Efficient Use of PostgreSQL Indexes

淡淡的烟草味﹌ 2022-01-11 01:07 242阅读 0赞

转载网址：[https://devcenter.heroku.com/articles/postgresql-indexes][https_devcenter.heroku.com_articles_postgresql-indexes]

### Table of Contents ###

*  [Index Types][]
 *  [Why is my query not using an index?][Why is my query not using an index]
 *  [Partial Indexes][]
 *  [Expression Indexes][]
 *  [Unique Indexes][]
 *  [Multi-column Indexes][]
 *  [B-Trees and sorting][]
 *  [Managing and Maintaining indexes][]

There are many types of indexes in Postgres, as well as different ways to use them. In this article we give an overview of the types of indexes available, and explain different ways of using and maintaining the most common index type: B-Trees.

An index is a way to efficiently retrieve a relatively small number of rows from a table. It is only useful if the number of rows to be retrieved from a table is relatively small (i.e. the condition for retrieving rows - the WHERE clause - is selective). B-Tree indexes are also useful for avoiding sorting.

## [Index Types][] ##

Postgres supports many different index types:

*  *B-Tree* is the default that you get when you do `CREATE INDEX`. Virtually all databases will have some B-tree indexes. The B stands for Balanced, and the idea is that the amount of data on both sides of the tree is roughly the same. Therefore the number of levels that must be traversed to find rows is always in the same ballpark. B-Tree indexes can be used for equality and range queries efficiently. They can operate against all datatypes, and can also be used to retrieve NULL values. Btrees are designed to work very well with caching, even when only partially cached.
 *  *Hash Indexes* are only useful for equality comparisons, but you pretty much never want to use them since they are not transaction safe, need to be manually rebuilt after crashes, and are not replicated to followers, so the advantage over using a B-Tree is rather small.
 *  *[Generalized Inverted Indexes (GIN)][Generalized Inverted Indexes _GIN]* are useful when an index must map many values to one row, whereas B-Tree indexes are optimized for when a row has a single key value. GINs are good for indexing array values as well as for implementing full-text search.
 *  *[Generalized Search Tree (GiST)][Generalized Search Tree _GiST]* indexes allow you to build general balanced tree structures, and can be used for operations beyond equality and range comparisons. They are used to index the geometric data types, as well as full-text search.

This article is about how to get the most out of default B-Tree indexes. For examples of GIN and GiST index usage, refer to the [contrib packages][].

## [Why is my query not using an index?][Why is my query not using an index] ##

There are many reasons why the Postgres planner may choose to not use an index. Most of the time, the planner chooses correctly, even if it isn’t obvious why. It’s okay if the same query uses an index scan on some occasions but not others. The number of rows retrieved from the table may vary based on the particular constant values the query retrieves. So, for example, it might be correct for the query planner to use an index for the query `select * from foo where bar = 1`, and yet not use one for the query `select * from foo where bar = 2`, if there happened to be far more rows with “bar” values of 2. When this happens, a sequential scan is actually most likely much faster than an index scan, so the query planner has in fact correctly judged that the cost of performing the query that way is lower.

## [Partial Indexes][] ##

A partial index covers just a subset of a table’s data. It is an index with a WHERE clause. The idea is to increase the efficiency of the index by reducing its size. A smaller index takes less storage, is easier to maintain, and is faster to scan.

For example, suppose you allow users to flag comments on your site, which in turn sets the `flagged`boolean to true. You then process flagged comments in batches. You may want to create an index like so:

CREATE INDEX articles_flagged_created_at_index ON articles(created_at) WHERE flagged IS TRUE;

This index will remain fairly small, and can also be used along other indexes on the more complex queries that may require it.

