials= # Whether credentials are supported. When not set, credentials are not supported.
    management.endpoints.web.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers.
    management.endpoints.web.cors.allowed-methods= # Comma-separated list of methods to allow. '*' allows all methods. When not set, defaults to GET.
    management.endpoints.web.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled.
    management.endpoints.web.cors.exposed-headers= # Comma-separated list of headers to include in a response.
    management.endpoints.web.cors.max-age=1800s # How long the response from a pre-flight request can be cached by clients. If a duration suffix is not specified, seconds will be used.
    
    # AUDIT EVENTS ENDPOINT (AuditEventsEndpoint)
    management.endpoint.auditevents.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.auditevents.enabled=true # Whether to enable the auditevents endpoint.
    
    # BEANS ENDPOINT (BeansEndpoint)
    management.endpoint.beans.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.beans.enabled=true # Whether to enable the beans endpoint.
    
    # CACHES ENDPOINT (CachesEndpoint)
    management.endpoint.caches.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.caches.enabled=true # Whether to enable the caches endpoint.
    
    # CONDITIONS REPORT ENDPOINT (ConditionsReportEndpoint)
    management.endpoint.conditions.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.conditions.enabled=true # Whether to enable the conditions endpoint.
    
    # CONFIGURATION PROPERTIES REPORT ENDPOINT (ConfigurationPropertiesReportEndpoint, ConfigurationPropertiesReportEndpointProperties)
    management.endpoint.configprops.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.configprops.enabled=true # Whether to enable the configprops endpoint.
    management.endpoint.configprops.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services,sun.java.command # Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.
    
    # ENVIRONMENT ENDPOINT (EnvironmentEndpoint, EnvironmentEndpointProperties)
    management.endpoint.env.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.env.enabled=true # Whether to enable the env endpoint.
    management.endpoint.env.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services,sun.java.command # Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.
    
    # FLYWAY ENDPOINT (FlywayEndpoint)
    management.endpoint.flyway.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.flyway.enabled=true # Whether to enable the flyway endpoint.
    
    # HEALTH ENDPOINT (HealthEndpoint, HealthEndpointProperties)
    management.endpoint.health.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.health.enabled=true # Whether to enable the health endpoint.
    management.endpoint.health.roles= # Roles used to determine whether or not a user is authorized to be shown details. When empty, all authenticated users are authorized.
    management.endpoint.health.show-details=never # When to show full health details.
    
    # HEAP DUMP ENDPOINT (HeapDumpWebEndpoint)
    management.endpoint.heapdump.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.heapdump.enabled=true # Whether to enable the heapdump endpoint.
    
    # HTTP TRACE ENDPOINT (HttpTraceEndpoint)
    management.endpoint.httptrace.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.httptrace.enabled=true # Whether to enable the httptrace endpoint.
    
    # INFO ENDPOINT (InfoEndpoint)
    info= # Arbitrary properties to add to the info endpoint.
    management.endpoint.info.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.info.enabled=true # Whether to enable the info endpoint.
    
    # INTEGRATION GRAPH ENDPOINT (IntegrationGraphEndpoint)
    management.endpoint.integrationgraph.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.integrationgraph.enabled=true # Whether to enable the integrationgraph endpoint.
    
    # JOLOKIA ENDPOINT (JolokiaProperties)
    management.endpoint.jolokia.config.*= # Jolokia settings. Refer to the documentation of Jolokia for more details.
    management.endpoint.jolokia.enabled=true # Whether to enable the jolokia endpoint.
    
    # LIQUIBASE ENDPOINT (LiquibaseEndpoint)
    management.endpoint.liquibase.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.liquibase.enabled=true # Whether to enable the liquibase endpoint.
    
    # LOG FILE ENDPOINT (LogFileWebEndpoint, LogFileWebEndpointProperties)
    management.endpoint.logfile.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.logfile.enabled=true # Whether to enable the logfile endpoint.
    management.endpoint.logfile.external-file= # External Logfile to be accessed. Can be used if the logfile is written by output redirect and not by the logging system itself.
    
    # LOGGERS ENDPOINT (LoggersEndpoint)
    management.endpoint.loggers.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.loggers.enabled=true # Whether to enable the loggers endpoint.
    
    # REQUEST MAPPING ENDPOINT  (MappingsEndpoint)
    management.endpoint.mappings.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.mappings.enabled=true # Whether to enable the mappings endpoint.
    
    # METRICS ENDPOINT (MetricsEndpoint)
    management.endpoint.metrics.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.metrics.enabled=true # Whether to enable the metrics endpoint.
    
