FFmpeg:intel核显vaapi驱动安装记录

比眉伴天荒 2021-11-27 04:40 2917阅读 0赞

## FFmpeg:intel核显vaapi驱动安装 ##

### 文章目录 ###

*   *  FFmpeg:intel核显vaapi驱动安装
     *   *  media-driver
         *  libva
         *  libdrm
         *   *  sudo apt-get install xutils-dev
             *  sudo apt-get install libpciaccess-dev
         *  git clone https://github.com/intel/gmmlib.git
         *  vaninfo&libva 配置
         *  ffmpeg

--------------------

主要需要安装media-driver和它的依赖。  
开源，在github上

### media-driver ###

https://github.com/intel/media-driver 上下下来后，切下版本分支， 然后cmake直接编。

– The C compiler identification is GNU 8.3.0  
– The CXX compiler identification is GNU 8.3.0  
– Check for working C compiler: /usr/bin/cc  
– Check for working C compiler: /usr/bin/cc – works  
– Detecting C compiler ABI info  
– Detecting C compiler ABI info - done  
– Detecting C compile features  
– Detecting C compile features - done  
– Check for working CXX compiler: /usr/bin/c++  
– Check for working CXX compiler: /usr/bin/c++ – works  
– Detecting CXX compiler ABI info  
– Detecting CXX compiler ABI info - done  
– Detecting CXX compile features  
– Detecting CXX compile features - done  
– CMAKE\_INSTALL\_PREFIX = /usr/local  
– Found PkgConfig: /usr/bin/pkg-config (found version “0.29.1”)  
– Checking for module ‘libva>=1.0.0’  
`-- No package 'libva' found`  
CMake Error at /usr/share/cmake-3.13/Modules/FindPkgConfig.cmake:452 (message):  
A required package was not found  
Call Stack (most recent call first):  
/usr/share/cmake-3.13/Modules/FindPkgConfig.cmake:622 (\_pkg\_check\_modules\_internal)  
cmrtlib/linux/CMakeLists.txt:56 (pkg\_check\_modules)

– Configuring incomplete, errors occurred!

### libva ###

checking for DRM… no  
configure: error: Package requirements`(libdrm >= 2.4)`were not met:

No package ‘libdrm’ found

Consider adjusting the PKG\_CONFIG\_PATH environment variable if you  
installed software in a non-standard prefix.

Alternatively, you may set the environment variables DRM\_CFLAGS  
and DRM\_LIBS to avoid the need to call pkg-config.  
See the pkg-config man page for more details.

### libdrm ###

autoreconf: Entering directory .  
autoreconf: configure.ac: not using Gettext  
autoreconf: running: aclocal --force -I m4 $\{ACLOCAL\_FLAGS\}  
`configure.ac:34: error: must install xorg-macros 1.12 or later before running autoconf/autogen`  
configure.ac:34: the top level  
autom4te: /usr/bin/m4 failed with exit status: 1  
aclocal: error: echo failed with exit status: 1  
autoreconf: aclocal failed with exit status: 1

#### sudo apt-get install xutils-dev ####

checking which warning flags were supported… -Wall -Wextra -Werror=undef -Wsign-compare -Werror-implicit-function-declaration -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wpacked -Wswitch-enum -Wmissing-format-attribute -Wstrict-aliasing=2 -Winit-self -Wdeclaration-after-statement -Wold-style-definition -Wno-unused-parameter -Wno-attributes -Wno-long-long -Winline -Wshadow -Wno-missing-field-initializers  
checking for native atomic primitives… Intel  
checking for PCIACCESS… no  
configure: error: Package requirements (pciaccess >= 0.10) were not met:

`No package 'pciaccess' found`

Consider adjusting the PKG\_CONFIG\_PATH environment variable if you  
installed software in a non-standard prefix.

Alternatively, you may set the environment variables PCIACCESS\_CFLAGS  
and PCIACCESS\_LIBS to avoid the need to call pkg-config.

#### sudo apt-get install libpciaccess-dev ####

这两个库装好后，回来安装media-drive

CMake Error at media\_driver/media\_top\_cmake.cmake:114 (add\_subdirectory):  
add\_subdirectory given source  
“/home/sola/server\_source/vaapi-driv/media-driver/…/gmmlib/Source/GmmLib”  
which is not an existing directory.  
Call Stack (most recent call first):  
media\_driver/CMakeLists.txt:95 (include)

CMake Error at media\_driver/media\_top\_cmake.cmake:117 (message):  
`gmm library not found on the system`  
Call Stack (most recent call first):  
media\_driver/CMakeLists.txt:95 (include)

– Configuring incomplete, errors occurred!

### git clone https://github.com/intel/gmmlib.git ###

clone 一份下来 编译安装

注意 `sudo apt-get install libigdgmm-dev`这样安装的话，最后编译media-drive的时候会出问题。

装完gmm就能编过了，一切完工。

### vaninfo&libva 配置 ###

可以使用vaninfo 查看libva 信息，

然后你可能会遇到这种错误:

libva info: Trying to open /usr/lib/dri/i965\_drv\_video.so  
libva info: va\_openDriver() returns -1  
vaInitialize failed with error code -1 (unknown libva error),exit

