Windows Server Core Remote Manage Hyper-V

╰半夏微凉° 2021-11-17 14:10 214阅读 0赞

原帖：[https://serverfault.com/questions/852144/how-do-i-remotely-manage-hyper-v-2016-standalone-via-windows-10][https_serverfault.com_questions_852144_how-do-i-remotely-manage-hyper-v-2016-standalone-via-windows-10]

**Found my specific issue** :) I was using an invalid hostname, and the DNS wasn't resolving properly.

*  WRONG: server-1.local
 *  RIGHT: server-1-local

But on a different note, I also found that the Microsoft doc ([Remotely manage Hyper-V hosts with Hyper-V Manager][]) didn't document all the instructions necessary for me to make things work. It was mostly correct, but was missing one step. So I've attached my manual setup instructions.

**See below for my full setup instructions for remotely managing Hyper-V 2016 via Windows 10 Professional.** My setup involved two separate physical machines - I install both systems from scratch.

**On the Hyper-V server**

1.  Install [Hyper-V Server 2016][] (via GUI)
2.  Set password Note: change following in the terminal gui running `sconfig`
3.  Set computer name (e.g. server-1); note: do NOT use periods
4.  Configure remote management (disabled => enabled)
5.  Remote Desktop (disabled => enabled)
6.  In the Powershell window, run as admin:

Powershell commands:

Enable-PSRemoting
    Enable-WSManCredSSP -Role server

**On the desktop/laptop you're going to manage Hyper-V remotely**

1.  Install Windows 10 Professional/your drivers/your apps (GUI)
2.  Change your network adapter setting
    
     *  If on older patches of Windows 10
        
         *  Click Start > Search "Homegroup" > Launch "Homegroup"
         *  Click on the link to change network type (public => private)
     *  If on newer patches of Windows 10
        
         *  Try this: go to "Start Menu > (type) 'Ethernet' > (click) Ethernet adapter > (click) Private"
3.  Add a DNS entry in your hostfile (run notepad as Administrator)
    
     *  Edit "C:\\Windows\\System32\\drivers\\etc\\hosts"
     *  Add an entry like "192.168.100.2 server-1"
4.  In the Powershell window, run as admin:

Powershell commands:

Enable-PSRemoting
    Set-Item WSMan:\localhost\Client\TrustedHosts -Value server-1
    Enable-WSManCredSSP -Role client -DelegateComputer server-1
    Enable-WindowsOptionalFeature -Online -FeatureName:Microsoft-Hyper-V -All
    cmdkey /add:server-1 /user:Administrator /pass

**Note**

The official Microsoft documentation was missing the **cmdkey** instruction, which registers the login info necessary to get into the Hyper-V server. I found it in a separate doc.

转载于:https://www.cnblogs.com/easyc/p/Windows\_Server\_Core\_2016\_Remote\_Manage\_HyperV.html

[https_serverfault.com_questions_852144_how-do-i-remotely-manage-hyper-v-2016-standalone-via-windows-10]: https://serverfault.com/questions/852144/how-do-i-remotely-manage-hyper-v-2016-standalone-via-windows-10
[Remotely manage Hyper-V hosts with Hyper-V Manager]: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/remotely-manage-hyper-v-hosts
[Hyper-V Server 2016]: https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2016