    # PROMETHEUS ENDPOINT (PrometheusScrapeEndpoint)
    management.endpoint.prometheus.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.prometheus.enabled=true # Whether to enable the prometheus endpoint.
    
    # SCHEDULED TASKS ENDPOINT (ScheduledTasksEndpoint)
    management.endpoint.scheduledtasks.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.scheduledtasks.enabled=true # Whether to enable the scheduledtasks endpoint.
    
    # SESSIONS ENDPOINT (SessionsEndpoint)
    management.endpoint.sessions.enabled=true # Whether to enable the sessions endpoint.
    
    # SHUTDOWN ENDPOINT (ShutdownEndpoint)
    management.endpoint.shutdown.enabled=false # Whether to enable the shutdown endpoint.
    
    # THREAD DUMP ENDPOINT (ThreadDumpEndpoint)
    management.endpoint.threaddump.cache.time-to-live=0ms # Maximum time that a response can be cached.
    management.endpoint.threaddump.enabled=true # Whether to enable the threaddump endpoint.
    
    # HEALTH INDICATORS
    management.health.db.enabled=true # Whether to enable database health check.
    management.health.cassandra.enabled=true # Whether to enable Cassandra health check.
    management.health.couchbase.enabled=true # Whether to enable Couchbase health check.
    management.health.defaults.enabled=true # Whether to enable default health indicators.
    management.health.diskspace.enabled=true # Whether to enable disk space health check.
    management.health.diskspace.path= # Path used to compute the available disk space.
    management.health.diskspace.threshold=10MB # Minimum disk space that should be available.
    management.health.elasticsearch.enabled=true # Whether to enable Elasticsearch health check.
    management.health.elasticsearch.indices= # Comma-separated index names.
    management.health.elasticsearch.response-timeout=100ms # Time to wait for a response from the cluster.
    management.health.influxdb.enabled=true # Whether to enable InfluxDB health check.
    management.health.jms.enabled=true # Whether to enable JMS health check.
    management.health.ldap.enabled=true # Whether to enable LDAP health check.
    management.health.mail.enabled=true # Whether to enable Mail health check.
    management.health.mongo.enabled=true # Whether to enable MongoDB health check.
    management.health.neo4j.enabled=true # Whether to enable Neo4j health check.
    management.health.rabbit.enabled=true # Whether to enable RabbitMQ health check.
    management.health.redis.enabled=true # Whether to enable Redis health check.
    management.health.solr.enabled=true # Whether to enable Solr health check.
    management.health.status.http-mapping= # Mapping of health statuses to HTTP status codes. By default, registered health statuses map to sensible defaults (for example, UP maps to 200).
    management.health.status.order=DOWN,OUT_OF_SERVICE,UP,UNKNOWN # Comma-separated list of health statuses in order of severity.
    
    # HTTP TRACING (HttpTraceProperties)
    management.trace.http.enabled=true # Whether to enable HTTP request-response tracing.
    management.trace.http.include=request-headers,response-headers,cookies,errors # Items to be included in the trace.
    
    # INFO CONTRIBUTORS (InfoContributorProperties)
    management.info.build.enabled=true # Whether to enable build info.
    management.info.defaults.enabled=true # Whether to enable default info contributors.
    management.info.env.enabled=true # Whether to enable environment info.
    management.info.git.enabled=true # Whether to enable git info.
    management.info.git.mode=simple # Mode to use to expose git information.
    