## [Expression Indexes][] ##

Expression indexes are useful for queries that match on some function or modification of your data. Postgres allows you to index the result of that function so that searches become as efficient as searching by raw data values. For example, you may require users to store their email addresses for signing in, but you want case insensitive authentication. In that case it’s possible to store the email address as is, but do searches on `WHERE lower(email) = '<lowercased-email>'`. The only way to use an index in such a query is with an expression index like so:

CREATE INDEX users_lower_email ON users(lower(email));

Another common example is for finding rows for a given date, where we’ve stored timestamps in a datetime field but want to find them by a date casted value. An index like `CREATE INDEX articles_day ON articles ( date(published_at) )` can be used by a query containing `WHERE date(articles.created_at) = date('2011-03-07')`.

## [Unique Indexes][] ##

A unique index guarantees that the table won’t have more than one row with the same value. It’s advantageous to create unique indexes for two reasons: data integrity and performance. Lookups on a unique index are generally very fast.

In terms of data integrity, using a `validates_uniqueness_of` validation on an ActiveModel class does not really guarantee uniqueness because there can and will be concurrent users creating invalid records. Therefore you should always create the constraint at the database level - either with an index or a unique constraint.

There is little distinction between unique indexes and unique constraints. Unique indexes can be though of as lower level, since expression indexes and partial indexes cannot be created as unique constraints. Even partial unique indexes on expressions are possible.

## [Multi-column Indexes][] ##

While Postgres has the ability to create multi-column indexes, it’s important to understand when it makes sense to do so. The Postgres query planner has the ability to combine and use multiple single-column indexes in a multi-column query by performing a bitmap index scan. In general, you can create an index on every column that covers query conditions and in most cases Postgres will use them, so make sure to benchmark and justify the creation of a multi-column index before you create them. As always, indexes come with a cost, and multi-column indexes can only optimize the queries that reference the columns in the index in the same order, while multiple single column indexes provide performance improvements to a larger number of queries.

However there are cases where a multi-column index clearly makes sense. An index on columns `(a, b)` can be used by queries containing `WHERE a = x AND b = y`, or queries using `WHERE a = x` only, but will not be used by a query using `WHERE b = y`. So if this matches the query patterns of your application, the multi-column index approach is worth considering. Also note that in this case creating an index on a alone would be redundant.

## [B-Trees and sorting][] ##

B-Tree index entries are sorted in ascending order by default. In some cases it makes sense to supply a different sort order for an index. Take the case when you’re showing a paginated list of articles, sorted by most recent published first. We may have a `published_at` column on our`articles` table. For unpublished articles, the `published_at` value is NULL.

In this case we can create an index like so:

CREATE INDEX articles_published_at_index ON articles(published_at DESC NULLS LAST);

In Postgres 9.2 and above, it’s of note that indexes are not always required to go to the table, provided we can get everything needed from the index (i.e. no unindexed columns are of interest). This feature is called “Index-only scans”.

Since we will be querying the table in sorted order by `published_at` and limiting the result, we may get some benefit out of creating an index in the same order. Postgres will find the rows it needs from the index in the correct order, and then go to the data blocks to retrieve the data. If the index wasn’t sorted, there’s a good chance that Postgres would read the data blocks sequentially and sort the results.

This technique is mostly relevant with single column indexes when you require “nulls to sort last” behavior, because otherwise the order is already available since an index can be scanned in any direction. It becomes even more relevant when used against a multi-column index when a query requests a mixed sort order, like `a ASC, b DESC`.

## [Managing and Maintaining indexes][] ##

Indexes in Postgres do not hold all row data. Even when an index is used in a query and matching rows where found, Postgres will go to disk to fetch the row data. Additionally, row visibility information (discussed in [the MVCC article][]) is not stored on the index either, therefore Postgres must also go to disk to fetch that information.

Having that in mind, you can see how in some cases using an index doesn’t really make sense. An index must be selective enough to reduce the number of disk lookups for it to be worth it. For example, a primary key lookup with a big enough table makes good use of an index: instead of sequentially scanning the table matching the query conditions, Postgres is able to find the targeted rows in an index, and then fetch them from disk selectively. For very small tables, for example a cities lookup table, an index may be undesirable, even if you search by city name. In that case, Postgres may decide to ignore the index in favor of a sequential scan. Postgres will decide to perform a sequential scan on any query that will hit a significant portion of a table. If you do have an index on that column, it will be a dead index that’s never used - and indexes are not free: they come at a cost in terms of storage and maintenance.

