conky安装配置

深藏阁楼爱情的钟 2022-01-23 04:55 261阅读 0赞

**目录**

安装conky

修改配置

设置开机启动：

conky 点击桌面就消失的解决办法

--------------------

## 安装conky ##

sudo apt-get install conky-all

sudo dnf install conky*        //Fedora

## 修改配置 ##

在主目录下创建’.conkyrc’

文件内容：

# set to yes if you want Conky to be forked in the background
    background no
    cpu_avg_samples 2
    net_avg_samples 2
    out_to_console no
    # X font when Xft is disabled, you can pick one with program xfontsel
    #font 7x12
    #font 6x10
    #font 7x13
    #font 8x13
    #font 7x12
    #font *mintsmild.se*
    #font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
    #font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
    # Use Xft?
    use_xft yes
    # Xft font when Xft is enabled
    xftfont Sans:size=11  
    own_window_argb_visual yes
    #own_window_colour hotpink
    # Text alpha when using Xft
    xftalpha 0.8
    # on_bottom yes
    # mail spool
    # mail_spool $MAIL
    # Update interval in seconds
    update_interval 1
    # Create own window instead of using desktop (required in nautilus)
    own_window yes
    own_window_transparent yes
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    #own_window_type override
    own_window_type desktop
    # Use double buffering (reduces flicker, may not work for everyone)
    double_buffer yes
    # Minimum size of text area
    minimum_size 260 5
    maximum_width 400
    # Draw shades?
    draw_shades no
    # Draw outlines?
    draw_outline no
    # Draw borders around text
    draw_borders no
    # Stippled borders?
    stippled_borders no
    # border margins
    # border_margin 4
    # border width
    border_width 1
    # Default colors and also border colors
    default_color white
    default_shade_color white
    default_outline_color white
    # Text alignment, other possible values are commented
    #alignment top_left
    #minimum_size 10 10
    gap_x 10
    gap_y 35
    alignment top_right
    #alignment bottom_left
    #alignment bottom_right
    # Gap between borders of screen and text
    # Add spaces to keep things from moving about?  This only affects
    # certain objects.
    use_spacer none
    # Subtract file system buffers from used memory?
    no_buffers yes
    # set to yes if you want all text to be in uppercase
    uppercase no
    # none, xmms, bmp, audacious, infopipe (default is none)
    # xmms_player bmp
    
    
    TEXT
    ${color #0277BD}SYSTEM ${hr 1}
    #Time:$alignr${time %Y.%m.%d}$alignc   ${time %H:%M:%S}$alignr   Week:${time %w}
    Hostname: $alignr$nodename
    Kernel: $alignr$kernel
    Machine:$alignr$machine
    Uptime: $alignr$uptime
    Temp: ${alignr}${acpitemp} °C
    Battery:$alignr${battery BAT0}
    #Battery:$alignr${battery_percent BAT0}%  
    ###############
    ${color #006064}NETWORK ${hr 1}
    IP:${addr wlp5s0}
    GateWay:$gw_ip
    Down ${downspeed wlp5s0} /s ${alignr}Up ${upspeed wlp5s0} /s
    #${downspeedgraph wlp5s0 25,107} ${alignr}${upspeedgraph wlp5s0 25,107}
    Total ${totaldown wlp5s0} ${alignr}Total ${totalup wlp5s0}
    #############
    ${color #26C6DA}MEMORY ${hr 1}
    Ram ${alignr}$mem / $memmax ($memperc%)
    ${membar 4}
    swap ${alignr}$swap / $swapmax ($swapperc%)
    ${swapbar 4}
    Highest MEM $alignr MEM%
    ${top_mem name 1}$alignr ${top_mem mem 1}
    ${top_mem name 2}$alignr ${top_mem mem 2}
    ${top_mem name 3}$alignr ${top_mem mem 3}
    ##############
    ${color #FF9800}CPU ${hr 1}
    Frequency: ${alignr}${freq dyn} MHz
    Processes: ${alignr}$processes ($running_processes running)
    Load: ${alignr}$loadavg
    CPU1 ${alignr}${cpu cpu1}%
    ${cpubar 4 cpu1}
    CPU2 ${alignr}${cpu cpu2}%
    ${cpubar 4 cpu2}
    Highest CPU $alignr CPU%
    ${top name 1}$alignr${top cpu 1}
    ${top name 2}$alignr${top cpu 2}
    ${top name 3}$alignr${top cpu 3}
    ##############
    ${color #00BFA5}FILE SYSTEM ${hr 1}
    Disk I/O:$diskio
    Root: ${alignr}${fs_free /} / ${fs_size /}
    ${fs_bar 4 /}
    Home: ${alignr}${fs_free /home} / ${fs_size /home}
    ${fs_bar 4 /home}
    #############

效果：

conky

![20190602153535893.png][]

## 设置开机启动： ##

在bin目录下创建一个conky.sh文件，内容：

#!/bin#!/bin/bash
    sleep 10 && conky/bash
    sleep 10 && conky

给权限： chmod 777 conky.schmod 777 conky.shh  
加入开机启动的选项中。

我的conky配置文件是在home下的.conkyrc  
打开.bash\_profile，添加  
\# run conky  
pkill conky  
conky -c ~/.conkyrc &  
然后就成功了

最后注意，开机启动运行/usr/local/share/conkycolors/bin/conkyStart下的文件(gnome-session-properties命令进行开机项配置)。命令运行时会“故意”sleep等待25秒钟，让桌面自动完成后再启动conky。就2行命令：

\#!/bin/bash  
sleep 25 && conky -c ~/.conkycolors/conkyre;

===============Tips========================================================

## [conky 点击桌面就消失的解决办法][conky] ##

own_window_type normal 
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2E5MzI0MzI4NjY_size_16_color_FFFFFF_t_70][]

[20190602153535893.png]: /images/20220123/a3a2d504cf674f45b4a92ad04133ef5a.png
[conky]: https://forum.ubuntu.org.cn/viewtopic.php?p=2966050#p2748517
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2E5MzI0MzI4NjY_size_16_color_FFFFFF_t_70]: /images/20220123/6dccd9cfa72e44348d381cb1cd828011.png