    # METRICS
    management.metrics.distribution.maximum-expected-value.*= # Maximum value that meter IDs starting-with the specified name are expected to observe.
    management.metrics.distribution.minimum-expected-value.*= # Minimum value that meter IDs starting-with the specified name are expected to observe.
    management.metrics.distribution.percentiles.*= # Specific computed non-aggregable percentiles to ship to the backend for meter IDs starting-with the specified name.
    management.metrics.distribution.percentiles-histogram.*= # Whether meter IDs starting with the specified name should publish percentile histograms.
    management.metrics.distribution.sla.*= # Specific SLA boundaries for meter IDs starting-with the specified name. The longest match wins.
    management.metrics.enable.*= # Whether meter IDs starting-with the specified name should be enabled. The longest match wins, the key `all` can also be used to configure all meters.
    management.metrics.export.appoptics.api-token= # AppOptics API token.
    management.metrics.export.appoptics.batch-size=500 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.appoptics.connect-timeout=5s # Connection timeout for requests to this backend.
    management.metrics.export.appoptics.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.appoptics.host-tag=instance # Tag that will be mapped to "@host" when shipping metrics to AppOptics.
    management.metrics.export.appoptics.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.appoptics.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.appoptics.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.appoptics.uri=https://api.appoptics.com/v1/measurements # URI to ship metrics to.
    management.metrics.export.atlas.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.atlas.config-refresh-frequency=10s # Frequency for refreshing config settings from the LWC service.
    management.metrics.export.atlas.config-time-to-live=150s # Time to live for subscriptions from the LWC service.
    management.metrics.export.atlas.config-uri=http://localhost:7101/lwc/api/v1/expressions/local-dev # URI for the Atlas LWC endpoint to retrieve current subscriptions.
    management.metrics.export.atlas.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.atlas.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.atlas.eval-uri=http://localhost:7101/lwc/api/v1/evaluate # URI for the Atlas LWC endpoint to evaluate the data for a subscription.
    management.metrics.export.atlas.lwc-enabled=false # Whether to enable streaming to Atlas LWC.
    management.metrics.export.atlas.meter-time-to-live=15m # Time to live for meters that do not have any activity. After this period the meter will be considered expired and will not get reported.
    management.metrics.export.atlas.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.atlas.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.atlas.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.atlas.uri=http://localhost:7101/api/v1/publish # URI of the Atlas server.
    management.metrics.export.datadog.api-key= # Datadog API key.
    management.metrics.export.datadog.application-key= # Datadog application key. Not strictly required, but improves the Datadog experience by sending meter descriptions, types, and base units to Datadog.
    management.metrics.export.datadog.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.datadog.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.datadog.descriptions=true # Whether to publish descriptions metadata to Datadog. Turn this off to minimize the amount of metadata sent.
    management.metrics.export.datadog.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.datadog.host-tag=instance # Tag that will be mapped to "host" when shipping metrics to Datadog.
    management.metrics.export.datadog.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.datadog.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.datadog.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.datadog.uri=https://app.datadoghq.com # URI to ship metrics to. If you need to publish metrics to an internal proxy en-route to Datadog, you can define the location of the proxy with this.
    management.metrics.export.dynatrace.api-token= # Dynatrace authentication token.
    management.metrics.export.dynatrace.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.dynatrace.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.dynatrace.device-id= # ID of the custom device that is exporting metrics to Dynatrace.
    management.metrics.export.dynatrace.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.dynatrace.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.dynatrace.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.dynatrace.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.dynatrace.technology-type=java # Technology type for exported metrics. Used to group metrics under a logical technology name in the Dynatrace UI.
    management.metrics.export.dynatrace.uri= # URI to ship metrics to. Should be used for SaaS, self managed instances or to en-route through an internal proxy.
    management.metrics.export.elastic.auto-create-index=true # Whether to create the index automatically if it does not exist.
    management.metrics.export.elastic.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.elastic.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.elastic.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.elastic.host=http://localhost:9200 # Host to export metrics to.
    management.metrics.export.elastic.index=metrics # Index to export metrics to.
    management.metrics.export.elastic.index-date-format=yyyy-MM # Index date format used for rolling indices. Appended to the index name, preceded by a '-'.
    management.metrics.export.elastic.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.elastic.password= # Login password of the Elastic server.
    management.metrics.export.elastic.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.elastic.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.elastic.timestamp-field-name=@timestamp # Name of the timestamp field.
    management.metrics.export.elastic.user-name= # Login user of the Elastic server.
    management.metrics.export.ganglia.addressing-mode=multicast # UDP addressing mode, either unicast or multicast.
    management.metrics.export.ganglia.duration-units=milliseconds # Base time unit used to report durations.
    management.metrics.export.ganglia.enabled=true # Whether exporting of metrics to Ganglia is enabled.
    management.metrics.export.ganglia.host=localhost # Host of the Ganglia server to receive exported metrics.
    management.metrics.export.ganglia.port=8649 # Port of the Ganglia server to receive exported metrics.
    management.metrics.export.ganglia.protocol-version=3.1 # Ganglia protocol version. Must be either 3.1 or 3.0.
    management.metrics.export.ganglia.rate-units=seconds # Base time unit used to report rates.
    management.metrics.export.ganglia.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.ganglia.time-to-live=1 # Time to live for metrics on Ganglia. Set the multi-cast Time-To-Live to be one greater than the number of hops (routers) between the hosts.
    management.metrics.export.graphite.duration-units=milliseconds # Base time unit used to report durations.
    management.metrics.export.graphite.enabled=true # Whether exporting of metrics to Graphite is enabled.
    management.metrics.export.graphite.host=localhost # Host of the Graphite server to receive exported metrics.
    management.metrics.export.graphite.port=2004 # Port of the Graphite server to receive exported metrics.
    management.metrics.export.graphite.protocol=pickled # Protocol to use while shipping data to Graphite.
    management.metrics.export.graphite.rate-units=seconds # Base time unit used to report rates.
    management.metrics.export.graphite.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.graphite.tags-as-prefix= # For the default naming convention, turn the specified tag keys into part of the metric prefix.
    management.metrics.export.humio.api-token= # Humio API token.
    management.metrics.export.humio.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.humio.connect-timeout=5s # Connection timeout for requests to this backend.
    management.metrics.export.humio.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.humio.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.humio.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.humio.repository=sandbox # Name of the repository to publish metrics to.
    management.metrics.export.humio.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.humio.tags.*= # Humio tags describing the data source in which metrics will be stored. Humio tags are a distinct concept from Micrometer's tags. Micrometer's tags are used to divide metrics along dimensional boundaries.