For more on running production, staging, and other environments for your Heroku application, take a look at our [Managing Multiple Environments][] article.

When tuning a query and understanding what indexes make the most sense, never try to it on your development machine. Whether an index is used or not depends on a number of factors, including the Postgres server configuration, the data in the table, the index and the query. For instance, trying to make a query use an index on your development machine with a small subset of “test data” will be frustrating: Postgres will determine that the dataset is so small that it’s not worth the overhead of reading through the index and then fetching the data from disk. Random I/O is much slower than sequential, so the cost of a sequential scan is lower than that of the random I/O introduced by reading the index and selectively finding the data on disk. Performing index tuning should be done on production, or on a staging environment that is as close to production as possible. On the Heroku Postgres database platform it is possible to copy your production database to a different environment [quite easily][].

When you are ready to apply an index on your production database, keep in mind that creating an index locks the table against writes. For big tables that can mean your site is down for hours. Fortunately Postgres allows you to `CREATE INDEX CONCURRENTLY`, which will take much longer to build, but does not require a lock that blocks writes. Ordinary `CREATE INDEX` commands require a lock that blocks writes but not reads.

Finally, indexes will become fragmented and unoptimized after some time, especially if the rows in the table are often updated or deleted. In those cases it may be required to perform a [`REINDEX`][REINDEX]leaving you with a balanced and optimized index. However be cautious about reindexing big indexes as write locks are obtained on the parent table. One strategy to achieve the same result on a live site is to build an index concurrently on the same table and columns but with a different name, and then dropping the original index and renaming the new one. This procedure, while much longer, won’t require any long running locks on the live tables.

Postgres provides a lot of flexibility when it comes to creating B-tree indexes that are optimized to your specific use cases, as well as options for managing the ever-growing database behind your applications. These tips should help you keep your database healthy, and your queries snappy.

转载于:https://blog.51cto.com/heyiyi/1785069

[https_devcenter.heroku.com_articles_postgresql-indexes]: https://devcenter.heroku.com/articles/postgresql-indexes
[Index Types]: https://devcenter.heroku.com/articles/postgresql-indexes#index-types
[Why is my query not using an index]: https://devcenter.heroku.com/articles/postgresql-indexes#why-is-my-query-not-using-an-index
[Partial Indexes]: https://devcenter.heroku.com/articles/postgresql-indexes#partial-indexes
[Expression Indexes]: https://devcenter.heroku.com/articles/postgresql-indexes#expression-indexes
[Unique Indexes]: https://devcenter.heroku.com/articles/postgresql-indexes#unique-indexes
[Multi-column Indexes]: https://devcenter.heroku.com/articles/postgresql-indexes#multi-column-indexes
[B-Trees and sorting]: https://devcenter.heroku.com/articles/postgresql-indexes#b-trees-and-sorting
[Managing and Maintaining indexes]: https://devcenter.heroku.com/articles/postgresql-indexes#managing-and-maintaining-indexes
[Generalized Inverted Indexes _GIN]: http://www.postgresql.org/docs/current/static/gin.html
[Generalized Search Tree _GiST]: http://www.postgresql.org/docs/current/static/gist.html
[contrib packages]: http://www.postgresql.org/docs/current/static/contrib.html
[the MVCC article]: https://devcenter.heroku.com/articles/postgresql-concurrency
[Managing Multiple Environments]: https://devcenter.heroku.com/articles/multiple-environments
[quite easily]: https://devcenter.heroku.com/articles/heroku-postgres-import-export#export
[REINDEX]: http://www.postgresql.org/docs/current/static/sql-reindex.html