你会发现没有 这个 /usr/lib/dri/i965\_drv\_video.so 库文件， 我尝试做了个软连接 然后就能正常工作了  
![在这里插入图片描述][20190723184449543.png]

vainfo
    sola@:~/vaapi-driv/media-driver$ vainfo
    libva info: VA-API version 1.6.0
    libva info: va_getDriverName() returns -1
    libva info: User requested driver 'i965'
    libva info: Trying to open /usr/local/lib/dri/i965_drv_video.so
    libva info: va_openDriver() returns -1
    vaInitialize failed with error code -1 (unknown libva error),exit
    sola@:~/vaapi-driv/media-driver$ 
    sola@:~/vaapi-driv/media-driver$ cd /usr/local/lib/dri/
    sola@:/usr/local/lib/dri$ ls
    iHD_drv_video.so
    sola@:/usr/local/lib/dri$ sudo ln -s iHD_drv_video.so i965_drv_video.so
    sola@:/usr/local/lib/dri$ cd -
    /home/sola/vaapi-driv/media-driver
    sola@:~/vaapi-driv/media-driver$ vainfo
    libva info: VA-API version 1.6.0
    libva info: va_getDriverName() returns -1
    libva info: User requested driver 'i965'
    libva info: Trying to open /usr/local/lib/dri/i965_drv_video.so
    libva info: Found init function __vaDriverInit_1_6
    libva info: va_openDriver() returns 0
    vainfo: VA-API version: 1.6 (libva 2.4.0)
    vainfo: Driver version: Intel iHD driver - 1.0.0
    vainfo: Supported profile and entrypoints
          VAProfileNone                   :	VAEntrypointVideoProc
          VAProfileNone                   :	VAEntrypointStats
          VAProfileMPEG2Simple            :	VAEntrypointVLD
          VAProfileMPEG2Simple            :	VAEntrypointEncSlice
          VAProfileMPEG2Main              :	VAEntrypointVLD
          VAProfileMPEG2Main              :	VAEntrypointEncSlice
          VAProfileH264Main               :	VAEntrypointVLD
          VAProfileH264Main               :	VAEntrypointEncSlice
          VAProfileH264Main               :	VAEntrypointFEI
          VAProfileH264Main               :	VAEntrypointEncSliceLP
          VAProfileH264High               :	VAEntrypointVLD
          VAProfileH264High               :	VAEntrypointEncSlice
          VAProfileH264High               :	VAEntrypointFEI
          VAProfileH264High               :	VAEntrypointEncSliceLP
          VAProfileVC1Simple              :	VAEntrypointVLD
          VAProfileVC1Main                :	VAEntrypointVLD
          VAProfileVC1Advanced            :	VAEntrypointVLD
          VAProfileJPEGBaseline           :	VAEntrypointVLD
          VAProfileJPEGBaseline           :	VAEntrypointEncPicture
          VAProfileH264ConstrainedBaseline:	VAEntrypointVLD
          VAProfileH264ConstrainedBaseline:	VAEntrypointEncSlice
          VAProfileH264ConstrainedBaseline:	VAEntrypointFEI
          VAProfileH264ConstrainedBaseline:	VAEntrypointEncSliceLP
          VAProfileVP8Version0_3          :	VAEntrypointVLD
          VAProfileVP8Version0_3          :	VAEntrypointEncSlice
          VAProfileHEVCMain               :	VAEntrypointVLD
          VAProfileHEVCMain               :	VAEntrypointEncSlice
          VAProfileHEVCMain               :	VAEntrypointFEI
          VAProfileHEVCMain10             :	VAEntrypointVLD
          VAProfileHEVCMain10             :	VAEntrypointEncSlice
          VAProfileVP9Profile0            :	VAEntrypointVLD
          VAProfileVP9Profile2            :	VAEntrypointVLD

但这不是正道呀，google了下发现了下面信息。  
链接 : https://wiki.archlinux.org/index.php/Hardware\_video\_acceleration  
![\[外链图片转存失败(img-wxNWGFAU-1563878316947)(./1563853799447.png)\]][img-wxNWGFAU-1563878316947_._1563853799447.png]

原来我们只需要配置下这个环境变量即可  
`export LIBVA_DRIVER_NAME=iHD`

![\[外链图片转存失败(img-G5IeYAUY-1563878316947)(./1563854095686.png)\]][img-G5IeYAUY-1563878316947_._1563854095686.png]

### ffmpeg ###

最后尝试ffmpeg进行vaapi硬解。

打开 vaapi : `./configure --enable-hwaccel=h264_vaapi --enable-gpl --disable-x86asm --enable-shared`

test : `ffmpeg -v trace -vaapi_device /dev/dri/card0 -i 720p.mp4 -vf 'format=nv12,hwupload' -c:v h264_vaapi output.mp4`

gpu-top

![\[外链图片转存失败(img-GDi6LbXH-1563878316950)(./1563767300504.png)\]][img-GDi6LbXH-1563878316950_._1563767300504.png]

![\[外链图片转存失败(img-7kVVZuFw-1563878316951)(./1563767359744.png)\]][img-7kVVZuFw-1563878316951_._1563767359744.png]

[20190723184449543.png]: /images/20211126/ffb1f27089d942318d0202886fa6a8fb.png
[img-wxNWGFAU-1563878316947_._1563853799447.png]: /images/20211126/8e74e44b141746b381302ad1866dddb0.png
[img-G5IeYAUY-1563878316947_._1563854095686.png]: /images/20211126/07c1326ca86e488d804356500807c546.png
[img-GDi6LbXH-1563878316950_._1563767300504.png]: /images/20211126/25568896724f4c82b46a047857d050b9.png
[img-7kVVZuFw-1563878316951_._1563767359744.png]: /images/20211126/48bf644fa1e74f0f93c53042de61e995.png