    management.metrics.export.humio.uri=https://cloud.humio.com # URI to ship metrics to. If you need to publish metrics to an internal proxy en-route to Humio, you can define the location of the proxy with this.
    management.metrics.export.influx.auto-create-db=true # Whether to create the Influx database if it does not exist before attempting to publish metrics to it.
    management.metrics.export.influx.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.influx.compressed=true # Whether to enable GZIP compression of metrics batches published to Influx.
    management.metrics.export.influx.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.influx.consistency=one # Write consistency for each point.
    management.metrics.export.influx.db=mydb # Tag that will be mapped to "host" when shipping metrics to Influx.
    management.metrics.export.influx.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.influx.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.influx.password= # Login password of the Influx server.
    management.metrics.export.influx.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.influx.retention-duration= # Time period for which Influx should retain data in the current database.
    management.metrics.export.influx.retention-shard-duration= # Time range covered by a shard group.
    management.metrics.export.influx.retention-policy= # Retention policy to use (Influx writes to the DEFAULT retention policy if one is not specified).
    management.metrics.export.influx.retention-replication-factor= # How many copies of the data are stored in the cluster.
    management.metrics.export.influx.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.influx.uri=http://localhost:8086 # URI of the Influx server.
    management.metrics.export.influx.user-name= # Login user of the Influx server.
    management.metrics.export.jmx.domain=metrics # Metrics JMX domain name.
    management.metrics.export.jmx.enabled=true # Whether exporting of metrics to JMX is enabled.
    management.metrics.export.jmx.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.kairos.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.kairos.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.kairos.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.kairos.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.kairos.password= # Login password of the KairosDB server.
    management.metrics.export.kairos.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.kairos.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.kairos.uri= localhost:8080/api/v1/datapoints # URI of the KairosDB server.
    management.metrics.export.kairos.user-name= # Login user of the KairosDB server.
    management.metrics.export.newrelic.account-id= # New Relic account ID.
    management.metrics.export.newrelic.api-key= # New Relic API key.
    management.metrics.export.newrelic.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.newrelic.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.newrelic.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.newrelic.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.newrelic.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.newrelic.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.newrelic.uri=https://insights-collector.newrelic.com # URI to ship metrics to.
    management.metrics.export.prometheus.descriptions=true # Whether to enable publishing descriptions as part of the scrape payload to Prometheus. Turn this off to minimize the amount of data sent on each scrape.
    management.metrics.export.prometheus.enabled=true # Whether exporting of metrics to Prometheus is enabled.
    management.metrics.export.prometheus.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.prometheus.pushgateway.base-url=localhost:9091 # Base URL for the Pushgateway.
    management.metrics.export.prometheus.pushgateway.enabled=false # Enable publishing via a Prometheus Pushgateway.
    management.metrics.export.prometheus.pushgateway.grouping-key= # Grouping key for the pushed metrics.
    management.metrics.export.prometheus.pushgateway.job= # Job identifier for this application instance.
    management.metrics.export.prometheus.pushgateway.push-rate=1m # Frequency with which to push metrics.
    management.metrics.export.prometheus.pushgateway.shutdown-operation= # Operation that should be performed on shutdown.
    management.metrics.export.signalfx.access-token= # SignalFX access token.
    management.metrics.export.signalfx.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.signalfx.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.signalfx.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.signalfx.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.signalfx.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.signalfx.source= # Uniquely identifies the app instance that is publishing metrics to SignalFx. Defaults to the local host name.
    management.metrics.export.signalfx.step=10s # Step size (i.e. reporting frequency) to use.
    management.metrics.export.signalfx.uri=https://ingest.signalfx.com # URI to ship metrics to.
    management.metrics.export.simple.enabled=true # Whether, in the absence of any other exporter, exporting of metrics to an in-memory backend is enabled.
    management.metrics.export.simple.mode=cumulative # Counting mode.
    management.metrics.export.simple.step=1m # Step size (i.e. reporting frequency) to use.
    management.metrics.export.statsd.enabled=true # Whether exporting of metrics to StatsD is enabled.
    management.metrics.export.statsd.flavor=datadog # StatsD line protocol to use.
    management.metrics.export.statsd.host=localhost # Host of the StatsD server to receive exported metrics.
    management.metrics.export.statsd.max-packet-length=1400 # Total length of a single payload should be kept within your network's MTU.
    management.metrics.export.statsd.polling-frequency=10s # How often gauges will be polled. When a gauge is polled, its value is recalculated and if the value has changed (or publishUnchangedMeters is true), it is sent to the StatsD server.
    management.metrics.export.statsd.port=8125 # Port of the StatsD server to receive exported metrics.
    management.metrics.export.statsd.publish-unchanged-meters=true # Whether to send unchanged meters to the StatsD server.
    management.metrics.export.wavefront.api-token= # API token used when publishing metrics directly to the Wavefront API host.
    management.metrics.export.wavefront.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
    management.metrics.export.wavefront.connect-timeout=1s # Connection timeout for requests to this backend.
    management.metrics.export.wavefront.enabled=true # Whether exporting of metrics to this backend is enabled.
    management.metrics.export.wavefront.global-prefix= # Global prefix to separate metrics originating from this app's white box instrumentation from those originating from other Wavefront integrations when viewed in the Wavefront UI.
    management.metrics.export.wavefront.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
    management.metrics.export.wavefront.read-timeout=10s # Read timeout for requests to this backend.
    management.metrics.export.wavefront.source= # Unique identifier for the app instance that is the source of metrics being published to Wavefront. Defaults to the local host name.
    management.metrics.export.wavefront.step=10s # Step size (i.e. reporting frequency) to use.
    management.metrics.export.wavefront.uri=https://longboard.wavefront.com # URI to ship metrics to.
    management.metrics.use-global-registry=true # Whether auto-configured MeterRegistry implementations should be bound to the global static registry on Metrics.
    management.metrics.tags.*= # Common tags that are applied to every meter.
    management.metrics.web.client.max-uri-tags=100 # Maximum number of unique URI tag values allowed. After the max number of tag values is reached, metrics with additional tag values are denied by filter.
    management.metrics.web.client.requests-metric-name=http.client.requests # Name of the metric for sent requests.
    management.metrics.web.server.auto-time-requests=true # Whether requests handled by Spring MVC, WebFlux or Jersey should be automatically timed.
    management.metrics.web.server.max-uri-tags=100 # Maximum number of unique URI tag values allowed. After the max number of tag values is reached, metrics with additional tag values are denied by filter.
    management.metrics.web.server.requests-metric-name=http.server.requests # Name of the metric for received requests.
    
    
    # ----------------------------------------
    # DEVTOOLS PROPERTIES
    # ----------------------------------------
    
    # DEVTOOLS (DevToolsProperties)
    spring.devtools.add-properties=true # Whether to enable development property defaults.
    spring.devtools.livereload.enabled=true # Whether to enable a livereload.com-compatible server.
    spring.devtools.livereload.port=35729 # Server port.
    spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart.
    spring.devtools.restart.additional-paths= # Additional paths to watch for changes.
    spring.devtools.restart.enabled=true # Whether to enable automatic restart.
    spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties,META-INF/build-info.properties # Patterns that should be excluded from triggering a full restart.
    spring.devtools.restart.log-condition-evaluation-delta=true # Whether to log the condition evaluation delta upon restart.
    spring.devtools.restart.poll-interval=1s # Amount of time to wait between polling for classpath changes.
    spring.devtools.restart.quiet-period=400ms # Amount of quiet time required without any classpath changes before a restart is triggered.
    spring.devtools.restart.trigger-file= # Name of a specific file that, when changed, triggers the restart check. If not specified, any classpath file change triggers the restart.
    
    # REMOTE DEVTOOLS (RemoteDevToolsProperties)
    spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection.
    spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application.
    spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application.
    spring.devtools.remote.restart.enabled=true # Whether to enable remote restart.
    spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support).
    spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret.
    
    
    # ----------------------------------------
    # TESTING PROPERTIES
    # ----------------------------------------
    
    spring.test.database.replace=any # Type of existing DataSource to replace.
    spring.test.mockmvc.print=default # MVC Print option.